diff options
Diffstat (limited to 'drivers/pcmcia/xxs1500_ss.c')
| -rw-r--r-- | drivers/pcmcia/xxs1500_ss.c | 27 |
1 files changed, 10 insertions, 17 deletions
diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c index 4e36930b51c..61560cd6e28 100644 --- a/drivers/pcmcia/xxs1500_ss.c +++ b/drivers/pcmcia/xxs1500_ss.c @@ -56,10 +56,9 @@ struct xxs1500_pcmcia_sock { struct pcmcia_socket socket; void *virt_io; - /* the "pseudo" addresses of the PCMCIA space. */ - unsigned long phys_io; - unsigned long phys_attr; - unsigned long phys_mem; + phys_addr_t phys_io; + phys_addr_t phys_attr; + phys_addr_t phys_mem; /* previous flags for set_socket() */ unsigned int old_flags; @@ -211,7 +210,6 @@ static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev) { struct xxs1500_pcmcia_sock *sock; struct resource *r; - phys_t physio; int ret, irq; sock = kzalloc(sizeof(struct xxs1500_pcmcia_sock), GFP_KERNEL); @@ -225,9 +223,9 @@ static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev) * for this socket (usually the 36bit address shifted 4 to the * right). */ - r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-attr"); + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr"); if (!r) { - dev_err(&pdev->dev, "missing 'pseudo-attr' resource!\n"); + dev_err(&pdev->dev, "missing 'pcmcia-attr' resource!\n"); goto out0; } sock->phys_attr = r->start; @@ -236,9 +234,9 @@ static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev) * pseudo-mem: The 32bit address of the PCMCIA memory space for * this socket (usually the 36bit address shifted 4 to the right) */ - r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-mem"); + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem"); if (!r) { - dev_err(&pdev->dev, "missing 'pseudo-mem' resource!\n"); + dev_err(&pdev->dev, "missing 'pcmcia-mem' resource!\n"); goto out0; } sock->phys_mem = r->start; @@ -247,19 +245,14 @@ static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev) * pseudo-io: The 32bit address of the PCMCIA IO space for this * socket (usually the 36bit address shifted 4 to the right). */ - r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-io"); + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io"); if (!r) { - dev_err(&pdev->dev, "missing 'pseudo-io' resource!\n"); + dev_err(&pdev->dev, "missing 'pcmcia-io' resource!\n"); goto out0; } sock->phys_io = r->start; - /* for io must remap the full 36bit address (for reference see - * alchemy/common/setup.c::__fixup_bigphys_addr) - */ - physio = ((phys_t)sock->phys_io) << 4; - /* * PCMCIA client drivers use the inb/outb macros to access * the IO registers. Since mips_io_port_base is added @@ -268,7 +261,7 @@ static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev) * to access the I/O or MEM address directly, without * going through this "mips_io_port_base" mechanism. */ - sock->virt_io = (void *)(ioremap(physio, IO_MAP_SIZE) - + sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) - mips_io_port_base); if (!sock->virt_io) { |