diff options
Diffstat (limited to 'drivers/pinctrl/pinctrl-xway.c')
| -rw-r--r-- | drivers/pinctrl/pinctrl-xway.c | 60 |
1 files changed, 46 insertions, 14 deletions
diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c index 5f0eb04c233..53cb6a3a56e 100644 --- a/drivers/pinctrl/pinctrl-xway.c +++ b/drivers/pinctrl/pinctrl-xway.c @@ -441,17 +441,17 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev, if (port == PORT3) reg = GPIO3_OD; else - reg = GPIO_OD(port); + reg = GPIO_OD(pin); *config = LTQ_PINCONF_PACK(param, - !!gpio_getbit(info->membase[0], reg, PORT_PIN(port))); + !gpio_getbit(info->membase[0], reg, PORT_PIN(pin))); break; case LTQ_PINCONF_PARAM_PULL: if (port == PORT3) reg = GPIO3_PUDEN; else - reg = GPIO_PUDEN(port); - if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) { + reg = GPIO_PUDEN(pin); + if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) { *config = LTQ_PINCONF_PACK(param, 0); break; } @@ -459,13 +459,18 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev, if (port == PORT3) reg = GPIO3_PUDSEL; else - reg = GPIO_PUDSEL(port); - if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) + reg = GPIO_PUDSEL(pin); + if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) *config = LTQ_PINCONF_PACK(param, 2); else *config = LTQ_PINCONF_PACK(param, 1); break; + case LTQ_PINCONF_PARAM_OUTPUT: + reg = GPIO_DIR(pin); + *config = LTQ_PINCONF_PACK(param, + gpio_getbit(info->membase[0], reg, PORT_PIN(pin))); + break; default: dev_err(pctldev->dev, "Invalid config param %04x\n", param); return -ENOTSUPP; @@ -488,33 +493,44 @@ static int xway_pinconf_set(struct pinctrl_dev *pctldev, if (port == PORT3) reg = GPIO3_OD; else - reg = GPIO_OD(port); - gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + reg = GPIO_OD(pin); + if (arg == 0) + gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); + else + gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); break; case LTQ_PINCONF_PARAM_PULL: if (port == PORT3) reg = GPIO3_PUDEN; else - reg = GPIO_PUDEN(port); + reg = GPIO_PUDEN(pin); if (arg == 0) { - gpio_clearbit(info->membase[0], reg, PORT_PIN(port)); + gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); break; } - gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); if (port == PORT3) reg = GPIO3_PUDSEL; else - reg = GPIO_PUDSEL(port); + reg = GPIO_PUDSEL(pin); if (arg == 1) - gpio_clearbit(info->membase[0], reg, PORT_PIN(port)); + gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); else if (arg == 2) - gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); else dev_err(pctldev->dev, "Invalid pull value %d\n", arg); break; + case LTQ_PINCONF_PARAM_OUTPUT: + reg = GPIO_DIR(pin); + if (arg == 0) + gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); + else + gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); + break; + default: dev_err(pctldev->dev, "Invalid config param %04x\n", param); return -ENOTSUPP; @@ -522,9 +538,24 @@ static int xway_pinconf_set(struct pinctrl_dev *pctldev, return 0; } +int xway_pinconf_group_set(struct pinctrl_dev *pctldev, + unsigned selector, + unsigned long config) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); + int i, ret = 0; + + for (i = 0; i < info->grps[selector].npins && !ret; i++) + ret = xway_pinconf_set(pctldev, + info->grps[selector].pins[i], config); + + return ret; +} + static struct pinconf_ops xway_pinconf_ops = { .pin_config_get = xway_pinconf_get, .pin_config_set = xway_pinconf_set, + .pin_config_group_set = xway_pinconf_group_set, }; static struct pinctrl_desc xway_pctrl_desc = { @@ -558,6 +589,7 @@ static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, static const struct ltq_cfg_param xway_cfg_params[] = { {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN}, + {"lantiq,output", LTQ_PINCONF_PARAM_OUTPUT}, }; static struct ltq_pinmux_info xway_info = { |