4 files changed, 66 insertions, 5 deletions

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 4d762fc4878..c27e782e6df 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -17,6 +17,31 @@ config PCI_MSI
 
 	   If you don't know what to do here, say N.
 
+config PCI_MULTITHREAD_PROBE
+	bool "PCI Multi-threaded probe (EXPERIMENTAL)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  Say Y here if you want the PCI core to spawn a new thread for
+	  every PCI device that is probed.  This can cause a huge
+	  speedup in boot times on multiprocessor machines, and even a
+	  smaller speedup on single processor machines.
+
+	  But it can also cause lots of bad things to happen.  A number
+	  of PCI drivers can not properly handle running in this way,
+	  some will just not work properly at all, while others might
+	  decide to blow up power supplies with a huge load all at once,
+	  so use this option at your own risk.
+
+	  It is very unwise to use this option if you are not using a
+	  boot process that can handle devices being created in any
+	  order.  A program that can create persistant block and network
+	  device names (like udev) is a good idea if you wish to use
+	  this option.
+
+	  Again, use this option at your own risk, you have been warned!
+
+	  When in doubt, say N.
+
 config PCI_DEBUG
 	bool "PCI Debugging"
 	depends on PCI && DEBUG_KERNEL
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index 317457dd401..d0a07d9ab30 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -487,9 +487,7 @@ static void __exit ibm_acpiphp_exit(void)
 	if (ACPI_FAILURE(status))
 		err("%s: Notification handler removal failed\n", __FUNCTION__);
 	/* remove the /sys entries */
-	if (sysfs_remove_bin_file(sysdir, &ibm_apci_table_attr))
-		err("%s: removal of sysfs file apci_table failed\n",
-				__FUNCTION__);
+	sysfs_remove_bin_file(sysdir, &ibm_apci_table_attr);
 }
 
 module_init(ibm_acpiphp_init);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 474e9cd0e9e..d8ace1f90dd 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -17,6 +17,16 @@
  *  Registration of PCI drivers and handling of hot-pluggable devices.
  */
 
+/* multithreaded probe logic */
+static int pci_multithread_probe =
+#ifdef CONFIG_PCI_MULTITHREAD_PROBE
+	1;
+#else
+	0;
+#endif
+__module_param_call("", pci_multithread_probe, param_set_bool, param_get_bool, &pci_multithread_probe, 0644);
+
+
 /*
  * Dynamic device IDs are disabled for !CONFIG_HOTPLUG
  */
@@ -279,6 +289,18 @@ static int pci_device_suspend(struct device * dev, pm_message_t state)
 	return i;
 }
 
+static int pci_device_suspend_late(struct device * dev, pm_message_t state)
+{
+	struct pci_dev * pci_dev = to_pci_dev(dev);
+	struct pci_driver * drv = pci_dev->driver;
+	int i = 0;
+
+	if (drv && drv->suspend_late) {
+		i = drv->suspend_late(pci_dev, state);
+		suspend_report_result(drv->suspend_late, i);
+	}
+	return i;
+}
 
 /*
  * Default resume method for devices that have no driver provided resume,
@@ -313,6 +335,17 @@ static int pci_device_resume(struct device * dev)
 	return error;
 }
 
+static int pci_device_resume_early(struct device * dev)
+{
+	int error = 0;
+	struct pci_dev * pci_dev = to_pci_dev(dev);
+	struct pci_driver * drv = pci_dev->driver;
+
+	if (drv && drv->resume_early)
+		error = drv->resume_early(pci_dev);
+	return error;
+}
+
 static void pci_device_shutdown(struct device *dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -385,6 +418,7 @@ int __pci_register_driver(struct pci_driver *drv, struct module *owner)
 	drv->driver.bus = &pci_bus_type;
 	drv->driver.owner = owner;
 	drv->driver.kobj.ktype = &pci_driver_kobj_type;
+	drv->driver.multithread_probe = pci_multithread_probe;
 
 	spin_lock_init(&drv->dynids.lock);
 	INIT_LIST_HEAD(&drv->dynids.list);
@@ -509,8 +543,10 @@ struct bus_type pci_bus_type = {
 	.probe		= pci_device_probe,
 	.remove		= pci_device_remove,
 	.suspend	= pci_device_suspend,
-	.shutdown	= pci_device_shutdown,
+	.suspend_late	= pci_device_suspend_late,
+	.resume_early	= pci_device_resume_early,
 	.resume		= pci_device_resume,
+	.shutdown	= pci_device_shutdown,
 	.dev_attrs	= pci_dev_attrs,
 };
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 684deb6b03a..590f4e6f505 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -432,10 +432,12 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
 	case PM_EVENT_ON:
 		return PCI_D0;
 	case PM_EVENT_FREEZE:
+	case PM_EVENT_PRETHAW:
+		/* REVISIT both freeze and pre-thaw "should" use D0 */
 	case PM_EVENT_SUSPEND:
 		return PCI_D3hot;
 	default:
-		printk("They asked me for state %d\n", state.event);
+		printk("Unrecognized suspend event %d\n", state.event);
 		BUG();
 	}
 	return PCI_D0;