1 files changed, 48 insertions, 40 deletions

diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 6fa1ed8f2b2..abe0e44c6e9 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1225,60 +1225,71 @@ static int __devinit yenta_probe (struct pci_dev *dev, const struct pci_device_i
 }
 
 #ifdef CONFIG_PM
-static int yenta_dev_suspend (struct pci_dev *dev, pm_message_t state)
+static int yenta_dev_suspend_noirq(struct device *dev)
 {
-	struct yenta_socket *socket = pci_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct yenta_socket *socket = pci_get_drvdata(pdev);
 	int ret;
 
-	ret = pcmcia_socket_dev_suspend(&dev->dev);
+	ret = pcmcia_socket_dev_suspend(dev);
 
-	if (socket) {
-		if (socket->type && socket->type->save_state)
-			socket->type->save_state(socket);
+	if (!socket)
+		return ret;
 
-		/* FIXME: pci_save_state needs to have a better interface */
-		pci_save_state(dev);
-		pci_read_config_dword(dev, 16*4, &socket->saved_state[0]);
-		pci_read_config_dword(dev, 17*4, &socket->saved_state[1]);
-		pci_disable_device(dev);
+	if (socket->type && socket->type->save_state)
+		socket->type->save_state(socket);
 
-		/*
-		 * Some laptops (IBM T22) do not like us putting the Cardbus
-		 * bridge into D3.  At a guess, some other laptop will
-		 * probably require this, so leave it commented out for now.
-		 */
-		/* pci_set_power_state(dev, 3); */
-	}
+	pci_save_state(pdev);
+	pci_read_config_dword(pdev, 16*4, &socket->saved_state[0]);
+	pci_read_config_dword(pdev, 17*4, &socket->saved_state[1]);
+	pci_disable_device(pdev);
+
+	/*
+	 * Some laptops (IBM T22) do not like us putting the Cardbus
+	 * bridge into D3.  At a guess, some other laptop will
+	 * probably require this, so leave it commented out for now.
+	 */
+	/* pci_set_power_state(dev, 3); */
 
 	return ret;
 }
 
-
-static int yenta_dev_resume (struct pci_dev *dev)
+static int yenta_dev_resume_noirq(struct device *dev)
 {
-	struct yenta_socket *socket = pci_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct yenta_socket *socket = pci_get_drvdata(pdev);
+	int ret;
 
-	if (socket) {
-		int rc;
+	if (!socket)
+		return 0;
 
-		pci_set_power_state(dev, 0);
-		/* FIXME: pci_restore_state needs to have a better interface */
-		pci_restore_state(dev);
-		pci_write_config_dword(dev, 16*4, socket->saved_state[0]);
-		pci_write_config_dword(dev, 17*4, socket->saved_state[1]);
+	pci_write_config_dword(pdev, 16*4, socket->saved_state[0]);
+	pci_write_config_dword(pdev, 17*4, socket->saved_state[1]);
 
-		rc = pci_enable_device(dev);
-		if (rc)
-			return rc;
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
 
-		pci_set_master(dev);
+	pci_set_master(pdev);
 
-		if (socket->type && socket->type->restore_state)
-			socket->type->restore_state(socket);
-	}
+	if (socket->type && socket->type->restore_state)
+		socket->type->restore_state(socket);
 
-	return pcmcia_socket_dev_resume(&dev->dev);
+	return pcmcia_socket_dev_resume(dev);
 }
+
+static struct dev_pm_ops yenta_pm_ops = {
+	.suspend_noirq = yenta_dev_suspend_noirq,
+	.resume_noirq = yenta_dev_resume_noirq,
+	.freeze_noirq = yenta_dev_suspend_noirq,
+	.thaw_noirq = yenta_dev_resume_noirq,
+	.poweroff_noirq = yenta_dev_suspend_noirq,
+	.restore_noirq = yenta_dev_resume_noirq,
+};
+
+#define YENTA_PM_OPS	(&yenta_pm_ops)
+#else
+#define YENTA_PM_OPS	NULL
 #endif
 
 #define CB_ID(vend,dev,type)				\
@@ -1376,10 +1387,7 @@ static struct pci_driver yenta_cardbus_driver = {
 	.id_table	= yenta_table,
 	.probe		= yenta_probe,
 	.remove		= __devexit_p(yenta_close),
-#ifdef CONFIG_PM
-	.suspend	= yenta_dev_suspend,
-	.resume		= yenta_dev_resume,
-#endif
+	.driver.pm	= YENTA_PM_OPS,
 };