diff options
Diffstat (limited to 'drivers/pcmcia/db1xxx_ss.c')
| -rw-r--r-- | drivers/pcmcia/db1xxx_ss.c | 59 |
1 files changed, 8 insertions, 51 deletions
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c index 3889cf07d6c..0f4cc3f0002 100644 --- a/drivers/pcmcia/db1xxx_ss.c +++ b/drivers/pcmcia/db1xxx_ss.c @@ -26,6 +26,7 @@ #include <linux/pm.h> #include <linux/platform_device.h> #include <linux/resource.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <pcmcia/cs_types.h> @@ -42,7 +43,6 @@ struct db1x_pcmcia_sock { int nr; /* socket number */ void *virt_io; - /* the "pseudo" addresses of the PCMCIA space. */ phys_addr_t phys_io; phys_addr_t phys_attr; phys_addr_t phys_mem; @@ -146,7 +146,6 @@ static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data) static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) { int ret; - unsigned long flags; if (sock->stschg_irq != -1) { ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq, @@ -162,8 +161,6 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) * active one disabled. */ if (sock->board_type == BOARD_TYPE_DB1200) { - local_irq_save(flags); - ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq, IRQF_DISABLED, "pcmcia_insert", sock); if (ret) @@ -173,17 +170,14 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) IRQF_DISABLED, "pcmcia_eject", sock); if (ret) { free_irq(sock->insert_irq, sock); - local_irq_restore(flags); goto out1; } - /* disable the currently active one */ + /* enable the currently silent one */ if (db1200_card_inserted(sock)) - disable_irq_nosync(sock->insert_irq); + enable_irq(sock->eject_irq); else - disable_irq_nosync(sock->eject_irq); - - local_irq_restore(flags); + enable_irq(sock->insert_irq); } else { /* all other (older) Db1x00 boards use a GPIO to show * card detection status: use both-edge triggers. @@ -437,7 +431,7 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev) * This includes IRQs for Carddetection/ejection, the card * itself and optional status change detection. * Also, the memory areas covered by a socket. For these - * we require the 32bit "pseudo" addresses (see the au1000.h + * we require the real 36bit addresses (see the au1000.h * header for more information). */ @@ -459,11 +453,7 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev) ret = -ENODEV; - /* - * pseudo-attr: The 32bit address of the PCMCIA attribute space - * for this socket (usually the 36bit address shifted 4 to the - * right). - */ + /* 36bit PCMCIA Attribute area address */ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr"); if (!r) { printk(KERN_ERR "pcmcia%d has no 'pseudo-attr' resource!\n", @@ -472,10 +462,7 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev) } sock->phys_attr = r->start; - /* - * pseudo-mem: The 32bit address of the PCMCIA memory space for - * this socket (usually the 36bit address shifted 4 to the right) - */ + /* 36bit PCMCIA Memory area address */ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem"); if (!r) { printk(KERN_ERR "pcmcia%d has no 'pseudo-mem' resource!\n", @@ -484,10 +471,7 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev) } sock->phys_mem = r->start; - /* - * pseudo-io: The 32bit address of the PCMCIA IO space for this - * socket (usually the 36bit address shifted 4 to the right). - */ + /* 36bit PCMCIA IO area address */ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io"); if (!r) { printk(KERN_ERR "pcmcia%d has no 'pseudo-io' resource!\n", @@ -569,37 +553,10 @@ static int __devexit db1x_pcmcia_socket_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int db1x_pcmcia_suspend(struct device *dev) -{ - return pcmcia_socket_dev_suspend(dev); -} - -static int db1x_pcmcia_resume(struct device *dev) -{ - return pcmcia_socket_dev_resume(dev); -} - -static struct dev_pm_ops db1x_pcmcia_pmops = { - .resume = db1x_pcmcia_resume, - .suspend = db1x_pcmcia_suspend, - .thaw = db1x_pcmcia_resume, - .freeze = db1x_pcmcia_suspend, -}; - -#define DB1XXX_SS_PMOPS &db1x_pcmcia_pmops - -#else - -#define DB1XXX_SS_PMOPS NULL - -#endif - static struct platform_driver db1x_pcmcia_socket_driver = { .driver = { .name = "db1xxx_pcmcia", .owner = THIS_MODULE, - .pm = DB1XXX_SS_PMOPS }, .probe = db1x_pcmcia_socket_probe, .remove = __devexit_p(db1x_pcmcia_socket_remove), |