diff options
Diffstat (limited to 'drivers/pcmcia/yenta_socket.c')
-rw-r--r-- | drivers/pcmcia/yenta_socket.c | 86 |
1 files changed, 47 insertions, 39 deletions
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 0ab1fb65cdc..3ecd7c99d8e 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -38,11 +38,7 @@ static int pwr_irqs_off; module_param(pwr_irqs_off, bool, 0644); MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!"); -#if 0 -#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args) -#else -#define debug(x,args...) -#endif +#define debug(x, s, args...) dev_dbg(&s->dev->dev, x, ##args) /* Don't ask.. */ #define to_cycles(ns) ((ns)/120) @@ -69,13 +65,13 @@ MODULE_PARM_DESC (override_bios, "yenta ignore bios resource allocation"); static inline u32 cb_readl(struct yenta_socket *socket, unsigned reg) { u32 val = readl(socket->base + reg); - debug("%p %04x %08x\n", socket, reg, val); + debug("%04x %08x\n", socket, reg, val); return val; } static inline void cb_writel(struct yenta_socket *socket, unsigned reg, u32 val) { - debug("%p %04x %08x\n", socket, reg, val); + debug("%04x %08x\n", socket, reg, val); writel(val, socket->base + reg); readl(socket->base + reg); /* avoid problems with PCI write posting */ } @@ -84,7 +80,7 @@ static inline u8 config_readb(struct yenta_socket *socket, unsigned offset) { u8 val; pci_read_config_byte(socket->dev, offset, &val); - debug("%p %04x %02x\n", socket, offset, val); + debug("%04x %02x\n", socket, offset, val); return val; } @@ -92,7 +88,7 @@ static inline u16 config_readw(struct yenta_socket *socket, unsigned offset) { u16 val; pci_read_config_word(socket->dev, offset, &val); - debug("%p %04x %04x\n", socket, offset, val); + debug("%04x %04x\n", socket, offset, val); return val; } @@ -100,32 +96,32 @@ static inline u32 config_readl(struct yenta_socket *socket, unsigned offset) { u32 val; pci_read_config_dword(socket->dev, offset, &val); - debug("%p %04x %08x\n", socket, offset, val); + debug("%04x %08x\n", socket, offset, val); return val; } static inline void config_writeb(struct yenta_socket *socket, unsigned offset, u8 val) { - debug("%p %04x %02x\n", socket, offset, val); + debug("%04x %02x\n", socket, offset, val); pci_write_config_byte(socket->dev, offset, val); } static inline void config_writew(struct yenta_socket *socket, unsigned offset, u16 val) { - debug("%p %04x %04x\n", socket, offset, val); + debug("%04x %04x\n", socket, offset, val); pci_write_config_word(socket->dev, offset, val); } static inline void config_writel(struct yenta_socket *socket, unsigned offset, u32 val) { - debug("%p %04x %08x\n", socket, offset, val); + debug("%04x %08x\n", socket, offset, val); pci_write_config_dword(socket->dev, offset, val); } static inline u8 exca_readb(struct yenta_socket *socket, unsigned reg) { u8 val = readb(socket->base + 0x800 + reg); - debug("%p %04x %02x\n", socket, reg, val); + debug("%04x %02x\n", socket, reg, val); return val; } @@ -134,20 +130,20 @@ static inline u8 exca_readw(struct yenta_socket *socket, unsigned reg) u16 val; val = readb(socket->base + 0x800 + reg); val |= readb(socket->base + 0x800 + reg + 1) << 8; - debug("%p %04x %04x\n", socket, reg, val); + debug("%04x %04x\n", socket, reg, val); return val; } static inline void exca_writeb(struct yenta_socket *socket, unsigned reg, u8 val) { - debug("%p %04x %02x\n", socket, reg, val); + debug("%04x %02x\n", socket, reg, val); writeb(val, socket->base + 0x800 + reg); readb(socket->base + 0x800 + reg); /* PCI write posting... */ } static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val) { - debug("%p %04x %04x\n", socket, reg, val); + debug("%04x %04x\n", socket, reg, val); writeb(val, socket->base + 0x800 + reg); writeb(val >> 8, socket->base + 0x800 + reg + 1); @@ -207,7 +203,7 @@ static int yenta_get_status(struct pcmcia_socket *sock, unsigned int *value) if (state & CB_CBCARD) { - val |= SS_CARDBUS; + val |= SS_CARDBUS; val |= (state & CB_CARDSTS) ? SS_STSCHG : 0; val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT; val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0; @@ -650,8 +646,10 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type root = pci_find_parent_resource(socket->dev, res); if (root && (request_resource(root, res) == 0)) return 0; - printk(KERN_INFO "yenta %s: Preassigned resource %d busy or not available, reconfiguring...\n", - pci_name(socket->dev), nr); + dev_printk(KERN_INFO, &socket->dev->dev, + "Preassigned resource %d busy or not available, " + "reconfiguring...\n", + nr); } if (type & IORESOURCE_IO) { @@ -674,8 +672,9 @@ static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type return 1; } - printk(KERN_INFO "yenta %s: no resource of type %x available, trying to continue...\n", - pci_name(socket->dev), type); + dev_printk(KERN_INFO, &socket->dev->dev, + "no resource of type %x available, trying to continue...\n", + type); res->start = res->end = res->flags = 0; return 0; } @@ -923,7 +922,8 @@ static int yenta_probe_cb_irq(struct yenta_socket *socket) socket->probe_status = 0; if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) { - printk(KERN_WARNING "Yenta: request_irq() in yenta_probe_cb_irq() failed!\n"); + dev_printk(KERN_WARNING, &socket->dev->dev, + "request_irq() in yenta_probe_cb_irq() failed!\n"); return -1; } @@ -960,8 +960,9 @@ static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_i else socket->socket.irq_mask = 0; - printk(KERN_INFO "Yenta: ISA IRQ mask 0x%04x, PCI irq %d\n", - socket->socket.irq_mask, socket->cb_irq); + dev_printk(KERN_INFO, &socket->dev->dev, + "ISA IRQ mask 0x%04x, PCI irq %d\n", + socket->socket.irq_mask, socket->cb_irq); } /* @@ -1051,8 +1052,9 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) /* Show that the wanted subordinate number is not possible: */ if (cardbus_bridge->subordinate > upper_limit) - printk(KERN_WARNING "Yenta: Upper limit for fixing this " - "bridge's parent bridge: #%02x\n", upper_limit); + dev_printk(KERN_WARNING, &cardbus_bridge->dev, + "Upper limit for fixing this " + "bridge's parent bridge: #%02x\n", upper_limit); /* If we have room to increase the bridge's subordinate number, */ if (bridge_to_fix->subordinate < upper_limit) { @@ -1061,10 +1063,11 @@ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) unsigned char subordinate_to_assign = min(cardbus_bridge->subordinate, upper_limit); - printk(KERN_INFO "Yenta: Raising subordinate bus# of parent " - "bus (#%02x) from #%02x to #%02x\n", - bridge_to_fix->number, - bridge_to_fix->subordinate, subordinate_to_assign); + dev_printk(KERN_INFO, &bridge_to_fix->dev, + "Raising subordinate bus# of parent " + "bus (#%02x) from #%02x to #%02x\n", + bridge_to_fix->number, + bridge_to_fix->subordinate, subordinate_to_assign); /* Save the new subordinate in the bus struct of the bridge */ bridge_to_fix->subordinate = subordinate_to_assign; @@ -1091,8 +1094,8 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i * Bail out if so. */ if (!dev->subordinate) { - printk(KERN_ERR "Yenta: no bus associated with %s! " - "(try 'pci=assign-busses')\n", pci_name(dev)); + dev_printk(KERN_ERR, &dev->dev, "no bus associated! " + "(try 'pci=assign-busses')\n"); return -ENODEV; } @@ -1127,7 +1130,7 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i goto disable; if (!pci_resource_start(dev, 0)) { - printk(KERN_ERR "No cardbus resource!\n"); + dev_printk(KERN_ERR, &dev->dev, "No cardbus resource!\n"); ret = -ENODEV; goto release; } @@ -1146,8 +1149,8 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i * report the subsystem vendor and device for help debugging * the irq stuff... */ - printk(KERN_INFO "Yenta: CardBus bridge found at %s [%04x:%04x]\n", - pci_name(dev), dev->subsystem_vendor, dev->subsystem_device); + dev_printk(KERN_INFO, &dev->dev, "CardBus bridge found [%04x:%04x]\n", + dev->subsystem_vendor, dev->subsystem_device); yenta_config_init(socket); @@ -1179,8 +1182,12 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i socket->poll_timer.data = (unsigned long)socket; socket->poll_timer.expires = jiffies + HZ; add_timer(&socket->poll_timer); - printk(KERN_INFO "Yenta: no PCI IRQ, CardBus support disabled for this socket.\n" - KERN_INFO "Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.\n"); + dev_printk(KERN_INFO, &dev->dev, + "no PCI IRQ, CardBus support disabled for this " + "socket.\n"); + dev_printk(KERN_INFO, &dev->dev, + "check your BIOS CardBus, BIOS IRQ or ACPI " + "settings.\n"); } else { socket->socket.features |= SS_CAP_CARDBUS; } @@ -1188,7 +1195,8 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i /* Figure out what the dang thing can do for the PCMCIA layer... */ yenta_interrogate(socket); yenta_get_socket_capabilities(socket, isa_interrupts); - printk(KERN_INFO "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE)); + dev_printk(KERN_INFO, &dev->dev, + "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE)); yenta_fixup_parent_bridge(dev->subordinate); |