diff options
Diffstat (limited to 'drivers/pinctrl/pinctrl-exynos5440.c')
| -rw-r--r-- | drivers/pinctrl/pinctrl-exynos5440.c | 113 |
1 files changed, 61 insertions, 52 deletions
diff --git a/drivers/pinctrl/pinctrl-exynos5440.c b/drivers/pinctrl/pinctrl-exynos5440.c index 3b283fd898f..544d469c5a7 100644 --- a/drivers/pinctrl/pinctrl-exynos5440.c +++ b/drivers/pinctrl/pinctrl-exynos5440.c @@ -401,64 +401,71 @@ static const struct pinmux_ops exynos5440_pinmux_ops = { /* set the pin config settings for a specified pin */ static int exynos5440_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, - unsigned long config) + unsigned long *configs, + unsigned num_configs) { struct exynos5440_pinctrl_priv_data *priv; void __iomem *base; - enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(config); - u32 cfg_value = PINCFG_UNPACK_VALUE(config); + enum pincfg_type cfg_type; + u32 cfg_value; u32 data; + int i; priv = pinctrl_dev_get_drvdata(pctldev); base = priv->reg_base; - switch (cfg_type) { - case PINCFG_TYPE_PUD: - /* first set pull enable/disable bit */ - data = readl(base + GPIO_PE); - data &= ~(1 << pin); - if (cfg_value) - data |= (1 << pin); - writel(data, base + GPIO_PE); - - /* then set pull up/down bit */ - data = readl(base + GPIO_PS); - data &= ~(1 << pin); - if (cfg_value == 2) - data |= (1 << pin); - writel(data, base + GPIO_PS); - break; - - case PINCFG_TYPE_DRV: - /* set the first bit of the drive strength */ - data = readl(base + GPIO_DS0); - data &= ~(1 << pin); - data |= ((cfg_value & 1) << pin); - writel(data, base + GPIO_DS0); - cfg_value >>= 1; - - /* set the second bit of the driver strength */ - data = readl(base + GPIO_DS1); - data &= ~(1 << pin); - data |= ((cfg_value & 1) << pin); - writel(data, base + GPIO_DS1); - break; - case PINCFG_TYPE_SKEW_RATE: - data = readl(base + GPIO_SR); - data &= ~(1 << pin); - data |= ((cfg_value & 1) << pin); - writel(data, base + GPIO_SR); - break; - case PINCFG_TYPE_INPUT_TYPE: - data = readl(base + GPIO_TYPE); - data &= ~(1 << pin); - data |= ((cfg_value & 1) << pin); - writel(data, base + GPIO_TYPE); - break; - default: - WARN_ON(1); - return -EINVAL; - } + for (i = 0; i < num_configs; i++) { + cfg_type = PINCFG_UNPACK_TYPE(configs[i]); + cfg_value = PINCFG_UNPACK_VALUE(configs[i]); + + switch (cfg_type) { + case PINCFG_TYPE_PUD: + /* first set pull enable/disable bit */ + data = readl(base + GPIO_PE); + data &= ~(1 << pin); + if (cfg_value) + data |= (1 << pin); + writel(data, base + GPIO_PE); + + /* then set pull up/down bit */ + data = readl(base + GPIO_PS); + data &= ~(1 << pin); + if (cfg_value == 2) + data |= (1 << pin); + writel(data, base + GPIO_PS); + break; + + case PINCFG_TYPE_DRV: + /* set the first bit of the drive strength */ + data = readl(base + GPIO_DS0); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_DS0); + cfg_value >>= 1; + + /* set the second bit of the driver strength */ + data = readl(base + GPIO_DS1); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_DS1); + break; + case PINCFG_TYPE_SKEW_RATE: + data = readl(base + GPIO_SR); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_SR); + break; + case PINCFG_TYPE_INPUT_TYPE: + data = readl(base + GPIO_TYPE); + data &= ~(1 << pin); + data |= ((cfg_value & 1) << pin); + writel(data, base + GPIO_TYPE); + break; + default: + WARN_ON(1); + return -EINVAL; + } + } /* for each config */ return 0; } @@ -510,7 +517,8 @@ static int exynos5440_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, /* set the pin config settings for a specified pin group */ static int exynos5440_pinconf_group_set(struct pinctrl_dev *pctldev, - unsigned group, unsigned long config) + unsigned group, unsigned long *configs, + unsigned num_configs) { struct exynos5440_pinctrl_priv_data *priv; const unsigned int *pins; @@ -520,7 +528,8 @@ static int exynos5440_pinconf_group_set(struct pinctrl_dev *pctldev, pins = priv->pin_groups[group].pins; for (cnt = 0; cnt < priv->pin_groups[group].num_pins; cnt++) - exynos5440_pinconf_set(pctldev, pins[cnt], config); + exynos5440_pinconf_set(pctldev, pins[cnt], configs, + num_configs); return 0; } |