diff options
Diffstat (limited to 'drivers/phy/Kconfig')
| -rw-r--r-- | drivers/phy/Kconfig | 107 |
1 files changed, 104 insertions, 3 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index c7a551c2d5f..3bb05f17b9b 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -16,30 +16,56 @@ config GENERIC_PHY framework should select this config. config PHY_EXYNOS_MIPI_VIDEO - depends on HAS_IOMEM tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" + depends on HAS_IOMEM + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + select GENERIC_PHY + default y if ARCH_S5PV210 || ARCH_EXYNOS help Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P and EXYNOS SoCs. config PHY_MVEBU_SATA def_bool y - depends on ARCH_KIRKWOOD || ARCH_DOVE + depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD depends on OF select GENERIC_PHY +config OMAP_CONTROL_PHY + tristate "OMAP CONTROL PHY Driver" + help + Enable this to add support for the PHY part present in the control + module. This driver has API to power on the USB2 PHY and to write to + the mailbox. The mailbox is present only in omap4 and the register to + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an + additional register to power on USB3 PHY/SATA PHY/PCIE PHY + (PIPE3 PHY). + config OMAP_USB2 tristate "OMAP USB2 PHY Driver" depends on ARCH_OMAP2PLUS depends on USB_PHY select GENERIC_PHY - select OMAP_CONTROL_USB + select OMAP_CONTROL_PHY + depends on OMAP_OCP2SCP help Enable this to support the transceiver that is part of SOC. This driver takes care of all the PHY functionality apart from comparator. The USB OTG controller communicates with the comparator using this driver. +config TI_PIPE3 + tristate "TI PIPE3 PHY Driver" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + select GENERIC_PHY + select OMAP_CONTROL_PHY + depends on OMAP_OCP2SCP + help + Enable this to support the PIPE3 PHY that is part of TI SOCs. This + driver takes care of all the PHY functionality apart from comparator. + This driver interacts with the "OMAP Control PHY Driver" to power + on/off the PHY. + config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS @@ -54,6 +80,8 @@ config TWL4030_USB config PHY_EXYNOS_DP_VIDEO tristate "EXYNOS SoC series Display Port PHY driver" depends on OF + depends on ARCH_EXYNOS || COMPILE_TEST + default ARCH_EXYNOS select GENERIC_PHY help Support for Display Port PHY found on Samsung EXYNOS SoCs. @@ -65,4 +93,77 @@ config BCM_KONA_USB2_PHY help Enable this to support the Broadcom Kona USB 2.0 PHY. +config PHY_EXYNOS5250_SATA + tristate "Exynos5250 Sata SerDes/PHY driver" + depends on SOC_EXYNOS5250 + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + select I2C + select I2C_S3C2410 + select MFD_SYSCON + help + Enable this to support SATA SerDes/Phy found on Samsung's + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host + port to accept one SATA device. + +config PHY_SUN4I_USB + tristate "Allwinner sunxi SoC USB PHY driver" + depends on ARCH_SUNXI && HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support the transceiver that is part of Allwinner + sunxi SoCs. + + This driver controls the entire USB PHY block, both the USB OTG + parts, as well as the 2 regular USB 2 host PHYs. + +config PHY_SAMSUNG_USB2 + tristate "Samsung USB 2.0 PHY driver" + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the Samsung USB 2.0 PHY driver for Samsung + SoCs. This driver provides the interface for USB 2.0 PHY. Support for + particular SoCs has to be enabled in addition to this driver. Number + and type of supported phys depends on the SoC. + +config PHY_EXYNOS4210_USB2 + bool "Support for Exynos 4210" + depends on PHY_SAMSUNG_USB2 + depends on CPU_EXYNOS4210 + help + Enable USB PHY support for Exynos 4210. This option requires that + Samsung USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of Exynos 4210 four + phys are available - device, host, HSIC0 and HSIC1. + +config PHY_EXYNOS4X12_USB2 + bool "Support for Exynos 4x12" + depends on PHY_SAMSUNG_USB2 + depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) + help + Enable USB PHY support for Exynos 4x12. This option requires that + Samsung USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of Exynos 4x12 four + phys are available - device, host, HSIC0 and HSIC1. + +config PHY_EXYNOS5250_USB2 + bool "Support for Exynos 5250" + depends on PHY_SAMSUNG_USB2 + depends on SOC_EXYNOS5250 + help + Enable USB PHY support for Exynos 5250. This option requires that + Samsung USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of Exynos 5250 four + phys are available - device, host, HSIC0 and HSIC. + +config PHY_XGENE + tristate "APM X-Gene 15Gbps PHY support" + depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) + select GENERIC_PHY + help + This option enables support for APM X-Gene SoC multi-purpose PHY. + endmenu |