summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/pinctrl-abx500.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pinctrl/pinctrl-abx500.c')
-rw-r--r--drivers/pinctrl/pinctrl-abx500.c1012
1 files changed, 1012 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
new file mode 100644
index 00000000000..caecdd37306
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-abx500.c
@@ -0,0 +1,1012 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2013
+ *
+ * Author: Patrice Chotard <patrice.chotard@st.com>
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+
+#include "pinctrl-abx500.h"
+
+/*
+ * The AB9540 and AB8540 GPIO support are extended versions
+ * of the AB8500 GPIO support.
+ * The AB9540 supports an additional (7th) register so that
+ * more GPIO may be configured and used.
+ * The AB8540 supports 4 new gpios (GPIOx_VBAT) that have
+ * internal pull-up and pull-down capabilities.
+ */
+
+/*
+ * GPIO registers offset
+ * Bank: 0x10
+ */
+#define AB8500_GPIO_SEL1_REG 0x00
+#define AB8500_GPIO_SEL2_REG 0x01
+#define AB8500_GPIO_SEL3_REG 0x02
+#define AB8500_GPIO_SEL4_REG 0x03
+#define AB8500_GPIO_SEL5_REG 0x04
+#define AB8500_GPIO_SEL6_REG 0x05
+#define AB9540_GPIO_SEL7_REG 0x06
+
+#define AB8500_GPIO_DIR1_REG 0x10
+#define AB8500_GPIO_DIR2_REG 0x11
+#define AB8500_GPIO_DIR3_REG 0x12
+#define AB8500_GPIO_DIR4_REG 0x13
+#define AB8500_GPIO_DIR5_REG 0x14
+#define AB8500_GPIO_DIR6_REG 0x15
+#define AB9540_GPIO_DIR7_REG 0x16
+
+#define AB8500_GPIO_OUT1_REG 0x20
+#define AB8500_GPIO_OUT2_REG 0x21
+#define AB8500_GPIO_OUT3_REG 0x22
+#define AB8500_GPIO_OUT4_REG 0x23
+#define AB8500_GPIO_OUT5_REG 0x24
+#define AB8500_GPIO_OUT6_REG 0x25
+#define AB9540_GPIO_OUT7_REG 0x26
+
+#define AB8500_GPIO_PUD1_REG 0x30
+#define AB8500_GPIO_PUD2_REG 0x31
+#define AB8500_GPIO_PUD3_REG 0x32
+#define AB8500_GPIO_PUD4_REG 0x33
+#define AB8500_GPIO_PUD5_REG 0x34
+#define AB8500_GPIO_PUD6_REG 0x35
+#define AB9540_GPIO_PUD7_REG 0x36
+
+#define AB8500_GPIO_IN1_REG 0x40
+#define AB8500_GPIO_IN2_REG 0x41
+#define AB8500_GPIO_IN3_REG 0x42
+#define AB8500_GPIO_IN4_REG 0x43
+#define AB8500_GPIO_IN5_REG 0x44
+#define AB8500_GPIO_IN6_REG 0x45
+#define AB9540_GPIO_IN7_REG 0x46
+#define AB8540_GPIO_VINSEL_REG 0x47
+#define AB8540_GPIO_PULL_UPDOWN_REG 0x48
+#define AB8500_GPIO_ALTFUN_REG 0x50
+#define AB8540_GPIO_PULL_UPDOWN_MASK 0x03
+#define AB8540_GPIO_VINSEL_MASK 0x03
+#define AB8540_GPIOX_VBAT_START 51
+#define AB8540_GPIOX_VBAT_END 54
+
+struct abx500_pinctrl {
+ struct device *dev;
+ struct pinctrl_dev *pctldev;
+ struct abx500_pinctrl_soc_data *soc;
+ struct gpio_chip chip;
+ struct ab8500 *parent;
+ struct mutex lock;
+ struct abx500_gpio_irq_cluster *irq_cluster;
+ int irq_cluster_size;
+};
+
+/**
+ * to_abx500_pinctrl() - get the pointer to abx500_pinctrl
+ * @chip: Member of the structure abx500_pinctrl
+ */
+static inline struct abx500_pinctrl *to_abx500_pinctrl(struct gpio_chip *chip)
+{
+ return container_of(chip, struct abx500_pinctrl, chip);
+}
+
+static int abx500_gpio_get_bit(struct gpio_chip *chip, u8 reg,
+ unsigned offset, bool *bit)
+{
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ u8 pos = offset % 8;
+ u8 val;
+ int ret;
+
+ reg += offset / 8;
+ ret = abx500_get_register_interruptible(pct->dev,
+ AB8500_MISC, reg, &val);
+
+ *bit = !!(val & BIT(pos));
+
+ if (ret < 0)
+ dev_err(pct->dev,
+ "%s read reg =%x, offset=%x failed\n",
+ __func__, reg, offset);
+
+ return ret;
+}
+
+static int abx500_gpio_set_bits(struct gpio_chip *chip, u8 reg,
+ unsigned offset, int val)
+{
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ u8 pos = offset % 8;
+ int ret;
+
+ reg += offset / 8;
+ ret = abx500_mask_and_set_register_interruptible(pct->dev,
+ AB8500_MISC, reg, BIT(pos), val << pos);
+ if (ret < 0)
+ dev_err(pct->dev, "%s write failed\n", __func__);
+
+ return ret;
+}
+
+/**
+ * abx500_gpio_get() - Get the particular GPIO value
+ * @chip: Gpio device
+ * @offset: GPIO number to read
+ */
+static int abx500_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ bool bit;
+ int ret;
+
+ ret = abx500_gpio_get_bit(chip, AB8500_GPIO_IN1_REG,
+ offset, &bit);
+ if (ret < 0) {
+ dev_err(pct->dev, "%s failed\n", __func__);
+ return ret;
+ }
+
+ return bit;
+}
+
+static void abx500_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ int ret;
+
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
+ if (ret < 0)
+ dev_err(pct->dev, "%s write failed\n", __func__);
+}
+
+static int abx500_config_pull_updown(struct abx500_pinctrl *pct,
+ int offset, enum abx500_gpio_pull_updown val)
+{
+ u8 pos;
+ int ret;
+ struct pullud *pullud;
+
+ if (!pct->soc->pullud) {
+ dev_err(pct->dev, "%s AB chip doesn't support pull up/down feature",
+ __func__);
+ ret = -EPERM;
+ goto out;
+ }
+
+ pullud = pct->soc->pullud;
+
+ if ((offset < pullud->first_pin)
+ || (offset > pullud->last_pin)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ pos = offset << 1;
+
+ ret = abx500_mask_and_set_register_interruptible(pct->dev,
+ AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG,
+ AB8540_GPIO_PULL_UPDOWN_MASK << pos, val << pos);
+
+out:
+ if (ret < 0)
+ dev_err(pct->dev, "%s failed (%d)\n", __func__, ret);
+
+ return ret;
+}
+
+static int abx500_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset,
+ int val)
+{
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ struct pullud *pullud = pct->soc->pullud;
+ unsigned gpio;
+ int ret;
+
+ /* set direction as output */
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1);
+ if (ret < 0)
+ return ret;
+
+ /* disable pull down */
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1);
+ if (ret < 0)
+ return ret;
+
+ /* if supported, disable both pull down and pull up */
+ gpio = offset + 1;
+ if (pullud && gpio >= pullud->first_pin && gpio <= pullud->last_pin) {
+ ret = abx500_config_pull_updown(pct,
+ gpio,
+ ABX500_GPIO_PULL_NONE);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* set the output as 1 or 0 */
+ return abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val);
+}
+
+static int abx500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ /* set the register as input */
+ return abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0);
+}
+
+static int abx500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ /* The AB8500 GPIO numbers are off by one */
+ int gpio = offset + 1;
+ int hwirq;
+ int i;
+
+ for (i = 0; i < pct->irq_cluster_size; i++) {
+ struct abx500_gpio_irq_cluster *cluster =
+ &pct->irq_cluster[i];
+
+ if (gpio >= cluster->start && gpio <= cluster->end) {
+ /*
+ * The ABx500 GPIO's associated IRQs are clustered together
+ * throughout the interrupt numbers at irregular intervals.
+ * To solve this quandry, we have placed the read-in values
+ * into the cluster information table.
+ */
+ hwirq = gpio - cluster->start + cluster->to_irq;
+ return irq_create_mapping(pct->parent->domain, hwirq);
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
+ unsigned gpio, int alt_setting)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ struct alternate_functions af = pct->soc->alternate_functions[gpio];
+ int ret;
+ int val;
+ unsigned offset;
+
+ const char *modes[] = {
+ [ABX500_DEFAULT] = "default",
+ [ABX500_ALT_A] = "altA",
+ [ABX500_ALT_B] = "altB",
+ [ABX500_ALT_C] = "altC",
+ };
+
+ /* sanity check */
+ if (((alt_setting == ABX500_ALT_A) && (af.gpiosel_bit == UNUSED)) ||
+ ((alt_setting == ABX500_ALT_B) && (af.alt_bit1 == UNUSED)) ||
+ ((alt_setting == ABX500_ALT_C) && (af.alt_bit2 == UNUSED))) {
+ dev_dbg(pct->dev, "pin %d doesn't support %s mode\n", gpio,
+ modes[alt_setting]);
+ return -EINVAL;
+ }
+
+ /* on ABx5xx, there is no GPIO0, so adjust the offset */
+ offset = gpio - 1;
+
+ switch (alt_setting) {
+ case ABX500_DEFAULT:
+ /*
+ * for ABx5xx family, default mode is always selected by
+ * writing 0 to GPIOSELx register, except for pins which
+ * support at least ALT_B mode, default mode is selected
+ * by writing 1 to GPIOSELx register
+ */
+ val = 0;
+ if (af.alt_bit1 != UNUSED)
+ val++;
+
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
+ offset, val);
+ break;
+
+ case ABX500_ALT_A:
+ /*
+ * for ABx5xx family, alt_a mode is always selected by
+ * writing 1 to GPIOSELx register, except for pins which
+ * support at least ALT_B mode, alt_a mode is selected
+ * by writing 0 to GPIOSELx register and 0 in ALTFUNC
+ * register
+ */
+ if (af.alt_bit1 != UNUSED) {
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
+ offset, 0);
+ ret = abx500_gpio_set_bits(chip,
+ AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit1,
+ !!(af.alta_val && BIT(0)));
+ if (af.alt_bit2 != UNUSED)
+ ret = abx500_gpio_set_bits(chip,
+ AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit2,
+ !!(af.alta_val && BIT(1)));
+ } else
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
+ offset, 1);
+ break;
+
+ case ABX500_ALT_B:
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
+ offset, 0);
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit1, !!(af.altb_val && BIT(0)));
+ if (af.alt_bit2 != UNUSED)
+ ret = abx500_gpio_set_bits(chip,
+ AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit2,
+ !!(af.altb_val && BIT(1)));
+ break;
+
+ case ABX500_ALT_C:
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG,
+ offset, 0);
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit2, !!(af.altc_val && BIT(0)));
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit2, !!(af.altc_val && BIT(1)));
+ break;
+
+ default:
+ dev_dbg(pct->dev, "unknow alt_setting %d\n", alt_setting);
+
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static u8 abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip,
+ unsigned gpio)
+{
+ u8 mode;
+ bool bit_mode;
+ bool alt_bit1;
+ bool alt_bit2;
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ struct alternate_functions af = pct->soc->alternate_functions[gpio];
+ /* on ABx5xx, there is no GPIO0, so adjust the offset */
+ unsigned offset = gpio - 1;
+
+ /*
+ * if gpiosel_bit is set to unused,
+ * it means no GPIO or special case
+ */
+ if (af.gpiosel_bit == UNUSED)
+ return ABX500_DEFAULT;
+
+ /* read GpioSelx register */
+ abx500_gpio_get_bit(chip, AB8500_GPIO_SEL1_REG + (offset / 8),
+ af.gpiosel_bit, &bit_mode);
+ mode = bit_mode;
+
+ /* sanity check */
+ if ((af.alt_bit1 < UNUSED) || (af.alt_bit1 > 7) ||
+ (af.alt_bit2 < UNUSED) || (af.alt_bit2 > 7)) {
+ dev_err(pct->dev,
+ "alt_bitX value not in correct range (-1 to 7)\n");
+ return -EINVAL;
+ }
+
+ /* if alt_bit2 is used, alt_bit1 must be used too */
+ if ((af.alt_bit2 != UNUSED) && (af.alt_bit1 == UNUSED)) {
+ dev_err(pct->dev,
+ "if alt_bit2 is used, alt_bit1 can't be unused\n");
+ return -EINVAL;
+ }
+
+ /* check if pin use AlternateFunction register */
+ if ((af.alt_bit1 == UNUSED) && (af.alt_bit1 == UNUSED))
+ return mode;
+ /*
+ * if pin GPIOSEL bit is set and pin supports alternate function,
+ * it means DEFAULT mode
+ */
+ if (mode)
+ return ABX500_DEFAULT;
+
+ /*
+ * pin use the AlternatFunction register
+ * read alt_bit1 value
+ */
+ abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG,
+ af.alt_bit1, &alt_bit1);
+
+ if (af.alt_bit2 != UNUSED)
+ /* read alt_bit2 value */
+ abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit2,
+ &alt_bit2);
+ else
+ alt_bit2 = 0;
+
+ mode = (alt_bit2 << 1) + alt_bit1;
+ if (mode == af.alta_val)
+ return ABX500_ALT_A;
+ else if (mode == af.altb_val)
+ return ABX500_ALT_B;
+ else
+ return ABX500_ALT_C;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+#include <linux/seq_file.h>
+
+static void abx500_gpio_dbg_show_one(struct seq_file *s,
+ struct pinctrl_dev *pctldev,
+ struct gpio_chip *chip,
+ unsigned offset, unsigned gpio)
+{
+ const char *label = gpiochip_is_requested(chip, offset - 1);
+ u8 gpio_offset = offset - 1;
+ int mode = -1;
+ bool is_out;
+ bool pull;
+
+ const char *modes[] = {
+ [ABX500_DEFAULT] = "default",
+ [ABX500_ALT_A] = "altA",
+ [ABX500_ALT_B] = "altB",
+ [ABX500_ALT_C] = "altC",
+ };
+
+ abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG, gpio_offset, &is_out);
+ abx500_gpio_get_bit(chip, AB8500_GPIO_PUD1_REG, gpio_offset, &pull);
+
+ if (pctldev)
+ mode = abx500_get_mode(pctldev, chip, offset);
+
+ seq_printf(s, " gpio-%-3d (%-20.20s) %-3s %-9s %s",
+ gpio, label ?: "(none)",
+ is_out ? "out" : "in ",
+ is_out ?
+ (chip->get
+ ? (chip->get(chip, offset) ? "hi" : "lo")
+ : "? ")
+ : (pull ? "pull up" : "pull down"),
+ (mode < 0) ? "unknown" : modes[mode]);
+}
+
+static void abx500_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ unsigned i;
+ unsigned gpio = chip->base;
+ struct abx500_pinctrl *pct = to_abx500_pinctrl(chip);
+ struct pinctrl_dev *pctldev = pct->pctldev;
+
+ for (i = 0; i < chip->ngpio; i++, gpio++) {
+ /* On AB8500, there is no GPIO0, the first is the GPIO 1 */
+ abx500_gpio_dbg_show_one(s, pctldev, chip, i + 1, gpio);
+ seq_printf(s, "\n");
+ }
+}
+
+#else
+static inline void abx500_gpio_dbg_show_one(struct seq_file *s,
+ struct pinctrl_dev *pctldev,
+ struct gpio_chip *chip,
+ unsigned offset, unsigned gpio)
+{
+}
+#define abx500_gpio_dbg_show NULL
+#endif
+
+int abx500_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ return pinctrl_request_gpio(gpio);
+}
+
+void abx500_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio = chip->base + offset;
+
+ pinctrl_free_gpio(gpio);
+}
+
+static struct gpio_chip abx500gpio_chip = {
+ .label = "abx500-gpio",
+ .owner = THIS_MODULE,
+ .request = abx500_gpio_request,
+ .free = abx500_gpio_free,
+ .direction_input = abx500_gpio_direction_input,
+ .get = abx500_gpio_get,
+ .direction_output = abx500_gpio_direction_output,
+ .set = abx500_gpio_set,
+ .to_irq = abx500_gpio_to_irq,
+ .dbg_show = abx500_gpio_dbg_show,
+};
+
+static int abx500_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+
+ return pct->soc->nfunctions;
+}
+
+static const char *abx500_pmx_get_func_name(struct pinctrl_dev *pctldev,
+ unsigned function)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+
+ return pct->soc->functions[function].name;
+}
+
+static int abx500_pmx_get_func_groups(struct pinctrl_dev *pctldev,
+ unsigned function,
+ const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pct->soc->functions[function].groups;
+ *num_groups = pct->soc->functions[function].ngroups;
+
+ return 0;
+}
+
+static int abx500_pmx_enable(struct pinctrl_dev *pctldev, unsigned function,
+ unsigned group)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ struct gpio_chip *chip = &pct->chip;
+ const struct abx500_pingroup *g;
+ int i;
+ int ret = 0;
+
+ g = &pct->soc->groups[group];
+ if (g->altsetting < 0)
+ return -EINVAL;
+
+ dev_dbg(pct->dev, "enable group %s, %u pins\n", g->name, g->npins);
+
+ for (i = 0; i < g->npins; i++) {
+ dev_dbg(pct->dev, "setting pin %d to altsetting %d\n",
+ g->pins[i], g->altsetting);
+
+ ret = abx500_set_mode(pctldev, chip, g->pins[i], g->altsetting);
+ }
+
+ return ret;
+}
+
+static void abx500_pmx_disable(struct pinctrl_dev *pctldev,
+ unsigned function, unsigned group)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ const struct abx500_pingroup *g;
+
+ g = &pct->soc->groups[group];
+ if (g->altsetting < 0)
+ return;
+
+ /* FIXME: poke out the mux, set the pin to some default state? */
+ dev_dbg(pct->dev, "disable group %s, %u pins\n", g->name, g->npins);
+}
+
+int abx500_gpio_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ const struct abx500_pinrange *p;
+ int ret;
+ int i;
+
+ /*
+ * Different ranges have different ways to enable GPIO function on a
+ * pin, so refer back to our local range type, where we handily define
+ * what altfunc enables GPIO for a certain pin.
+ */
+ for (i = 0; i < pct->soc->gpio_num_ranges; i++) {
+ p = &pct->soc->gpio_ranges[i];
+ if ((offset >= p->offset) &&
+ (offset < (p->offset + p->npins)))
+ break;
+ }
+
+ if (i == pct->soc->gpio_num_ranges) {
+ dev_err(pct->dev, "%s failed to locate range\n", __func__);
+ return -ENODEV;
+ }
+
+ dev_dbg(pct->dev, "enable GPIO by altfunc %d at gpio %d\n",
+ p->altfunc, offset);
+
+ ret = abx500_set_mode(pct->pctldev, &pct->chip,
+ offset, p->altfunc);
+ if (ret < 0) {
+ dev_err(pct->dev, "%s setting altfunc failed\n", __func__);
+ return ret;
+ }
+
+ return ret;
+}
+
+static void abx500_gpio_disable_free(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned offset)
+{
+}
+
+static struct pinmux_ops abx500_pinmux_ops = {
+ .get_functions_count = abx500_pmx_get_funcs_cnt,
+ .get_function_name = abx500_pmx_get_func_name,
+ .get_function_groups = abx500_pmx_get_func_groups,
+ .enable = abx500_pmx_enable,
+ .disable = abx500_pmx_disable,
+ .gpio_request_enable = abx500_gpio_request_enable,
+ .gpio_disable_free = abx500_gpio_disable_free,
+};
+
+static int abx500_get_groups_cnt(struct pinctrl_dev *pctldev)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+
+ return pct->soc->ngroups;
+}
+
+static const char *abx500_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+
+ return pct->soc->groups[selector].name;
+}
+
+static int abx500_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned selector,
+ const unsigned **pins,
+ unsigned *num_pins)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = pct->soc->groups[selector].pins;
+ *num_pins = pct->soc->groups[selector].npins;
+
+ return 0;
+}
+
+static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s, unsigned offset)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ struct gpio_chip *chip = &pct->chip;
+
+ abx500_gpio_dbg_show_one(s, pctldev, chip, offset,
+ chip->base + offset - 1);
+}
+
+static struct pinctrl_ops abx500_pinctrl_ops = {
+ .get_groups_count = abx500_get_groups_cnt,
+ .get_group_name = abx500_get_group_name,
+ .get_group_pins = abx500_get_group_pins,
+ .pin_dbg_show = abx500_pin_dbg_show,
+};
+
+int abx500_pin_config_get(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long *config)
+{
+ return -ENOSYS;
+}
+
+int abx500_pin_config_set(struct pinctrl_dev *pctldev,
+ unsigned pin,
+ unsigned long config)
+{
+ struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev);
+ struct pullud *pullud = pct->soc->pullud;
+ struct gpio_chip *chip = &pct->chip;
+ unsigned offset;
+ int ret;
+ enum pin_config_param param = pinconf_to_config_param(config);
+ enum pin_config_param argument = pinconf_to_config_argument(config);
+
+ dev_dbg(chip->dev, "pin %d [%#lx]: %s %s\n",
+ pin, config, (param == PIN_CONFIG_OUTPUT) ? "output " : "input",
+ (param == PIN_CONFIG_OUTPUT) ? (argument ? "high" : "low") :
+ (argument ? "pull up" : "pull down"));
+
+ /* on ABx500, there is no GPIO0, so adjust the offset */
+ offset = pin - 1;
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ /*
+ * if argument = 1 set the pull down
+ * else clear the pull down
+ */
+ ret = abx500_gpio_direction_input(chip, offset);
+ /*
+ * Some chips only support pull down, while some actually
+ * support both pull up and pull down. Such chips have
+ * a "pullud" range specified for the pins that support
+ * both features. If the pin is not within that range, we
+ * fall back to the old bit set that only support pull down.
+ */
+ if (pullud &&
+ pin >= pullud->first_pin &&
+ pin <= pullud->last_pin)
+ ret = abx500_config_pull_updown(pct,
+ pin,
+ argument ? ABX500_GPIO_PULL_DOWN : ABX500_GPIO_PULL_NONE);
+ else
+ /* Chip only supports pull down */
+ ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG,
+ offset, argument ? 0 : 1);
+ break;
+
+ case PIN_CONFIG_OUTPUT:
+ ret = abx500_gpio_direction_output(chip, offset, argument);
+
+ break;
+
+ default:
+ dev_err(chip->dev, "illegal configuration requested\n");
+
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static struct pinconf_ops abx500_pinconf_ops = {
+ .pin_config_get = abx500_pin_config_get,
+ .pin_config_set = abx500_pin_config_set,
+};
+
+static struct pinctrl_desc abx500_pinctrl_desc = {
+ .name = "pinctrl-abx500",
+ .pctlops = &abx500_pinctrl_ops,
+ .pmxops = &abx500_pinmux_ops,
+ .confops = &abx500_pinconf_ops,
+ .owner = THIS_MODULE,
+};
+
+static int abx500_get_gpio_num(struct abx500_pinctrl_soc_data *soc)
+{
+ unsigned int lowest = 0;
+ unsigned int highest = 0;
+ unsigned int npins = 0;
+ int i;
+
+ /*
+ * Compute number of GPIOs from the last SoC gpio range descriptors
+ * These ranges may include "holes" but the GPIO number space shall
+ * still be homogeneous, so we need to detect and account for any
+ * such holes so that these are included in the number of GPIO pins.
+ */
+ for (i = 0; i < soc->gpio_num_ranges; i++) {
+ unsigned gstart;
+ unsigned gend;
+ const struct abx500_pinrange *p;
+
+ p = &soc->gpio_ranges[i];
+ gstart = p->offset;
+ gend = p->offset + p->npins - 1;
+
+ if (i == 0) {
+ /* First iteration, set start values */
+ lowest = gstart;
+ highest = gend;
+ } else {
+ if (gstart < lowest)
+ lowest = gstart;
+ if (gend > highest)
+ highest = gend;
+ }
+ }
+ /* this gives the absolute number of pins */
+ npins = highest - lowest + 1;
+ return npins;
+}
+
+static const struct of_device_id abx500_gpio_match[] = {
+ { .compatible = "stericsson,ab8500-gpio", .data = (void *)PINCTRL_AB8500, },
+ { .compatible = "stericsson,ab8505-gpio", .data = (void *)PINCTRL_AB8505, },
+ { .compatible = "stericsson,ab8540-gpio", .data = (void *)PINCTRL_AB8540, },
+ { .compatible = "stericsson,ab9540-gpio", .data = (void *)PINCTRL_AB9540, },
+};
+
+static int abx500_gpio_probe(struct platform_device *pdev)
+{
+ struct ab8500_platform_data *abx500_pdata =
+ dev_get_platdata(pdev->dev.parent);
+ struct abx500_gpio_platform_data *pdata = NULL;
+ struct device_node *np = pdev->dev.of_node;
+ struct abx500_pinctrl *pct;
+ const struct platform_device_id *platid = platform_get_device_id(pdev);
+ unsigned int id = -1;
+ int ret, err;
+ int i;
+
+ if (abx500_pdata)
+ pdata = abx500_pdata->gpio;
+ if (!pdata) {
+ if (np) {
+ const struct of_device_id *match;
+
+ match = of_match_device(abx500_gpio_match, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+ id = (unsigned long)match->data;
+ } else {
+ dev_err(&pdev->dev, "gpio dt and platform data missing\n");
+ return -ENODEV;
+ }
+ }
+
+ if (platid)
+ id = platid->driver_data;
+
+ pct = devm_kzalloc(&pdev->dev, sizeof(struct abx500_pinctrl),
+ GFP_KERNEL);
+ if (pct == NULL) {
+ dev_err(&pdev->dev,
+ "failed to allocate memory for pct\n");
+ return -ENOMEM;
+ }
+
+ pct->dev = &pdev->dev;
+ pct->parent = dev_get_drvdata(pdev->dev.parent);
+ pct->chip = abx500gpio_chip;
+ pct->chip.dev = &pdev->dev;
+ pct->chip.base = pdata->gpio_base;
+ pct->chip.base = (np) ? -1 : pdata->gpio_base;
+
+ /* initialize the lock */
+ mutex_init(&pct->lock);
+
+ /* Poke in other ASIC variants here */
+ switch (id) {
+ case PINCTRL_AB8500:
+ abx500_pinctrl_ab8500_init(&pct->soc);
+ break;
+ case PINCTRL_AB8540:
+ abx500_pinctrl_ab8540_init(&pct->soc);
+ break;
+ case PINCTRL_AB9540:
+ abx500_pinctrl_ab9540_init(&pct->soc);
+ break;
+ case PINCTRL_AB8505:
+ abx500_pinctrl_ab8505_init(&pct->soc);
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n",
+ (int) platid->driver_data);
+ mutex_destroy(&pct->lock);
+ return -EINVAL;
+ }
+
+ if (!pct->soc) {
+ dev_err(&pdev->dev, "Invalid SOC data\n");
+ mutex_destroy(&pct->lock);
+ return -EINVAL;
+ }
+
+ pct->chip.ngpio = abx500_get_gpio_num(pct->soc);
+ pct->irq_cluster = pct->soc->gpio_irq_cluster;
+ pct->irq_cluster_size = pct->soc->ngpio_irq_cluster;
+
+ ret = gpiochip_add(&pct->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
+ mutex_destroy(&pct->lock);
+ return ret;
+ }
+ dev_info(&pdev->dev, "added gpiochip\n");
+
+ abx500_pinctrl_desc.pins = pct->soc->pins;
+ abx500_pinctrl_desc.npins = pct->soc->npins;
+ pct->pctldev = pinctrl_register(&abx500_pinctrl_desc, &pdev->dev, pct);
+ if (!pct->pctldev) {
+ dev_err(&pdev->dev,
+ "could not register abx500 pinctrl driver\n");
+ ret = -EINVAL;
+ goto out_rem_chip;
+ }
+ dev_info(&pdev->dev, "registered pin controller\n");
+
+ /* We will handle a range of GPIO pins */
+ for (i = 0; i < pct->soc->gpio_num_ranges; i++) {
+ const struct abx500_pinrange *p = &pct->soc->gpio_ranges[i];
+
+ ret = gpiochip_add_pin_range(&pct->chip,
+ dev_name(&pdev->dev),
+ p->offset - 1, p->offset, p->npins);
+ if (ret < 0)
+ goto out_rem_chip;
+ }
+
+ platform_set_drvdata(pdev, pct);
+ dev_info(&pdev->dev, "initialized abx500 pinctrl driver\n");
+
+ return 0;
+
+out_rem_chip:
+ err = gpiochip_remove(&pct->chip);
+ if (err)
+ dev_info(&pdev->dev, "failed to remove gpiochip\n");
+
+ mutex_destroy(&pct->lock);
+ return ret;
+}
+
+/**
+ * abx500_gpio_remove() - remove Ab8500-gpio driver
+ * @pdev: Platform device registered
+ */
+static int abx500_gpio_remove(struct platform_device *pdev)
+{
+ struct abx500_pinctrl *pct = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = gpiochip_remove(&pct->chip);
+ if (ret < 0) {
+ dev_err(pct->dev, "unable to remove gpiochip: %d\n",
+ ret);
+ return ret;
+ }
+
+ mutex_destroy(&pct->lock);
+
+ return 0;
+}
+
+static const struct platform_device_id abx500_pinctrl_id[] = {
+ { "pinctrl-ab8500", PINCTRL_AB8500 },
+ { "pinctrl-ab8540", PINCTRL_AB8540 },
+ { "pinctrl-ab9540", PINCTRL_AB9540 },
+ { "pinctrl-ab8505", PINCTRL_AB8505 },
+ { },
+};
+
+static struct platform_driver abx500_gpio_driver = {
+ .driver = {
+ .name = "abx500-gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = abx500_gpio_match,
+ },
+ .probe = abx500_gpio_probe,
+ .remove = abx500_gpio_remove,
+ .id_table = abx500_pinctrl_id,
+};
+
+static int __init abx500_gpio_init(void)
+{
+ return platform_driver_register(&abx500_gpio_driver);
+}
+core_initcall(abx500_gpio_init);
+
+MODULE_AUTHOR("Patrice Chotard <patrice.chotard@st.com>");
+MODULE_DESCRIPTION("Driver allows to use AxB5xx unused pins to be used as GPIO");
+MODULE_ALIAS("platform:abx500-gpio");
+MODULE_LICENSE("GPL v2");