diff options
Diffstat (limited to 'drivers/pci')
30 files changed, 941 insertions, 408 deletions
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 8d688b260e2..0c3efcffa83 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -4,7 +4,7 @@ obj-y += access.o bus.o probe.o host-bridge.o remove.o pci.o \ pci-driver.o search.o pci-sysfs.o rom.o setup-res.o \ - irq.o vpd.o + irq.o vpd.o setup-bus.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_SYSFS) += slot.o @@ -15,8 +15,6 @@ obj-$(CONFIG_PCIEPORTBUS) += pcie/ obj-$(CONFIG_PCI_IOAPIC) += ioapic.o -obj-$(CONFIG_HOTPLUG) += hotplug.o - # Build the PCI Hotplug drivers if we were asked to obj-$(CONFIG_HOTPLUG_PCI) += hotplug/ ifdef CONFIG_HOTPLUG_PCI @@ -60,9 +58,6 @@ obj-$(CONFIG_ACPI) += pci-acpi.o # SMBIOS provided firmware instance and labels obj-$(CONFIG_PCI_LABEL) += pci-label.o -# Cardbus & CompactPCI use setup-bus -obj-$(CONFIG_HOTPLUG) += setup-bus.o - obj-$(CONFIG_PCI_SYSCALL) += syscall.o obj-$(CONFIG_PCI_STUB) += pci-stub.o diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 6241fd05bd4..ad6a8b63569 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -170,6 +170,11 @@ int pci_bus_add_device(struct pci_dev *dev) int retval; pci_fixup_device(pci_fixup_final, dev); + + retval = pcibios_add_device(dev); + if (retval) + return retval; + retval = device_add(&dev->dev); if (retval) return retval; @@ -320,10 +325,7 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), } else next = dev->bus_list.next; - /* Run device routines with the device locked */ - device_lock(&dev->dev); retval = cb(dev, userdata); - device_unlock(&dev->dev); if (retval) break; } diff --git a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c deleted file mode 100644 index 2b5352a7dff..00000000000 --- a/drivers/pci/hotplug.c +++ /dev/null @@ -1,37 +0,0 @@ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/module.h> -#include "pci.h" - -int pci_uevent(struct device *dev, struct kobj_uevent_env *env) -{ - struct pci_dev *pdev; - - if (!dev) - return -ENODEV; - - pdev = to_pci_dev(dev); - if (!pdev) - return -ENODEV; - - if (add_uevent_var(env, "PCI_CLASS=%04X", pdev->class)) - return -ENOMEM; - - if (add_uevent_var(env, "PCI_ID=%04X:%04X", pdev->vendor, pdev->device)) - return -ENOMEM; - - if (add_uevent_var(env, "PCI_SUBSYS_ID=%04X:%04X", pdev->subsystem_vendor, - pdev->subsystem_device)) - return -ENOMEM; - - if (add_uevent_var(env, "PCI_SLOT_NAME=%s", pci_name(pdev))) - return -ENOMEM; - - if (add_uevent_var(env, "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x", - pdev->vendor, pdev->device, - pdev->subsystem_vendor, pdev->subsystem_device, - (u8)(pdev->class >> 16), (u8)(pdev->class >> 8), - (u8)(pdev->class))) - return -ENOMEM; - return 0; -} diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index b0e46dede1a..13e9e63a726 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -151,4 +151,15 @@ config HOTPLUG_PCI_SGI When in doubt, say N. +config HOTPLUG_PCI_S390 + tristate "System z PCI Hotplug Support" + depends on S390 && 64BIT + help + Say Y here if you want to use the System z PCI Hotplug + driver for PCI devices. Without this driver it is not + possible to access stand-by PCI functions nor to deconfigure + PCI functions. + + When in doubt, say Y. + endif # HOTPLUG_PCI diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile index c459cd4e39c..47ec8c80e16 100644 --- a/drivers/pci/hotplug/Makefile +++ b/drivers/pci/hotplug/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_HOTPLUG_PCI_RPA) += rpaphp.o obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR) += rpadlpar_io.o obj-$(CONFIG_HOTPLUG_PCI_SGI) += sgi_hotplug.o obj-$(CONFIG_HOTPLUG_PCI_ACPI) += acpiphp.o +obj-$(CONFIG_HOTPLUG_PCI_S390) += s390_pci_hpc.o # acpiphp_ibm extends acpiphp, so should be linked afterwards. diff --git a/drivers/pci/hotplug/cpcihp_zt5550.c b/drivers/pci/hotplug/cpcihp_zt5550.c index 6bf8d2ab164..449b4bbc830 100644 --- a/drivers/pci/hotplug/cpcihp_zt5550.c +++ b/drivers/pci/hotplug/cpcihp_zt5550.c @@ -271,7 +271,7 @@ init_hc_error: } -static void __devexit zt5550_hc_remove_one(struct pci_dev *pdev) +static void zt5550_hc_remove_one(struct pci_dev *pdev) { cpci_hp_stop(); cpci_hp_unregister_bus(bus0); @@ -290,7 +290,7 @@ static struct pci_driver zt5550_hc_driver = { .name = "zt5550_hc", .id_table = zt5550_hc_pci_tbl, .probe = zt5550_hc_init_one, - .remove = __devexit_p(zt5550_hc_remove_one), + .remove = zt5550_hc_remove_one, }; static int __init zt5550_init(void) diff --git a/drivers/pci/hotplug/s390_pci_hpc.c b/drivers/pci/hotplug/s390_pci_hpc.c new file mode 100644 index 00000000000..dee68e0698e --- /dev/null +++ b/drivers/pci/hotplug/s390_pci_hpc.c @@ -0,0 +1,252 @@ +/* + * PCI Hot Plug Controller Driver for System z + * + * Copyright 2012 IBM Corp. + * + * Author(s): + * Jan Glauber <jang@linux.vnet.ibm.com> + */ + +#define COMPONENT "zPCI hpc" +#define pr_fmt(fmt) COMPONENT ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/pci_hotplug.h> +#include <linux/init.h> +#include <asm/sclp.h> + +#define SLOT_NAME_SIZE 10 +static LIST_HEAD(s390_hotplug_slot_list); + +MODULE_AUTHOR("Jan Glauber <jang@linux.vnet.ibm.com"); +MODULE_DESCRIPTION("Hot Plug PCI Controller for System z"); +MODULE_LICENSE("GPL"); + +static int zpci_fn_configured(enum zpci_state state) +{ + return state == ZPCI_FN_STATE_CONFIGURED || + state == ZPCI_FN_STATE_ONLINE; +} + +/* + * struct slot - slot information for each *physical* slot + */ +struct slot { + struct list_head slot_list; + struct hotplug_slot *hotplug_slot; + struct zpci_dev *zdev; +}; + +static int enable_slot(struct hotplug_slot *hotplug_slot) +{ + struct slot *slot = hotplug_slot->private; + int rc; + + if (slot->zdev->state != ZPCI_FN_STATE_STANDBY) + return -EIO; + + rc = sclp_pci_configure(slot->zdev->fid); + if (!rc) { + slot->zdev->state = ZPCI_FN_STATE_CONFIGURED; + /* automatically scan the device after is was configured */ + zpci_enable_device(slot->zdev); + zpci_scan_device(slot->zdev); + } + return rc; +} + +static int disable_slot(struct hotplug_slot *hotplug_slot) +{ + struct slot *slot = hotplug_slot->private; + int rc; + + if (!zpci_fn_configured(slot->zdev->state)) + return -EIO; + + /* TODO: we rely on the user to unbind/remove the device, is that plausible + * or do we need to trigger that here? + */ + rc = sclp_pci_deconfigure(slot->zdev->fid); + if (!rc) { + /* Fixme: better call List-PCI to find the disabled FH + for the FID since the FH should be opaque... */ + slot->zdev->fh &= 0x7fffffff; + slot->zdev->state = ZPCI_FN_STATE_STANDBY; + } + return rc; +} + +static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) +{ + struct slot *slot = hotplug_slot->private; + + switch (slot->zdev->state) { + case ZPCI_FN_STATE_STANDBY: + *value = 0; + break; + default: + *value = 1; + break; + } + return 0; +} + +static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) +{ + /* if the slot exits it always contains a function */ + *value = 1; + return 0; +} + +static void release_slot(struct hotplug_slot *hotplug_slot) +{ + struct slot *slot = hotplug_slot->private; + + pr_debug("%s - physical_slot = %s\n", __func__, hotplug_slot_name(hotplug_slot)); + kfree(slot->hotplug_slot->info); + kfree(slot->hotplug_slot); + kfree(slot); +} + +static struct hotplug_slot_ops s390_hotplug_slot_ops = { + .enable_slot = enable_slot, + .disable_slot = disable_slot, + .get_power_status = get_power_status, + .get_adapter_status = get_adapter_status, +}; + +static int init_pci_slot(struct zpci_dev *zdev) +{ + struct hotplug_slot *hotplug_slot; + struct hotplug_slot_info *info; + char name[SLOT_NAME_SIZE]; + struct slot *slot; + int rc; + + if (!zdev) + return 0; + + slot = kzalloc(sizeof(*slot), GFP_KERNEL); + if (!slot) + goto error; + + hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL); + if (!hotplug_slot) + goto error_hp; + hotplug_slot->private = slot; + + slot->hotplug_slot = hotplug_slot; + slot->zdev = zdev; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + goto error_info; + hotplug_slot->info = info; + + hotplug_slot->ops = &s390_hotplug_slot_ops; + hotplug_slot->release = &release_slot; + + get_power_status(hotplug_slot, &info->power_status); + get_adapter_status(hotplug_slot, &info->adapter_status); + + snprintf(name, SLOT_NAME_SIZE, "%08x", zdev->fid); + rc = pci_hp_register(slot->hotplug_slot, zdev->bus, + ZPCI_DEVFN, name); + if (rc) { + pr_err("pci_hp_register failed with error %d\n", rc); + goto error_reg; + } + list_add(&slot->slot_list, &s390_hotplug_slot_list); + return 0; + +error_reg: + kfree(info); +error_info: + kfree(hotplug_slot); +error_hp: + kfree(slot); +error: + return -ENOMEM; +} + +static int __init init_pci_slots(void) +{ + struct zpci_dev *zdev; + int device = 0; + + /* + * Create a structure for each slot, and register that slot + * with the pci_hotplug subsystem. + */ + mutex_lock(&zpci_list_lock); + list_for_each_entry(zdev, &zpci_list, entry) { + init_pci_slot(zdev); + device++; + } + + mutex_unlock(&zpci_list_lock); + return (device) ? 0 : -ENODEV; +} + +static void exit_pci_slot(struct zpci_dev *zdev) +{ + struct list_head *tmp, *n; + struct slot *slot; + + list_for_each_safe(tmp, n, &s390_hotplug_slot_list) { + slot = list_entry(tmp, struct slot, slot_list); + if (slot->zdev != zdev) + continue; + list_del(&slot->slot_list); + pci_hp_deregister(slot->hotplug_slot); + } +} + +static void __exit exit_pci_slots(void) +{ + struct list_head *tmp, *n; + struct slot *slot; + + /* + * Unregister all of our slots with the pci_hotplug subsystem. + * Memory will be freed in release_slot() callback after slot's + * lifespan is finished. + */ + list_for_each_safe(tmp, n, &s390_hotplug_slot_list) { + slot = list_entry(tmp, struct slot, slot_list); + list_del(&slot->slot_list); + pci_hp_deregister(slot->hotplug_slot); + } +} + +static int __init pci_hotplug_s390_init(void) +{ + /* + * Do specific initialization stuff for your driver here + * like initializing your controller hardware (if any) and + * determining the number of slots you have in the system + * right now. + */ + + if (!pci_probe) + return -EOPNOTSUPP; + + /* register callbacks for slot handling from arch code */ + mutex_lock(&zpci_list_lock); + hotplug_ops.create_slot = init_pci_slot; + hotplug_ops.remove_slot = exit_pci_slot; + mutex_unlock(&zpci_list_lock); + pr_info("registered hotplug slot callbacks\n"); + return init_pci_slots(); +} + +static void __exit pci_hotplug_s390_exit(void) +{ + exit_pci_slots(); +} + +module_init(pci_hotplug_s390_init); +module_exit(pci_hotplug_s390_exit); diff --git a/drivers/pci/ioapic.c b/drivers/pci/ioapic.c index 205af8dc83c..3c6bbdd059a 100644 --- a/drivers/pci/ioapic.c +++ b/drivers/pci/ioapic.c @@ -27,7 +27,7 @@ struct ioapic { u32 gsi_base; }; -static int __devinit ioapic_probe(struct pci_dev *dev, const struct pci_device_id *ent) +static int ioapic_probe(struct pci_dev *dev, const struct pci_device_id *ent) { acpi_handle handle; acpi_status status; @@ -88,7 +88,7 @@ exit_free: return -ENODEV; } -static void __devexit ioapic_remove(struct pci_dev *dev) +static void ioapic_remove(struct pci_dev *dev) { struct ioapic *ioapic = pci_get_drvdata(dev); @@ -110,7 +110,7 @@ static struct pci_driver ioapic_driver = { .name = "ioapic", .id_table = ioapic_devices, .probe = ioapic_probe, - .remove = __devexit_p(ioapic_remove), + .remove = ioapic_remove, }; static int __init ioapic_init(void) @@ -125,3 +125,5 @@ static void __exit ioapic_exit(void) module_init(ioapic_init); module_exit(ioapic_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index aeccc911abb..bafd2bbcaf6 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -106,7 +106,7 @@ static int virtfn_add(struct pci_dev *dev, int id, int reset) virtfn->resource[i].name = pci_name(virtfn); virtfn->resource[i].flags = res->flags; size = resource_size(res); - do_div(size, iov->total); + do_div(size, iov->total_VFs); virtfn->resource[i].start = res->start + size * id; virtfn->resource[i].end = virtfn->resource[i].start + size - 1; rc = request_resource(res, &virtfn->resource[i]); @@ -194,7 +194,7 @@ static int sriov_migration(struct pci_dev *dev) u16 status; struct pci_sriov *iov = dev->sriov; - if (!iov->nr_virtfn) + if (!iov->num_VFs) return 0; if (!(iov->cap & PCI_SRIOV_CAP_VFM)) @@ -216,7 +216,7 @@ static void sriov_migration_task(struct work_struct *work) u16 status; struct pci_sriov *iov = container_of(work, struct pci_sriov, mtask); - for (i = iov->initial; i < iov->nr_virtfn; i++) { + for (i = iov->initial_VFs; i < iov->num_VFs; i++) { state = readb(iov->mstate + i); if (state == PCI_SRIOV_VFM_MI) { writeb(PCI_SRIOV_VFM_AV, iov->mstate + i); @@ -244,7 +244,7 @@ static int sriov_enable_migration(struct pci_dev *dev, int nr_virtfn) resource_size_t pa; struct pci_sriov *iov = dev->sriov; - if (nr_virtfn <= iov->initial) + if (nr_virtfn <= iov->initial_VFs) return 0; pci_read_config_dword(dev, iov->pos + PCI_SRIOV_VFM, &table); @@ -294,15 +294,15 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) if (!nr_virtfn) return 0; - if (iov->nr_virtfn) + if (iov->num_VFs) return -EINVAL; pci_read_config_word(dev, iov->pos + PCI_SRIOV_INITIAL_VF, &initial); - if (initial > iov->total || - (!(iov->cap & PCI_SRIOV_CAP_VFM) && (initial != iov->total))) + if (initial > iov->total_VFs || + (!(iov->cap & PCI_SRIOV_CAP_VFM) && (initial != iov->total_VFs))) return -EIO; - if (nr_virtfn < 0 || nr_virtfn > iov->total || + if (nr_virtfn < 0 || nr_virtfn > iov->total_VFs || (!(iov->cap & PCI_SRIOV_CAP_VFM) && (nr_virtfn > initial))) return -EINVAL; @@ -359,7 +359,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) msleep(100); pci_cfg_access_unlock(dev); - iov->initial = initial; + iov->initial_VFs = initial; if (nr_virtfn < initial) initial = nr_virtfn; @@ -376,7 +376,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) } kobject_uevent(&dev->dev.kobj, KOBJ_CHANGE); - iov->nr_virtfn = nr_virtfn; + iov->num_VFs = nr_virtfn; return 0; @@ -401,13 +401,13 @@ static void sriov_disable(struct pci_dev *dev) int i; struct pci_sriov *iov = dev->sriov; - if (!iov->nr_virtfn) + if (!iov->num_VFs) return; if (iov->cap & PCI_SRIOV_CAP_VFM) sriov_disable_migration(dev); - for (i = 0; i < iov->nr_virtfn; i++) + for (i = 0; i < iov->num_VFs; i++) virtfn_remove(dev, i, 0); iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); @@ -419,7 +419,7 @@ static void sriov_disable(struct pci_dev *dev) if (iov->link != dev->devfn) sysfs_remove_link(&dev->dev.kobj, "dep_link"); - iov->nr_virtfn = 0; + iov->num_VFs = 0; } static int sriov_init(struct pci_dev *dev, int pos) @@ -496,7 +496,7 @@ found: iov->pos = pos; iov->nres = nres; iov->ctrl = ctrl; - iov->total = total; + iov->total_VFs = total; iov->offset = offset; iov->stride = stride; iov->pgsz = pgsz; @@ -529,7 +529,7 @@ failed: static void sriov_release(struct pci_dev *dev) { - BUG_ON(dev->sriov->nr_virtfn); + BUG_ON(dev->sriov->num_VFs); if (dev != dev->sriov->dev) pci_dev_put(dev->sriov->dev); @@ -554,7 +554,7 @@ static void sriov_restore_state(struct pci_dev *dev) pci_update_resource(dev, i); pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz); - pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, iov->nr_virtfn); + pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, iov->num_VFs); pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); if (iov->ctrl & PCI_SRIOV_CTRL_VFE) msleep(100); @@ -661,7 +661,7 @@ int pci_iov_bus_range(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { if (!dev->is_physfn) continue; - busnr = virtfn_bus(dev, dev->sriov->total - 1); + busnr = virtfn_bus(dev, dev->sriov->total_VFs - 1); if (busnr > max) max = busnr; } @@ -729,9 +729,56 @@ EXPORT_SYMBOL_GPL(pci_sriov_migration); */ int pci_num_vf(struct pci_dev *dev) { - if (!dev || !dev->is_physfn) + if (!dev->is_physfn) return 0; - else - return dev->sriov->nr_virtfn; + + return dev->sriov->num_VFs; } EXPORT_SYMBOL_GPL(pci_num_vf); + +/** + * pci_sriov_set_totalvfs -- reduce the TotalVFs available + * @dev: the PCI PF device + * numvfs: number that should be used for TotalVFs supported + * + * Should be called from PF driver's probe routine with + * device's mutex held. + * + * Returns 0 if PF is an SRIOV-capable device and + * value of numvfs valid. If not a PF with VFS, return -EINVAL; + * if VFs already enabled, return -EBUSY. + */ +int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) +{ + if (!dev->is_physfn || (numvfs > dev->sriov->total_VFs)) + return -EINVAL; + + /* Shouldn't change if VFs already enabled */ + if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE) + return -EBUSY; + else + dev->sriov->driver_max_VFs = numvfs; + + return 0; +} +EXPORT_SYMBOL_GPL(pci_sriov_set_totalvfs); + +/** + * pci_sriov_get_totalvfs -- get total VFs supported on this devic3 + * @dev: the PCI PF device + * + * For a PCIe device with SRIOV support, return the PCIe + * SRIOV capability value of TotalVFs or the value of driver_max_VFs + * if the driver reduced it. Otherwise, -EINVAL. + */ +int pci_sriov_get_totalvfs(struct pci_dev *dev) +{ + if (!dev->is_physfn) + return -EINVAL; + + if (dev->sriov->driver_max_VFs) + return dev->sriov->driver_max_VFs; + + return dev->sriov->total_VFs; +} +EXPORT_SYMBOL_GPL(pci_sriov_get_totalvfs); diff --git a/drivers/pci/irq.c b/drivers/pci/irq.c index e5f69a43b1b..b008cf86b9c 100644 --- a/drivers/pci/irq.c +++ b/drivers/pci/irq.c @@ -14,11 +14,11 @@ static void pci_note_irq_problem(struct pci_dev *pdev, const char *reason) { struct pci_dev *parent = to_pci_dev(pdev->dev.parent); - dev_printk(KERN_ERR, &pdev->dev, - "Potentially misrouted IRQ (Bridge %s %04x:%04x)\n", - dev_name(&parent->dev), parent->vendor, parent->device); - dev_printk(KERN_ERR, &pdev->dev, "%s\n", reason); - dev_printk(KERN_ERR, &pdev->dev, "Please report to linux-kernel@vger.kernel.org\n"); + dev_err(&pdev->dev, + "Potentially misrouted IRQ (Bridge %s %04x:%04x)\n", + dev_name(&parent->dev), parent->vendor, parent->device); + dev_err(&pdev->dev, "%s\n", reason); + dev_err(&pdev->dev, "Please report to linux-kernel@vger.kernel.org\n"); WARN_ON(1); } diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index a825d78fd0a..5099636a6e5 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -207,6 +207,8 @@ static void msix_mask_irq(struct msi_desc *desc, u32 flag) desc->masked = __msix_mask_irq(desc, flag); } +#ifdef CONFIG_GENERIC_HARDIRQS + static void msi_set_mask_bit(struct irq_data *data, u32 flag) { struct msi_desc *desc = irq_data_get_msi(data); @@ -230,6 +232,8 @@ void unmask_msi_irq(struct irq_data *data) msi_set_mask_bit(data, 0); } +#endif /* CONFIG_GENERIC_HARDIRQS */ + void __read_msi_msg(struct msi_desc *entry, struct msi_msg *msg) { BUG_ON(entry->dev->current_state != PCI_D0); @@ -337,8 +341,10 @@ static void free_msi_irqs(struct pci_dev *dev) if (!entry->irq) continue; nvec = 1 << entry->msi_attrib.multiple; +#ifdef CONFIG_GENERIC_HARDIRQS for (i = 0; i < nvec; i++) BUG_ON(irq_has_action(entry->irq + i)); +#endif } arch_teardown_msi_irqs(dev); diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index c5792d622dc..1af4008182f 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -17,10 +17,9 @@ #include <linux/pci-acpi.h> #include <linux/pm_runtime.h> +#include <linux/pm_qos.h> #include "pci.h" -static DEFINE_MUTEX(pci_acpi_pm_notify_mtx); - /** * pci_acpi_wake_bus - Wake-up notification handler for root buses. * @handle: ACPI handle of a device the notification is for. @@ -68,67 +67,6 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context) } /** - * add_pm_notifier - Register PM notifier for given ACPI device. - * @dev: ACPI device to add the notifier for. - * @context: PCI device or bus to check for PME status if an event is signaled. - * - * NOTE: @dev need not be a run-wake or wake-up device to be a valid source of - * PM wake-up events. For example, wake-up events may be generated for bridges - * if one of the devices below the bridge is signaling PME, even if the bridge - * itself doesn't have a wake-up GPE associated with it. - */ -static acpi_status add_pm_notifier(struct acpi_device *dev, - acpi_notify_handler handler, - void *context) -{ - acpi_status status = AE_ALREADY_EXISTS; - - mutex_lock(&pci_acpi_pm_notify_mtx); - - if (dev->wakeup.flags.notifier_present) - goto out; - - status = acpi_install_notify_handler(dev->handle, - ACPI_SYSTEM_NOTIFY, - handler, context); - if (ACPI_FAILURE(status)) - goto out; - - dev->wakeup.flags.notifier_present = true; - - out: - mutex_unlock(&pci_acpi_pm_notify_mtx); - return status; -} - -/** - * remove_pm_notifier - Unregister PM notifier from given ACPI device. - * @dev: ACPI device to remove the notifier from. - */ -static acpi_status remove_pm_notifier(struct acpi_device *dev, - acpi_notify_handler handler) -{ - acpi_status status = AE_BAD_PARAMETER; - - mutex_lock(&pci_acpi_pm_notify_mtx); - - if (!dev->wakeup.flags.notifier_present) - goto out; - - status = acpi_remove_notify_handler(dev->handle, - ACPI_SYSTEM_NOTIFY, - handler); - if (ACPI_FAILURE(status)) - goto out; - - dev->wakeup.flags.notifier_present = false; - - out: - mutex_unlock(&pci_acpi_pm_notify_mtx); - return status; -} - -/** * pci_acpi_add_bus_pm_notifier - Register PM notifier for given PCI bus. * @dev: ACPI device to add the notifier for. * @pci_bus: PCI bus to walk checking for PME status if an event is signaled. @@ -136,7 +74,7 @@ static acpi_status remove_pm_notifier(struct acpi_device *dev, acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev, struct pci_bus *pci_bus) { - return add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus); + return acpi_add_pm_notifier(dev, pci_acpi_wake_bus, pci_bus); } /** @@ -145,7 +83,7 @@ acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev, */ acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev) { - return remove_pm_notifier(dev, pci_acpi_wake_bus); + return acpi_remove_pm_notifier(dev, pci_acpi_wake_bus); } /** @@ -156,7 +94,7 @@ acpi_status pci_acpi_remove_bus_pm_notifier(struct acpi_device *dev) acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, struct pci_dev *pci_dev) { - return add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev); + return acpi_add_pm_notifier(dev, pci_acpi_wake_dev, pci_dev); } /** @@ -165,7 +103,7 @@ acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, */ acpi_status pci_acpi_remove_pm_notifier(struct acpi_device *dev) { - return remove_pm_notifier(dev, pci_acpi_wake_dev); + return acpi_remove_pm_notifier(dev, pci_acpi_wake_dev); } phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle) @@ -257,11 +195,16 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) return -ENODEV; switch (state) { + case PCI_D3cold: + if (dev_pm_qos_flags(&dev->dev, PM_QOS_FLAG_NO_POWER_OFF) == + PM_QOS_FLAGS_ALL) { + error = -EBUSY; + break; + } case PCI_D0: case PCI_D1: case PCI_D2: case PCI_D3hot: - case PCI_D3cold: error = acpi_bus_set_power(handle, state_conv[state]); } diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 94c6e2aa03d..f79cbcd3944 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -89,10 +89,6 @@ static void pci_free_dynids(struct pci_driver *drv) spin_unlock(&drv->dynids.lock); } -/* - * Dynamic device ID manipulation via sysfs is disabled for !CONFIG_HOTPLUG - */ -#ifdef CONFIG_HOTPLUG /** * store_new_id - sysfs frontend to pci_add_dynid() * @driver: target device driver @@ -191,10 +187,6 @@ static struct driver_attribute pci_drv_attrs[] = { __ATTR_NULL, }; -#else -#define pci_drv_attrs NULL -#endif /* CONFIG_HOTPLUG */ - /** * pci_match_id - See if a pci device matches a given pci_id table * @ids: array of PCI device id structures to search in @@ -256,31 +248,26 @@ struct drv_dev_and_id { static long local_pci_probe(void *_ddi) { struct drv_dev_and_id *ddi = _ddi; - struct device *dev = &ddi->dev->dev; - struct device *parent = dev->parent; + struct pci_dev *pci_dev = ddi->dev; + struct pci_driver *pci_drv = ddi->drv; + struct device *dev = &pci_dev->dev; int rc; - /* The parent bridge must be in active state when probing */ - if (parent) - pm_runtime_get_sync(parent); - /* Unbound PCI devices are always set to disabled and suspended. - * During probe, the device is set to enabled and active and the - * usage count is incremented. If the driver supports runtime PM, - * it should call pm_runtime_put_noidle() in its probe routine and - * pm_runtime_get_noresume() in its remove routine. + /* + * Unbound PCI devices are always put in D0, regardless of + * runtime PM status. During probe, the device is set to + * active and the usage count is incremented. If the driver + * supports runtime PM, it should call pm_runtime_put_noidle() + * in its probe routine and pm_runtime_get_noresume() in its + * remove routine. */ - pm_runtime_get_noresume(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - - rc = ddi->drv->probe(ddi->dev, ddi->id); + pm_runtime_get_sync(dev); + pci_dev->driver = pci_drv; + rc = pci_drv->probe(pci_dev, ddi->id); if (rc) { - pm_runtime_disable(dev); - pm_runtime_set_suspended(dev); - pm_runtime_put_noidle(dev); + pci_dev->driver = NULL; + pm_runtime_put_sync(dev); } - if (parent) - pm_runtime_put(parent); return rc; } @@ -330,10 +317,8 @@ __pci_device_probe(struct pci_driver *drv, struct pci_dev *pci_dev) id = pci_match_device(drv, pci_dev); if (id) error = pci_call_probe(drv, pci_dev, id); - if (error >= 0) { - pci_dev->driver = drv; + if (error >= 0) error = 0; - } } return error; } @@ -369,9 +354,7 @@ static int pci_device_remove(struct device * dev) } /* Undo the runtime PM settings in local_pci_probe() */ - pm_runtime_disable(dev); - pm_runtime_set_suspended(dev); - pm_runtime_put_noidle(dev); + pm_runtime_put_sync(dev); /* * If the device is still on, set the power state as "unknown", @@ -398,6 +381,8 @@ static void pci_device_shutdown(struct device *dev) struct pci_dev *pci_dev = to_pci_dev(dev); struct pci_driver *drv = pci_dev->driver; + pm_runtime_resume(dev); + if (drv && drv->shutdown) drv->shutdown(pci_dev); pci_msi_shutdown(pci_dev); @@ -408,16 +393,6 @@ static void pci_device_shutdown(struct device *dev) * continue to do DMA */ pci_disable_device(pci_dev); - - /* - * Devices may be enabled to wake up by runtime PM, but they need not - * be supposed to wake up the system from its "power off" state (e.g. - * ACPI S5). Therefore disable wakeup for all devices that aren't - * supposed to wake up the system at this point. The state argument - * will be ignored by pci_enable_wake(). - */ - if (!device_may_wakeup(dev)) - pci_enable_wake(pci_dev, PCI_UNKNOWN, false); } #ifdef CONFIG_PM @@ -1002,6 +977,13 @@ static int pci_pm_runtime_suspend(struct device *dev) pci_power_t prev = pci_dev->current_state; int error; + /* + * If pci_dev->driver is not set (unbound), the device should + * always remain in D0 regardless of the runtime PM status + */ + if (!pci_dev->driver) + return 0; + if (!pm || !pm->runtime_suspend) return -ENOSYS; @@ -1023,10 +1005,10 @@ static int pci_pm_runtime_suspend(struct device *dev) return 0; } - if (!pci_dev->state_saved) + if (!pci_dev->state_saved) { pci_save_state(pci_dev); - - pci_finish_runtime_suspend(pci_dev); + pci_finish_runtime_suspend(pci_dev); + } return 0; } @@ -1037,6 +1019,13 @@ static int pci_pm_runtime_resume(struct device *dev) struct pci_dev *pci_dev = to_pci_dev(dev); const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + /* + * If pci_dev->driver is not set (unbound), the device should + * always remain in D0 regardless of the runtime PM status + */ + if (!pci_dev->driver) + return 0; + if (!pm || !pm->runtime_resume) return -ENOSYS; @@ -1054,8 +1043,16 @@ static int pci_pm_runtime_resume(struct device *dev) static int pci_pm_runtime_idle(struct device *dev) { + struct pci_dev *pci_dev = to_pci_dev(dev); const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; + /* + * If pci_dev->driver is not set (unbound), the device should + * always remain in D0 regardless of the runtime PM status + */ + if (!pci_dev->driver) + goto out; + if (!pm) return -ENOSYS; @@ -1065,8 +1062,8 @@ static int pci_pm_runtime_idle(struct device *dev) return ret; } +out: pm_runtime_suspend(dev); - return 0; } @@ -1231,12 +1228,38 @@ void pci_dev_put(struct pci_dev *dev) put_device(&dev->dev); } -#ifndef CONFIG_HOTPLUG -int pci_uevent(struct device *dev, struct kobj_uevent_env *env) +static int pci_uevent(struct device *dev, struct kobj_uevent_env *env) { - return -ENODEV; + struct pci_dev *pdev; + + if (!dev) + return -ENODEV; + + pdev = to_pci_dev(dev); + if (!pdev) + return -ENODEV; + + if (add_uevent_var(env, "PCI_CLASS=%04X", pdev->class)) + return -ENOMEM; + + if (add_uevent_var(env, "PCI_ID=%04X:%04X", pdev->vendor, pdev->device)) + return -ENOMEM; + + if (add_uevent_var(env, "PCI_SUBSYS_ID=%04X:%04X", pdev->subsystem_vendor, + pdev->subsystem_device)) + return -ENOMEM; + + if (add_uevent_var(env, "PCI_SLOT_NAME=%s", pci_name(pdev))) + return -ENOMEM; + + if (add_uevent_var(env, "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x", + pdev->vendor, pdev->device, + pdev->subsystem_vendor, pdev->subsystem_device, + (u8)(pdev->class >> 16), (u8)(pdev->class >> 8), + (u8)(pdev->class))) + return -ENOMEM; + return 0; } -#endif struct bus_type pci_bus_type = { .name = "pci", diff --git a/drivers/pci/pci-stub.c b/drivers/pci/pci-stub.c index 775e933c222..6e47c519c51 100644 --- a/drivers/pci/pci-stub.c +++ b/drivers/pci/pci-stub.c @@ -28,7 +28,7 @@ MODULE_PARM_DESC(ids, "Initial PCI IDs to add to the stub driver, format is " static int pci_stub_probe(struct pci_dev *dev, const struct pci_device_id *id) { - dev_printk(KERN_INFO, &dev->dev, "claimed by stub\n"); + dev_info(&dev->dev, "claimed by stub\n"); return 0; } diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 02d107b1528..05b78b16d20 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -284,7 +284,6 @@ msi_bus_store(struct device *dev, struct device_attribute *attr, return count; } -#ifdef CONFIG_HOTPLUG static DEFINE_MUTEX(pci_remove_rescan_mutex); static ssize_t bus_rescan_store(struct bus_type *bus, const char *buf, size_t count) @@ -377,8 +376,6 @@ dev_bus_rescan_store(struct device *dev, struct device_attribute *attr, return count; } -#endif - #if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI) static ssize_t d3cold_allowed_store(struct device *dev, struct device_attribute *attr, @@ -404,6 +401,106 @@ static ssize_t d3cold_allowed_show(struct device *dev, } #endif +#ifdef CONFIG_PCI_IOV +static ssize_t sriov_totalvfs_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct pci_dev *pdev = to_pci_dev(dev); + + return sprintf(buf, "%u\n", pci_sriov_get_totalvfs(pdev)); +} + + +static ssize_t sriov_numvfs_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct pci_dev *pdev = to_pci_dev(dev); + + return sprintf(buf, "%u\n", pdev->sriov->num_VFs); +} + +/* + * num_vfs > 0; number of vfs to enable + * num_vfs = 0; disable all vfs + * + * Note: SRIOV spec doesn't allow partial VF + * disable, so its all or none. + */ +static ssize_t sriov_numvfs_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int num_vfs_enabled = 0; + int num_vfs; + int ret = 0; + u16 total; + + if (kstrtoint(buf, 0, &num_vfs) < 0) + return -EINVAL; + + /* is PF driver loaded w/callback */ + if (!pdev->driver || !pdev->driver->sriov_configure) { + dev_info(&pdev->dev, + "Driver doesn't support SRIOV configuration via sysfs\n"); + return -ENOSYS; + } + + /* if enabling vf's ... */ + total = pci_sriov_get_totalvfs(pdev); + /* Requested VFs to enable < totalvfs and none enabled already */ + if ((num_vfs > 0) && (num_vfs <= total)) { + if (pdev->sriov->num_VFs == 0) { + num_vfs_enabled = + pdev->driver->sriov_configure(pdev, num_vfs); + if ((num_vfs_enabled >= 0) && + (num_vfs_enabled != num_vfs)) { + dev_warn(&pdev->dev, + "Only %d VFs enabled\n", + num_vfs_enabled); + return count; + } else if (num_vfs_enabled < 0) + /* error code from driver callback */ + return num_vfs_enabled; + } else if (num_vfs == pdev->sriov->num_VFs) { + dev_warn(&pdev->dev, + "%d VFs already enabled; no enable action taken\n", + num_vfs); + return count; + } else { + dev_warn(&pdev->dev, + "%d VFs already enabled. Disable before enabling %d VFs\n", + pdev->sriov->num_VFs, num_vfs); + return -EINVAL; + } + } + + /* disable vfs */ + if (num_vfs == 0) { + if (pdev->sriov->num_VFs != 0) { + ret = pdev->driver->sriov_configure(pdev, 0); + return ret ? ret : count; + } else { + dev_warn(&pdev->dev, + "All VFs disabled; no disable action taken\n"); + return count; + } + } + + dev_err(&pdev->dev, + "Invalid value for number of VFs to enable: %d\n", num_vfs); + + return -EINVAL; +} + +static struct device_attribute sriov_totalvfs_attr = __ATTR_RO(sriov_totalvfs); +static struct device_attribute sriov_numvfs_attr = + __ATTR(sriov_numvfs, (S_IRUGO|S_IWUSR|S_IWGRP), + sriov_numvfs_show, sriov_numvfs_store); +#endif /* CONFIG_PCI_IOV */ + struct device_attribute pci_dev_attrs[] = { __ATTR_RO(resource), __ATTR_RO(vendor), @@ -424,10 +521,8 @@ struct device_attribute pci_dev_attrs[] = { __ATTR(broken_parity_status,(S_IRUGO|S_IWUSR), broken_parity_status_show,broken_parity_status_store), __ATTR(msi_bus, 0644, msi_bus_show, msi_bus_store), -#ifdef CONFIG_HOTPLUG __ATTR(remove, (S_IWUSR|S_IWGRP), NULL, remove_store), __ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_rescan_store), -#endif #if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI) __ATTR(d3cold_allowed, 0644, d3cold_allowed_show, d3cold_allowed_store), #endif @@ -435,9 +530,7 @@ struct device_attribute pci_dev_attrs[] = { }; struct device_attribute pcibus_dev_attrs[] = { -#ifdef CONFIG_HOTPLUG __ATTR(rescan, (S_IWUSR|S_IWGRP), NULL, dev_bus_rescan_store), -#endif __ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpumaskaffinity, NULL), __ATTR(cpulistaffinity, S_IRUGO, pci_bus_show_cpulistaffinity, NULL), __ATTR_NULL, @@ -458,40 +551,6 @@ boot_vga_show(struct device *dev, struct device_attribute *attr, char *buf) } struct device_attribute vga_attr = __ATTR_RO(boot_vga); -static void -pci_config_pm_runtime_get(struct pci_dev *pdev) -{ - struct device *dev = &pdev->dev; - struct device *parent = dev->parent; - - if (parent) - pm_runtime_get_sync(parent); - pm_runtime_get_noresume(dev); - /* - * pdev->current_state is set to PCI_D3cold during suspending, - * so wait until suspending completes - */ - pm_runtime_barrier(dev); - /* - * Only need to resume devices in D3cold, because config - * registers are still accessible for devices suspended but - * not in D3cold. - */ - if (pdev->current_state == PCI_D3cold) - pm_runtime_resume(dev); -} - -static void -pci_config_pm_runtime_put(struct pci_dev *pdev) -{ - struct device *dev = &pdev->dev; - struct device *parent = dev->parent; - - pm_runtime_put(dev); - if (parent) - pm_runtime_put_sync(parent); -} - static ssize_t pci_read_config(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, @@ -1303,29 +1362,20 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) pdev->rom_attr = attr; } - if ((pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA) { - retval = device_create_file(&pdev->dev, &vga_attr); - if (retval) - goto err_rom_file; - } - /* add platform-specific attributes */ retval = pcibios_add_platform_entries(pdev); if (retval) - goto err_vga_file; + goto err_rom_file; /* add sysfs entries for various capabilities */ retval = pci_create_capabilities_sysfs(pdev); if (retval) - goto err_vga_file; + goto err_rom_file; pci_create_firmware_label_files(pdev); return 0; -err_vga_file: - if ((pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA) - device_remove_file(&pdev->dev, &vga_attr); err_rom_file: if (rom_size) { sysfs_remove_bin_file(&pdev->dev.kobj, pdev->rom_attr); @@ -1411,3 +1461,62 @@ static int __init pci_sysfs_init(void) } late_initcall(pci_sysfs_init); + +static struct attribute *pci_dev_dev_attrs[] = { + &vga_attr.attr, + NULL, +}; + +static umode_t pci_dev_attrs_are_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct pci_dev *pdev = to_pci_dev(dev); + + if (a == &vga_attr.attr) + if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA) + return 0; + + return a->mode; +} + +#ifdef CONFIG_PCI_IOV +static struct attribute *sriov_dev_attrs[] = { + &sriov_totalvfs_attr.attr, + &sriov_numvfs_attr.attr, + NULL, +}; + +static umode_t sriov_attrs_are_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + + if (!dev_is_pf(dev)) + return 0; + + return a->mode; +} + +static struct attribute_group sriov_dev_attr_group = { + .attrs = sriov_dev_attrs, + .is_visible = sriov_attrs_are_visible, +}; +#endif /* CONFIG_PCI_IOV */ + +static struct attribute_group pci_dev_attr_group = { + .attrs = pci_dev_dev_attrs, + .is_visible = pci_dev_attrs_are_visible, +}; + +static const struct attribute_group *pci_dev_attr_groups[] = { + &pci_dev_attr_group, +#ifdef CONFIG_PCI_IOV + &sriov_dev_attr_group, +#endif + NULL, +}; + +struct device_type pci_dev_type = { + .groups = pci_dev_attr_groups, +}; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 54858838f09..5cb5820fae4 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -86,7 +86,7 @@ enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF; * the dfl or actual value as it sees fit. Don't forget this is * measured in 32-bit words, not bytes. */ -u8 pci_dfl_cache_line_size __devinitdata = L1_CACHE_BYTES >> 2; +u8 pci_dfl_cache_line_size = L1_CACHE_BYTES >> 2; u8 pci_cache_line_size; /* @@ -1333,6 +1333,19 @@ void pcim_pin_device(struct pci_dev *pdev) dr->pinned = 1; } +/* + * pcibios_add_device - provide arch specific hooks when adding device dev + * @dev: the PCI device being added + * + * Permits the platform to provide architecture specific functionality when + * devices are added. This is the default implementation. Architecture + * implementations can override this. + */ +int __weak pcibios_add_device (struct pci_dev *dev) +{ + return 0; +} + /** * pcibios_disable_device - disable arch specific PCI resources for device dev * @dev: the PCI device to disable @@ -1578,15 +1591,25 @@ void pci_pme_active(struct pci_dev *dev, bool enable) pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); - /* PCI (as opposed to PCIe) PME requires that the device have - its PME# line hooked up correctly. Not all hardware vendors - do this, so the PME never gets delivered and the device - remains asleep. The easiest way around this is to - periodically walk the list of suspended devices and check - whether any have their PME flag set. The assumption is that - we'll wake up often enough anyway that this won't be a huge - hit, and the power savings from the devices will still be a - win. */ + /* + * PCI (as opposed to PCIe) PME requires that the device have + * its PME# line hooked up correctly. Not all hardware vendors + * do this, so the PME never gets delivered and the device + * remains asleep. The easiest way around this is to + * periodically walk the list of suspended devices and check + * whether any have their PME flag set. The assumption is that + * we'll wake up often enough anyway that this won't be a huge + * hit, and the power savings from the devices will still be a + * win. + * + * Although PCIe uses in-band PME message instead of PME# line + * to report PME, PME does not work for some PCIe devices in + * reality. For example, there are devices that set their PME + * status bits, but don't really bother to send a PME message; + * there are PCI Express Root Ports that don't bother to + * trigger interrupts when they receive PME messages from the + * devices below. So PME poll is used for PCIe devices too. + */ if (dev->pme_poll) { struct pci_pme_device *pme_dev; @@ -1858,6 +1881,38 @@ bool pci_dev_run_wake(struct pci_dev *dev) } EXPORT_SYMBOL_GPL(pci_dev_run_wake); +void pci_config_pm_runtime_get(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + + if (parent) + pm_runtime_get_sync(parent); + pm_runtime_get_noresume(dev); + /* + * pdev->current_state is set to PCI_D3cold during suspending, + * so wait until suspending completes + */ + pm_runtime_barrier(dev); + /* + * Only need to resume devices in D3cold, because config + * registers are still accessible for devices suspended but + * not in D3cold. + */ + if (pdev->current_state == PCI_D3cold) + pm_runtime_resume(dev); +} + +void pci_config_pm_runtime_put(struct pci_dev *pdev) +{ + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + + pm_runtime_put(dev); + if (parent) + pm_runtime_put_sync(parent); +} + /** * pci_pm_init - Initialize PM functions of given PCI device * @dev: PCI device to handle. @@ -1868,6 +1923,8 @@ void pci_pm_init(struct pci_dev *dev) u16 pmc; pm_runtime_forbid(&dev->dev); + pm_runtime_set_active(&dev->dev); + pm_runtime_enable(&dev->dev); device_enable_async_suspend(&dev->dev); dev->wakeup_prepared = false; @@ -3825,7 +3882,7 @@ static int __init pci_resource_alignment_sysfs_init(void) late_initcall(pci_resource_alignment_sysfs_init); -static void __devinit pci_no_domains(void) +static void pci_no_domains(void) { #ifdef CONFIG_PCI_DOMAINS pci_domains_supported = 0; @@ -3833,14 +3890,13 @@ static void __devinit pci_no_domains(void) } /** - * pci_ext_cfg_enabled - can we access extended PCI config space? - * @dev: The PCI device of the root bridge. + * pci_ext_cfg_avail - can we access extended PCI config space? * * Returns 1 if we can access PCI extended config space (offsets * greater than 0xff). This is the default implementation. Architecture * implementations can override this. */ -int __weak pci_ext_cfg_avail(struct pci_dev *dev) +int __weak pci_ext_cfg_avail(void) { return 1; } diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index bacbcba69cf..e8518292826 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -8,7 +8,6 @@ /* Functions internal to the PCI core code */ -extern int pci_uevent(struct device *dev, struct kobj_uevent_env *env); extern int pci_create_sysfs_dev_files(struct pci_dev *pdev); extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev); #if !defined(CONFIG_DMI) && !defined(CONFIG_ACPI) @@ -72,6 +71,8 @@ extern void pci_disable_enabled_device(struct pci_dev *dev); extern int pci_finish_runtime_suspend(struct pci_dev *dev); extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign); extern void pci_wakeup_bus(struct pci_bus *bus); +extern void pci_config_pm_runtime_get(struct pci_dev *dev); +extern void pci_config_pm_runtime_put(struct pci_dev *dev); extern void pci_pm_init(struct pci_dev *dev); extern void platform_pci_wakeup_init(struct pci_dev *dev); extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); @@ -157,11 +158,8 @@ static inline int pci_no_d1d2(struct pci_dev *dev) } extern struct device_attribute pci_dev_attrs[]; extern struct device_attribute pcibus_dev_attrs[]; -#ifdef CONFIG_HOTPLUG +extern struct device_type pci_dev_type; extern struct bus_attribute pci_bus_attrs[]; -#else -#define pci_bus_attrs NULL -#endif /** @@ -232,13 +230,14 @@ struct pci_sriov { int nres; /* number of resources */ u32 cap; /* SR-IOV Capabilities */ u16 ctrl; /* SR-IOV Control */ - u16 total; /* total VFs associated with the PF */ - u16 initial; /* initial VFs associated with the PF */ - u16 nr_virtfn; /* number of VFs available */ + u16 total_VFs; /* total VFs associated with the PF */ + u16 initial_VFs; /* initial VFs associated with the PF */ + u16 num_VFs; /* number of VFs available */ u16 offset; /* first VF Routing ID offset */ u16 stride; /* following VF stride */ u32 pgsz; /* page size for BAR alignment */ u8 link; /* Function Dependency Link */ + u16 driver_max_VFs; /* max num VFs driver supports */ struct pci_dev *dev; /* lowest numbered PF */ struct pci_dev *self; /* this PF */ struct mutex lock; /* lock for VF bus */ diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 030cf12d546..76ef634caf6 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -41,7 +41,7 @@ MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -static int __devinit aer_probe(struct pcie_device *dev); +static int aer_probe(struct pcie_device *dev); static void aer_remove(struct pcie_device *dev); static pci_ers_result_t aer_error_detected(struct pci_dev *dev, enum pci_channel_state error); @@ -300,7 +300,7 @@ static void aer_remove(struct pcie_device *dev) * * Invoked when PCI Express bus loads AER service driver. */ -static int __devinit aer_probe(struct pcie_device *dev) +static int aer_probe(struct pcie_device *dev) { int status; struct aer_rpc *rpc; diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h index 94a7598eb26..22f840f4dda 100644 --- a/drivers/pci/pcie/aer/aerdrv.h +++ b/drivers/pci/pcie/aer/aerdrv.h @@ -87,6 +87,9 @@ struct aer_broadcast_data { static inline pci_ers_result_t merge_result(enum pci_ers_result orig, enum pci_ers_result new) { + if (new == PCI_ERS_RESULT_NO_AER_DRIVER) + return PCI_ERS_RESULT_NO_AER_DRIVER; + if (new == PCI_ERS_RESULT_NONE) return orig; @@ -97,7 +100,7 @@ static inline pci_ers_result_t merge_result(enum pci_ers_result orig, break; case PCI_ERS_RESULT_DISCONNECT: if (new == PCI_ERS_RESULT_NEED_RESET) - orig = new; + orig = PCI_ERS_RESULT_NEED_RESET; break; default: break; diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 06bad96af41..421bbc5fee3 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -213,6 +213,7 @@ static int report_error_detected(struct pci_dev *dev, void *data) struct aer_broadcast_data *result_data; result_data = (struct aer_broadcast_data *) data; + device_lock(&dev->dev); dev->error_state = result_data->state; if (!dev->driver || @@ -231,12 +232,28 @@ static int report_error_detected(struct pci_dev *dev, void *data) dev->driver ? "no AER-aware driver" : "no driver"); } - return 0; + + /* + * If there's any device in the subtree that does not + * have an error_detected callback, returning + * PCI_ERS_RESULT_NO_AER_DRIVER prevents calling of + * the subsequent mmio_enabled/slot_reset/resume + * callbacks of "any" device in the subtree. All the + * devices in the subtree are left in the error state + * without recovery. + */ + + if (!(dev->hdr_type & PCI_HEADER_TYPE_BRIDGE)) + vote = PCI_ERS_RESULT_NO_AER_DRIVER; + else + vote = PCI_ERS_RESULT_NONE; + } else { + err_handler = dev->driver->err_handler; + vote = err_handler->error_detected(dev, result_data->state); } - err_handler = dev->driver->err_handler; - vote = err_handler->error_detected(dev, result_data->state); result_data->result = merge_result(result_data->result, vote); + device_unlock(&dev->dev); return 0; } @@ -247,14 +264,17 @@ static int report_mmio_enabled(struct pci_dev *dev, void *data) struct aer_broadcast_data *result_data; result_data = (struct aer_broadcast_data *) data; + device_lock(&dev->dev); if (!dev->driver || !dev->driver->err_handler || !dev->driver->err_handler->mmio_enabled) - return 0; + goto out; err_handler = dev->driver->err_handler; vote = err_handler->mmio_enabled(dev); result_data->result = merge_result(result_data->result, vote); +out: + device_unlock(&dev->dev); return 0; } @@ -265,14 +285,17 @@ static int report_slot_reset(struct pci_dev *dev, void *data) struct aer_broadcast_data *result_data; result_data = (struct aer_broadcast_data *) data; + device_lock(&dev->dev); if (!dev->driver || !dev->driver->err_handler || !dev->driver->err_handler->slot_reset) - return 0; + goto out; err_handler = dev->driver->err_handler; vote = err_handler->slot_reset(dev); result_data->result = merge_result(result_data->result, vote); +out: + device_unlock(&dev->dev); return 0; } @@ -280,15 +303,18 @@ static int report_resume(struct pci_dev *dev, void *data) { const struct pci_error_handlers *err_handler; + device_lock(&dev->dev); dev->error_state = pci_channel_io_normal; if (!dev->driver || !dev->driver->err_handler || !dev->driver->err_handler->resume) - return 0; + goto out; err_handler = dev->driver->err_handler; err_handler->resume(dev); +out: + device_unlock(&dev->dev); return 0; } diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 213753b283a..b52630b8ead 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -242,8 +242,7 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) return; /* Training failed. Restore common clock configurations */ - dev_printk(KERN_ERR, &parent->dev, - "ASPM: Could not configure common clock\n"); + dev_err(&parent->dev, "ASPM: Could not configure common clock\n"); list_for_each_entry(child, &linkbus->devices, bus_list) pcie_capability_write_word(child, PCI_EXP_LNKCTL, child_reg[PCI_FUNC(child->devfn)]); @@ -427,7 +426,8 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val) { - pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL, 0x3, val); + pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL, + PCI_EXP_LNKCTL_ASPMC, val); } static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state) @@ -442,12 +442,12 @@ static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state) return; /* Convert ASPM state to upstream/downstream ASPM register state */ if (state & ASPM_STATE_L0S_UP) - dwstream |= PCIE_LINK_STATE_L0S; + dwstream |= PCI_EXP_LNKCTL_ASPM_L0S; if (state & ASPM_STATE_L0S_DW) - upstream |= PCIE_LINK_STATE_L0S; + upstream |= PCI_EXP_LNKCTL_ASPM_L0S; if (state & ASPM_STATE_L1) { - upstream |= PCIE_LINK_STATE_L1; - dwstream |= PCIE_LINK_STATE_L1; + upstream |= PCI_EXP_LNKCTL_ASPM_L1; + dwstream |= PCI_EXP_LNKCTL_ASPM_L1; } /* * Spec 2.0 suggests all functions should be configured the @@ -507,9 +507,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) */ pcie_capability_read_dword(child, PCI_EXP_DEVCAP, ®32); if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) { - dev_printk(KERN_INFO, &child->dev, "disabling ASPM" - " on pre-1.1 PCIe device. You can enable it" - " with 'pcie_aspm=force'\n"); + dev_info(&child->dev, "disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'\n"); return -EINVAL; } } diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index d03a7a39b2d..b42133afca9 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -120,8 +120,7 @@ static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask) * the value in this field indicates which MSI-X Table entry is * used to generate the interrupt message." */ - pos = pci_pcie_cap(dev); - pci_read_config_word(dev, pos + PCI_EXP_FLAGS, ®16); + pcie_capability_read_word(dev, PCI_EXP_FLAGS, ®16); entry = (reg16 & PCI_EXP_FLAGS_IRQ) >> 9; if (entry >= nr_entries) goto Error; @@ -272,7 +271,8 @@ static int get_port_device_capability(struct pci_dev *dev) } /* Hot-Plug Capable */ - if (cap_mask & PCIE_PORT_SERVICE_HP) { + if ((cap_mask & PCIE_PORT_SERVICE_HP) && + dev->pcie_flags_reg & PCI_EXP_FLAGS_SLOT) { pcie_capability_read_dword(dev, PCI_EXP_SLTCAP, ®32); if (reg32 & PCI_EXP_SLTCAP_HPC) { services |= PCIE_PORT_SERVICE_HP; diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index 0761d90ca27..d4824cb78b4 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -182,7 +182,7 @@ static const struct pci_device_id port_runtime_pm_black_list[] = { * this port device. * */ -static int __devinit pcie_portdrv_probe(struct pci_dev *dev, +static int pcie_portdrv_probe(struct pci_dev *dev, const struct pci_device_id *id) { int status; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index ec909afa90b..6186f03d84f 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -305,7 +305,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) } } -static void __devinit pci_read_bridge_io(struct pci_bus *child) +static void pci_read_bridge_io(struct pci_bus *child) { struct pci_dev *dev = child->self; u8 io_base_lo, io_limit_lo; @@ -345,7 +345,7 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child) } } -static void __devinit pci_read_bridge_mmio(struct pci_bus *child) +static void pci_read_bridge_mmio(struct pci_bus *child) { struct pci_dev *dev = child->self; u16 mem_base_lo, mem_limit_lo; @@ -367,7 +367,7 @@ static void __devinit pci_read_bridge_mmio(struct pci_bus *child) } } -static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) +static void pci_read_bridge_mmio_pref(struct pci_bus *child) { struct pci_dev *dev = child->self; u16 mem_base_lo, mem_limit_lo; @@ -417,7 +417,7 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) } } -void __devinit pci_read_bridge_bases(struct pci_bus *child) +void pci_read_bridge_bases(struct pci_bus *child) { struct pci_dev *dev = child->self; struct resource *res; @@ -521,7 +521,7 @@ static unsigned char pcie_link_speed[] = { void pcie_update_link_speed(struct pci_bus *bus, u16 linksta) { - bus->cur_bus_speed = pcie_link_speed[linksta & 0xf]; + bus->cur_bus_speed = pcie_link_speed[linksta & PCI_EXP_LNKSTA_CLS]; } EXPORT_SYMBOL_GPL(pcie_update_link_speed); @@ -579,14 +579,16 @@ static void pci_set_bus_speed(struct pci_bus *bus) if (pos) { u16 status; enum pci_bus_speed max; - pci_read_config_word(bridge, pos + 2, &status); - if (status & 0x8000) { + pci_read_config_word(bridge, pos + PCI_X_BRIDGE_SSTATUS, + &status); + + if (status & PCI_X_SSTATUS_533MHZ) { max = PCI_SPEED_133MHz_PCIX_533; - } else if (status & 0x4000) { + } else if (status & PCI_X_SSTATUS_266MHZ) { max = PCI_SPEED_133MHz_PCIX_266; - } else if (status & 0x0002) { - if (((status >> 12) & 0x3) == 2) { + } else if (status & PCI_X_SSTATUS_133MHZ) { + if ((status & PCI_X_SSTATUS_VERS) == PCI_X_SSTATUS_V2) { max = PCI_SPEED_133MHz_PCIX_ECC; } else { max = PCI_SPEED_133MHz_PCIX; @@ -596,7 +598,8 @@ static void pci_set_bus_speed(struct pci_bus *bus) } bus->max_bus_speed = max; - bus->cur_bus_speed = pcix_bus_speed[(status >> 6) & 0xf]; + bus->cur_bus_speed = pcix_bus_speed[ + (status & PCI_X_SSTATUS_FREQ) >> 6]; return; } @@ -607,7 +610,7 @@ static void pci_set_bus_speed(struct pci_bus *bus) u16 linksta; pcie_capability_read_dword(bridge, PCI_EXP_LNKCAP, &linkcap); - bus->max_bus_speed = pcie_link_speed[linkcap & 0xf]; + bus->max_bus_speed = pcie_link_speed[linkcap & PCI_EXP_LNKCAP_SLS]; pcie_capability_read_word(bridge, PCI_EXP_LNKSTA, &linksta); pcie_update_link_speed(bus, linksta); @@ -705,7 +708,7 @@ static void pci_fixup_parent_subordinate_busnr(struct pci_bus *child, int max) * them, we proceed to assigning numbers to the remaining buses in * order to avoid overlaps between old and new bus numbers. */ -int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) +int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) { struct pci_bus *child; int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); @@ -975,6 +978,7 @@ int pci_setup_device(struct pci_dev *dev) dev->sysdata = dev->bus->sysdata; dev->dev.parent = dev->bus->bridge; dev->dev.bus = &pci_bus_type; + dev->dev.type = &pci_dev_type; dev->hdr_type = hdr_type & 0x7f; dev->multifunction = !!(hdr_type & 0x80); dev->error_state = pci_channel_io_normal; @@ -1586,7 +1590,7 @@ void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss) } EXPORT_SYMBOL_GPL(pcie_bus_configure_settings); -unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus) +unsigned int pci_scan_child_bus(struct pci_bus *bus) { unsigned int devfn, pass, max = bus->busn_res.start; struct pci_dev *dev; @@ -1790,7 +1794,7 @@ void pci_bus_release_busn_res(struct pci_bus *b) res, ret ? "can not be" : "is"); } -struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus, +struct pci_bus *pci_scan_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources) { struct pci_host_bridge_window *window; @@ -1826,7 +1830,7 @@ struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus, EXPORT_SYMBOL(pci_scan_root_bus); /* Deprecated; use pci_scan_root_bus() instead */ -struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent, +struct pci_bus *pci_scan_bus_parented(struct device *parent, int bus, struct pci_ops *ops, void *sysdata) { LIST_HEAD(resources); @@ -1844,7 +1848,7 @@ struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent, } EXPORT_SYMBOL(pci_scan_bus_parented); -struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops, +struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata) { LIST_HEAD(resources); @@ -1864,7 +1868,6 @@ struct pci_bus * __devinit pci_scan_bus(int bus, struct pci_ops *ops, } EXPORT_SYMBOL(pci_scan_bus); -#ifdef CONFIG_HOTPLUG /** * pci_rescan_bus_bridge_resize - scan a PCI bus for devices. * @bridge: PCI bridge for the bus to scan @@ -1890,11 +1893,32 @@ unsigned int __ref pci_rescan_bus_bridge_resize(struct pci_dev *bridge) return max; } +/** + * pci_rescan_bus - scan a PCI bus for devices. + * @bus: PCI bus to scan + * + * Scan a PCI bus and child buses for new devices, adds them, + * and enables them. + * + * Returns the max number of subordinate bus discovered. + */ +unsigned int __ref pci_rescan_bus(struct pci_bus *bus) +{ + unsigned int max; + + max = pci_scan_child_bus(bus); + pci_assign_unassigned_bus_resources(bus); + pci_enable_bridges(bus); + pci_bus_add_devices(bus); + + return max; +} +EXPORT_SYMBOL_GPL(pci_rescan_bus); + EXPORT_SYMBOL(pci_add_new_bus); EXPORT_SYMBOL(pci_scan_slot); EXPORT_SYMBOL(pci_scan_bridge); EXPORT_SYMBOL_GPL(pci_scan_child_bus); -#endif static int __init pci_sort_bf_cmp(const struct device *d_a, const struct device *d_b) { diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index eb907a8faf2..9b8505ccc56 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -76,6 +76,8 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp if (!access_ok(VERIFY_WRITE, buf, cnt)) return -EINVAL; + pci_config_pm_runtime_get(dev); + if ((pos & 1) && cnt) { unsigned char val; pci_user_read_config_byte(dev, pos, &val); @@ -121,6 +123,8 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp cnt--; } + pci_config_pm_runtime_put(dev); + *ppos = pos; return nbytes; } @@ -146,6 +150,8 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof if (!access_ok(VERIFY_READ, buf, cnt)) return -EINVAL; + pci_config_pm_runtime_get(dev); + if ((pos & 1) && cnt) { unsigned char val; __get_user(val, buf); @@ -191,6 +197,8 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof cnt--; } + pci_config_pm_runtime_put(dev); + *ppos = pos; i_size_write(ino, dp->size); return nbytes; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 7a451ff56ec..8f7a6344e79 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -37,7 +37,7 @@ * key system devices. For devices that need to have mmio decoding always-on, * we need to set the dev->mmio_always_on bit. */ -static void __devinit quirk_mmio_always_on(struct pci_dev *dev) +static void quirk_mmio_always_on(struct pci_dev *dev) { dev->mmio_always_on = 1; } @@ -48,7 +48,7 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, * Mark this device with a broken_parity_status, to allow * PCI scanning code to "skip" this now blacklisted device. */ -static void __devinit quirk_mellanox_tavor(struct pci_dev *dev) +static void quirk_mellanox_tavor(struct pci_dev *dev) { dev->broken_parity_status = 1; /* This device gives false positives */ } @@ -83,7 +83,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_p This appears to be BIOS not version dependent. So presumably there is a chipset level fix */ -static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev) +static void quirk_isa_dma_hangs(struct pci_dev *dev) { if (!isa_dma_bridge_buggy) { isa_dma_bridge_buggy=1; @@ -106,7 +106,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_d * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear * for some HT machines to use C4 w/o hanging. */ -static void __devinit quirk_tigerpoint_bm_sts(struct pci_dev *dev) +static void quirk_tigerpoint_bm_sts(struct pci_dev *dev) { u32 pmbase; u16 pm1a; @@ -125,7 +125,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk /* * Chipsets where PCI->PCI transfers vanish or hang */ -static void __devinit quirk_nopcipci(struct pci_dev *dev) +static void quirk_nopcipci(struct pci_dev *dev) { if ((pci_pci_problems & PCIPCI_FAIL)==0) { dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n"); @@ -135,7 +135,7 @@ static void __devinit quirk_nopcipci(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); -static void __devinit quirk_nopciamd(struct pci_dev *dev) +static void quirk_nopciamd(struct pci_dev *dev) { u8 rev; pci_read_config_byte(dev, 0x08, &rev); @@ -150,7 +150,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopci /* * Triton requires workarounds to be used by the drivers */ -static void __devinit quirk_triton(struct pci_dev *dev) +static void quirk_triton(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_TRITON)==0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); @@ -229,7 +229,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_viala /* * VIA Apollo VP3 needs ETBF on BT848/878 */ -static void __devinit quirk_viaetbf(struct pci_dev *dev) +static void quirk_viaetbf(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_VIAETBF)==0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); @@ -238,7 +238,7 @@ static void __devinit quirk_viaetbf(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); -static void __devinit quirk_vsfx(struct pci_dev *dev) +static void quirk_vsfx(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_VSFX)==0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); @@ -253,7 +253,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx) * workaround applied too * [Info kindly provided by ALi] */ -static void __devinit quirk_alimagik(struct pci_dev *dev) +static void quirk_alimagik(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); @@ -267,7 +267,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimag * Natoma has some interesting boundary conditions with Zoran stuff * at least */ -static void __devinit quirk_natoma(struct pci_dev *dev) +static void quirk_natoma(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_NATOMA)==0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); @@ -285,7 +285,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, qu * This chip can cause PCI parity errors if config register 0xA0 is read * while DMAs are occurring. */ -static void __devinit quirk_citrine(struct pci_dev *dev) +static void quirk_citrine(struct pci_dev *dev) { dev->cfg_size = 0xA0; } @@ -295,7 +295,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_cit * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. * If it's needed, re-allocate the region. */ -static void __devinit quirk_s3_64M(struct pci_dev *dev) +static void quirk_s3_64M(struct pci_dev *dev) { struct resource *r = &dev->resource[0]; @@ -313,7 +313,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); * BAR0 should be 8 bytes; instead, it may be set to something like 8k * (which conflicts w/ BAR1's memory range). */ -static void __devinit quirk_cs5536_vsa(struct pci_dev *dev) +static void quirk_cs5536_vsa(struct pci_dev *dev) { if (pci_resource_len(dev, 0) != 8) { struct resource *res = &dev->resource[0]; @@ -324,7 +324,7 @@ static void __devinit quirk_cs5536_vsa(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); -static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, +static void quirk_io_region(struct pci_dev *dev, unsigned region, unsigned size, int nr, const char *name) { region &= ~(size-1); @@ -352,7 +352,7 @@ static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, * ATI Northbridge setups MCE the processor if you even * read somewhere between 0x3b0->0x3bb or read 0x3d3 */ -static void __devinit quirk_ati_exploding_mce(struct pci_dev *dev) +static void quirk_ati_exploding_mce(struct pci_dev *dev) { dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ @@ -372,7 +372,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_ * 0xE0 (64 bytes of ACPI registers) * 0xE2 (32 bytes of SMB registers) */ -static void __devinit quirk_ali7101_acpi(struct pci_dev *dev) +static void quirk_ali7101_acpi(struct pci_dev *dev) { u16 region; @@ -440,7 +440,7 @@ static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int * 0x90 (16 bytes of SMB registers) * and a few strange programmable PIIX4 device resources. */ -static void __devinit quirk_piix4_acpi(struct pci_dev *dev) +static void quirk_piix4_acpi(struct pci_dev *dev) { u32 region, res_a; @@ -489,7 +489,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, qui * 0x40 (128 bytes of ACPI, GPIO & TCO registers) * 0x58 (64 bytes of GPIO I/O space) */ -static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev) +static void quirk_ich4_lpc_acpi(struct pci_dev *dev) { u32 region; u8 enable; @@ -531,7 +531,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi); -static void __devinit ich6_lpc_acpi_gpio(struct pci_dev *dev) +static void ich6_lpc_acpi_gpio(struct pci_dev *dev) { u32 region; u8 enable; @@ -555,7 +555,7 @@ static void __devinit ich6_lpc_acpi_gpio(struct pci_dev *dev) } } -static void __devinit ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize) +static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize) { u32 val; u32 size, base; @@ -583,7 +583,7 @@ static void __devinit ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); } -static void __devinit quirk_ich6_lpc(struct pci_dev *dev) +static void quirk_ich6_lpc(struct pci_dev *dev) { /* Shared ACPI/GPIO decode with all ICH6+ */ ich6_lpc_acpi_gpio(dev); @@ -595,7 +595,7 @@ static void __devinit quirk_ich6_lpc(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); -static void __devinit ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name) +static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name) { u32 val; u32 mask, base; @@ -619,7 +619,7 @@ static void __devinit ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, } /* ICH7-10 has the same common LPC generic IO decode registers */ -static void __devinit quirk_ich7_lpc(struct pci_dev *dev) +static void quirk_ich7_lpc(struct pci_dev *dev) { /* We share the common ACPI/GPIO decode with ICH6 */ ich6_lpc_acpi_gpio(dev); @@ -648,7 +648,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, qui * VIA ACPI: One IO region pointed to by longword at * 0x48 or 0x20 (256 bytes of ACPI registers) */ -static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev) +static void quirk_vt82c586_acpi(struct pci_dev *dev) { u32 region; @@ -666,7 +666,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt * 0x70 (128 bytes of hardware monitoring register) * 0x90 (16 bytes of SMB registers) */ -static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev) +static void quirk_vt82c686_acpi(struct pci_dev *dev) { u16 hm; u32 smb; @@ -688,7 +688,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt * 0x88 (128 bytes of power management registers) * 0xd0 (16 bytes of SMB registers) */ -static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) +static void quirk_vt8235_acpi(struct pci_dev *dev) { u16 pm, smb; @@ -706,7 +706,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235 * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: * Disable fast back-to-back on the secondary bus segment */ -static void __devinit quirk_xio2000a(struct pci_dev *dev) +static void quirk_xio2000a(struct pci_dev *dev) { struct pci_dev *pdev; u16 command; @@ -780,7 +780,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk * noapic specified. For the moment we assume it's the erratum. We may be wrong * of course. However the advice is demonstrably good even if so.. */ -static void __devinit quirk_amd_ioapic(struct pci_dev *dev) +static void quirk_amd_ioapic(struct pci_dev *dev) { if (dev->revision >= 0x02) { dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); @@ -789,7 +789,7 @@ static void __devinit quirk_amd_ioapic(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); -static void __devinit quirk_ioapic_rmw(struct pci_dev *dev) +static void quirk_ioapic_rmw(struct pci_dev *dev) { if (dev->devfn == 0 && dev->bus->number == 0) sis_apic_bug = 1; @@ -801,7 +801,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw); * Some settings of MMRBC can lead to data corruption so block changes. * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide */ -static void __devinit quirk_amd_8131_mmrbc(struct pci_dev *dev) +static void quirk_amd_8131_mmrbc(struct pci_dev *dev) { if (dev->subordinate && dev->revision <= 0x12) { dev_info(&dev->dev, "AMD8131 rev %x detected; " @@ -819,7 +819,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_ * value of the ACPI SCI interrupt is only done for convenience. * -jgarzik */ -static void __devinit quirk_via_acpi(struct pci_dev *d) +static void quirk_via_acpi(struct pci_dev *d) { /* * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 @@ -926,7 +926,7 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); * We need to switch it off to be able to recognize the real * type of the chip. */ -static void __devinit quirk_vt82c598_id(struct pci_dev *dev) +static void quirk_vt82c598_id(struct pci_dev *dev) { pci_write_config_byte(dev, 0xfc, 0); pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); @@ -978,7 +978,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C * assigned to it. We force a larger allocation to ensure that * nothing gets put too close to it. */ -static void __devinit quirk_dunord ( struct pci_dev * dev ) +static void quirk_dunord(struct pci_dev *dev) { struct resource *r = &dev->resource [1]; r->start = 0; @@ -992,7 +992,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 * instead of 0x01. */ -static void __devinit quirk_transparent_bridge(struct pci_dev *dev) +static void quirk_transparent_bridge(struct pci_dev *dev) { dev->transparent = 1; } @@ -1066,7 +1066,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA /* * Serverworks CSB5 IDE does not fully support native mode */ -static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev) +static void quirk_svwks_csb5ide(struct pci_dev *pdev) { u8 prog; pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); @@ -1082,7 +1082,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB /* * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same */ -static void __devinit quirk_ide_samemode(struct pci_dev *pdev) +static void quirk_ide_samemode(struct pci_dev *pdev) { u8 prog; @@ -1101,7 +1101,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, qui * Some ATA devices break if put into D3 */ -static void __devinit quirk_no_ata_d3(struct pci_dev *pdev) +static void quirk_no_ata_d3(struct pci_dev *pdev) { pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; } @@ -1121,7 +1121,7 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, /* This was originally an Alpha specific thing, but it really fits here. * The i82375 PCI/EISA bridge appears as non-classified. Fix that. */ -static void __devinit quirk_eisa_bridge(struct pci_dev *dev) +static void quirk_eisa_bridge(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_EISA << 8; } @@ -1155,7 +1155,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_e */ static int asus_hides_smbus; -static void __devinit asus_hides_smbus_hostbridge(struct pci_dev *dev) +static void asus_hides_smbus_hostbridge(struct pci_dev *dev) { if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) @@ -1538,7 +1538,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB3 #endif #ifdef CONFIG_X86_IO_APIC -static void __devinit quirk_alder_ioapic(struct pci_dev *pdev) +static void quirk_alder_ioapic(struct pci_dev *pdev) { int i; @@ -1561,7 +1561,7 @@ static void __devinit quirk_alder_ioapic(struct pci_dev *pdev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); #endif -static void __devinit quirk_pcie_mch(struct pci_dev *pdev) +static void quirk_pcie_mch(struct pci_dev *pdev) { pci_msi_off(pdev); pdev->no_msi = 1; @@ -1575,7 +1575,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quir * It's possible for the MSI to get corrupted if shpc and acpi * are used together on certain PXH-based systems. */ -static void __devinit quirk_pcie_pxh(struct pci_dev *dev) +static void quirk_pcie_pxh(struct pci_dev *dev) { pci_msi_off(dev); dev->no_msi = 1; @@ -1777,7 +1777,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, qui * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. * Re-allocate the region if needed... */ -static void __devinit quirk_tc86c001_ide(struct pci_dev *dev) +static void quirk_tc86c001_ide(struct pci_dev *dev) { struct resource *r = &dev->resource[0]; @@ -1790,7 +1790,46 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, quirk_tc86c001_ide); -static void __devinit quirk_netmos(struct pci_dev *dev) +/* + * PLX PCI 9050 PCI Target bridge controller has an errata that prevents the + * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o) + * being read correctly if bit 7 of the base address is set. + * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128). + * Re-allocate the regions to a 256-byte boundary if necessary. + */ +static void quirk_plx_pci9050(struct pci_dev *dev) +{ + unsigned int bar; + + /* Fixed in revision 2 (PCI 9052). */ + if (dev->revision >= 2) + return; + for (bar = 0; bar <= 1; bar++) + if (pci_resource_len(dev, bar) == 0x80 && + (pci_resource_start(dev, bar) & 0x80)) { + struct resource *r = &dev->resource[bar]; + dev_info(&dev->dev, + "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n", + bar); + r->start = 0; + r->end = 0xff; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + quirk_plx_pci9050); +/* + * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others) + * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b, + * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c, + * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b. + * + * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq" + * driver. + */ +DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050); +DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050); + +static void quirk_netmos(struct pci_dev *dev) { unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; unsigned int num_serial = dev->subsystem_device & 0xf; @@ -1828,7 +1867,7 @@ static void __devinit quirk_netmos(struct pci_dev *dev) DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos); -static void __devinit quirk_e100_interrupt(struct pci_dev *dev) +static void quirk_e100_interrupt(struct pci_dev *dev) { u16 command, pmcsr; u8 __iomem *csr; @@ -1901,7 +1940,7 @@ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, * The 82575 and 82598 may experience data corruption issues when transitioning * out of L0S. To prevent this we need to disable L0S on the pci-e link */ -static void __devinit quirk_disable_aspm_l0s(struct pci_dev *dev) +static void quirk_disable_aspm_l0s(struct pci_dev *dev) { dev_info(&dev->dev, "Disabling L0s\n"); pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); @@ -1921,7 +1960,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); -static void __devinit fixup_rev1_53c810(struct pci_dev* dev) +static void fixup_rev1_53c810(struct pci_dev *dev) { /* rev 1 ncr53c810 chips don't set the class at all which means * they don't get their resources remapped. Fix that here. @@ -1935,7 +1974,7 @@ static void __devinit fixup_rev1_53c810(struct pci_dev* dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); /* Enable 1k I/O space granularity on the Intel P64H2 */ -static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev) +static void quirk_p64h2_1k_io(struct pci_dev *dev) { u16 en1k; @@ -1968,7 +2007,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, quirk_nvidia_ck804_pcie_aer_ext_cap); -static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) +static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) { /* * Disable PCI Bus Parking and PCI Master read caching on CX700 @@ -2031,7 +2070,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_c * We believe that it is legal to read beyond the end tag and * therefore the solution is to limit the read/write length. */ -static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev) +static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev) { /* * Only disable the VPD capability for 5706, 5706S, 5708, @@ -2091,7 +2130,7 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, * the DRBs - this is where we expose device 6. * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm */ -static void __devinit quirk_unhide_mch_dev6(struct pci_dev *dev) +static void quirk_unhide_mch_dev6(struct pci_dev *dev) { u8 reg; @@ -2115,7 +2154,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, * supports link speed auto negotiation, but falsely sets * the link speed to 5GT/s. */ -static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev) +static void quirk_tile_plx_gen1(struct pci_dev *dev) { if (tile_plx_gen1) { pci_write_config_dword(dev, 0x98, 0x1); @@ -2132,7 +2171,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); * aware of it. Instead of setting the flag on all busses in the * machine, simply disable MSI globally. */ -static void __devinit quirk_disable_all_msi(struct pci_dev *dev) +static void quirk_disable_all_msi(struct pci_dev *dev) { pci_no_msi(); dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n"); @@ -2146,7 +2185,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disab DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi); /* Disable MSI on chipsets that are known to not support it */ -static void __devinit quirk_disable_msi(struct pci_dev *dev) +static void quirk_disable_msi(struct pci_dev *dev) { if (dev->subordinate) { dev_warn(&dev->dev, "MSI quirk detected; " @@ -2164,7 +2203,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi); * we use the possible vendor/device IDs of the host bridge for the * declared quirk, and search for the APC bridge by slot number. */ -static void __devinit quirk_amd_780_apc_msi(struct pci_dev *host_bridge) +static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge) { struct pci_dev *apc_bridge; @@ -2272,7 +2311,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, * for the MCP55 NIC. It is not yet determined whether the msi problem * also affects other devices. As for now, turn off msi for this device. */ -static void __devinit nvenet_msi_disable(struct pci_dev *dev) +static void nvenet_msi_disable(struct pci_dev *dev) { const char *board_name = dmi_get_system_info(DMI_BOARD_NAME); @@ -2298,7 +2337,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, * we have it set correctly. * Note this is an undocumented register. */ -static void __devinit nvbridge_check_legacy_irq_routing(struct pci_dev *dev) +static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev) { u32 cfg; @@ -2534,11 +2573,11 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_q DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); -static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev) +static void quirk_msi_intx_disable_bug(struct pci_dev *dev) { dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; } -static void __devinit quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) +static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) { struct pci_dev *p; @@ -2612,7 +2651,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083, * kernel fails to allocate resources when hotplug device is * inserted and PCI bus is rescanned. */ -static void __devinit quirk_hotplug_bridge(struct pci_dev *dev) +static void quirk_hotplug_bridge(struct pci_dev *dev) { dev->is_hotplug_bridge = 1; } @@ -2752,7 +2791,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); #endif -static void __devinit fixup_ti816x_class(struct pci_dev* dev) +static void fixup_ti816x_class(struct pci_dev *dev) { /* TI 816x devices do not have class code set when in PCIe boot mode */ dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n"); @@ -2764,7 +2803,7 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800, /* Some PCIe devices do not work reliably with the claimed maximum * payload size supported. */ -static void __devinit fixup_mpss_256(struct pci_dev *dev) +static void fixup_mpss_256(struct pci_dev *dev) { dev->pcie_mpss = 1; /* 256 bytes */ } @@ -2782,7 +2821,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, * coalescing must be disabled. Unfortunately, it cannot be re-enabled because * it is possible to hotplug a device with MPS of 256B. */ -static void __devinit quirk_intel_mc_errata(struct pci_dev *dev) +static void quirk_intel_mc_errata(struct pci_dev *dev) { int err; u16 rcc; @@ -2888,7 +2927,7 @@ static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, * This resolves crashes often seen on monitor unplug. */ #define I915_DEIER_REG 0x4400c -static void __devinit disable_igfx_irq(struct pci_dev *dev) +static void disable_igfx_irq(struct pci_dev *dev) { void __iomem *regs = pci_iomap(dev, 0, 0); if (regs == NULL) { @@ -2914,7 +2953,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); * PCI_COMMAND_INTX_DISABLE works though they actually do not properly * support this feature. */ -static void __devinit quirk_broken_intx_masking(struct pci_dev *dev) +static void quirk_broken_intx_masking(struct pci_dev *dev) { dev->broken_intx_masking = 1; } diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index 513972f3ed1..7c0fd9252e6 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -111,3 +111,39 @@ void pci_stop_and_remove_bus_device(struct pci_dev *dev) pci_remove_bus_device(dev); } EXPORT_SYMBOL(pci_stop_and_remove_bus_device); + +void pci_stop_root_bus(struct pci_bus *bus) +{ + struct pci_dev *child, *tmp; + struct pci_host_bridge *host_bridge; + + if (!pci_is_root_bus(bus)) + return; + + host_bridge = to_pci_host_bridge(bus->bridge); + list_for_each_entry_safe_reverse(child, tmp, + &bus->devices, bus_list) + pci_stop_bus_device(child); + + /* stop the host bridge */ + device_del(&host_bridge->dev); +} + +void pci_remove_root_bus(struct pci_bus *bus) +{ + struct pci_dev *child, *tmp; + struct pci_host_bridge *host_bridge; + + if (!pci_is_root_bus(bus)) + return; + + host_bridge = to_pci_host_bridge(bus->bridge); + list_for_each_entry_safe(child, tmp, + &bus->devices, bus_list) + pci_remove_bus_device(child); + pci_remove_bus(bus); + host_bridge->bus = NULL; + + /* remove the host bridge */ + put_device(&host_bridge->dev); +} diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index 0b3037ab8b9..ab886b7ee32 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -118,11 +118,17 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) void __iomem *rom; /* + * Some devices may provide ROMs via a source other than the BAR + */ + if (pdev->rom && pdev->romlen) { + *size = pdev->romlen; + return phys_to_virt(pdev->rom); + /* * IORESOURCE_ROM_SHADOW set on x86, x86_64 and IA64 supports legacy * memory map if the VGA enable bit of the Bridge Control register is * set for embedded VGA. */ - if (res->flags & IORESOURCE_ROM_SHADOW) { + } else if (res->flags & IORESOURCE_ROM_SHADOW) { /* primary video rom always starts here */ start = (loff_t)0xC0000; *size = 0x20000; /* cover C000:0 through E000:0 */ @@ -181,7 +187,8 @@ void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom) if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY)) return; - iounmap(rom); + if (!pdev->rom || !pdev->romlen) + iounmap(rom); /* Disable again before continuing, leave enabled if pci=rom */ if (!(res->flags & (IORESOURCE_ROM_ENABLE | IORESOURCE_ROM_SHADOW))) diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 1e808ca338f..6d3591d57ea 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1550,25 +1550,12 @@ enable_all: } EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources); -#ifdef CONFIG_HOTPLUG -/** - * pci_rescan_bus - scan a PCI bus for devices. - * @bus: PCI bus to scan - * - * Scan a PCI bus and child buses for new devices, adds them, - * and enables them. - * - * Returns the max number of subordinate bus discovered. - */ -unsigned int __ref pci_rescan_bus(struct pci_bus *bus) +void pci_assign_unassigned_bus_resources(struct pci_bus *bus) { - unsigned int max; struct pci_dev *dev; LIST_HEAD(add_list); /* list of resources that want additional resources */ - max = pci_scan_child_bus(bus); - down_read(&pci_bus_sem); list_for_each_entry(dev, &bus->devices, bus_list) if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || @@ -1579,11 +1566,4 @@ unsigned int __ref pci_rescan_bus(struct pci_bus *bus) up_read(&pci_bus_sem); __pci_bus_assign_resources(bus, &add_list, NULL); BUG_ON(!list_empty(&add_list)); - - pci_enable_bridges(bus); - pci_bus_add_devices(bus); - - return max; } -EXPORT_SYMBOL_GPL(pci_rescan_bus); -#endif diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c index 0aab85a5155..966abc6054d 100644 --- a/drivers/pci/xen-pcifront.c +++ b/drivers/pci/xen-pcifront.c @@ -412,7 +412,7 @@ static int pcifront_claim_resource(struct pci_dev *dev, void *data) return 0; } -static int __devinit pcifront_scan_bus(struct pcifront_device *pdev, +static int pcifront_scan_bus(struct pcifront_device *pdev, unsigned int domain, unsigned int bus, struct pci_bus *b) { @@ -441,7 +441,7 @@ static int __devinit pcifront_scan_bus(struct pcifront_device *pdev, return 0; } -static int __devinit pcifront_scan_root(struct pcifront_device *pdev, +static int pcifront_scan_root(struct pcifront_device *pdev, unsigned int domain, unsigned int bus) { struct pci_bus *b; @@ -503,7 +503,7 @@ err_out: return err; } -static int __devinit pcifront_rescan_root(struct pcifront_device *pdev, +static int pcifront_rescan_root(struct pcifront_device *pdev, unsigned int domain, unsigned int bus) { int err; @@ -834,7 +834,7 @@ out: return err; } -static int __devinit pcifront_try_connect(struct pcifront_device *pdev) +static int pcifront_try_connect(struct pcifront_device *pdev) { int err = -EFAULT; int i, num_roots, len; @@ -924,7 +924,7 @@ out: return err; } -static int __devinit pcifront_attach_devices(struct pcifront_device *pdev) +static int pcifront_attach_devices(struct pcifront_device *pdev) { int err = -EFAULT; int i, num_roots, len; @@ -1068,13 +1068,16 @@ static void __init_refok pcifront_backend_changed(struct xenbus_device *xdev, case XenbusStateInitialising: case XenbusStateInitWait: case XenbusStateInitialised: - case XenbusStateClosed: break; case XenbusStateConnected: pcifront_try_connect(pdev); break; + case XenbusStateClosed: + if (xdev->state == XenbusStateClosed) + break; + /* Missed the backend's CLOSING state -- fallthrough */ case XenbusStateClosing: dev_warn(&xdev->dev, "backend going away!\n"); pcifront_try_disconnect(pdev); |