summaryrefslogtreecommitdiffstats
path: root/drivers/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/access.c18
-rw-r--r--drivers/pci/bus.c6
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c7
-rw-r--r--drivers/pci/hotplug/pcihp_slot.c45
-rw-r--r--drivers/pci/intel-iommu.c1
-rw-r--r--drivers/pci/iov.c1
-rw-r--r--drivers/pci/pci-sysfs.c62
-rw-r--r--drivers/pci/pci.c444
-rw-r--r--drivers/pci/pci.h40
-rw-r--r--drivers/pci/pcie/aer/aer_inject.c2
-rw-r--r--drivers/pci/pcie/aer/aerdrv.h9
-rw-r--r--drivers/pci/pcie/aspm.c21
-rw-r--r--drivers/pci/probe.c43
-rw-r--r--drivers/pci/quirks.c21
-rw-r--r--drivers/pci/remove.c2
-rw-r--r--drivers/pci/setup-bus.c125
16 files changed, 713 insertions, 134 deletions
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 531bc697d80..fdaa42aac7c 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -143,33 +143,41 @@ static noinline void pci_wait_ucfg(struct pci_dev *dev)
__remove_wait_queue(&pci_ucfg_wait, &wait);
}
+/* Returns 0 on success, negative values indicate error. */
#define PCI_USER_READ_CONFIG(size,type) \
int pci_user_read_config_##size \
(struct pci_dev *dev, int pos, type *val) \
{ \
int ret = 0; \
u32 data = -1; \
- if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
+ if (PCI_##size##_BAD) \
+ return -EINVAL; \
raw_spin_lock_irq(&pci_lock); \
if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
ret = dev->bus->ops->read(dev->bus, dev->devfn, \
pos, sizeof(type), &data); \
raw_spin_unlock_irq(&pci_lock); \
*val = (type)data; \
+ if (ret > 0) \
+ ret = -EINVAL; \
return ret; \
}
+/* Returns 0 on success, negative values indicate error. */
#define PCI_USER_WRITE_CONFIG(size,type) \
int pci_user_write_config_##size \
(struct pci_dev *dev, int pos, type val) \
{ \
int ret = -EIO; \
- if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
+ if (PCI_##size##_BAD) \
+ return -EINVAL; \
raw_spin_lock_irq(&pci_lock); \
if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
ret = dev->bus->ops->write(dev->bus, dev->devfn, \
pos, sizeof(type), val); \
raw_spin_unlock_irq(&pci_lock); \
+ if (ret > 0) \
+ ret = -EINVAL; \
return ret; \
}
@@ -197,6 +205,8 @@ struct pci_vpd_pci22 {
* This code has to spin since there is no other notification from the PCI
* hardware. Since the VPD is often implemented by serial attachment to an
* EEPROM, it may take many milliseconds to complete.
+ *
+ * Returns 0 on success, negative values indicate error.
*/
static int pci_vpd_pci22_wait(struct pci_dev *dev)
{
@@ -212,7 +222,7 @@ static int pci_vpd_pci22_wait(struct pci_dev *dev)
for (;;) {
ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR,
&status);
- if (ret)
+ if (ret < 0)
return ret;
if ((status & PCI_VPD_ADDR_F) == vpd->flag) {
@@ -324,6 +334,8 @@ static ssize_t pci_vpd_pci22_write(struct pci_dev *dev, loff_t pos, size_t count
vpd->busy = true;
vpd->flag = 0;
ret = pci_vpd_pci22_wait(dev);
+ if (ret < 0)
+ break;
pos += sizeof(u32);
}
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 69546e9213d..1e2ad92a475 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -163,12 +163,6 @@ int pci_bus_add_child(struct pci_bus *bus)
bus->is_added = 1;
- retval = device_create_file(&bus->dev, &dev_attr_cpuaffinity);
- if (retval)
- return retval;
-
- retval = device_create_file(&bus->dev, &dev_attr_cpulistaffinity);
-
/* Create legacy_io and legacy_mem files for this bus */
pci_create_legacy_files(bus);
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 2f67e9bc2f9..a70fa89f76f 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -827,6 +827,13 @@ static int __ref enable_device(struct acpiphp_slot *slot)
acpiphp_set_hpp_values(bus);
acpiphp_set_acpi_region(slot);
pci_enable_bridges(bus);
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ /* Assume that newly added devices are powered on already. */
+ if (!dev->is_added)
+ dev->current_state = PCI_D0;
+ }
+
pci_bus_add_devices(bus);
list_for_each_entry(func, &slot->funcs, sibling) {
diff --git a/drivers/pci/hotplug/pcihp_slot.c b/drivers/pci/hotplug/pcihp_slot.c
index 80b461c9855..749fdf07031 100644
--- a/drivers/pci/hotplug/pcihp_slot.c
+++ b/drivers/pci/hotplug/pcihp_slot.c
@@ -158,6 +158,47 @@ static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
*/
}
+/* Program PCIE MaxPayload setting on device: ensure parent maxpayload <= device */
+static int pci_set_payload(struct pci_dev *dev)
+{
+ int pos, ppos;
+ u16 pctl, psz;
+ u16 dctl, dsz, dcap, dmax;
+ struct pci_dev *parent;
+
+ parent = dev->bus->self;
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!pos)
+ return 0;
+
+ /* Read Device MaxPayload capability and setting */
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &dctl);
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCAP, &dcap);
+ dsz = (dctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5;
+ dmax = (dcap & PCI_EXP_DEVCAP_PAYLOAD);
+
+ /* Read Parent MaxPayload setting */
+ ppos = pci_find_capability(parent, PCI_CAP_ID_EXP);
+ if (!ppos)
+ return 0;
+ pci_read_config_word(parent, ppos + PCI_EXP_DEVCTL, &pctl);
+ psz = (pctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5;
+
+ /* If parent payload > device max payload -> error
+ * If parent payload > device payload -> set speed
+ * If parent payload <= device payload -> do nothing
+ */
+ if (psz > dmax)
+ return -1;
+ else if (psz > dsz) {
+ dev_info(&dev->dev, "Setting MaxPayload to %d\n", 128 << psz);
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
+ (dctl & ~PCI_EXP_DEVCTL_PAYLOAD) +
+ (psz << 5));
+ }
+ return 0;
+}
+
void pci_configure_slot(struct pci_dev *dev)
{
struct pci_dev *cdev;
@@ -169,6 +210,10 @@ void pci_configure_slot(struct pci_dev *dev)
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
return;
+ ret = pci_set_payload(dev);
+ if (ret)
+ dev_warn(&dev->dev, "could not set device max payload\n");
+
memset(&hpp, 0, sizeof(hpp));
ret = pci_get_hp_params(dev, &hpp);
if (ret)
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index d552d2c7784..6af6b628175 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -39,6 +39,7 @@
#include <linux/syscore_ops.h>
#include <linux/tboot.h>
#include <linux/dmi.h>
+#include <linux/pci-ats.h>
#include <asm/cacheflush.h>
#include <asm/iommu.h>
#include "pci.h"
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 553d8ee55c1..42fae477651 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -13,6 +13,7 @@
#include <linux/mutex.h>
#include <linux/string.h>
#include <linux/delay.h>
+#include <linux/pci-ats.h>
#include "pci.h"
#define VIRTFN_ID_LEN 16
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index f8deb3e380a..7bcf12adced 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -108,6 +108,40 @@ static ssize_t local_cpulist_show(struct device *dev,
return len;
}
+/*
+ * PCI Bus Class Devices
+ */
+static ssize_t pci_bus_show_cpuaffinity(struct device *dev,
+ int type,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ const struct cpumask *cpumask;
+
+ cpumask = cpumask_of_pcibus(to_pci_bus(dev));
+ ret = type ?
+ cpulist_scnprintf(buf, PAGE_SIZE-2, cpumask) :
+ cpumask_scnprintf(buf, PAGE_SIZE-2, cpumask);
+ buf[ret++] = '\n';
+ buf[ret] = '\0';
+ return ret;
+}
+
+static inline ssize_t pci_bus_show_cpumaskaffinity(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return pci_bus_show_cpuaffinity(dev, 0, attr, buf);
+}
+
+static inline ssize_t pci_bus_show_cpulistaffinity(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return pci_bus_show_cpuaffinity(dev, 1, attr, buf);
+}
+
/* show resources */
static ssize_t
resource_show(struct device * dev, struct device_attribute *attr, char * buf)
@@ -318,6 +352,25 @@ remove_store(struct device *dev, struct device_attribute *dummy,
count = ret;
return count;
}
+
+static ssize_t
+dev_bus_rescan_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long val;
+ struct pci_bus *bus = to_pci_bus(dev);
+
+ if (strict_strtoul(buf, 0, &val) < 0)
+ return -EINVAL;
+
+ if (val) {
+ mutex_lock(&pci_remove_rescan_mutex);
+ pci_rescan_bus(bus);
+ mutex_unlock(&pci_remove_rescan_mutex);
+ }
+ return count;
+}
+
#endif
struct device_attribute pci_dev_attrs[] = {
@@ -347,6 +400,15 @@ struct device_attribute pci_dev_attrs[] = {
__ATTR_NULL,
};
+struct device_attribute pcibus_dev_attrs[] = {
+#ifdef CONFIG_HOTPLUG
+ __ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_bus_rescan_store),
+#endif
+ __ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpumaskaffinity, NULL),
+ __ATTR(cpulistaffinity, S_IRUGO, pci_bus_show_cpulistaffinity, NULL),
+ __ATTR_NULL,
+};
+
static ssize_t
boot_vga_show(struct device *dev, struct device_attribute *attr, char *buf)
{
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 2472e7177b4..56098b3e17c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -830,7 +830,7 @@ static int pci_save_pcie_state(struct pci_dev *dev)
dev_err(&dev->dev, "buffer not found in %s\n", __func__);
return -ENOMEM;
}
- cap = (u16 *)&save_state->data[0];
+ cap = (u16 *)&save_state->cap.data[0];
pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
@@ -863,7 +863,7 @@ static void pci_restore_pcie_state(struct pci_dev *dev)
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (!save_state || pos <= 0)
return;
- cap = (u16 *)&save_state->data[0];
+ cap = (u16 *)&save_state->cap.data[0];
pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
@@ -899,7 +899,8 @@ static int pci_save_pcix_state(struct pci_dev *dev)
return -ENOMEM;
}
- pci_read_config_word(dev, pos + PCI_X_CMD, (u16 *)save_state->data);
+ pci_read_config_word(dev, pos + PCI_X_CMD,
+ (u16 *)save_state->cap.data);
return 0;
}
@@ -914,7 +915,7 @@ static void pci_restore_pcix_state(struct pci_dev *dev)
pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (!save_state || pos <= 0)
return;
- cap = (u16 *)&save_state->data[0];
+ cap = (u16 *)&save_state->cap.data[0];
pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
}
@@ -975,6 +976,104 @@ void pci_restore_state(struct pci_dev *dev)
dev->state_saved = false;
}
+struct pci_saved_state {
+ u32 config_space[16];
+ struct pci_cap_saved_data cap[0];
+};
+
+/**
+ * pci_store_saved_state - Allocate and return an opaque struct containing
+ * the device saved state.
+ * @dev: PCI device that we're dealing with
+ *
+ * Rerturn NULL if no state or error.
+ */
+struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev)
+{
+ struct pci_saved_state *state;
+ struct pci_cap_saved_state *tmp;
+ struct pci_cap_saved_data *cap;
+ struct hlist_node *pos;
+ size_t size;
+
+ if (!dev->state_saved)
+ return NULL;
+
+ size = sizeof(*state) + sizeof(struct pci_cap_saved_data);
+
+ hlist_for_each_entry(tmp, pos, &dev->saved_cap_space, next)
+ size += sizeof(struct pci_cap_saved_data) + tmp->cap.size;
+
+ state = kzalloc(size, GFP_KERNEL);
+ if (!state)
+ return NULL;
+
+ memcpy(state->config_space, dev->saved_config_space,
+ sizeof(state->config_space));
+
+ cap = state->cap;
+ hlist_for_each_entry(tmp, pos, &dev->saved_cap_space, next) {
+ size_t len = sizeof(struct pci_cap_saved_data) + tmp->cap.size;
+ memcpy(cap, &tmp->cap, len);
+ cap = (struct pci_cap_saved_data *)((u8 *)cap + len);
+ }
+ /* Empty cap_save terminates list */
+
+ return state;
+}
+EXPORT_SYMBOL_GPL(pci_store_saved_state);
+
+/**
+ * pci_load_saved_state - Reload the provided save state into struct pci_dev.
+ * @dev: PCI device that we're dealing with
+ * @state: Saved state returned from pci_store_saved_state()
+ */
+int pci_load_saved_state(struct pci_dev *dev, struct pci_saved_state *state)
+{
+ struct pci_cap_saved_data *cap;
+
+ dev->state_saved = false;
+
+ if (!state)
+ return 0;
+
+ memcpy(dev->saved_config_space, state->config_space,
+ sizeof(state->config_space));
+
+ cap = state->cap;
+ while (cap->size) {
+ struct pci_cap_saved_state *tmp;
+
+ tmp = pci_find_saved_cap(dev, cap->cap_nr);
+ if (!tmp || tmp->cap.size != cap->size)
+ return -EINVAL;
+
+ memcpy(tmp->cap.data, cap->data, tmp->cap.size);
+ cap = (struct pci_cap_saved_data *)((u8 *)cap +
+ sizeof(struct pci_cap_saved_data) + cap->size);
+ }
+
+ dev->state_saved = true;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(pci_load_saved_state);
+
+/**
+ * pci_load_and_free_saved_state - Reload the save state pointed to by state,
+ * and free the memory allocated for it.
+ * @dev: PCI device that we're dealing with
+ * @state: Pointer to saved state returned from pci_store_saved_state()
+ */
+int pci_load_and_free_saved_state(struct pci_dev *dev,
+ struct pci_saved_state **state)
+{
+ int ret = pci_load_saved_state(dev, *state);
+ kfree(*state);
+ *state = NULL;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pci_load_and_free_saved_state);
+
static int do_pci_enable_device(struct pci_dev *dev, int bars)
{
int err;
@@ -1771,7 +1870,8 @@ static int pci_add_cap_save_buffer(
if (!save_state)
return -ENOMEM;
- save_state->cap_nr = cap;
+ save_state->cap.cap_nr = cap;
+ save_state->cap.size = size;
pci_add_saved_cap(dev, save_state);
return 0;
@@ -1834,6 +1934,300 @@ void pci_enable_ari(struct pci_dev *dev)
bridge->ari_enabled = 1;
}
+/**
+ * pci_enable_ido - enable ID-based ordering on a device
+ * @dev: the PCI device
+ * @type: which types of IDO to enable
+ *
+ * Enable ID-based ordering on @dev. @type can contain the bits
+ * %PCI_EXP_IDO_REQUEST and/or %PCI_EXP_IDO_COMPLETION to indicate
+ * which types of transactions are allowed to be re-ordered.
+ */
+void pci_enable_ido(struct pci_dev *dev, unsigned long type)
+{
+ int pos;
+ u16 ctrl;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return;
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ if (type & PCI_EXP_IDO_REQUEST)
+ ctrl |= PCI_EXP_IDO_REQ_EN;
+ if (type & PCI_EXP_IDO_COMPLETION)
+ ctrl |= PCI_EXP_IDO_CMP_EN;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+}
+EXPORT_SYMBOL(pci_enable_ido);
+
+/**
+ * pci_disable_ido - disable ID-based ordering on a device
+ * @dev: the PCI device
+ * @type: which types of IDO to disable
+ */
+void pci_disable_ido(struct pci_dev *dev, unsigned long type)
+{
+ int pos;
+ u16 ctrl;
+
+ if (!pci_is_pcie(dev))
+ return;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return;
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ if (type & PCI_EXP_IDO_REQUEST)
+ ctrl &= ~PCI_EXP_IDO_REQ_EN;
+ if (type & PCI_EXP_IDO_COMPLETION)
+ ctrl &= ~PCI_EXP_IDO_CMP_EN;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+}
+EXPORT_SYMBOL(pci_disable_ido);
+
+/**
+ * pci_enable_obff - enable optimized buffer flush/fill
+ * @dev: PCI device
+ * @type: type of signaling to use
+ *
+ * Try to enable @type OBFF signaling on @dev. It will try using WAKE#
+ * signaling if possible, falling back to message signaling only if
+ * WAKE# isn't supported. @type should indicate whether the PCIe link
+ * be brought out of L0s or L1 to send the message. It should be either
+ * %PCI_EXP_OBFF_SIGNAL_ALWAYS or %PCI_OBFF_SIGNAL_L0.
+ *
+ * If your device can benefit from receiving all messages, even at the
+ * power cost of bringing the link back up from a low power state, use
+ * %PCI_EXP_OBFF_SIGNAL_ALWAYS. Otherwise, use %PCI_OBFF_SIGNAL_L0 (the
+ * preferred type).
+ *
+ * RETURNS:
+ * Zero on success, appropriate error number on failure.
+ */
+int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type)
+{
+ int pos;
+ u32 cap;
+ u16 ctrl;
+ int ret;
+
+ if (!pci_is_pcie(dev))
+ return -ENOTSUPP;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return -ENOTSUPP;
+
+ pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP2, &cap);
+ if (!(cap & PCI_EXP_OBFF_MASK))
+ return -ENOTSUPP; /* no OBFF support at all */
+
+ /* Make sure the topology supports OBFF as well */
+ if (dev->bus) {
+ ret = pci_enable_obff(dev->bus->self, type);
+ if (ret)
+ return ret;
+ }
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ if (cap & PCI_EXP_OBFF_WAKE)
+ ctrl |= PCI_EXP_OBFF_WAKE_EN;
+ else {
+ switch (type) {
+ case PCI_EXP_OBFF_SIGNAL_L0:
+ if (!(ctrl & PCI_EXP_OBFF_WAKE_EN))
+ ctrl |= PCI_EXP_OBFF_MSGA_EN;
+ break;
+ case PCI_EXP_OBFF_SIGNAL_ALWAYS:
+ ctrl &= ~PCI_EXP_OBFF_WAKE_EN;
+ ctrl |= PCI_EXP_OBFF_MSGB_EN;
+ break;
+ default:
+ WARN(1, "bad OBFF signal type\n");
+ return -ENOTSUPP;
+ }
+ }
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+
+ return 0;
+}
+EXPORT_SYMBOL(pci_enable_obff);
+
+/**
+ * pci_disable_obff - disable optimized buffer flush/fill
+ * @dev: PCI device
+ *
+ * Disable OBFF on @dev.
+ */
+void pci_disable_obff(struct pci_dev *dev)
+{
+ int pos;
+ u16 ctrl;
+
+ if (!pci_is_pcie(dev))
+ return;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return;
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ ctrl &= ~PCI_EXP_OBFF_WAKE_EN;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+}
+EXPORT_SYMBOL(pci_disable_obff);
+
+/**
+ * pci_ltr_supported - check whether a device supports LTR
+ * @dev: PCI device
+ *
+ * RETURNS:
+ * True if @dev supports latency tolerance reporting, false otherwise.
+ */
+bool pci_ltr_supported(struct pci_dev *dev)
+{
+ int pos;
+ u32 cap;
+
+ if (!pci_is_pcie(dev))
+ return false;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return false;
+
+ pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP2, &cap);
+
+ return cap & PCI_EXP_DEVCAP2_LTR;
+}
+EXPORT_SYMBOL(pci_ltr_supported);
+
+/**
+ * pci_enable_ltr - enable latency tolerance reporting
+ * @dev: PCI device
+ *
+ * Enable LTR on @dev if possible, which means enabling it first on
+ * upstream ports.
+ *
+ * RETURNS:
+ * Zero on success, errno on failure.
+ */
+int pci_enable_ltr(struct pci_dev *dev)
+{
+ int pos;
+ u16 ctrl;
+ int ret;
+
+ if (!pci_ltr_supported(dev))
+ return -ENOTSUPP;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return -ENOTSUPP;
+
+ /* Only primary function can enable/disable LTR */
+ if (PCI_FUNC(dev->devfn) != 0)
+ return -EINVAL;
+
+ /* Enable upstream ports first */
+ if (dev->bus) {
+ ret = pci_enable_ltr(dev->bus->self);
+ if (ret)
+ return ret;
+ }
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ ctrl |= PCI_EXP_LTR_EN;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+
+ return 0;
+}
+EXPORT_SYMBOL(pci_enable_ltr);
+
+/**
+ * pci_disable_ltr - disable latency tolerance reporting
+ * @dev: PCI device
+ */
+void pci_disable_ltr(struct pci_dev *dev)
+{
+ int pos;
+ u16 ctrl;
+
+ if (!pci_ltr_supported(dev))
+ return;
+
+ pos = pci_pcie_cap(dev);
+ if (!pos)
+ return;
+
+ /* Only primary function can enable/disable LTR */
+ if (PCI_FUNC(dev->devfn) != 0)
+ return;
+
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &ctrl);
+ ctrl &= ~PCI_EXP_LTR_EN;
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, ctrl);
+}
+EXPORT_SYMBOL(pci_disable_ltr);
+
+static int __pci_ltr_scale(int *val)
+{
+ int scale = 0;
+
+ while (*val > 1023) {
+ *val = (*val + 31) / 32;
+ scale++;
+ }
+ return scale;
+}
+
+/**
+ * pci_set_ltr - set LTR latency values
+ * @dev: PCI device
+ * @snoop_lat_ns: snoop latency in nanoseconds
+ * @nosnoop_lat_ns: nosnoop latency in nanoseconds
+ *
+ * Figure out the scale and set the LTR values accordingly.
+ */
+int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns)
+{
+ int pos, ret, snoop_scale, nosnoop_scale;
+ u16 val;
+
+ if (!pci_ltr_supported(dev))
+ return -ENOTSUPP;
+
+ snoop_scale = __pci_ltr_scale(&snoop_lat_ns);
+ nosnoop_scale = __pci_ltr_scale(&nosnoop_lat_ns);
+
+ if (snoop_lat_ns > PCI_LTR_VALUE_MASK ||
+ nosnoop_lat_ns > PCI_LTR_VALUE_MASK)
+ return -EINVAL;
+
+ if ((snoop_scale > (PCI_LTR_SCALE_MASK >> PCI_LTR_SCALE_SHIFT)) ||
+ (nosnoop_scale > (PCI_LTR_SCALE_MASK >> PCI_LTR_SCALE_SHIFT)))
+ return -EINVAL;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_LTR);
+ if (!pos)
+ return -ENOTSUPP;
+
+ val = (snoop_scale << PCI_LTR_SCALE_SHIFT) | snoop_lat_ns;
+ ret = pci_write_config_word(dev, pos + PCI_LTR_MAX_SNOOP_LAT, val);
+ if (ret != 4)
+ return -EIO;
+
+ val = (nosnoop_scale << PCI_LTR_SCALE_SHIFT) | nosnoop_lat_ns;
+ ret = pci_write_config_word(dev, pos + PCI_LTR_MAX_NOSNOOP_LAT, val);
+ if (ret != 4)
+ return -EIO;
+
+ return 0;
+}
+EXPORT_SYMBOL(pci_set_ltr);
+
static int pci_acs_enable;
/**
@@ -2479,6 +2873,21 @@ clear:
return 0;
}
+/**
+ * pci_pm_reset - Put device into PCI_D3 and back into PCI_D0.
+ * @dev: Device to reset.
+ * @probe: If set, only check if the device can be reset this way.
+ *
+ * If @dev supports native PCI PM and its PCI_PM_CTRL_NO_SOFT_RESET flag is
+ * unset, it will be reinitialized internally when going from PCI_D3hot to
+ * PCI_D0. If that's the case and the device is not in a low-power state
+ * already, force it into PCI_D3hot and back to PCI_D0, causing it to be reset.
+ *
+ * NOTE: This causes the caller to sleep for twice the device power transition
+ * cooldown period, which for the D0->D3hot and D3hot->D0 transitions is 10 ms
+ * by devault (i.e. unless the @dev's d3_delay field has a different value).
+ * Moreover, only devices in D0 can be reset by this function.
+ */
static int pci_pm_reset(struct pci_dev *dev, int probe)
{
u16 csr;
@@ -2875,31 +3284,34 @@ static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode,
* @dev: the PCI device
* @decode: true = enable decoding, false = disable decoding
* @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
- * @change_bridge: traverse ancestors and change bridges
+ * @change_bridge_flags: traverse ancestors and change bridges
+ * CHANGE_BRIDGE_ONLY / CHANGE_BRIDGE
*/
int pci_set_vga_state(struct pci_dev *dev, bool decode,
- unsigned int command_bits, bool change_bridge)
+ unsigned int command_bits, u32 flags)
{
struct pci_bus *bus;
struct pci_dev *bridge;
u16 cmd;
int rc;
- WARN_ON(command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY));
+ WARN_ON((flags & PCI_VGA_STATE_CHANGE_DECODES) & (command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY)));
/* ARCH specific VGA enables */
- rc = pci_set_vga_state_arch(dev, decode, command_bits, change_bridge);
+ rc = pci_set_vga_state_arch(dev, decode, command_bits, flags);
if (rc)
return rc;
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- if (decode == true)
- cmd |= command_bits;
- else
- cmd &= ~command_bits;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
+ if (flags & PCI_VGA_STATE_CHANGE_DECODES) {
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ if (decode == true)
+ cmd |= command_bits;
+ else
+ cmd &= ~command_bits;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
- if (change_bridge == false)
+ if (!(flags & PCI_VGA_STATE_CHANGE_BRIDGE))
return 0;
bus = dev->bus;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a6ec200fe5e..731e20265ac 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -156,8 +156,7 @@ static inline int pci_no_d1d2(struct pci_dev *dev)
}
extern struct device_attribute pci_dev_attrs[];
-extern struct device_attribute dev_attr_cpuaffinity;
-extern struct device_attribute dev_attr_cpulistaffinity;
+extern struct device_attribute pcibus_dev_attrs[];
#ifdef CONFIG_HOTPLUG
extern struct bus_attribute pci_bus_attrs[];
#else
@@ -250,15 +249,6 @@ struct pci_sriov {
u8 __iomem *mstate; /* VF Migration State Array */
};
-/* Address Translation Service */
-struct pci_ats {
- int pos; /* capability position */
- int stu; /* Smallest Translation Unit */
- int qdep; /* Invalidate Queue Depth */
- int ref_cnt; /* Physical Function reference count */
- unsigned int is_enabled:1; /* Enable bit is set */
-};
-
#ifdef CONFIG_PCI_IOV
extern int pci_iov_init(struct pci_dev *dev);
extern void pci_iov_release(struct pci_dev *dev);
@@ -269,19 +259,6 @@ extern resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev,
extern void pci_restore_iov_state(struct pci_dev *dev);
extern int pci_iov_bus_range(struct pci_bus *bus);
-extern int pci_enable_ats(struct pci_dev *dev, int ps);
-extern void pci_disable_ats(struct pci_dev *dev);
-extern int pci_ats_queue_depth(struct pci_dev *dev);
-/**
- * pci_ats_enabled - query the ATS status
- * @dev: the PCI device
- *
- * Returns 1 if ATS capability is enabled, or 0 if not.
- */
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
- return dev->ats && dev->ats->is_enabled;
-}
#else
static inline int pci_iov_init(struct pci_dev *dev)
{
@@ -304,21 +281,6 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
return 0;
}
-static inline int pci_enable_ats(struct pci_dev *dev, int ps)
-{
- return -ENODEV;
-}
-static inline void pci_disable_ats(struct pci_dev *dev)
-{
-}
-static inline int pci_ats_queue_depth(struct pci_dev *dev)
-{
- return -ENODEV;
-}
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
- return 0;
-}
#endif /* CONFIG_PCI_IOV */
static inline resource_size_t pci_resource_alignment(struct pci_dev *dev,
diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
index f62079ff06d..95489cd9a55 100644
--- a/drivers/pci/pcie/aer/aer_inject.c
+++ b/drivers/pci/pcie/aer/aer_inject.c
@@ -326,7 +326,7 @@ static int aer_inject(struct aer_error_inj *einj)
unsigned long flags;
unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
int pos_cap_err, rp_pos_cap_err;
- u32 sever, cor_mask, uncor_mask, cor_mask_orig, uncor_mask_orig;
+ u32 sever, cor_mask, uncor_mask, cor_mask_orig = 0, uncor_mask_orig = 0;
int ret = 0;
dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn);
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index 3eb77080366..94a7598eb26 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -114,15 +114,6 @@ extern void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
extern void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info);
extern irqreturn_t aer_irq(int irq, void *context);
-#ifdef CONFIG_ACPI
-extern int aer_osc_setup(struct pcie_device *pciedev);
-#else
-static inline int aer_osc_setup(struct pcie_device *pciedev)
-{
- return 0;
-}
-#endif
-
#ifdef CONFIG_ACPI_APEI
extern int pcie_aer_get_firmware_first(struct pci_dev *pci_dev);
#else
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index eee09f756ec..6892601fc76 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -608,7 +608,7 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
* the BIOS's expectation, we'll do so once pci_enable_device() is
* called.
*/
- if (aspm_policy != POLICY_POWERSAVE) {
+ if (aspm_policy != POLICY_POWERSAVE || aspm_clear_state) {
pcie_config_aspm_path(link);
pcie_set_clkpm(link, policy_to_clkpm_state(link));
}
@@ -734,7 +734,7 @@ void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
* pci_disable_link_state - disable pci device's link state, so the link will
* never enter specific states
*/
-void pci_disable_link_state(struct pci_dev *pdev, int state)
+static void __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
{
struct pci_dev *parent = pdev->bus->self;
struct pcie_link_state *link;
@@ -747,7 +747,8 @@ void pci_disable_link_state(struct pci_dev *pdev, int state)
if (!parent || !parent->link_state)
return;
- down_read(&pci_bus_sem);
+ if (sem)
+ down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
link = parent->link_state;
if (state & PCIE_LINK_STATE_L0S)
@@ -761,7 +762,19 @@ void pci_disable_link_state(struct pci_dev *pdev, int state)
pcie_set_clkpm(link, 0);
}
mutex_unlock(&aspm_lock);
- up_read(&pci_bus_sem);
+ if (sem)
+ up_read(&pci_bus_sem);
+}
+
+void pci_disable_link_state_locked(struct pci_dev *pdev, int state)
+{
+ __pci_disable_link_state(pdev, state, false);
+}
+EXPORT_SYMBOL(pci_disable_link_state_locked);
+
+void pci_disable_link_state(struct pci_dev *pdev, int state)
+{
+ __pci_disable_link_state(pdev, state, true);
}
EXPORT_SYMBOL(pci_disable_link_state);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 44cbbbaa499..48849ffdd67 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -43,43 +43,6 @@ int no_pci_devices(void)
EXPORT_SYMBOL(no_pci_devices);
/*
- * PCI Bus Class Devices
- */
-static ssize_t pci_bus_show_cpuaffinity(struct device *dev,
- int type,
- struct device_attribute *attr,
- char *buf)
-{
- int ret;
- const struct cpumask *cpumask;
-
- cpumask = cpumask_of_pcibus(to_pci_bus(dev));
- ret = type?
- cpulist_scnprintf(buf, PAGE_SIZE-2, cpumask) :
- cpumask_scnprintf(buf, PAGE_SIZE-2, cpumask);
- buf[ret++] = '\n';
- buf[ret] = '\0';
- return ret;
-}
-
-static ssize_t inline pci_bus_show_cpumaskaffinity(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return pci_bus_show_cpuaffinity(dev, 0, attr, buf);
-}
-
-static ssize_t inline pci_bus_show_cpulistaffinity(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return pci_bus_show_cpuaffinity(dev, 1, attr, buf);
-}
-
-DEVICE_ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpumaskaffinity, NULL);
-DEVICE_ATTR(cpulistaffinity, S_IRUGO, pci_bus_show_cpulistaffinity, NULL);
-
-/*
* PCI Bus Class
*/
static void release_pcibus_dev(struct device *dev)
@@ -95,6 +58,7 @@ static void release_pcibus_dev(struct device *dev)
static struct class pcibus_class = {
.name = "pci_bus",
.dev_release = &release_pcibus_dev,
+ .dev_attrs = pcibus_dev_attrs,
};
static int __init pcibus_class_init(void)
@@ -1455,9 +1419,6 @@ struct pci_bus * pci_create_bus(struct device *parent,
error = device_register(&b->dev);
if (error)
goto class_dev_reg_err;
- error = device_create_file(&b->dev, &dev_attr_cpuaffinity);
- if (error)
- goto dev_create_file_err;
/* Create legacy_io and legacy_mem files for this bus */
pci_create_legacy_files(b);
@@ -1468,8 +1429,6 @@ struct pci_bus * pci_create_bus(struct device *parent,
return b;
-dev_create_file_err:
- device_unregister(&b->dev);
class_dev_reg_err:
device_unregister(dev);
dev_reg_err:
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 5129ed6d8fa..e8a140669f9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -606,7 +606,7 @@ static void __devinit ich6_lpc_acpi_gpio(struct pci_dev *dev)
}
pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable);
- if (enable & ICH4_GPIO_EN) {
+ if (enable & ICH6_GPIO_EN) {
pci_read_config_dword(dev, ICH6_GPIOBASE, &region);
region &= PCI_BASE_ADDRESS_IO_MASK;
if (region >= PCIBIOS_MIN_IO)
@@ -681,7 +681,7 @@ static void __devinit ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg,
/* ICH7-10 has the same common LPC generic IO decode registers */
static void __devinit quirk_ich7_lpc(struct pci_dev *dev)
{
- /* We share the common ACPI/DPIO decode with ICH6 */
+ /* We share the common ACPI/GPIO decode with ICH6 */
ich6_lpc_acpi_gpio(dev);
/* And have 4 ICH7+ generic decodes */
@@ -2349,8 +2349,11 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE,
*/
static void __devinit nvenet_msi_disable(struct pci_dev *dev)
{
- if (dmi_name_in_vendors("P5N32-SLI PREMIUM") ||
- dmi_name_in_vendors("P5N32-E SLI")) {
+ const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+ if (board_name &&
+ (strstr(board_name, "P5N32-SLI PREMIUM") ||
+ strstr(board_name, "P5N32-E SLI"))) {
dev_info(&dev->dev,
"Disabling msi for MCP55 NIC on P5N32-SLI\n");
dev->no_msi = 1;
@@ -2784,6 +2787,16 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
#endif
+static void __devinit fixup_ti816x_class(struct pci_dev* dev)
+{
+ /* TI 816x devices do not have class code set when in PCIe boot mode */
+ if (dev->class == PCI_CLASS_NOT_DEFINED) {
+ dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n");
+ dev->class = PCI_CLASS_MULTIMEDIA_VIDEO;
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_TI, 0xb800, fixup_ti816x_class);
+
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 176615e7231..7f87beed35a 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -73,8 +73,6 @@ void pci_remove_bus(struct pci_bus *pci_bus)
return;
pci_remove_legacy_files(pci_bus);
- device_remove_file(&pci_bus->dev, &dev_attr_cpuaffinity);
- device_remove_file(&pci_bus->dev, &dev_attr_cpulistaffinity);
device_unregister(&pci_bus->dev);
}
EXPORT_SYMBOL(pci_remove_bus);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index a806cb321d2..1e9e5a5b8c8 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -991,30 +991,139 @@ static void pci_bus_dump_resources(struct pci_bus *bus)
}
}
+static int __init pci_bus_get_depth(struct pci_bus *bus)
+{
+ int depth = 0;
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ int ret;
+ struct pci_bus *b = dev->subordinate;
+ if (!b)
+ continue;
+
+ ret = pci_bus_get_depth(b);
+ if (ret + 1 > depth)
+ depth = ret + 1;
+ }
+
+ return depth;
+}
+static int __init pci_get_max_depth(void)
+{
+ int depth = 0;
+ struct pci_bus *bus;
+
+ list_for_each_entry(bus, &pci_root_buses, node) {
+ int ret;
+
+ ret = pci_bus_get_depth(bus);
+ if (ret > depth)
+ depth = ret;
+ }
+
+ return depth;
+}
+
+/*
+ * first try will not touch pci bridge res
+ * second and later try will clear small leaf bridge res
+ * will stop till to the max deepth if can not find good one
+ */
void __init
pci_assign_unassigned_resources(void)
{
struct pci_bus *bus;
struct resource_list_x add_list; /* list of resources that
want additional resources */
+ int tried_times = 0;
+ enum release_type rel_type = leaf_only;
+ struct resource_list_x head, *list;
+ unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM |
+ IORESOURCE_PREFETCH;
+ unsigned long failed_type;
+ int max_depth = pci_get_max_depth();
+ int pci_try_num;
+
+
+ head.next = NULL;
add_list.next = NULL;
+
+ pci_try_num = max_depth + 1;
+ printk(KERN_DEBUG "PCI: max bus depth: %d pci_try_num: %d\n",
+ max_depth, pci_try_num);
+
+again:
/* Depth first, calculate sizes and alignments of all
subordinate buses. */
- list_for_each_entry(bus, &pci_root_buses, node) {
+ list_for_each_entry(bus, &pci_root_buses, node)
__pci_bus_size_bridges(bus, &add_list);
- }
/* Depth last, allocate resources and update the hardware. */
- list_for_each_entry(bus, &pci_root_buses, node) {
- __pci_bus_assign_resources(bus, &add_list, NULL);
- pci_enable_bridges(bus);
- }
+ list_for_each_entry(bus, &pci_root_buses, node)
+ __pci_bus_assign_resources(bus, &add_list, &head);
BUG_ON(add_list.next);
+ tried_times++;
+
+ /* any device complain? */
+ if (!head.next)
+ goto enable_and_dump;
+ failed_type = 0;
+ for (list = head.next; list;) {
+ failed_type |= list->flags;
+ list = list->next;
+ }
+ /*
+ * io port are tight, don't try extra
+ * or if reach the limit, don't want to try more
+ */
+ failed_type &= type_mask;
+ if ((failed_type == IORESOURCE_IO) || (tried_times >= pci_try_num)) {
+ free_list(resource_list_x, &head);
+ goto enable_and_dump;
+ }
+
+ printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
+ tried_times + 1);
+
+ /* third times and later will not check if it is leaf */
+ if ((tried_times + 1) > 2)
+ rel_type = whole_subtree;
+
+ /*
+ * Try to release leaf bridge's resources that doesn't fit resource of
+ * child device under that bridge
+ */
+ for (list = head.next; list;) {
+ bus = list->dev->bus;
+ pci_bus_release_bridge_resources(bus, list->flags & type_mask,
+ rel_type);
+ list = list->next;
+ }
+ /* restore size and flags */
+ for (list = head.next; list;) {
+ struct resource *res = list->res;
+
+ res->start = list->start;
+ res->end = list->end;
+ res->flags = list->flags;
+ if (list->dev->subordinate)
+ res->flags = 0;
+
+ list = list->next;
+ }
+ free_list(resource_list_x, &head);
+
+ goto again;
+
+enable_and_dump:
+ /* Depth last, update the hardware. */
+ list_for_each_entry(bus, &pci_root_buses, node)
+ pci_enable_bridges(bus);
/* dump the resource on buses */
- list_for_each_entry(bus, &pci_root_buses, node) {
+ list_for_each_entry(bus, &pci_root_buses, node)
pci_bus_dump_resources(bus);
- }
}
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 12:46:05 +0000