diff options
Diffstat (limited to 'drivers/pci/quirks.c')
| -rw-r--r-- | drivers/pci/quirks.c | 187 |
1 files changed, 166 insertions, 21 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 5049a47030a..ce098561513 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/acpi.h> #include <linux/kallsyms.h> +#include <linux/dmi.h> #include "pci.h" int isa_dma_bridge_buggy; @@ -605,27 +606,6 @@ static void __init quirk_ioapic_rmw(struct pci_dev *dev) sis_apic_bug = 1; } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw); - -#define AMD8131_revA0 0x01 -#define AMD8131_revB0 0x11 -#define AMD8131_MISC 0x40 -#define AMD8131_NIOAMODE_BIT 0 -static void quirk_amd_8131_ioapic(struct pci_dev *dev) -{ - unsigned char tmp; - - if (nr_ioapics == 0) - return; - - if (dev->revision == AMD8131_revA0 || dev->revision == AMD8131_revB0) { - dev_info(&dev->dev, "Fixing up AMD8131 IOAPIC mode\n"); - pci_read_config_byte( dev, AMD8131_MISC, &tmp); - tmp &= ~(1 << AMD8131_NIOAMODE_BIT); - pci_write_config_byte( dev, AMD8131_MISC, tmp); - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic); -DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic); #endif /* CONFIG_X86_IO_APIC */ /* @@ -1422,6 +1402,155 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); +#ifdef CONFIG_X86_IO_APIC +/* + * Boot interrupts on some chipsets cannot be turned off. For these chipsets, + * remap the original interrupt in the linux kernel to the boot interrupt, so + * that a PCI device's interrupt handler is installed on the boot interrupt + * line instead. + */ +static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) +{ + if (noioapicquirk || noioapicreroute) + return; + + dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; + + printk(KERN_INFO "PCI quirk: reroute interrupts for 0x%04x:0x%04x\n", + dev->vendor, dev->device); + return; +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); + +/* + * On some chipsets we can disable the generation of legacy INTx boot + * interrupts. + */ + +/* + * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no + * 300641-004US, section 5.7.3. + */ +#define INTEL_6300_IOAPIC_ABAR 0x40 +#define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) + +static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) +{ + u16 pci_config_word; + + if (noioapicquirk) + return; + + pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word); + pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; + pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word); + + printk(KERN_INFO "disabled boot interrupt on device 0x%04x:0x%04x\n", + dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); + +/* + * disable boot interrupts on HT-1000 + */ +#define BC_HT1000_FEATURE_REG 0x64 +#define BC_HT1000_PIC_REGS_ENABLE (1<<0) +#define BC_HT1000_MAP_IDX 0xC00 +#define BC_HT1000_MAP_DATA 0xC01 + +static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) +{ + u32 pci_config_dword; + u8 irq; + + if (noioapicquirk) + return; + + pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); + pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | + BC_HT1000_PIC_REGS_ENABLE); + + for (irq = 0x10; irq < 0x10 + 32; irq++) { + outb(irq, BC_HT1000_MAP_IDX); + outb(0x00, BC_HT1000_MAP_DATA); + } + + pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); + + printk(KERN_INFO "disabled boot interrupts on PCI device" + "0x%04x:0x%04x\n", dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); + +/* + * disable boot interrupts on AMD and ATI chipsets + */ +/* + * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 + * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode + * (due to an erratum). + */ +#define AMD_813X_MISC 0x40 +#define AMD_813X_NOIOAMODE (1<<0) + +static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) +{ + u32 pci_config_dword; + + if (noioapicquirk) + return; + + pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); + pci_config_dword &= ~AMD_813X_NOIOAMODE; + pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); + + printk(KERN_INFO "disabled boot interrupts on PCI device " + "0x%04x:0x%04x\n", dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); + +#define AMD_8111_PCI_IRQ_ROUTING 0x56 + +static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) +{ + u16 pci_config_word; + + if (noioapicquirk) + return; + + pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); + if (!pci_config_word) { + printk(KERN_INFO "boot interrupts on PCI device 0x%04x:0x%04x " + "already disabled\n", + dev->vendor, dev->device); + return; + } + pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); + printk(KERN_INFO "disabled boot interrupts on PCI device " + "0x%04x:0x%04x\n", dev->vendor, dev->device); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); +#endif /* CONFIG_X86_IO_APIC */ + /* * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. @@ -1828,6 +1957,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, ht_enable_msi_mapping); +/* The P5N32-SLI Premium motherboard from Asus has a problem with msi + * for the MCP55 NIC. It is not yet determined whether the msi problem + * also affects other devices. As for now, turn off msi for this device. + */ +static void __devinit nvenet_msi_disable(struct pci_dev *dev) +{ + if (dmi_name_in_vendors("P5N32-SLI PREMIUM")) { + dev_info(&dev->dev, + "Disabling msi for MCP55 NIC on P5N32-SLI Premium\n"); + dev->no_msi = 1; + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_NVENET_15, + nvenet_msi_disable); + static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) { struct pci_dev *host_bridge; |