diff options
Diffstat (limited to 'drivers/pinctrl/pinctrl-mvebu.h')
| -rw-r--r-- | drivers/pinctrl/pinctrl-mvebu.h | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-mvebu.h b/drivers/pinctrl/pinctrl-mvebu.h new file mode 100644 index 00000000000..90bd3beee86 --- /dev/null +++ b/drivers/pinctrl/pinctrl-mvebu.h @@ -0,0 +1,192 @@ +/* + * Marvell MVEBU pinctrl driver + * + * Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __PINCTRL_MVEBU_H__ +#define __PINCTRL_MVEBU_H__ + +/** + * struct mvebu_mpp_ctrl - describe a mpp control + * @name: name of the control group + * @pid: first pin id handled by this control + * @npins: number of pins controlled by this control + * @mpp_get: (optional) special function to get mpp setting + * @mpp_set: (optional) special function to set mpp setting + * @mpp_gpio_req: (optional) special function to request gpio + * @mpp_gpio_dir: (optional) special function to set gpio direction + * + * A mpp_ctrl describes a muxable unit, e.g. pin, group of pins, or + * internal function, inside the SoC. Each muxable unit can be switched + * between two or more different settings, e.g. assign mpp pin 13 to + * uart1 or sata. + * + * If optional mpp_get/_set functions are set these are used to get/set + * a specific mode. Otherwise it is assumed that the mpp control is based + * on 4-bit groups in subsequent registers. The optional mpp_gpio_req/_dir + * functions can be used to allow pin settings with varying gpio pins. + */ +struct mvebu_mpp_ctrl { + const char *name; + u8 pid; + u8 npins; + unsigned *pins; + int (*mpp_get)(struct mvebu_mpp_ctrl *ctrl, unsigned long *config); + int (*mpp_set)(struct mvebu_mpp_ctrl *ctrl, unsigned long config); + int (*mpp_gpio_req)(struct mvebu_mpp_ctrl *ctrl, u8 pid); + int (*mpp_gpio_dir)(struct mvebu_mpp_ctrl *ctrl, u8 pid, bool input); +}; + +/** + * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting + * @val: ctrl setting value + * @name: ctrl setting name, e.g. uart2, spi0 - unique per mpp_mode + * @subname: (optional) additional ctrl setting name, e.g. rts, cts + * @variant: (optional) variant identifier mask + * @flags: (private) flags to store gpi/gpo/gpio capabilities + * + * A ctrl_setting describes a specific internal mux function that a mpp pin + * can be switched to. The value (val) will be written in the corresponding + * register for common mpp pin configuration registers on MVEBU. SoC specific + * mpp_get/_set function may use val to distinguish between different settings. + * + * The name will be used to switch to this setting in DT description, e.g. + * marvell,function = "uart2". subname is only for debugging purposes. + * + * If name is one of "gpi", "gpo", "gpio" gpio capabilities are + * parsed during initialization and stored in flags. + * + * The variant can be used to combine different revisions of one SoC to a + * common pinctrl driver. It is matched (AND) with variant of soc_info to + * determine if a setting is available on the current SoC revision. + */ +struct mvebu_mpp_ctrl_setting { + u8 val; + const char *name; + const char *subname; + u8 variant; + u8 flags; +#define MVEBU_SETTING_GPO (1 << 0) +#define MVEBU_SETTING_GPI (1 << 1) +}; + +/** + * struct mvebu_mpp_mode - link ctrl and settings + * @pid: first pin id handled by this mode + * @settings: list of settings available for this mode + * + * A mode connects all available settings with the corresponding mpp_ctrl + * given by pid. + */ +struct mvebu_mpp_mode { + u8 pid; + struct mvebu_mpp_ctrl_setting *settings; +}; + +/** + * struct mvebu_pinctrl_soc_info - SoC specific info passed to pinctrl-mvebu + * @variant: variant mask of soc_info + * @controls: list of available mvebu_mpp_ctrls + * @ncontrols: number of available mvebu_mpp_ctrls + * @modes: list of available mvebu_mpp_modes + * @nmodes: number of available mvebu_mpp_modes + * @gpioranges: list of pinctrl_gpio_ranges + * @ngpioranges: number of available pinctrl_gpio_ranges + * + * This struct describes all pinctrl related information for a specific SoC. + * If variant is unequal 0 it will be matched (AND) with variant of each + * setting and allows to distinguish between different revisions of one SoC. + */ +struct mvebu_pinctrl_soc_info { + u8 variant; + struct mvebu_mpp_ctrl *controls; + int ncontrols; + struct mvebu_mpp_mode *modes; + int nmodes; + struct pinctrl_gpio_range *gpioranges; + int ngpioranges; +}; + +#define MPP_REG_CTRL(_idl, _idh) \ + { \ + .name = NULL, \ + .pid = _idl, \ + .npins = _idh - _idl + 1, \ + .pins = (unsigned[_idh - _idl + 1]) { }, \ + .mpp_get = NULL, \ + .mpp_set = NULL, \ + .mpp_gpio_req = NULL, \ + .mpp_gpio_dir = NULL, \ + } + +#define MPP_FUNC_CTRL(_idl, _idh, _name, _func) \ + { \ + .name = _name, \ + .pid = _idl, \ + .npins = _idh - _idl + 1, \ + .pins = (unsigned[_idh - _idl + 1]) { }, \ + .mpp_get = _func ## _get, \ + .mpp_set = _func ## _set, \ + .mpp_gpio_req = NULL, \ + .mpp_gpio_dir = NULL, \ + } + +#define MPP_FUNC_GPIO_CTRL(_idl, _idh, _name, _func) \ + { \ + .name = _name, \ + .pid = _idl, \ + .npins = _idh - _idl + 1, \ + .pins = (unsigned[_idh - _idl + 1]) { }, \ + .mpp_get = _func ## _get, \ + .mpp_set = _func ## _set, \ + .mpp_gpio_req = _func ## _gpio_req, \ + .mpp_gpio_dir = _func ## _gpio_dir, \ + } + +#define _MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \ + { \ + .val = _val, \ + .name = _name, \ + .subname = _subname, \ + .variant = _mask, \ + .flags = 0, \ + } + +#if defined(CONFIG_DEBUG_FS) +#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \ + _MPP_VAR_FUNCTION(_val, _name, _subname, _mask) +#else +#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask) \ + _MPP_VAR_FUNCTION(_val, _name, NULL, _mask) +#endif + +#define MPP_FUNCTION(_val, _name, _subname) \ + MPP_VAR_FUNCTION(_val, _name, _subname, (u8)-1) + +#define MPP_MODE(_id, ...) \ + { \ + .pid = _id, \ + .settings = (struct mvebu_mpp_ctrl_setting[]){ \ + __VA_ARGS__, { } }, \ + } + +#define MPP_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins) \ + { \ + .name = "mvebu-gpio", \ + .id = _id, \ + .pin_base = _pinbase, \ + .base = _gpiobase, \ + .npins = _npins, \ + } + +int mvebu_pinctrl_probe(struct platform_device *pdev); +int mvebu_pinctrl_remove(struct platform_device *pdev); + +#endif |