diff options
Diffstat (limited to 'drivers/phy')
25 files changed, 843 insertions, 163 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index f833aa271a2..2a436e607f9 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -48,6 +48,13 @@ config PHY_MIPHY365X Enable this to support the miphy transceiver (for SATA/PCIE) that is part of STMicroelectronics STiH41x SoC series. +config PHY_RCAR_GEN2 + tristate "Renesas R-Car generation 2 USB PHY driver" + depends on ARCH_SHMOBILE + depends on GENERIC_PHY + help + Support for USB PHY found on Renesas R-Car generation 2 SoCs. + config OMAP_CONTROL_PHY tristate "OMAP CONTROL PHY Driver" depends on ARCH_OMAP2PLUS || COMPILE_TEST @@ -232,4 +239,21 @@ config PHY_XGENE help This option enables support for APM X-Gene SoC multi-purpose PHY. +config PHY_STIH407_USB + tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" + depends on RESET_CONTROLLER + depends on ARCH_STI || COMPILE_TEST + select GENERIC_PHY + help + Enable this support to enable the picoPHY device used by USB2 + and USB3 controllers on STMicroelectronics STiH407 SoC families. + +config PHY_STIH41X_USB + tristate "STMicroelectronics USB2 PHY driver for STiH41x series" + depends on ARCH_STI + select GENERIC_PHY + help + Enable this to support the USB transceiver that is part of + STMicroelectronics STiH41x SoC series. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 95c69ed5ed4..c4590fce082 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o +obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o @@ -28,3 +29,5 @@ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o +obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o +obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o diff --git a/drivers/phy/phy-bcm-kona-usb2.c b/drivers/phy/phy-bcm-kona-usb2.c index 894fe74c1e4..c1e0ca335c0 100644 --- a/drivers/phy/phy-bcm-kona-usb2.c +++ b/drivers/phy/phy-bcm-kona-usb2.c @@ -143,7 +143,6 @@ static struct platform_driver bcm_kona_usb2_driver = { .probe = bcm_kona_usb2_probe, .driver = { .name = "bcm-kona-usb2", - .owner = THIS_MODULE, .of_match_table = bcm_kona_usb2_dt_ids, }, }; diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c index 5c3a0424aeb..69ced52d72a 100644 --- a/drivers/phy/phy-berlin-sata.c +++ b/drivers/phy/phy-berlin-sata.c @@ -273,7 +273,6 @@ static struct platform_driver phy_berlin_sata_driver = { .probe = phy_berlin_sata_probe, .driver = { .name = "phy-berlin-sata", - .owner = THIS_MODULE, .of_match_table = phy_berlin_sata_of_match, }, }; diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c index 8b3026e2af7..84f49e5a3f2 100644 --- a/drivers/phy/phy-exynos-dp-video.c +++ b/drivers/phy/phy-exynos-dp-video.c @@ -13,44 +13,55 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/exynos5-pmu.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/regmap.h> -/* DPTX_PHY_CONTROL register */ -#define EXYNOS_DPTX_PHY_ENABLE (1 << 0) +struct exynos_dp_video_phy_drvdata { + u32 phy_ctrl_offset; +}; struct exynos_dp_video_phy { - void __iomem *regs; + struct regmap *regs; + const struct exynos_dp_video_phy_drvdata *drvdata; }; -static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on) +static void exynos_dp_video_phy_pwr_isol(struct exynos_dp_video_phy *state, + unsigned int on) { - u32 reg; + unsigned int val; + + if (IS_ERR(state->regs)) + return; - reg = readl(state->regs); - if (on) - reg |= EXYNOS_DPTX_PHY_ENABLE; - else - reg &= ~EXYNOS_DPTX_PHY_ENABLE; - writel(reg, state->regs); + val = on ? 0 : EXYNOS5_PHY_ENABLE; - return 0; + regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset, + EXYNOS5_PHY_ENABLE, val); } static int exynos_dp_video_phy_power_on(struct phy *phy) { struct exynos_dp_video_phy *state = phy_get_drvdata(phy); - return __set_phy_state(state, 1); + /* Disable power isolation on DP-PHY */ + exynos_dp_video_phy_pwr_isol(state, 0); + + return 0; } static int exynos_dp_video_phy_power_off(struct phy *phy) { struct exynos_dp_video_phy *state = phy_get_drvdata(phy); - return __set_phy_state(state, 0); + /* Enable power isolation on DP-PHY */ + exynos_dp_video_phy_pwr_isol(state, 1); + + return 0; } static struct phy_ops exynos_dp_video_phy_ops = { @@ -59,11 +70,31 @@ static struct phy_ops exynos_dp_video_phy_ops = { .owner = THIS_MODULE, }; +static const struct exynos_dp_video_phy_drvdata exynos5250_dp_video_phy = { + .phy_ctrl_offset = EXYNOS5_DPTX_PHY_CONTROL, +}; + +static const struct exynos_dp_video_phy_drvdata exynos5420_dp_video_phy = { + .phy_ctrl_offset = EXYNOS5420_DPTX_PHY_CONTROL, +}; + +static const struct of_device_id exynos_dp_video_phy_of_match[] = { + { + .compatible = "samsung,exynos5250-dp-video-phy", + .data = &exynos5250_dp_video_phy, + }, { + .compatible = "samsung,exynos5420-dp-video-phy", + .data = &exynos5420_dp_video_phy, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); + static int exynos_dp_video_phy_probe(struct platform_device *pdev) { struct exynos_dp_video_phy *state; struct device *dev = &pdev->dev; - struct resource *res; + const struct of_device_id *match; struct phy_provider *phy_provider; struct phy *phy; @@ -71,11 +102,15 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev) if (!state) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - state->regs = devm_ioremap_resource(dev, res); - if (IS_ERR(state->regs)) + state->regs = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,pmu-syscon"); + if (IS_ERR(state->regs)) { + dev_err(dev, "Failed to lookup PMU regmap\n"); return PTR_ERR(state->regs); + } + + match = of_match_node(exynos_dp_video_phy_of_match, dev->of_node); + state->drvdata = match->data; phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops, NULL); if (IS_ERR(phy)) { @@ -89,17 +124,10 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev) return PTR_ERR_OR_ZERO(phy_provider); } -static const struct of_device_id exynos_dp_video_phy_of_match[] = { - { .compatible = "samsung,exynos5250-dp-video-phy" }, - { }, -}; -MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match); - static struct platform_driver exynos_dp_video_phy_driver = { .probe = exynos_dp_video_phy_probe, .driver = { .name = "exynos-dp-video-phy", - .owner = THIS_MODULE, .of_match_table = exynos_dp_video_phy_of_match, } }; diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c index b55a92e1249..6a9bef13861 100644 --- a/drivers/phy/phy-exynos-mipi-video.c +++ b/drivers/phy/phy-exynos-mipi-video.c @@ -165,7 +165,6 @@ static struct platform_driver exynos_mipi_video_phy_driver = { .driver = { .of_match_table = exynos_mipi_video_phy_of_match, .name = "exynos-mipi-video-phy", - .owner = THIS_MODULE, } }; module_platform_driver(exynos_mipi_video_phy_driver); diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c index 392101c8d6b..f756aca871d 100644 --- a/drivers/phy/phy-exynos5-usbdrd.c +++ b/drivers/phy/phy-exynos5-usbdrd.c @@ -667,7 +667,6 @@ static struct platform_driver exynos5_usb3drd_phy = { .driver = { .of_match_table = exynos5_usbdrd_phy_of_match, .name = "exynos5_usb3drd_phy", - .owner = THIS_MODULE, } }; diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/phy-exynos5250-sata.c index 19a679aca4a..54cf4ae60d2 100644 --- a/drivers/phy/phy-exynos5250-sata.c +++ b/drivers/phy/phy-exynos5250-sata.c @@ -240,7 +240,6 @@ static struct platform_driver exynos_sata_phy_driver = { .driver = { .of_match_table = exynos_sata_phy_of_match, .name = "samsung,sata-phy", - .owner = THIS_MODULE, } }; module_platform_driver(exynos_sata_phy_driver); diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/phy-hix5hd2-sata.c index 6a08fa5f81e..d5d978085c6 100644 --- a/drivers/phy/phy-hix5hd2-sata.c +++ b/drivers/phy/phy-hix5hd2-sata.c @@ -180,7 +180,6 @@ static struct platform_driver hix5hd2_sata_phy_driver = { .probe = hix5hd2_sata_phy_probe, .driver = { .name = "hix5hd2-sata-phy", - .owner = THIS_MODULE, .of_match_table = hix5hd2_sata_phy_of_match, } }; diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c index e0fb7a1e5a5..801afaf2d44 100644 --- a/drivers/phy/phy-miphy365x.c +++ b/drivers/phy/phy-miphy365x.c @@ -626,7 +626,6 @@ static struct platform_driver miphy365x_driver = { .probe = miphy365x_probe, .driver = { .name = "miphy365x-phy", - .owner = THIS_MODULE, .of_match_table = miphy365x_of_match, } }; diff --git a/drivers/phy/phy-mvebu-sata.c b/drivers/phy/phy-mvebu-sata.c index cc3c0e166da..d395558cb12 100644 --- a/drivers/phy/phy-mvebu-sata.c +++ b/drivers/phy/phy-mvebu-sata.c @@ -89,6 +89,8 @@ static int phy_mvebu_sata_probe(struct platform_device *pdev) struct phy *phy; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->base = devm_ioremap_resource(&pdev->dev, res); @@ -126,7 +128,6 @@ static struct platform_driver phy_mvebu_sata_driver = { .probe = phy_mvebu_sata_probe, .driver = { .name = "phy-mvebu-sata", - .owner = THIS_MODULE, .of_match_table = phy_mvebu_sata_of_match, } }; diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c index 9487bf11226..c96e8183a8f 100644 --- a/drivers/phy/phy-omap-control.c +++ b/drivers/phy/phy-omap-control.c @@ -295,10 +295,8 @@ static int omap_control_phy_probe(struct platform_device *pdev) control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy), GFP_KERNEL); - if (!control_phy) { - dev_err(&pdev->dev, "unable to alloc memory for control phy\n"); + if (!control_phy) return -ENOMEM; - } control_phy->dev = &pdev->dev; control_phy->type = *(enum omap_control_phy_type *)of_id->data; @@ -347,7 +345,6 @@ static struct platform_driver omap_control_phy_driver = { .probe = omap_control_phy_probe, .driver = { .name = "omap-control-phy", - .owner = THIS_MODULE, .of_match_table = of_match_ptr(omap_control_phy_id_table), }, }; diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 93d78359246..8c842980834 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -212,16 +212,12 @@ static int omap_usb2_probe(struct platform_device *pdev) phy_data = (struct usb_phy_data *)of_id->data; phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); - if (!phy) { - dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n"); + if (!phy) return -ENOMEM; - } otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); - if (!otg) { - dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n"); + if (!otg) return -ENOMEM; - } phy->dev = &pdev->dev; @@ -382,7 +378,6 @@ static struct platform_driver omap_usb2_driver = { .remove = omap_usb2_remove, .driver = { .name = "omap-usb2", - .owner = THIS_MODULE, .pm = DEV_PM_OPS, .of_match_table = of_match_ptr(omap_usb2_id_table), }, diff --git a/drivers/phy/phy-qcom-apq8064-sata.c b/drivers/phy/phy-qcom-apq8064-sata.c index b3ef7d80576..7b3ddfb6589 100644 --- a/drivers/phy/phy-qcom-apq8064-sata.c +++ b/drivers/phy/phy-qcom-apq8064-sata.c @@ -279,7 +279,6 @@ static struct platform_driver qcom_apq8064_sata_phy_driver = { .remove = qcom_apq8064_sata_phy_remove, .driver = { .name = "qcom-apq8064-sata-phy", - .owner = THIS_MODULE, .of_match_table = qcom_apq8064_sata_phy_of_match, } }; diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/phy-qcom-ipq806x-sata.c index 909b5a87fc6..759b0bf5b6b 100644 --- a/drivers/phy/phy-qcom-ipq806x-sata.c +++ b/drivers/phy/phy-qcom-ipq806x-sata.c @@ -201,7 +201,6 @@ static struct platform_driver qcom_ipq806x_sata_phy_driver = { .remove = qcom_ipq806x_sata_phy_remove, .driver = { .name = "qcom-ipq806x-sata-phy", - .owner = THIS_MODULE, .of_match_table = qcom_ipq806x_sata_phy_of_match, } }; diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c new file mode 100644 index 00000000000..2793af17799 --- /dev/null +++ b/drivers/phy/phy-rcar-gen2.c @@ -0,0 +1,341 @@ +/* + * Renesas R-Car Gen2 PHY driver + * + * Copyright (C) 2014 Renesas Solutions Corp. + * Copyright (C) 2014 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> + +#include <asm/cmpxchg.h> + +#define USBHS_LPSTS 0x02 +#define USBHS_UGCTRL 0x80 +#define USBHS_UGCTRL2 0x84 +#define USBHS_UGSTS 0x88 /* The manuals have 0x90 */ + +/* Low Power Status register (LPSTS) */ +#define USBHS_LPSTS_SUSPM 0x4000 + +/* USB General control register (UGCTRL) */ +#define USBHS_UGCTRL_CONNECT 0x00000004 +#define USBHS_UGCTRL_PLLRESET 0x00000001 + +/* USB General control register 2 (UGCTRL2) */ +#define USBHS_UGCTRL2_USB2SEL 0x80000000 +#define USBHS_UGCTRL2_USB2SEL_PCI 0x00000000 +#define USBHS_UGCTRL2_USB2SEL_USB30 0x80000000 +#define USBHS_UGCTRL2_USB0SEL 0x00000030 +#define USBHS_UGCTRL2_USB0SEL_PCI 0x00000010 +#define USBHS_UGCTRL2_USB0SEL_HS_USB 0x00000030 + +/* USB General status register (UGSTS) */ +#define USBHS_UGSTS_LOCK 0x00000300 /* The manuals have 0x3 */ + +#define PHYS_PER_CHANNEL 2 + +struct rcar_gen2_phy { + struct phy *phy; + struct rcar_gen2_channel *channel; + int number; + u32 select_value; +}; + +struct rcar_gen2_channel { + struct device_node *of_node; + struct rcar_gen2_phy_driver *drv; + struct rcar_gen2_phy phys[PHYS_PER_CHANNEL]; + int selected_phy; + u32 select_mask; +}; + +struct rcar_gen2_phy_driver { + void __iomem *base; + struct clk *clk; + spinlock_t lock; + int num_channels; + struct rcar_gen2_channel *channels; +}; + +static int rcar_gen2_phy_init(struct phy *p) +{ + struct rcar_gen2_phy *phy = phy_get_drvdata(p); + struct rcar_gen2_channel *channel = phy->channel; + struct rcar_gen2_phy_driver *drv = channel->drv; + unsigned long flags; + u32 ugctrl2; + + /* + * Try to acquire exclusive access to PHY. The first driver calling + * phy_init() on a given channel wins, and all attempts to use another + * PHY on this channel will fail until phy_exit() is called by the first + * driver. Achieving this with cmpxcgh() should be SMP-safe. + */ + if (cmpxchg(&channel->selected_phy, -1, phy->number) != -1) + return -EBUSY; + + clk_prepare_enable(drv->clk); + + spin_lock_irqsave(&drv->lock, flags); + ugctrl2 = readl(drv->base + USBHS_UGCTRL2); + ugctrl2 &= ~channel->select_mask; + ugctrl2 |= phy->select_value; + writel(ugctrl2, drv->base + USBHS_UGCTRL2); + spin_unlock_irqrestore(&drv->lock, flags); + return 0; +} + +static int rcar_gen2_phy_exit(struct phy *p) +{ + struct rcar_gen2_phy *phy = phy_get_drvdata(p); + struct rcar_gen2_channel *channel = phy->channel; + + clk_disable_unprepare(channel->drv->clk); + + channel->selected_phy = -1; + + return 0; +} + +static int rcar_gen2_phy_power_on(struct phy *p) +{ + struct rcar_gen2_phy *phy = phy_get_drvdata(p); + struct rcar_gen2_phy_driver *drv = phy->channel->drv; + void __iomem *base = drv->base; + unsigned long flags; + u32 value; + int err = 0, i; + + /* Skip if it's not USBHS */ + if (phy->select_value != USBHS_UGCTRL2_USB0SEL_HS_USB) + return 0; + + spin_lock_irqsave(&drv->lock, flags); + + /* Power on USBHS PHY */ + value = readl(base + USBHS_UGCTRL); + value &= ~USBHS_UGCTRL_PLLRESET; + writel(value, base + USBHS_UGCTRL); + + value = readw(base + USBHS_LPSTS); + value |= USBHS_LPSTS_SUSPM; + writew(value, base + USBHS_LPSTS); + + for (i = 0; i < 20; i++) { + value = readl(base + USBHS_UGSTS); + if ((value & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) { + value = readl(base + USBHS_UGCTRL); + value |= USBHS_UGCTRL_CONNECT; + writel(value, base + USBHS_UGCTRL); + goto out; + } + udelay(1); + } + + /* Timed out waiting for the PLL lock */ + err = -ETIMEDOUT; + +out: + spin_unlock_irqrestore(&drv->lock, flags); + + return err; +} + +static int rcar_gen2_phy_power_off(struct phy *p) +{ + struct rcar_gen2_phy *phy = phy_get_drvdata(p); + struct rcar_gen2_phy_driver *drv = phy->channel->drv; + void __iomem *base = drv->base; + unsigned long flags; + u32 value; + + /* Skip if it's not USBHS */ + if (phy->select_value != USBHS_UGCTRL2_USB0SEL_HS_USB) + return 0; + + spin_lock_irqsave(&drv->lock, flags); + + /* Power off USBHS PHY */ + value = readl(base + USBHS_UGCTRL); + value &= ~USBHS_UGCTRL_CONNECT; + writel(value, base + USBHS_UGCTRL); + + value = readw(base + USBHS_LPSTS); + value &= ~USBHS_LPSTS_SUSPM; + writew(value, base + USBHS_LPSTS); + + value = readl(base + USBHS_UGCTRL); + value |= USBHS_UGCTRL_PLLRESET; + writel(value, base + USBHS_UGCTRL); + + spin_unlock_irqrestore(&drv->lock, flags); + + return 0; +} + +static struct phy_ops rcar_gen2_phy_ops = { + .init = rcar_gen2_phy_init, + .exit = rcar_gen2_phy_exit, + .power_on = rcar_gen2_phy_power_on, + .power_off = rcar_gen2_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct of_device_id rcar_gen2_phy_match_table[] = { + { .compatible = "renesas,usb-phy-r8a7790" }, + { .compatible = "renesas,usb-phy-r8a7791" }, + { } +}; +MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table); + +static struct phy *rcar_gen2_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct rcar_gen2_phy_driver *drv; + struct device_node *np = args->np; + int i; + + if (!of_device_is_available(np)) { + dev_warn(dev, "Requested PHY is disabled\n"); + return ERR_PTR(-ENODEV); + } + + drv = dev_get_drvdata(dev); + if (!drv) + return ERR_PTR(-EINVAL); + + for (i = 0; i < drv->num_channels; i++) { + if (np == drv->channels[i].of_node) + break; + } + + if (i >= drv->num_channels || args->args[0] >= 2) + return ERR_PTR(-ENODEV); + + return drv->channels[i].phys[args->args[0]].phy; +} + +static const u32 select_mask[] = { + [0] = USBHS_UGCTRL2_USB0SEL, + [2] = USBHS_UGCTRL2_USB2SEL, +}; + +static const u32 select_value[][PHYS_PER_CHANNEL] = { + [0] = { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB }, + [2] = { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 }, +}; + +static int rcar_gen2_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rcar_gen2_phy_driver *drv; + struct phy_provider *provider; + struct device_node *np; + struct resource *res; + void __iomem *base; + struct clk *clk; + int i = 0; + + if (!dev->of_node) { + dev_err(dev, + "This driver is required to be instantiated from device tree\n"); + return -EINVAL; + } + + clk = devm_clk_get(dev, "usbhs"); + if (IS_ERR(clk)) { + dev_err(dev, "Can't get USBHS clock\n"); + return PTR_ERR(clk); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + spin_lock_init(&drv->lock); + + drv->clk = clk; + drv->base = base; + + drv->num_channels = of_get_child_count(dev->of_node); + drv->channels = devm_kcalloc(dev, drv->num_channels, + sizeof(struct rcar_gen2_channel), + GFP_KERNEL); + if (!drv->channels) + return -ENOMEM; + + for_each_child_of_node(dev->of_node, np) { + struct rcar_gen2_channel *channel = drv->channels + i; + u32 channel_num; + int error, n; + + channel->of_node = np; + channel->drv = drv; + channel->selected_phy = -1; + + error = of_property_read_u32(np, "reg", &channel_num); + if (error || channel_num > 2) { + dev_err(dev, "Invalid \"reg\" property\n"); + return error; + } + channel->select_mask = select_mask[channel_num]; + + for (n = 0; n < PHYS_PER_CHANNEL; n++) { + struct rcar_gen2_phy *phy = &channel->phys[n]; + + phy->channel = channel; + phy->number = n; + phy->select_value = select_value[channel_num][n]; + + phy->phy = devm_phy_create(dev, NULL, + &rcar_gen2_phy_ops, NULL); + if (IS_ERR(phy->phy)) { + dev_err(dev, "Failed to create PHY\n"); + return PTR_ERR(phy->phy); + } + phy_set_drvdata(phy->phy, phy); + } + + i++; + } + + provider = devm_of_phy_provider_register(dev, rcar_gen2_phy_xlate); + if (IS_ERR(provider)) { + dev_err(dev, "Failed to register PHY provider\n"); + return PTR_ERR(provider); + } + + dev_set_drvdata(dev, drv); + + return 0; +} + +static struct platform_driver rcar_gen2_phy_driver = { + .driver = { + .name = "phy_rcar_gen2", + .of_match_table = rcar_gen2_phy_match_table, + }, + .probe = rcar_gen2_phy_probe, +}; + +module_platform_driver(rcar_gen2_phy_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Renesas R-Car Gen2 PHY"); +MODULE_AUTHOR("Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>"); diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c index 3732ca25e09..908949dfb4d 100644 --- a/drivers/phy/phy-samsung-usb2.c +++ b/drivers/phy/phy-samsung-usb2.c @@ -231,7 +231,6 @@ static struct platform_driver samsung_usb2_phy_driver = { .driver = { .of_match_table = samsung_usb2_phy_of_match, .name = "samsung-usb2-phy", - .owner = THIS_MODULE, } }; diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/phy-spear1310-miphy.c index 6dcbfcddb37..5f4c586ee95 100644 --- a/drivers/phy/phy-spear1310-miphy.c +++ b/drivers/phy/phy-spear1310-miphy.c @@ -212,10 +212,8 @@ static int spear1310_miphy_probe(struct platform_device *pdev) struct phy_provider *phy_provider; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(dev, "can't alloc spear1310_miphy private date memory\n"); + if (!priv) return -ENOMEM; - } priv->misc = syscon_regmap_lookup_by_phandle(dev->of_node, "misc"); @@ -252,22 +250,11 @@ static struct platform_driver spear1310_miphy_driver = { .probe = spear1310_miphy_probe, .driver = { .name = "spear1310-miphy", - .owner = THIS_MODULE, .of_match_table = of_match_ptr(spear1310_miphy_of_match), }, }; -static int __init spear1310_miphy_phy_init(void) -{ - return platform_driver_register(&spear1310_miphy_driver); -} -module_init(spear1310_miphy_phy_init); - -static void __exit spear1310_miphy_phy_exit(void) -{ - platform_driver_unregister(&spear1310_miphy_driver); -} -module_exit(spear1310_miphy_phy_exit); +module_platform_driver(spear1310_miphy_driver); MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver"); MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>"); diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/phy-spear1340-miphy.c index 7135ba2603b..1ecd0945bad 100644 --- a/drivers/phy/phy-spear1340-miphy.c +++ b/drivers/phy/phy-spear1340-miphy.c @@ -249,10 +249,8 @@ static int spear1340_miphy_probe(struct platform_device *pdev) struct phy_provider *phy_provider; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(dev, "can't alloc spear1340_miphy private date memory\n"); + if (!priv) return -ENOMEM; - } priv->misc = syscon_regmap_lookup_by_phandle(dev->of_node, "misc"); @@ -284,23 +282,12 @@ static struct platform_driver spear1340_miphy_driver = { .probe = spear1340_miphy_probe, .driver = { .name = "spear1340-miphy", - .owner = THIS_MODULE, .pm = &spear1340_miphy_pm_ops, .of_match_table = of_match_ptr(spear1340_miphy_of_match), }, }; -static int __init spear1340_miphy_phy_init(void) -{ - return platform_driver_register(&spear1340_miphy_driver); -} -module_init(spear1340_miphy_phy_init); - -static void __exit spear1340_miphy_phy_exit(void) -{ - platform_driver_unregister(&spear1340_miphy_driver); -} -module_exit(spear1340_miphy_phy_exit); +module_platform_driver(spear1340_miphy_driver); MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver"); MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>"); diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/phy-stih407-usb.c new file mode 100644 index 00000000000..42428d4181e --- /dev/null +++ b/drivers/phy/phy-stih407-usb.c @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2014 STMicroelectronics + * + * STMicroelectronics Generic PHY driver for STiH407 USB2. + * + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/clk.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/mfd/syscon.h> +#include <linux/phy/phy.h> + +/* Default PHY_SEL and REFCLKSEL configuration */ +#define STIH407_USB_PICOPHY_CTRL_PORT_CONF 0x6 +#define STIH407_USB_PICOPHY_CTRL_PORT_MASK 0x1f + +/* ports parameters overriding */ +#define STIH407_USB_PICOPHY_PARAM_DEF 0x39a4dc +#define STIH407_USB_PICOPHY_PARAM_MASK 0xffffffff + +struct stih407_usb2_picophy { + struct phy *phy; + struct regmap *regmap; + struct device *dev; + struct reset_control *rstc; + struct reset_control *rstport; + int ctrl; + int param; +}; + +static int stih407_usb2_pico_ctrl(struct stih407_usb2_picophy *phy_dev) +{ + reset_control_deassert(phy_dev->rstc); + + return regmap_update_bits(phy_dev->regmap, phy_dev->ctrl, + STIH407_USB_PICOPHY_CTRL_PORT_MASK, + STIH407_USB_PICOPHY_CTRL_PORT_CONF); +} + +static int stih407_usb2_init_port(struct phy *phy) +{ + int ret; + struct stih407_usb2_picophy *phy_dev = phy_get_drvdata(phy); + + stih407_usb2_pico_ctrl(phy_dev); + + ret = regmap_update_bits(phy_dev->regmap, + phy_dev->param, + STIH407_USB_PICOPHY_PARAM_MASK, + STIH407_USB_PICOPHY_PARAM_DEF); + if (ret) + return ret; + + return reset_control_deassert(phy_dev->rstport); +} + +static int stih407_usb2_exit_port(struct phy *phy) +{ + struct stih407_usb2_picophy *phy_dev = phy_get_drvdata(phy); + + /* + * Only port reset is asserted, phy global reset is kept untouched + * as other ports may still be active. When all ports are in reset + * state, assumption is made that power will be cut off on the phy, in + * case of suspend for instance. Theoretically, asserting individual + * reset (like here) or global reset should be equivalent. + */ + return reset_control_assert(phy_dev->rstport); +} + +static const struct phy_ops stih407_usb2_picophy_data = { + .init = stih407_usb2_init_port, + .exit = stih407_usb2_exit_port, + .owner = THIS_MODULE, +}; + +static int stih407_usb2_picophy_probe(struct platform_device *pdev) +{ + struct stih407_usb2_picophy *phy_dev; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + struct phy *phy; + struct resource *res; + + phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL); + if (!phy_dev) + return -ENOMEM; + + phy_dev->dev = dev; + dev_set_drvdata(dev, phy_dev); + + phy_dev->rstc = devm_reset_control_get(dev, "global"); + if (IS_ERR(phy_dev->rstc)) { + dev_err(dev, "failed to ctrl picoPHY reset\n"); + return PTR_ERR(phy_dev->rstc); + } + + phy_dev->rstport = devm_reset_control_get(dev, "port"); + if (IS_ERR(phy_dev->rstport)) { + dev_err(dev, "failed to ctrl picoPHY reset\n"); + return PTR_ERR(phy_dev->rstport); + } + + /* Reset port by default: only deassert it in phy init */ + reset_control_assert(phy_dev->rstport); + + phy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(phy_dev->regmap)) { + dev_err(dev, "No syscfg phandle specified\n"); + return PTR_ERR(phy_dev->regmap); + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl"); + if (!res) { + dev_err(dev, "No ctrl reg found\n"); + return -ENXIO; + } + phy_dev->ctrl = res->start; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "param"); + if (!res) { + dev_err(dev, "No param reg found\n"); + return -ENXIO; + } + phy_dev->param = res->start; + + phy = devm_phy_create(dev, NULL, &stih407_usb2_picophy_data, NULL); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create Display Port PHY\n"); + return PTR_ERR(phy); + } + + phy_dev->phy = phy; + phy_set_drvdata(phy, phy_dev); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + dev_info(dev, "STiH407 USB Generic picoPHY driver probed!"); + + return 0; +} + +static const struct of_device_id stih407_usb2_picophy_of_match[] = { + { .compatible = "st,stih407-usb2-phy" }, + { /*sentinel */ }, +}; + +MODULE_DEVICE_TABLE(of, stih407_usb2_picophy_of_match); + +static struct platform_driver stih407_usb2_picophy_driver = { + .probe = stih407_usb2_picophy_probe, + .driver = { + .name = "stih407-usb-genphy", + .of_match_table = stih407_usb2_picophy_of_match, + } +}; + +module_platform_driver(stih407_usb2_picophy_driver); + +MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics Generic picoPHY driver for STiH407"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-stih41x-usb.c b/drivers/phy/phy-stih41x-usb.c new file mode 100644 index 00000000000..9f16cb8e01f --- /dev/null +++ b/drivers/phy/phy-stih41x-usb.c @@ -0,0 +1,187 @@ +/* + * Copyright (C) 2014 STMicroelectronics + * + * STMicroelectronics PHY driver for STiH41x USB. + * + * Author: Maxime Coquelin <maxime.coquelin@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/clk.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> + +#define SYSCFG332 0x80 +#define SYSCFG2520 0x820 + +/** + * struct stih41x_usb_cfg - SoC specific PHY register mapping + * @syscfg: Offset in syscfg registers bank + * @cfg_mask: Bits mask for PHY configuration + * @cfg: Static configuration value for PHY + * @oscok: Notify the PHY oscillator clock is ready + * Setting this bit enable the PHY + */ +struct stih41x_usb_cfg { + u32 syscfg; + u32 cfg_mask; + u32 cfg; + u32 oscok; +}; + +/** + * struct stih41x_usb_phy - Private data for the PHY + * @dev: device for this controller + * @regmap: Syscfg registers bank in which PHY is configured + * @cfg: SoC specific PHY register mapping + * @clk: Oscillator used by the PHY + */ +struct stih41x_usb_phy { + struct device *dev; + struct regmap *regmap; + const struct stih41x_usb_cfg *cfg; + struct clk *clk; +}; + +static struct stih41x_usb_cfg stih415_usb_phy_cfg = { + .syscfg = SYSCFG332, + .cfg_mask = 0x3f, + .cfg = 0x38, + .oscok = BIT(6), +}; + +static struct stih41x_usb_cfg stih416_usb_phy_cfg = { + .syscfg = SYSCFG2520, + .cfg_mask = 0x33f, + .cfg = 0x238, + .oscok = BIT(6), +}; + +static int stih41x_usb_phy_init(struct phy *phy) +{ + struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy); + + return regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, + phy_dev->cfg->cfg_mask, phy_dev->cfg->cfg); +} + +static int stih41x_usb_phy_power_on(struct phy *phy) +{ + struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy); + int ret; + + ret = clk_prepare_enable(phy_dev->clk); + if (ret) { + dev_err(phy_dev->dev, "Failed to enable osc_phy clock\n"); + return ret; + } + + return regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, + phy_dev->cfg->oscok, phy_dev->cfg->oscok); +} + +static int stih41x_usb_phy_power_off(struct phy *phy) +{ + struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy); + int ret; + + ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg, + phy_dev->cfg->oscok, 0); + if (ret) { + dev_err(phy_dev->dev, "Failed to clear oscok bit\n"); + return ret; + } + + clk_disable_unprepare(phy_dev->clk); + + return 0; +} + +static struct phy_ops stih41x_usb_phy_ops = { + .init = stih41x_usb_phy_init, + .power_on = stih41x_usb_phy_power_on, + .power_off = stih41x_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static const struct of_device_id stih41x_usb_phy_of_match[]; + +static int stih41x_usb_phy_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + struct stih41x_usb_phy *phy_dev; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct phy *phy; + + phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL); + if (!phy_dev) + return -ENOMEM; + + match = of_match_device(stih41x_usb_phy_of_match, &pdev->dev); + if (!match) + return -ENODEV; + + phy_dev->cfg = match->data; + + phy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg"); + if (IS_ERR(phy_dev->regmap)) { + dev_err(dev, "No syscfg phandle specified\n"); + return PTR_ERR(phy_dev->regmap); + } + + phy_dev->clk = devm_clk_get(dev, "osc_phy"); + if (IS_ERR(phy_dev->clk)) { + dev_err(dev, "osc_phy clk not found\n"); + return PTR_ERR(phy_dev->clk); + } + + phy = devm_phy_create(dev, NULL, &stih41x_usb_phy_ops, NULL); + + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + return PTR_ERR(phy); + } + + phy_dev->dev = dev; + + phy_set_drvdata(phy, phy_dev); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + return 0; +} + +static const struct of_device_id stih41x_usb_phy_of_match[] = { + { .compatible = "st,stih415-usb-phy", .data = &stih415_usb_phy_cfg }, + { .compatible = "st,stih416-usb-phy", .data = &stih416_usb_phy_cfg }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, stih41x_usb_phy_of_match); + +static struct platform_driver stih41x_usb_phy_driver = { + .probe = stih41x_usb_phy_probe, + .driver = { + .name = "stih41x-usb-phy", + .of_match_table = stih41x_usb_phy_of_match, + } +}; +module_platform_driver(stih41x_usb_phy_driver); + +MODULE_AUTHOR("Maxime Coquelin <maxime.coquelin@st.com>"); +MODULE_DESCRIPTION("STMicroelectronics USB PHY driver for STiH41x series"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 61ebea49709..0baf5efc8a4 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -325,7 +325,6 @@ static struct platform_driver sun4i_usb_phy_driver = { .driver = { .of_match_table = sun4i_usb_phy_of_match, .name = "sun4i-usb-phy", - .owner = THIS_MODULE, } }; module_platform_driver(sun4i_usb_phy_driver); diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index b964aa967b4..ab1e22d9a1e 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -299,10 +299,9 @@ static int ti_pipe3_probe(struct platform_device *pdev) struct clk *clk; phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); - if (!phy) { - dev_err(&pdev->dev, "unable to alloc mem for TI PIPE3 PHY\n"); + if (!phy) return -ENOMEM; - } + phy->dev = &pdev->dev; if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { @@ -519,7 +518,6 @@ static struct platform_driver ti_pipe3_driver = { .remove = ti_pipe3_remove, .driver = { .name = "ti-pipe3", - .owner = THIS_MODULE, .pm = DEV_PM_OPS, .of_match_table = of_match_ptr(ti_pipe3_id_table), }, diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c index 9cd33a4bcfb..7b04befd527 100644 --- a/drivers/phy/phy-twl4030-usb.c +++ b/drivers/phy/phy-twl4030-usb.c @@ -28,7 +28,6 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <linux/spinlock.h> #include <linux/workqueue.h> #include <linux/io.h> #include <linux/delay.h> @@ -155,7 +154,7 @@ struct twl4030_usb { struct regulator *usb3v1; /* for vbus reporting with irqs disabled */ - spinlock_t lock; + struct mutex lock; /* pin configuration */ enum twl4030_usb_mode usb_mode; @@ -163,8 +162,6 @@ struct twl4030_usb { int irq; enum omap_musb_vbus_id_status linkstat; bool vbus_supplied; - u8 asleep; - bool irq_enabled; struct delayed_work id_workaround_work; }; @@ -384,55 +381,18 @@ static void __twl4030_phy_power(struct twl4030_usb *twl, int on) WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); } -static void twl4030_phy_power(struct twl4030_usb *twl, int on) -{ - int ret; - - if (on) { - ret = regulator_enable(twl->usb3v1); - if (ret) - dev_err(twl->dev, "Failed to enable usb3v1\n"); - - ret = regulator_enable(twl->usb1v8); - if (ret) - dev_err(twl->dev, "Failed to enable usb1v8\n"); - - /* - * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP - * in twl4030) resets the VUSB_DEDICATED2 register. This reset - * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to - * SLEEP. We work around this by clearing the bit after usv3v1 - * is re-activated. This ensures that VUSB3V1 is really active. - */ - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); - - ret = regulator_enable(twl->usb1v5); - if (ret) - dev_err(twl->dev, "Failed to enable usb1v5\n"); - - __twl4030_phy_power(twl, 1); - twl4030_usb_write(twl, PHY_CLK_CTRL, - twl4030_usb_read(twl, PHY_CLK_CTRL) | - (PHY_CLK_CTRL_CLOCKGATING_EN | - PHY_CLK_CTRL_CLK32K_EN)); - } else { - __twl4030_phy_power(twl, 0); - regulator_disable(twl->usb1v5); - regulator_disable(twl->usb1v8); - regulator_disable(twl->usb3v1); - } -} - static int twl4030_usb_runtime_suspend(struct device *dev) { struct twl4030_usb *twl = dev_get_drvdata(dev); dev_dbg(twl->dev, "%s\n", __func__); - if (twl->asleep) + if (pm_runtime_suspended(dev)) return 0; - twl4030_phy_power(twl, 0); - twl->asleep = 1; + __twl4030_phy_power(twl, 0); + regulator_disable(twl->usb1v5); + regulator_disable(twl->usb1v8); + regulator_disable(twl->usb3v1); return 0; } @@ -440,13 +400,38 @@ static int twl4030_usb_runtime_suspend(struct device *dev) static int twl4030_usb_runtime_resume(struct device *dev) { struct twl4030_usb *twl = dev_get_drvdata(dev); + int res; dev_dbg(twl->dev, "%s\n", __func__); - if (!twl->asleep) + if (pm_runtime_active(dev)) return 0; - twl4030_phy_power(twl, 1); - twl->asleep = 0; + res = regulator_enable(twl->usb3v1); + if (res) + dev_err(twl->dev, "Failed to enable usb3v1\n"); + + res = regulator_enable(twl->usb1v8); + if (res) + dev_err(twl->dev, "Failed to enable usb1v8\n"); + + /* + * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP + * in twl4030) resets the VUSB_DEDICATED2 register. This reset + * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to + * SLEEP. We work around this by clearing the bit after usv3v1 + * is re-activated. This ensures that VUSB3V1 is really active. + */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); + + res = regulator_enable(twl->usb1v5); + if (res) + dev_err(twl->dev, "Failed to enable usb1v5\n"); + + __twl4030_phy_power(twl, 1); + twl4030_usb_write(twl, PHY_CLK_CTRL, + twl4030_usb_read(twl, PHY_CLK_CTRL) | + (PHY_CLK_CTRL_CLOCKGATING_EN | + PHY_CLK_CTRL_CLK32K_EN)); return 0; } @@ -472,16 +457,8 @@ static int twl4030_phy_power_on(struct phy *phy) twl4030_usb_set_mode(twl, twl->usb_mode); if (twl->usb_mode == T2_USB_MODE_ULPI) twl4030_i2c_access(twl, 0); + schedule_delayed_work(&twl->id_workaround_work, 0); - /* - * XXX When VBUS gets driven after musb goes to A mode, - * ID_PRES related interrupts no longer arrive, why? - * Register itself is updated fine though, so we must poll. - */ - if (twl->linkstat == OMAP_MUSB_ID_GROUND) { - cancel_delayed_work(&twl->id_workaround_work); - schedule_delayed_work(&twl->id_workaround_work, HZ); - } return 0; } @@ -538,13 +515,12 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf) { struct twl4030_usb *twl = dev_get_drvdata(dev); - unsigned long flags; int ret = -EINVAL; - spin_lock_irqsave(&twl->lock, flags); + mutex_lock(&twl->lock); ret = sprintf(buf, "%s\n", twl->vbus_supplied ? "on" : "off"); - spin_unlock_irqrestore(&twl->lock, flags); + mutex_unlock(&twl->lock); return ret; } @@ -558,12 +534,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) status = twl4030_usb_linkstat(twl); - spin_lock_irq(&twl->lock); + mutex_lock(&twl->lock); if (status >= 0 && status != twl->linkstat) { twl->linkstat = status; status_changed = true; } - spin_unlock_irq(&twl->lock); + mutex_unlock(&twl->lock); if (status_changed) { /* FIXME add a set_power() method so that B-devices can @@ -579,10 +555,10 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) */ if ((status == OMAP_MUSB_VBUS_VALID) || (status == OMAP_MUSB_ID_GROUND)) { - if (twl->asleep) + if (pm_runtime_suspended(twl->dev)) pm_runtime_get_sync(twl->dev); } else { - if (!twl->asleep) { + if (pm_runtime_active(twl->dev)) { pm_runtime_mark_last_busy(twl->dev); pm_runtime_put_autosuspend(twl->dev); } @@ -591,7 +567,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) } /* don't schedule during sleep - irq works right then */ - if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) { + if (status == OMAP_MUSB_ID_GROUND && pm_runtime_active(twl->dev)) { cancel_delayed_work(&twl->id_workaround_work); schedule_delayed_work(&twl->id_workaround_work, HZ); } @@ -613,16 +589,9 @@ static void twl4030_id_workaround_work(struct work_struct *work) static int twl4030_phy_init(struct phy *phy) { struct twl4030_usb *twl = phy_get_drvdata(phy); - enum omap_musb_vbus_id_status status; pm_runtime_get_sync(twl->dev); - status = twl4030_usb_linkstat(twl); - twl->linkstat = status; - - if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID) - omap_musb_mailbox(twl->linkstat); - - sysfs_notify(&twl->dev->kobj, NULL, "vbus"); + schedule_delayed_work(&twl->id_workaround_work, 0); pm_runtime_mark_last_busy(twl->dev); pm_runtime_put_autosuspend(twl->dev); @@ -699,7 +668,7 @@ static int twl4030_usb_probe(struct platform_device *pdev) twl->dev = &pdev->dev; twl->irq = platform_get_irq(pdev, 0); twl->vbus_supplied = false; - twl->asleep = 1; + twl->linkstat = -EINVAL; twl->linkstat = OMAP_MUSB_UNKNOWN; twl->phy.dev = twl->dev; @@ -724,8 +693,8 @@ static int twl4030_usb_probe(struct platform_device *pdev) if (IS_ERR(phy_provider)) return PTR_ERR(phy_provider); - /* init spinlock for workqueue */ - spin_lock_init(&twl->lock); + /* init mutex for workqueue */ + mutex_init(&twl->lock); INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work); @@ -755,7 +724,6 @@ static int twl4030_usb_probe(struct platform_device *pdev) * set_host() and/or set_peripheral() ... OTG_capable boards * need both handles, otherwise just one suffices. */ - twl->irq_enabled = true; status = devm_request_threaded_irq(twl->dev, twl->irq, NULL, twl4030_usb_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl); @@ -817,7 +785,6 @@ static struct platform_driver twl4030_usb_driver = { .driver = { .name = "twl4030_usb", .pm = &twl4030_usb_pm_ops, - .owner = THIS_MODULE, .of_match_table = of_match_ptr(twl4030_usb_id_table), }, }; diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c index db809b97219..f8a51b16ade 100644 --- a/drivers/phy/phy-xgene.c +++ b/drivers/phy/phy-xgene.c @@ -1738,7 +1738,6 @@ static struct platform_driver xgene_phy_driver = { .probe = xgene_phy_probe, .driver = { .name = "xgene-phy", - .owner = THIS_MODULE, .of_match_table = xgene_phy_of_match, }, }; |