summaryrefslogtreecommitdiffstats
path: root/drivers/pcmcia/sa1111_badge4.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pcmcia/sa1111_badge4.c')
-rw-r--r--drivers/pcmcia/sa1111_badge4.c166
1 files changed, 166 insertions, 0 deletions
diff --git a/drivers/pcmcia/sa1111_badge4.c b/drivers/pcmcia/sa1111_badge4.c
new file mode 100644
index 00000000000..4d206f4dd67
--- /dev/null
+++ b/drivers/pcmcia/sa1111_badge4.c
@@ -0,0 +1,166 @@
+/*
+ * linux/drivers/pcmcia/sa1100_badge4.c
+ *
+ * BadgePAD 4 PCMCIA specific routines
+ *
+ * Christopher Hoover <ch@hpl.hp.com>
+ *
+ * Copyright (C) 2002 Hewlett-Packard Company
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <mach/badge4.h>
+#include <asm/hardware/sa1111.h>
+
+#include "sa1111_generic.h"
+
+/*
+ * BadgePAD 4 Details
+ *
+ * PCM Vcc:
+ *
+ * PCM Vcc on BadgePAD 4 can be jumpered for 3v3 (short pins 1 and 3
+ * on JP6) or 5v0 (short pins 3 and 5 on JP6).
+ *
+ * PCM Vpp:
+ *
+ * PCM Vpp on BadgePAD 4 can be jumpered for 12v0 (short pins 4 and 6
+ * on JP6) or tied to PCM Vcc (short pins 2 and 4 on JP6). N.B.,
+ * 12v0 operation requires that the power supply actually supply 12v0
+ * via pin 7 of JP7.
+ *
+ * CF Vcc:
+ *
+ * CF Vcc on BadgePAD 4 can be jumpered either for 3v3 (short pins 1
+ * and 2 on JP10) or 5v0 (short pins 2 and 3 on JP10).
+ *
+ * Unfortunately there's no way programmatically to determine how a
+ * given board is jumpered. This code assumes a default jumpering
+ * as described below.
+ *
+ * If the defaults aren't correct, you may override them with a pcmv
+ * setup argument: pcmv=<pcm vcc>,<pcm vpp>,<cf vcc>. The units are
+ * tenths of volts; e.g. pcmv=33,120,50 indicates 3v3 PCM Vcc, 12v0
+ * PCM Vpp, and 5v0 CF Vcc.
+ *
+ */
+
+static int badge4_pcmvcc = 50; /* pins 3 and 5 jumpered on JP6 */
+static int badge4_pcmvpp = 50; /* pins 2 and 4 jumpered on JP6 */
+static int badge4_cfvcc = 33; /* pins 1 and 2 jumpered on JP10 */
+
+static void complain_about_jumpering(const char *whom,
+ const char *supply,
+ int given, int wanted)
+{
+ printk(KERN_ERR
+ "%s: %s %d.%dV wanted but board is jumpered for %s %d.%dV operation"
+ "; re-jumper the board and/or use pcmv=xx,xx,xx\n",
+ whom, supply,
+ wanted / 10, wanted % 10,
+ supply,
+ given / 10, given % 10);
+}
+
+static int
+badge4_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
+{
+ int ret;
+
+ switch (skt->nr) {
+ case 0:
+ if ((state->Vcc != 0) &&
+ (state->Vcc != badge4_pcmvcc)) {
+ complain_about_jumpering(__func__, "pcmvcc",
+ badge4_pcmvcc, state->Vcc);
+ // Apply power regardless of the jumpering.
+ // return -1;
+ }
+ if ((state->Vpp != 0) &&
+ (state->Vpp != badge4_pcmvpp)) {
+ complain_about_jumpering(__func__, "pcmvpp",
+ badge4_pcmvpp, state->Vpp);
+ return -1;
+ }
+ break;
+
+ case 1:
+ if ((state->Vcc != 0) &&
+ (state->Vcc != badge4_cfvcc)) {
+ complain_about_jumpering(__func__, "cfvcc",
+ badge4_cfvcc, state->Vcc);
+ return -1;
+ }
+ break;
+
+ default:
+ return -1;
+ }
+
+ ret = sa1111_pcmcia_configure_socket(skt, state);
+ if (ret == 0) {
+ unsigned long flags;
+ int need5V;
+
+ local_irq_save(flags);
+
+ need5V = ((state->Vcc == 50) || (state->Vpp == 50));
+
+ badge4_set_5V(BADGE4_5V_PCMCIA_SOCK(skt->nr), need5V);
+
+ local_irq_restore(flags);
+ }
+
+ return ret;
+}
+
+static struct pcmcia_low_level badge4_pcmcia_ops = {
+ .owner = THIS_MODULE,
+ .configure_socket = badge4_pcmcia_configure_socket,
+ .first = 0,
+ .nr = 2,
+};
+
+int pcmcia_badge4_init(struct device *dev)
+{
+ int ret = -ENODEV;
+
+ if (machine_is_badge4()) {
+ printk(KERN_INFO
+ "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
+ __func__,
+ badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
+
+ sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops);
+ ret = sa1111_pcmcia_add(dev, &badge4_pcmcia_ops,
+ sa11xx_drv_pcmcia_add_one);
+ }
+
+ return ret;
+}
+
+static int __init pcmv_setup(char *s)
+{
+ int v[4];
+
+ s = get_options(s, ARRAY_SIZE(v), v);
+
+ if (v[0] >= 1) badge4_pcmvcc = v[1];
+ if (v[0] >= 2) badge4_pcmvpp = v[2];
+ if (v[0] >= 3) badge4_cfvcc = v[3];
+
+ return 1;
+}
+
+__setup("pcmv=", pcmv_setup);