summaryrefslogtreecommitdiffstats
path: root/drivers/pci/quirks.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/quirks.c')
-rw-r--r--drivers/pci/quirks.c218
1 files changed, 62 insertions, 156 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 1e6eda25c0d..3411483240c 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -963,6 +963,13 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_ho
* bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
* becomes necessary to do this tweak in two steps -- I've chosen the Host
* bridge as trigger.
+ *
+ * Note that we used to unhide the SMBus that way on Toshiba laptops
+ * (Satellite A40 and Tecra M2) but then found that the thermal management
+ * was done by SMM code, which could cause unsynchronized concurrent
+ * accesses to the SMBus registers, with potentially bad effects. Thus you
+ * should be very careful when adding new entries: if SMM is accessing the
+ * Intel SMBus, this is a very good reason to leave it hidden.
*/
static int asus_hides_smbus;
@@ -1040,17 +1047,6 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
case 0x099c: /* HP Compaq nx6110 */
asus_hides_smbus = 1;
}
- } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) {
- if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
- switch(dev->subsystem_device) {
- case 0x0001: /* Toshiba Satellite A40 */
- asus_hides_smbus = 1;
- }
- else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
- switch(dev->subsystem_device) {
- case 0x0001: /* Toshiba Tecra M2 */
- asus_hides_smbus = 1;
- }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
@@ -1218,45 +1214,68 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_a
* do this early on to make the additional device appear during
* the PCI scanning.
*/
-
-static void quirk_jmicron_dualfn(struct pci_dev *pdev)
+static void quirk_jmicron_ata(struct pci_dev *pdev)
{
- u32 conf;
+ u32 conf1, conf5, class;
u8 hdr;
/* Only poke fn 0 */
if (PCI_FUNC(pdev->devfn))
return;
- switch(pdev->device) {
- case PCI_DEVICE_ID_JMICRON_JMB365:
- case PCI_DEVICE_ID_JMICRON_JMB366:
- /* Redirect IDE second PATA port to the right spot */
- pci_read_config_dword(pdev, 0x80, &conf);
- conf |= (1 << 24);
- /* Fall through */
- pci_write_config_dword(pdev, 0x80, conf);
- case PCI_DEVICE_ID_JMICRON_JMB361:
- case PCI_DEVICE_ID_JMICRON_JMB363:
- pci_read_config_dword(pdev, 0x40, &conf);
- /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
- /* Set the class codes correctly and then direct IDE 0 */
- conf &= ~0x000FF200; /* Clear bit 9 and 12-19 */
- conf |= 0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */
- pci_write_config_dword(pdev, 0x40, conf);
-
- /* Reconfigure so that the PCI scanner discovers the
- device is now multifunction */
-
- pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
- pdev->hdr_type = hdr & 0x7f;
- pdev->multifunction = !!(hdr & 0x80);
+ pci_read_config_dword(pdev, 0x40, &conf1);
+ pci_read_config_dword(pdev, 0x80, &conf5);
- break;
+ conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */
+ conf5 &= ~(1 << 24); /* Clear bit 24 */
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_JMICRON_JMB360:
+ /* The controller should be in single function ahci mode */
+ conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
+ break;
+
+ case PCI_DEVICE_ID_JMICRON_JMB365:
+ case PCI_DEVICE_ID_JMICRON_JMB366:
+ /* Redirect IDE second PATA port to the right spot */
+ conf5 |= (1 << 24);
+ /* Fall through */
+ case PCI_DEVICE_ID_JMICRON_JMB361:
+ case PCI_DEVICE_ID_JMICRON_JMB363:
+ /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
+ /* Set the class codes correctly and then direct IDE 0 */
+ conf1 |= 0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */
+ break;
+
+ case PCI_DEVICE_ID_JMICRON_JMB368:
+ /* The controller should be in single function IDE mode */
+ conf1 |= 0x00C00000; /* Set 22, 23 */
+ break;
}
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
+
+ pci_write_config_dword(pdev, 0x40, conf1);
+ pci_write_config_dword(pdev, 0x80, conf5);
+
+ /* Update pdev accordingly */
+ pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
+ pdev->hdr_type = hdr & 0x7f;
+ pdev->multifunction = !!(hdr & 0x80);
+
+ pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class);
+ pdev->class = class >> 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
#endif
@@ -1284,119 +1303,6 @@ static void __init quirk_alder_ioapic(struct pci_dev *pdev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic );
#endif
-enum ide_combined_type { COMBINED = 0, IDE = 1, LIBATA = 2 };
-/* Defaults to combined */
-static enum ide_combined_type combined_mode;
-
-static int __init combined_setup(char *str)
-{
- if (!strncmp(str, "ide", 3))
- combined_mode = IDE;
- else if (!strncmp(str, "libata", 6))
- combined_mode = LIBATA;
- else /* "combined" or anything else defaults to old behavior */
- combined_mode = COMBINED;
-
- return 1;
-}
-__setup("combined_mode=", combined_setup);
-
-#ifdef CONFIG_SATA_INTEL_COMBINED
-static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev)
-{
- u8 prog, comb, tmp;
- int ich = 0;
-
- /*
- * Narrow down to Intel SATA PCI devices.
- */
- switch (pdev->device) {
- /* PCI ids taken from drivers/scsi/ata_piix.c */
- case 0x24d1:
- case 0x24df:
- case 0x25a3:
- case 0x25b0:
- ich = 5;
- break;
- case 0x2651:
- case 0x2652:
- case 0x2653:
- case 0x2680: /* ESB2 */
- ich = 6;
- break;
- case 0x27c0:
- case 0x27c4:
- ich = 7;
- break;
- case 0x2828: /* ICH8M */
- ich = 8;
- break;
- default:
- /* we do not handle this PCI device */
- return;
- }
-
- /*
- * Read combined mode register.
- */
- pci_read_config_byte(pdev, 0x90, &tmp); /* combined mode reg */
-
- if (ich == 5) {
- tmp &= 0x6; /* interesting bits 2:1, PATA primary/secondary */
- if (tmp == 0x4) /* bits 10x */
- comb = (1 << 0); /* SATA port 0, PATA port 1 */
- else if (tmp == 0x6) /* bits 11x */
- comb = (1 << 2); /* PATA port 0, SATA port 1 */
- else
- return; /* not in combined mode */
- } else {
- WARN_ON((ich != 6) && (ich != 7) && (ich != 8));
- tmp &= 0x3; /* interesting bits 1:0 */
- if (tmp & (1 << 0))
- comb = (1 << 2); /* PATA port 0, SATA port 1 */
- else if (tmp & (1 << 1))
- comb = (1 << 0); /* SATA port 0, PATA port 1 */
- else
- return; /* not in combined mode */
- }
-
- /*
- * Read programming interface register.
- * (Tells us if it's legacy or native mode)
- */
- pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
-
- /* if SATA port is in native mode, we're ok. */
- if (prog & comb)
- return;
-
- /* Don't reserve any so the IDE driver can get them (but only if
- * combined_mode=ide).
- */
- if (combined_mode == IDE)
- return;
-
- /* Grab them both for libata if combined_mode=libata. */
- if (combined_mode == LIBATA) {
- request_region(0x1f0, 8, "libata"); /* port 0 */
- request_region(0x170, 8, "libata"); /* port 1 */
- return;
- }
-
- /* SATA port is in legacy mode. Reserve port so that
- * IDE driver does not attempt to use it. If request_region
- * fails, it will be obvious at boot time, so we don't bother
- * checking return values.
- */
- if (comb == (1 << 0))
- request_region(0x1f0, 8, "libata"); /* port 0 */
- else
- request_region(0x170, 8, "libata"); /* port 1 */
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_intel_ide_combined );
-#endif /* CONFIG_SATA_INTEL_COMBINED */
-
-
int pcie_mch_quirk;
EXPORT_SYMBOL(pcie_mch_quirk);
@@ -1415,8 +1321,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quir
*/
static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
{
- disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
- PCI_CAP_ID_MSI);
+ pci_msi_off(dev);
+
dev->no_msi = 1;
printk(KERN_WARNING "PCI: PXH quirk detected, "
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-17 23:02:41 +0000