diff options
Diffstat (limited to 'drivers/pcmcia')
| -rw-r--r-- | drivers/pcmcia/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/pcmcia/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pcmcia/m8xx_pcmcia.c | 1168 |
3 files changed, 0 insertions, 1179 deletions
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 0c657d6af03..087d7d7eda7 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -144,16 +144,6 @@ config TCIC "Bridge" is the name used for the hardware inside your computer that PCMCIA cards are plugged into. If unsure, say N. -config PCMCIA_M8XX - tristate "MPC8xx PCMCIA support" - depends on PCCARD && PPC && 8xx - select PCCARD_IODYN if PCMCIA != n - help - Say Y here to include support for PowerPC 8xx series PCMCIA - controller. - - This driver is also available as a module called m8xx_pcmcia. - config PCMCIA_ALCHEMY_DEVBOARD tristate "Alchemy Db/Pb1xxx PCMCIA socket services" depends on MIPS_ALCHEMY && PCMCIA diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 7745b512a87..e62c26bc7a5 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_PD6729) += pd6729.o obj-$(CONFIG_I82365) += i82365.o obj-$(CONFIG_I82092) += i82092.o obj-$(CONFIG_TCIC) += tcic.o -obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o obj-$(CONFIG_PCMCIA_SOC_COMMON) += soc_common.o obj-$(CONFIG_PCMCIA_SA11XX_BASE) += sa11xx_base.o obj-$(CONFIG_PCMCIA_SA1100) += sa1100_cs.o diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c deleted file mode 100644 index 182034d2ef5..00000000000 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ /dev/null @@ -1,1168 +0,0 @@ -/* - * m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series. - * - * (C) 1999-2000 Magnus Damm <damm@opensource.se> - * (C) 2001-2002 Montavista Software, Inc. - * <mlocke@mvista.com> - * - * Support for two slots by Cyclades Corporation - * <oliver.kurth@cyclades.de> - * Further fixes, v2.6 kernel port - * <marcelo.tosatti@cyclades.com> - * - * Some fixes, additions (C) 2005-2007 Montavista Software, Inc. - * <vbordug@ru.mvista.com> - * - * "The ExCA standard specifies that socket controllers should provide - * two IO and five memory windows per socket, which can be independently - * configured and positioned in the host address space and mapped to - * arbitrary segments of card address space. " - David A Hinds. 1999 - * - * This controller does _not_ meet the ExCA standard. - * - * m8xx pcmcia controller brief info: - * + 8 windows (attrib, mem, i/o) - * + up to two slots (SLOT_A and SLOT_B) - * + inputpins, outputpins, event and mask registers. - * - no offset register. sigh. - * - * Because of the lacking offset register we must map the whole card. - * We assign each memory window PCMCIA_MEM_WIN_SIZE address space. - * Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO - * * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE. - * The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE. - * They are maximum 64KByte each... - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/string.h> - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/timer.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/fsl_devices.h> -#include <linux/bitops.h> -#include <linux/of_address.h> -#include <linux/of_device.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> - -#include <asm/io.h> -#include <asm/time.h> -#include <asm/mpc8xx.h> -#include <asm/8xx_immap.h> -#include <asm/irq.h> -#include <asm/fs_pd.h> - -#include <pcmcia/ss.h> - -#define pcmcia_info(args...) printk(KERN_INFO "m8xx_pcmcia: "args) -#define pcmcia_error(args...) printk(KERN_ERR "m8xx_pcmcia: "args) - -static const char *version = "Version 0.06, Aug 2005"; -MODULE_LICENSE("Dual MPL/GPL"); - -#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) - -/* The ADS board use SLOT_A */ -#ifdef CONFIG_ADS -#define CONFIG_PCMCIA_SLOT_A -#define CONFIG_BD_IS_MHZ -#endif - -/* The FADS series are a mess */ -#ifdef CONFIG_FADS -#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC860) || defined(CONFIG_MPC821) -#define CONFIG_PCMCIA_SLOT_A -#else -#define CONFIG_PCMCIA_SLOT_B -#endif -#endif - -#if defined(CONFIG_MPC885ADS) -#define CONFIG_PCMCIA_SLOT_A -#define PCMCIA_GLITCHY_CD -#endif - -/* Cyclades ACS uses both slots */ -#ifdef CONFIG_PRxK -#define CONFIG_PCMCIA_SLOT_A -#define CONFIG_PCMCIA_SLOT_B -#endif - -#endif /* !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) */ - -#if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B) - -#define PCMCIA_SOCKETS_NO 2 -/* We have only 8 windows, dualsocket support will be limited. */ -#define PCMCIA_MEM_WIN_NO 2 -#define PCMCIA_IO_WIN_NO 2 -#define PCMCIA_SLOT_MSG "SLOT_A and SLOT_B" - -#elif defined(CONFIG_PCMCIA_SLOT_A) || defined(CONFIG_PCMCIA_SLOT_B) - -#define PCMCIA_SOCKETS_NO 1 -/* full support for one slot */ -#define PCMCIA_MEM_WIN_NO 5 -#define PCMCIA_IO_WIN_NO 2 - -/* define _slot_ to be able to optimize macros */ - -#ifdef CONFIG_PCMCIA_SLOT_A -#define _slot_ 0 -#define PCMCIA_SLOT_MSG "SLOT_A" -#else -#define _slot_ 1 -#define PCMCIA_SLOT_MSG "SLOT_B" -#endif - -#else -#error m8xx_pcmcia: Bad configuration! -#endif - -/* ------------------------------------------------------------------------- */ - -#define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0 */ -#define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte */ -#define PCMCIA_IO_WIN_BASE _IO_BASE /* base address for io window 0 */ -/* ------------------------------------------------------------------------- */ - -static int pcmcia_schlvl; - -static DEFINE_SPINLOCK(events_lock); - -#define PCMCIA_SOCKET_KEY_5V 1 -#define PCMCIA_SOCKET_KEY_LV 2 - -/* look up table for pgcrx registers */ -static u32 *m8xx_pgcrx[2]; - -/* - * This structure is used to address each window in the PCMCIA controller. - * - * Keep in mind that we assume that pcmcia_win[n+1] is mapped directly - * after pcmcia_win[n]... - */ - -struct pcmcia_win { - u32 br; - u32 or; -}; - -/* - * For some reason the hardware guys decided to make both slots share - * some registers. - * - * Could someone invent object oriented hardware ? - * - * The macros are used to get the right bit from the registers. - * SLOT_A : slot = 0 - * SLOT_B : slot = 1 - */ - -#define M8XX_PCMCIA_VS1(slot) (0x80000000 >> (slot << 4)) -#define M8XX_PCMCIA_VS2(slot) (0x40000000 >> (slot << 4)) -#define M8XX_PCMCIA_VS_MASK(slot) (0xc0000000 >> (slot << 4)) -#define M8XX_PCMCIA_VS_SHIFT(slot) (30 - (slot << 4)) - -#define M8XX_PCMCIA_WP(slot) (0x20000000 >> (slot << 4)) -#define M8XX_PCMCIA_CD2(slot) (0x10000000 >> (slot << 4)) -#define M8XX_PCMCIA_CD1(slot) (0x08000000 >> (slot << 4)) -#define M8XX_PCMCIA_BVD2(slot) (0x04000000 >> (slot << 4)) -#define M8XX_PCMCIA_BVD1(slot) (0x02000000 >> (slot << 4)) -#define M8XX_PCMCIA_RDY(slot) (0x01000000 >> (slot << 4)) -#define M8XX_PCMCIA_RDY_L(slot) (0x00800000 >> (slot << 4)) -#define M8XX_PCMCIA_RDY_H(slot) (0x00400000 >> (slot << 4)) -#define M8XX_PCMCIA_RDY_R(slot) (0x00200000 >> (slot << 4)) -#define M8XX_PCMCIA_RDY_F(slot) (0x00100000 >> (slot << 4)) -#define M8XX_PCMCIA_MASK(slot) (0xFFFF0000 >> (slot << 4)) - -#define M8XX_PCMCIA_POR_VALID 0x00000001 -#define M8XX_PCMCIA_POR_WRPROT 0x00000002 -#define M8XX_PCMCIA_POR_ATTRMEM 0x00000010 -#define M8XX_PCMCIA_POR_IO 0x00000018 -#define M8XX_PCMCIA_POR_16BIT 0x00000040 - -#define M8XX_PGCRX(slot) m8xx_pgcrx[slot] - -#define M8XX_PGCRX_CXOE 0x00000080 -#define M8XX_PGCRX_CXRESET 0x00000040 - -/* we keep one lookup table per socket to check flags */ - -#define PCMCIA_EVENTS_MAX 5 /* 4 max at a time + termination */ - -struct event_table { - u32 regbit; - u32 eventbit; -}; - -static const char driver_name[] = "m8xx-pcmcia"; - -struct socket_info { - void (*handler) (void *info, u32 events); - void *info; - - u32 slot; - pcmconf8xx_t *pcmcia; - u32 bus_freq; - int hwirq; - - socket_state_t state; - struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO]; - struct pccard_io_map io_win[PCMCIA_IO_WIN_NO]; - struct event_table events[PCMCIA_EVENTS_MAX]; - struct pcmcia_socket socket; -}; - -static struct socket_info socket[PCMCIA_SOCKETS_NO]; - -/* - * Search this table to see if the windowsize is - * supported... - */ - -#define M8XX_SIZES_NO 32 - -static const u32 m8xx_size_to_gray[M8XX_SIZES_NO] = { - 0x00000001, 0x00000002, 0x00000008, 0x00000004, - 0x00000080, 0x00000040, 0x00000010, 0x00000020, - 0x00008000, 0x00004000, 0x00001000, 0x00002000, - 0x00000100, 0x00000200, 0x00000800, 0x00000400, - - 0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff, - 0x01000000, 0x02000000, 0xffffffff, 0x04000000, - 0x00010000, 0x00020000, 0x00080000, 0x00040000, - 0x00800000, 0x00400000, 0x00100000, 0x00200000 -}; - -/* ------------------------------------------------------------------------- */ - -static irqreturn_t m8xx_interrupt(int irq, void *dev); - -#define PCMCIA_BMT_LIMIT (15*4) /* Bus Monitor Timeout value */ - -/* FADS Boards from Motorola */ - -#if defined(CONFIG_FADS) - -#define PCMCIA_BOARD_MSG "FADS" - -static int voltage_set(int slot, int vcc, int vpp) -{ - u32 reg = 0; - - switch (vcc) { - case 0: - break; - case 33: - reg |= BCSR1_PCCVCC0; - break; - case 50: - reg |= BCSR1_PCCVCC1; - break; - default: - return 1; - } - - switch (vpp) { - case 0: - break; - case 33: - case 50: - if (vcc == vpp) - reg |= BCSR1_PCCVPP1; - else - return 1; - break; - case 120: - if ((vcc == 33) || (vcc == 50)) - reg |= BCSR1_PCCVPP0; - else - return 1; - default: - return 1; - } - - /* first, turn off all power */ - out_be32((u32 *) BCSR1, - in_be32((u32 *) BCSR1) & ~(BCSR1_PCCVCC_MASK | - BCSR1_PCCVPP_MASK)); - - /* enable new powersettings */ - out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | reg); - - return 0; -} - -#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V - -static void hardware_enable(int slot) -{ - out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) & ~BCSR1_PCCEN); -} - -static void hardware_disable(int slot) -{ - out_be32((u32 *) BCSR1, in_be32((u32 *) BCSR1) | BCSR1_PCCEN); -} - -#endif - -/* MPC885ADS Boards */ - -#if defined(CONFIG_MPC885ADS) - -#define PCMCIA_BOARD_MSG "MPC885ADS" -#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V - -static inline void hardware_enable(int slot) -{ - m8xx_pcmcia_ops.hw_ctrl(slot, 1); -} - -static inline void hardware_disable(int slot) -{ - m8xx_pcmcia_ops.hw_ctrl(slot, 0); -} - -static inline int voltage_set(int slot, int vcc, int vpp) -{ - return m8xx_pcmcia_ops.voltage_set(slot, vcc, vpp); -} - -#endif - -#if defined(CONFIG_PRxK) -#include <asm/cpld.h> -extern volatile fpga_pc_regs *fpga_pc; - -#define PCMCIA_BOARD_MSG "MPC855T" - -static int voltage_set(int slot, int vcc, int vpp) -{ - u8 reg = 0; - u8 regread; - cpld_regs *ccpld = get_cpld(); - - switch (vcc) { - case 0: - break; - case 33: - reg |= PCMCIA_VCC_33; - break; - case 50: - reg |= PCMCIA_VCC_50; - break; - default: - return 1; - } - - switch (vpp) { - case 0: - break; - case 33: - case 50: - if (vcc == vpp) - reg |= PCMCIA_VPP_VCC; - else - return 1; - break; - case 120: - if ((vcc == 33) || (vcc == 50)) - reg |= PCMCIA_VPP_12; - else - return 1; - default: - return 1; - } - - reg = reg >> (slot << 2); - regread = in_8(&ccpld->fpga_pc_ctl); - if (reg != - (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) { - /* enable new powersettings */ - regread = - regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> - (slot << 2)); - out_8(&ccpld->fpga_pc_ctl, reg | regread); - msleep(100); - } - - return 0; -} - -#define socket_get(_slot_) PCMCIA_SOCKET_KEY_LV -#define hardware_enable(_slot_) /* No hardware to enable */ -#define hardware_disable(_slot_) /* No hardware to disable */ - -#endif /* CONFIG_PRxK */ - -static u32 pending_events[PCMCIA_SOCKETS_NO]; -static DEFINE_SPINLOCK(pending_event_lock); - -static irqreturn_t m8xx_interrupt(int irq, void *dev) -{ - struct socket_info *s; - struct event_table *e; - unsigned int i, events, pscr, pipr, per; - pcmconf8xx_t *pcmcia = socket[0].pcmcia; - - pr_debug("m8xx_pcmcia: Interrupt!\n"); - /* get interrupt sources */ - - pscr = in_be32(&pcmcia->pcmc_pscr); - pipr = in_be32(&pcmcia->pcmc_pipr); - per = in_be32(&pcmcia->pcmc_per); - - for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { - s = &socket[i]; - e = &s->events[0]; - events = 0; - - while (e->regbit) { - if (pscr & e->regbit) - events |= e->eventbit; - - e++; - } - - /* - * report only if both card detect signals are the same - * not too nice done, - * we depend on that CD2 is the bit to the left of CD1... - */ - if (events & SS_DETECT) - if (((pipr & M8XX_PCMCIA_CD2(i)) >> 1) ^ - (pipr & M8XX_PCMCIA_CD1(i))) { - events &= ~SS_DETECT; - } -#ifdef PCMCIA_GLITCHY_CD - /* - * I've experienced CD problems with my ADS board. - * We make an extra check to see if there was a - * real change of Card detection. - */ - - if ((events & SS_DETECT) && - ((pipr & - (M8XX_PCMCIA_CD2(i) | M8XX_PCMCIA_CD1(i))) == 0) && - (s->state.Vcc | s->state.Vpp)) { - events &= ~SS_DETECT; - /*printk( "CD glitch workaround - CD = 0x%08x!\n", - (pipr & (M8XX_PCMCIA_CD2(i) - | M8XX_PCMCIA_CD1(i)))); */ - } -#endif - - /* call the handler */ - - pr_debug("m8xx_pcmcia: slot %u: events = 0x%02x, pscr = 0x%08x, " - "pipr = 0x%08x\n", i, events, pscr, pipr); - - if (events) { - spin_lock(&pending_event_lock); - pending_events[i] |= events; - spin_unlock(&pending_event_lock); - /* - * Turn off RDY_L bits in the PER mask on - * CD interrupt receival. - * - * They can generate bad interrupts on the - * ACS4,8,16,32. - marcelo - */ - per &= ~M8XX_PCMCIA_RDY_L(0); - per &= ~M8XX_PCMCIA_RDY_L(1); - - out_be32(&pcmcia->pcmc_per, per); - - if (events) - pcmcia_parse_events(&socket[i].socket, events); - } - } - - /* clear the interrupt sources */ - out_be32(&pcmcia->pcmc_pscr, pscr); - - pr_debug("m8xx_pcmcia: Interrupt done.\n"); - - return IRQ_HANDLED; -} - -static u32 m8xx_get_graycode(u32 size) -{ - u32 k; - - for (k = 0; k < M8XX_SIZES_NO; k++) - if (m8xx_size_to_gray[k] == size) - break; - - if ((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1)) - k = -1; - - return k; -} - -static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq) -{ - u32 reg, clocks, psst, psl, psht; - - if (!ns) { - - /* - * We get called with IO maps setup to 0ns - * if not specified by the user. - * They should be 255ns. - */ - - if (is_io) - ns = 255; - else - ns = 100; /* fast memory if 0 */ - } - - /* - * In PSST, PSL, PSHT fields we tell the controller - * timing parameters in CLKOUT clock cycles. - * CLKOUT is the same as GCLK2_50. - */ - -/* how we want to adjust the timing - in percent */ - -#define ADJ 180 /* 80 % longer accesstime - to be sure */ - - clocks = ((bus_freq / 1000) * ns) / 1000; - clocks = (clocks * ADJ) / (100 * 1000); - if (clocks >= PCMCIA_BMT_LIMIT) { - printk("Max access time limit reached\n"); - clocks = PCMCIA_BMT_LIMIT - 1; - } - - psst = clocks / 7; /* setup time */ - psht = clocks / 7; /* hold time */ - psl = (clocks * 5) / 7; /* strobe length */ - - psst += clocks - (psst + psht + psl); - - reg = psst << 12; - reg |= psl << 7; - reg |= psht << 16; - - return reg; -} - -static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value) -{ - int lsock = container_of(sock, struct socket_info, socket)->slot; - struct socket_info *s = &socket[lsock]; - unsigned int pipr, reg; - pcmconf8xx_t *pcmcia = s->pcmcia; - - pipr = in_be32(&pcmcia->pcmc_pipr); - - *value = ((pipr & (M8XX_PCMCIA_CD1(lsock) - | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0; - *value |= (pipr & M8XX_PCMCIA_WP(lsock)) ? SS_WRPROT : 0; - - if (s->state.flags & SS_IOCARD) - *value |= (pipr & M8XX_PCMCIA_BVD1(lsock)) ? SS_STSCHG : 0; - else { - *value |= (pipr & M8XX_PCMCIA_RDY(lsock)) ? SS_READY : 0; - *value |= (pipr & M8XX_PCMCIA_BVD1(lsock)) ? SS_BATDEAD : 0; - *value |= (pipr & M8XX_PCMCIA_BVD2(lsock)) ? SS_BATWARN : 0; - } - - if (s->state.Vcc | s->state.Vpp) - *value |= SS_POWERON; - - /* - * Voltage detection: - * This driver only supports 16-Bit pc-cards. - * Cardbus is not handled here. - * - * To determine what voltage to use we must read the VS1 and VS2 pin. - * Depending on what socket type is present, - * different combinations mean different things. - * - * Card Key Socket Key VS1 VS2 Card Vcc for CIS parse - * - * 5V 5V, LV* NC NC 5V only 5V (if available) - * - * 5V 5V, LV* GND NC 5 or 3.3V as low as possible - * - * 5V 5V, LV* GND GND 5, 3.3, x.xV as low as possible - * - * LV* 5V - - shall not fit into socket - * - * LV* LV* GND NC 3.3V only 3.3V - * - * LV* LV* NC GND x.xV x.xV (if avail.) - * - * LV* LV* GND GND 3.3 or x.xV as low as possible - * - * *LV means Low Voltage - * - * - * That gives us the following table: - * - * Socket VS1 VS2 Voltage - * - * 5V NC NC 5V - * 5V NC GND none (should not be possible) - * 5V GND NC >= 3.3V - * 5V GND GND >= x.xV - * - * LV NC NC 5V (if available) - * LV NC GND x.xV (if available) - * LV GND NC 3.3V - * LV GND GND >= x.xV - * - * So, how do I determine if I have a 5V or a LV - * socket on my board? Look at the socket! - * - * - * Socket with 5V key: - * ++--------------------------------------------+ - * || | - * || || - * || || - * | | - * +---------------------------------------------+ - * - * Socket with LV key: - * ++--------------------------------------------+ - * || | - * | || - * | || - * | | - * +---------------------------------------------+ - * - * - * With other words - LV only cards does not fit - * into the 5V socket! - */ - - /* read out VS1 and VS2 */ - - reg = (pipr & M8XX_PCMCIA_VS_MASK(lsock)) - >> M8XX_PCMCIA_VS_SHIFT(lsock); - - if (socket_get(lsock) == PCMCIA_SOCKET_KEY_LV) { - switch (reg) { - case 1: - *value |= SS_3VCARD; - break; /* GND, NC - 3.3V only */ - case 2: - *value |= SS_XVCARD; - break; /* NC. GND - x.xV only */ - }; - } - - pr_debug("m8xx_pcmcia: GetStatus(%d) = %#2.2x\n", lsock, *value); - return 0; -} - -static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t * state) -{ - int lsock = container_of(sock, struct socket_info, socket)->slot; - struct socket_info *s = &socket[lsock]; - struct event_table *e; - unsigned int reg; - unsigned long flags; - pcmconf8xx_t *pcmcia = socket[0].pcmcia; - - pr_debug("m8xx_pcmcia: SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, " - "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags, - state->Vcc, state->Vpp, state->io_irq, state->csc_mask); - - /* First, set voltage - bail out if invalid */ - if (voltage_set(lsock, state->Vcc, state->Vpp)) - return -EINVAL; - - /* Take care of reset... */ - if (state->flags & SS_RESET) - out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXRESET); /* active high */ - else - out_be32(M8XX_PGCRX(lsock), - in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXRESET); - - /* ... and output enable. */ - - /* The CxOE signal is connected to a 74541 on the ADS. - I guess most other boards used the ADS as a reference. - I tried to control the CxOE signal with SS_OUTPUT_ENA, - but the reset signal seems connected via the 541. - If the CxOE is left high are some signals tristated and - no pullups are present -> the cards act weird. - So right now the buffers are enabled if the power is on. */ - - if (state->Vcc || state->Vpp) - out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) & ~M8XX_PGCRX_CXOE); /* active low */ - else - out_be32(M8XX_PGCRX(lsock), - in_be32(M8XX_PGCRX(lsock)) | M8XX_PGCRX_CXOE); - - /* - * We'd better turn off interrupts before - * we mess with the events-table.. - */ - - spin_lock_irqsave(&events_lock, flags); - - /* - * Play around with the interrupt mask to be able to - * give the events the generic pcmcia driver wants us to. - */ - - e = &s->events[0]; - reg = 0; - - if (state->csc_mask & SS_DETECT) { - e->eventbit = SS_DETECT; - reg |= e->regbit = (M8XX_PCMCIA_CD2(lsock) - | M8XX_PCMCIA_CD1(lsock)); - e++; - } - if (state->flags & SS_IOCARD) { - /* - * I/O card - */ - if (state->csc_mask & SS_STSCHG) { - e->eventbit = SS_STSCHG; - reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock); - e++; - } - /* - * If io_irq is non-zero we should enable irq. - */ - if (state->io_irq) { - out_be32(M8XX_PGCRX(lsock), - in_be32(M8XX_PGCRX(lsock)) | - mk_int_int_mask(s->hwirq) << 24); - /* - * Strange thing here: - * The manual does not tell us which interrupt - * the sources generate. - * Anyhow, I found out that RDY_L generates IREQLVL. - * - * We use level triggerd interrupts, and they don't - * have to be cleared in PSCR in the interrupt handler. - */ - reg |= M8XX_PCMCIA_RDY_L(lsock); - } else - out_be32(M8XX_PGCRX(lsock), - in_be32(M8XX_PGCRX(lsock)) & 0x00ffffff); - } else { - /* - * Memory card - */ - if (state->csc_mask & SS_BATDEAD) { - e->eventbit = SS_BATDEAD; - reg |= e->regbit = M8XX_PCMCIA_BVD1(lsock); - e++; - } - if (state->csc_mask & SS_BATWARN) { - e->eventbit = SS_BATWARN; - reg |= e->regbit = M8XX_PCMCIA_BVD2(lsock); - e++; - } - /* What should I trigger on - low/high,raise,fall? */ - if (state->csc_mask & SS_READY) { - e->eventbit = SS_READY; - reg |= e->regbit = 0; //?? - e++; - } - } - - e->regbit = 0; /* terminate list */ - - /* - * Clear the status changed . - * Port A and Port B share the same port. - * Writing ones will clear the bits. - */ - - out_be32(&pcmcia->pcmc_pscr, reg); - - /* - * Write the mask. - * Port A and Port B share the same port. - * Need for read-modify-write. - * Ones will enable the interrupt. - */ - - reg |= - in_be32(&pcmcia-> - pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1)); - out_be32(&pcmcia->pcmc_per, reg); - - spin_unlock_irqrestore(&events_lock, flags); - - /* copy the struct and modify the copy */ - - s->state = *state; - - return 0; -} - -static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) -{ - int lsock = container_of(sock, struct socket_info, socket)->slot; - - struct socket_info *s = &socket[lsock]; - struct pcmcia_win *w; - unsigned int reg, winnr; - pcmconf8xx_t *pcmcia = s->pcmcia; - -#define M8XX_SIZE (io->stop - io->start + 1) -#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start) - - pr_debug("m8xx_pcmcia: SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#4.4llx-%#4.4llx)\n", lsock, io->map, io->flags, - io->speed, (unsigned long long)io->start, - (unsigned long long)io->stop); - - if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff) - || (io->stop > 0xffff) || (io->stop < io->start)) - return -EINVAL; - - if ((reg = m8xx_get_graycode(M8XX_SIZE)) == -1) - return -EINVAL; - - if (io->flags & MAP_ACTIVE) { - - pr_debug("m8xx_pcmcia: io->flags & MAP_ACTIVE\n"); - - winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO) - + (lsock * PCMCIA_IO_WIN_NO) + io->map; - - /* setup registers */ - - w = (void *)&pcmcia->pcmc_pbr0; - w += winnr; - - out_be32(&w->or, 0); /* turn off window first */ - out_be32(&w->br, M8XX_BASE); - - reg <<= 27; - reg |= M8XX_PCMCIA_POR_IO | (lsock << 2); - - reg |= m8xx_get_speed(io->speed, 1, s->bus_freq); - - if (io->flags & MAP_WRPROT) - reg |= M8XX_PCMCIA_POR_WRPROT; - - /*if(io->flags & (MAP_16BIT | MAP_AUTOSZ)) */ - if (io->flags & MAP_16BIT) - reg |= M8XX_PCMCIA_POR_16BIT; - - if (io->flags & MAP_ACTIVE) - reg |= M8XX_PCMCIA_POR_VALID; - - out_be32(&w->or, reg); - - pr_debug("m8xx_pcmcia: Socket %u: Mapped io window %u at " - "%#8.8x, OR = %#8.8x.\n", lsock, io->map, w->br, w->or); - } else { - /* shutdown IO window */ - winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO) - + (lsock * PCMCIA_IO_WIN_NO) + io->map; - - /* setup registers */ - - w = (void *)&pcmcia->pcmc_pbr0; - w += winnr; - - out_be32(&w->or, 0); /* turn off window */ - out_be32(&w->br, 0); /* turn off base address */ - - pr_debug("m8xx_pcmcia: Socket %u: Unmapped io window %u at " - "%#8.8x, OR = %#8.8x.\n", lsock, io->map, w->br, w->or); - } - - /* copy the struct and modify the copy */ - s->io_win[io->map] = *io; - s->io_win[io->map].flags &= (MAP_WRPROT | MAP_16BIT | MAP_ACTIVE); - pr_debug("m8xx_pcmcia: SetIOMap exit\n"); - - return 0; -} - -static int m8xx_set_mem_map(struct pcmcia_socket *sock, - struct pccard_mem_map *mem) -{ - int lsock = container_of(sock, struct socket_info, socket)->slot; - struct socket_info *s = &socket[lsock]; - struct pcmcia_win *w; - struct pccard_mem_map *old; - unsigned int reg, winnr; - pcmconf8xx_t *pcmcia = s->pcmcia; - - pr_debug("m8xx_pcmcia: SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags, - mem->speed, (unsigned long long)mem->static_start, - mem->card_start); - - if ((mem->map >= PCMCIA_MEM_WIN_NO) -// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE) - || (mem->card_start >= 0x04000000) - || (mem->static_start & 0xfff) /* 4KByte resolution */ - ||(mem->card_start & 0xfff)) - return -EINVAL; - - if ((reg = m8xx_get_graycode(PCMCIA_MEM_WIN_SIZE)) == -1) { - printk("Cannot set size to 0x%08x.\n", PCMCIA_MEM_WIN_SIZE); - return -EINVAL; - } - reg <<= 27; - - winnr = (lsock * PCMCIA_MEM_WIN_NO) + mem->map; - - /* Setup the window in the pcmcia controller */ - - w = (void *)&pcmcia->pcmc_pbr0; - w += winnr; - - reg |= lsock << 2; - - reg |= m8xx_get_speed(mem->speed, 0, s->bus_freq); - - if (mem->flags & MAP_ATTRIB) - reg |= M8XX_PCMCIA_POR_ATTRMEM; - - if (mem->flags & MAP_WRPROT) - reg |= M8XX_PCMCIA_POR_WRPROT; - - if (mem->flags & MAP_16BIT) - reg |= M8XX_PCMCIA_POR_16BIT; - - if (mem->flags & MAP_ACTIVE) - reg |= M8XX_PCMCIA_POR_VALID; - - out_be32(&w->or, reg); - - pr_debug("m8xx_pcmcia: Socket %u: Mapped memory window %u at %#8.8x, " - "OR = %#8.8x.\n", lsock, mem->map, w->br, w->or); - - if (mem->flags & MAP_ACTIVE) { - /* get the new base address */ - mem->static_start = PCMCIA_MEM_WIN_BASE + - (PCMCIA_MEM_WIN_SIZE * winnr) - + mem->card_start; - } - - pr_debug("m8xx_pcmcia: SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags, - mem->speed, (unsigned long long)mem->static_start, - mem->card_start); - - /* copy the struct and modify the copy */ - - old = &s->mem_win[mem->map]; - - *old = *mem; - old->flags &= (MAP_ATTRIB | MAP_WRPROT | MAP_16BIT | MAP_ACTIVE); - - return 0; -} - -static int m8xx_sock_init(struct pcmcia_socket *sock) -{ - int i; - pccard_io_map io = { 0, 0, 0, 0, 1 }; - pccard_mem_map mem = { 0, 0, 0, 0, 0, 0 }; - - pr_debug("m8xx_pcmcia: sock_init(%d)\n", s); - - m8xx_set_socket(sock, &dead_socket); - for (i = 0; i < PCMCIA_IO_WIN_NO; i++) { - io.map = i; - m8xx_set_io_map(sock, &io); - } - for (i = 0; i < PCMCIA_MEM_WIN_NO; i++) { - mem.map = i; - m8xx_set_mem_map(sock, &mem); - } - - return 0; - -} - -static int m8xx_sock_suspend(struct pcmcia_socket *sock) -{ - return m8xx_set_socket(sock, &dead_socket); -} - -static struct pccard_operations m8xx_services = { - .init = m8xx_sock_init, - .suspend = m8xx_sock_suspend, - .get_status = m8xx_get_status, - .set_socket = m8xx_set_socket, - .set_io_map = m8xx_set_io_map, - .set_mem_map = m8xx_set_mem_map, -}; - -static int __init m8xx_probe(struct platform_device *ofdev) -{ - struct pcmcia_win *w; - unsigned int i, m, hwirq; - pcmconf8xx_t *pcmcia; - int status; - struct device_node *np = ofdev->dev.of_node; - - pcmcia_info("%s\n", version); - - pcmcia = of_iomap(np, 0); - if (pcmcia == NULL) - return -EINVAL; - - pcmcia_schlvl = irq_of_parse_and_map(np, 0); - hwirq = irq_map[pcmcia_schlvl].hwirq; - if (pcmcia_schlvl < 0) { - iounmap(pcmcia); - return -EINVAL; - } - - m8xx_pgcrx[0] = &pcmcia->pcmc_pgcra; - m8xx_pgcrx[1] = &pcmcia->pcmc_pgcrb; - - pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG - " with IRQ %u (%d). \n", pcmcia_schlvl, hwirq); - - /* Configure Status change interrupt */ - - if (request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED, - driver_name, socket)) { - pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n", - pcmcia_schlvl); - iounmap(pcmcia); - return -1; - } - - w = (void *)&pcmcia->pcmc_pbr0; - - out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1)); - clrbits32(&pcmcia->pcmc_per, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1)); - - /* connect interrupt and disable CxOE */ - - out_be32(M8XX_PGCRX(0), - M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16)); - out_be32(M8XX_PGCRX(1), - M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16)); - - /* initialize the fixed memory windows */ - - for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { - for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) { - out_be32(&w->br, PCMCIA_MEM_WIN_BASE + - (PCMCIA_MEM_WIN_SIZE - * (m + i * PCMCIA_MEM_WIN_NO))); - - out_be32(&w->or, 0); /* set to not valid */ - - w++; - } - } - - /* turn off voltage */ - voltage_set(0, 0, 0); - voltage_set(1, 0, 0); - - /* Enable external hardware */ - hardware_enable(0); - hardware_enable(1); - - for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { - socket[i].slot = i; - socket[i].socket.owner = THIS_MODULE; - socket[i].socket.features = - SS_CAP_PCCARD | SS_CAP_MEM_ALIGN | SS_CAP_STATIC_MAP; - socket[i].socket.irq_mask = 0x000; - socket[i].socket.map_size = 0x1000; - socket[i].socket.io_offset = 0; - socket[i].socket.pci_irq = pcmcia_schlvl; - socket[i].socket.ops = &m8xx_services; - socket[i].socket.resource_ops = &pccard_iodyn_ops; - socket[i].socket.cb_dev = NULL; - socket[i].socket.dev.parent = &ofdev->dev; - socket[i].pcmcia = pcmcia; - socket[i].bus_freq = ppc_proc_freq; - socket[i].hwirq = hwirq; - - } - - for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { - status = pcmcia_register_socket(&socket[i].socket); - if (status < 0) - pcmcia_error("Socket register failed\n"); - } - - return 0; -} - -static int m8xx_remove(struct platform_device *ofdev) -{ - u32 m, i; - struct pcmcia_win *w; - pcmconf8xx_t *pcmcia = socket[0].pcmcia; - - for (i = 0; i < PCMCIA_SOCKETS_NO; i++) { - w = (void *)&pcmcia->pcmc_pbr0; - - out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(i)); - out_be32(&pcmcia->pcmc_per, - in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i)); - - /* turn off interrupt and disable CxOE */ - out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE); - - /* turn off memory windows */ - for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) { - out_be32(&w->or, 0); /* set to not valid */ - w++; - } - - /* turn off voltage */ - voltage_set(i, 0, 0); - - /* disable external hardware */ - hardware_disable(i); - } - for (i = 0; i < PCMCIA_SOCKETS_NO; i++) - pcmcia_unregister_socket(&socket[i].socket); - iounmap(pcmcia); - - free_irq(pcmcia_schlvl, NULL); - - return 0; -} - -static const struct of_device_id m8xx_pcmcia_match[] = { - { - .type = "pcmcia", - .compatible = "fsl,pq-pcmcia", - }, - {}, -}; - -MODULE_DEVICE_TABLE(of, m8xx_pcmcia_match); - -static struct platform_driver m8xx_pcmcia_driver = { - .driver = { - .name = driver_name, - .owner = THIS_MODULE, - .of_match_table = m8xx_pcmcia_match, - }, - .probe = m8xx_probe, - .remove = m8xx_remove, -}; - -module_platform_driver(m8xx_pcmcia_driver); |