diff options
Diffstat (limited to 'drivers/pcmcia/au1000_pb1x00.c')
| -rw-r--r-- | drivers/pcmcia/au1000_pb1x00.c | 119 |
1 files changed, 1 insertions, 118 deletions
diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c index b1984ed72d1..5a979cb8f3e 100644 --- a/drivers/pcmcia/au1000_pb1x00.c +++ b/drivers/pcmcia/au1000_pb1x00.c @@ -1,6 +1,6 @@ /* * - * Alchemy Semi Pb1x00 boards specific pcmcia routines. + * Alchemy Semi Pb1000 boards specific pcmcia routines. * * Copyright 2002 MontaVista Software Inc. * Author: MontaVista Software, Inc. @@ -46,20 +46,11 @@ #define debug(fmt, arg...) do { } while (0) -#ifdef CONFIG_MIPS_PB1000 #include <asm/pb1000.h> #define PCMCIA_IRQ AU1000_GPIO_15 -#elif defined (CONFIG_MIPS_PB1500) -#include <asm/pb1500.h> -#define PCMCIA_IRQ AU1500_GPIO_203 -#elif defined (CONFIG_MIPS_PB1100) -#include <asm/pb1100.h> -#define PCMCIA_IRQ AU1000_GPIO_11 -#endif static int pb1x00_pcmcia_init(struct pcmcia_init *init) { -#ifdef CONFIG_MIPS_PB1000 u16 pcr; pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST; @@ -74,21 +65,10 @@ static int pb1x00_pcmcia_init(struct pcmcia_init *init) au_sync_delay(20); return PCMCIA_NUM_SOCKS; - -#else /* fixme -- take care of the Pb1500 at some point */ - - u16 pcr; - pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */ - pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN); - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(500); - return PCMCIA_NUM_SOCKS; -#endif } static int pb1x00_pcmcia_shutdown(void) { -#ifdef CONFIG_MIPS_PB1000 u16 pcr; pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST; pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0); @@ -96,14 +76,6 @@ static int pb1x00_pcmcia_shutdown(void) au_writel(pcr, PB1000_PCR); au_sync_delay(20); return 0; -#else - u16 pcr; - pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */ - pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN); - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(2); - return 0; -#endif } static int @@ -112,21 +84,11 @@ pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) u32 inserted0, inserted1; u16 vs0, vs1; -#ifdef CONFIG_MIPS_PB1000 vs0 = vs1 = (u16)au_readl(PB1000_ACR1); inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2)); inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2)); vs0 = (vs0 >> 4) & 0x3; vs1 = (vs1 >> 12) & 0x3; -#else - vs0 = (au_readw(BOARD_STATUS_REG) >> 4) & 0x3; -#ifdef CONFIG_MIPS_PB1500 - inserted0 = !((au_readl(GPIO2_PINSTATE) >> 1) & 0x1); /* gpio 201 */ -#else /* Pb1100 */ - inserted0 = !((au_readl(SYS_PINSTATERD) >> 9) & 0x1); /* gpio 9 */ -#endif - inserted1 = 0; -#endif state->ready = 0; state->vs_Xv = 0; @@ -203,7 +165,6 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure) if(configure->sock > PCMCIA_MAX_SOCK) return -1; -#ifdef CONFIG_MIPS_PB1000 pcr = au_readl(PB1000_PCR); if (configure->sock == 0) { @@ -323,84 +284,6 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure) au_writel(pcr, PB1000_PCR); au_sync_delay(300); -#else - - pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; - - debug("Vcc %dV Vpp %dV, pcr %x, reset %d\n", - configure->vcc, configure->vpp, pcr, configure->reset); - - - switch(configure->vcc){ - case 0: /* Vcc 0 */ - pcr |= SET_VCC_VPP(0,0); - break; - case 50: /* Vcc 5V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(2,0); - break; - case 50: - pcr |= SET_VCC_VPP(2,1); - break; - case 12: - pcr |= SET_VCC_VPP(2,2); - break; - case 33: - default: - pcr |= SET_VCC_VPP(0,0); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - configure->vcc, - configure->vpp); - break; - } - break; - case 33: /* Vcc 3.3V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(1,0); - break; - case 12: - pcr |= SET_VCC_VPP(1,2); - break; - case 33: - pcr |= SET_VCC_VPP(1,1); - break; - case 50: - default: - pcr |= SET_VCC_VPP(0,0); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - configure->vcc, - configure->vpp); - break; - } - break; - default: /* what's this ? */ - pcr |= SET_VCC_VPP(0,0); - printk(KERN_ERR "%s: bad Vcc %d\n", - __func__, configure->vcc); - break; - } - - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(300); - - if (!configure->reset) { - pcr |= PC_DRV_EN; - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(100); - pcr |= PC_DEASSERT_RST; - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(100); - } - else { - pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN); - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(100); - } -#endif return 0; } |