diff options
Diffstat (limited to 'drivers/platform/x86/eeepc-laptop.c')
| -rw-r--r-- | drivers/platform/x86/eeepc-laptop.c | 1415 |
1 files changed, 786 insertions, 629 deletions
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index e647a856b9b..5838c69b2fb 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -1,5 +1,5 @@ /* - * eepc-laptop.c - Asus Eee PC extras + * eeepc-laptop.c - Asus Eee PC extras * * Based on asus_acpi.c as patched for the Eee PC by Asus: * ftp://ftp.asus.com/pub/ASUS/EeePC/701/ASUS_ACPI_071126.rar @@ -34,20 +34,23 @@ #include <linux/rfkill.h> #include <linux/pci.h> #include <linux/pci_hotplug.h> +#include <linux/leds.h> #define EEEPC_LAPTOP_VERSION "0.1" +#define EEEPC_LAPTOP_NAME "Eee PC Hotkey Driver" +#define EEEPC_LAPTOP_FILE "eeepc" -#define EEEPC_HOTK_NAME "Eee PC Hotkey Driver" -#define EEEPC_HOTK_FILE "eeepc" -#define EEEPC_HOTK_CLASS "hotkey" -#define EEEPC_HOTK_DEVICE_NAME "Hotkey" -#define EEEPC_HOTK_HID "ASUS010" +#define EEEPC_ACPI_CLASS "hotkey" +#define EEEPC_ACPI_DEVICE_NAME "Hotkey" +#define EEEPC_ACPI_HID "ASUS010" +MODULE_AUTHOR("Corentin Chary, Eric Cooper"); +MODULE_DESCRIPTION(EEEPC_LAPTOP_NAME); +MODULE_LICENSE("GPL"); /* * Definitions for Asus EeePC */ -#define NOTIFY_WLAN_ON 0x10 #define NOTIFY_BRN_MIN 0x20 #define NOTIFY_BRN_MAX 0x2f @@ -117,58 +120,6 @@ static const char *cm_setv[] = { NULL, NULL, "PBPS", "TPDS" }; -#define EEEPC_EC "\\_SB.PCI0.SBRG.EC0." - -#define EEEPC_EC_FAN_PWM EEEPC_EC "SC02" /* Fan PWM duty cycle (%) */ -#define EEEPC_EC_SC02 0x63 -#define EEEPC_EC_FAN_HRPM EEEPC_EC "SC05" /* High byte, fan speed (RPM) */ -#define EEEPC_EC_FAN_LRPM EEEPC_EC "SC06" /* Low byte, fan speed (RPM) */ -#define EEEPC_EC_FAN_CTRL EEEPC_EC "SFB3" /* Byte containing SF25 */ -#define EEEPC_EC_SFB3 0xD3 - -/* - * This is the main structure, we can use it to store useful information - * about the hotk device - */ -struct eeepc_hotk { - struct acpi_device *device; /* the device we are in */ - acpi_handle handle; /* the handle of the hotk device */ - u32 cm_supported; /* the control methods supported - by this BIOS */ - uint init_flag; /* Init flags */ - u16 event_count[128]; /* count for each event */ - struct input_dev *inputdev; - u16 *keycode_map; - struct rfkill *wlan_rfkill; - struct rfkill *bluetooth_rfkill; - struct rfkill *wwan3g_rfkill; - struct rfkill *wimax_rfkill; - struct hotplug_slot *hotplug_slot; - struct mutex hotplug_lock; -}; - -/* The actual device the driver binds to */ -static struct eeepc_hotk *ehotk; - -/* Platform device/driver */ -static int eeepc_hotk_thaw(struct device *device); -static int eeepc_hotk_restore(struct device *device); - -static const struct dev_pm_ops eeepc_pm_ops = { - .thaw = eeepc_hotk_thaw, - .restore = eeepc_hotk_restore, -}; - -static struct platform_driver platform_driver = { - .driver = { - .name = EEEPC_HOTK_FILE, - .owner = THIS_MODULE, - .pm = &eeepc_pm_ops, - } -}; - -static struct platform_device *platform_device; - struct key_entry { char type; u8 code; @@ -177,7 +128,7 @@ struct key_entry { enum { KE_KEY, KE_END }; -static struct key_entry eeepc_keymap[] = { +static const struct key_entry eeepc_keymap[] = { /* Sleep already handled via generic ACPI code */ {KE_KEY, 0x10, KEY_WLAN }, {KE_KEY, 0x11, KEY_WLAN }, @@ -185,77 +136,56 @@ static struct key_entry eeepc_keymap[] = { {KE_KEY, 0x13, KEY_MUTE }, {KE_KEY, 0x14, KEY_VOLUMEDOWN }, {KE_KEY, 0x15, KEY_VOLUMEUP }, + {KE_KEY, 0x16, KEY_DISPLAY_OFF }, {KE_KEY, 0x1a, KEY_COFFEE }, {KE_KEY, 0x1b, KEY_ZOOM }, {KE_KEY, 0x1c, KEY_PROG2 }, {KE_KEY, 0x1d, KEY_PROG3 }, - {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN }, - {KE_KEY, NOTIFY_BRN_MIN + 2, KEY_BRIGHTNESSUP }, + {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN }, + {KE_KEY, NOTIFY_BRN_MAX, KEY_BRIGHTNESSUP }, {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE }, {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE }, {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE }, + {KE_KEY, 0x37, KEY_F13 }, /* Disable Touchpad */ + {KE_KEY, 0x38, KEY_F14 }, {KE_END, 0}, }; + /* - * The hotkey driver declaration + * This is the main structure, we can use it to store useful information */ -static int eeepc_hotk_add(struct acpi_device *device); -static int eeepc_hotk_remove(struct acpi_device *device, int type); -static void eeepc_hotk_notify(struct acpi_device *device, u32 event); - -static const struct acpi_device_id eeepc_device_ids[] = { - {EEEPC_HOTK_HID, 0}, - {"", 0}, -}; -MODULE_DEVICE_TABLE(acpi, eeepc_device_ids); - -static struct acpi_driver eeepc_hotk_driver = { - .name = EEEPC_HOTK_NAME, - .class = EEEPC_HOTK_CLASS, - .ids = eeepc_device_ids, - .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, - .ops = { - .add = eeepc_hotk_add, - .remove = eeepc_hotk_remove, - .notify = eeepc_hotk_notify, - }, -}; +struct eeepc_laptop { + acpi_handle handle; /* the handle of the acpi device */ + u32 cm_supported; /* the control methods supported + by this BIOS */ + u16 event_count[128]; /* count for each event */ -/* PCI hotplug ops */ -static int eeepc_get_adapter_status(struct hotplug_slot *slot, u8 *value); + struct platform_device *platform_device; + struct device *hwmon_device; + struct backlight_device *backlight_device; -static struct hotplug_slot_ops eeepc_hotplug_slot_ops = { - .owner = THIS_MODULE, - .get_adapter_status = eeepc_get_adapter_status, - .get_power_status = eeepc_get_adapter_status, -}; + struct input_dev *inputdev; + struct key_entry *keymap; -/* The backlight device /sys/class/backlight */ -static struct backlight_device *eeepc_backlight_device; + struct rfkill *wlan_rfkill; + struct rfkill *bluetooth_rfkill; + struct rfkill *wwan3g_rfkill; + struct rfkill *wimax_rfkill; -/* The hwmon device */ -static struct device *eeepc_hwmon_device; + struct hotplug_slot *hotplug_slot; + struct mutex hotplug_lock; -/* - * The backlight class declaration - */ -static int read_brightness(struct backlight_device *bd); -static int update_bl_status(struct backlight_device *bd); -static struct backlight_ops eeepcbl_ops = { - .get_brightness = read_brightness, - .update_status = update_bl_status, + struct led_classdev tpd_led; + int tpd_led_wk; + struct workqueue_struct *led_workqueue; + struct work_struct tpd_led_work; }; -MODULE_AUTHOR("Corentin Chary, Eric Cooper"); -MODULE_DESCRIPTION(EEEPC_HOTK_NAME); -MODULE_LICENSE("GPL"); - /* * ACPI Helpers */ -static int write_acpi_int(acpi_handle handle, const char *method, int val, - struct acpi_buffer *output) +static int write_acpi_int(acpi_handle handle, const char *method, int val) { struct acpi_object_list params; union acpi_object in_obj; @@ -266,7 +196,7 @@ static int write_acpi_int(acpi_handle handle, const char *method, int val, in_obj.type = ACPI_TYPE_INTEGER; in_obj.integer.value = val; - status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); + status = acpi_evaluate_object(handle, (char *)method, ¶ms, NULL); return (status == AE_OK ? 0 : -1); } @@ -285,81 +215,56 @@ static int read_acpi_int(acpi_handle handle, const char *method, int *val) } } -static int set_acpi(int cm, int value) +static int set_acpi(struct eeepc_laptop *eeepc, int cm, int value) { - if (ehotk->cm_supported & (0x1 << cm)) { - const char *method = cm_setv[cm]; - if (method == NULL) - return -ENODEV; - if (write_acpi_int(ehotk->handle, method, value, NULL)) - pr_warning("Error writing %s\n", method); - } - return 0; -} + const char *method = cm_setv[cm]; -static int get_acpi(int cm) -{ - int value = -ENODEV; - if ((ehotk->cm_supported & (0x1 << cm))) { - const char *method = cm_getv[cm]; - if (method == NULL) - return -ENODEV; - if (read_acpi_int(ehotk->handle, method, &value)) - pr_warning("Error reading %s\n", method); - } - return value; -} - -/* - * Backlight - */ -static int read_brightness(struct backlight_device *bd) -{ - return get_acpi(CM_ASL_PANELBRIGHT); -} + if (method == NULL) + return -ENODEV; + if ((eeepc->cm_supported & (0x1 << cm)) == 0) + return -ENODEV; -static int set_brightness(struct backlight_device *bd, int value) -{ - value = max(0, min(15, value)); - return set_acpi(CM_ASL_PANELBRIGHT, value); + if (write_acpi_int(eeepc->handle, method, value)) + pr_warning("Error writing %s\n", method); + return 0; } -static int update_bl_status(struct backlight_device *bd) +static int get_acpi(struct eeepc_laptop *eeepc, int cm) { - return set_brightness(bd, bd->props.brightness); -} + const char *method = cm_getv[cm]; + int value; -/* - * Rfkill helpers - */ + if (method == NULL) + return -ENODEV; + if ((eeepc->cm_supported & (0x1 << cm)) == 0) + return -ENODEV; -static bool eeepc_wlan_rfkill_blocked(void) -{ - if (get_acpi(CM_ASL_WLAN) == 1) - return false; - return true; + if (read_acpi_int(eeepc->handle, method, &value)) + pr_warning("Error reading %s\n", method); + return value; } -static int eeepc_rfkill_set(void *data, bool blocked) +static int acpi_setter_handle(struct eeepc_laptop *eeepc, int cm, + acpi_handle *handle) { - unsigned long asl = (unsigned long)data; - return set_acpi(asl, !blocked); -} + const char *method = cm_setv[cm]; + acpi_status status; -static const struct rfkill_ops eeepc_rfkill_ops = { - .set_block = eeepc_rfkill_set, -}; + if (method == NULL) + return -ENODEV; + if ((eeepc->cm_supported & (0x1 << cm)) == 0) + return -ENODEV; -static void __devinit eeepc_enable_camera(void) -{ - /* - * If the following call to set_acpi() fails, it's because there's no - * camera so we can ignore the error. - */ - if (get_acpi(CM_ASL_CAMERA) == 0) - set_acpi(CM_ASL_CAMERA, 1); + status = acpi_get_handle(eeepc->handle, (char *)method, + handle); + if (status != AE_OK) { + pr_warning("Error finding %s\n", method); + return -ENODEV; + } + return 0; } + /* * Sys helpers */ @@ -372,60 +277,63 @@ static int parse_arg(const char *buf, unsigned long count, int *val) return count; } -static ssize_t store_sys_acpi(int cm, const char *buf, size_t count) +static ssize_t store_sys_acpi(struct device *dev, int cm, + const char *buf, size_t count) { + struct eeepc_laptop *eeepc = dev_get_drvdata(dev); int rv, value; rv = parse_arg(buf, count, &value); if (rv > 0) - value = set_acpi(cm, value); + value = set_acpi(eeepc, cm, value); if (value < 0) - return value; + return -EIO; return rv; } -static ssize_t show_sys_acpi(int cm, char *buf) +static ssize_t show_sys_acpi(struct device *dev, int cm, char *buf) { - int value = get_acpi(cm); + struct eeepc_laptop *eeepc = dev_get_drvdata(dev); + int value = get_acpi(eeepc, cm); if (value < 0) - return value; + return -EIO; return sprintf(buf, "%d\n", value); } -#define EEEPC_CREATE_DEVICE_ATTR(_name, _cm) \ +#define EEEPC_CREATE_DEVICE_ATTR(_name, _mode, _cm) \ static ssize_t show_##_name(struct device *dev, \ struct device_attribute *attr, \ char *buf) \ { \ - return show_sys_acpi(_cm, buf); \ + return show_sys_acpi(dev, _cm, buf); \ } \ static ssize_t store_##_name(struct device *dev, \ struct device_attribute *attr, \ const char *buf, size_t count) \ { \ - return store_sys_acpi(_cm, buf, count); \ + return store_sys_acpi(dev, _cm, buf, count); \ } \ static struct device_attribute dev_attr_##_name = { \ .attr = { \ .name = __stringify(_name), \ - .mode = 0644 }, \ + .mode = _mode }, \ .show = show_##_name, \ .store = store_##_name, \ } -EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA); -EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER); -EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH); +EEEPC_CREATE_DEVICE_ATTR(camera, 0644, CM_ASL_CAMERA); +EEEPC_CREATE_DEVICE_ATTR(cardr, 0644, CM_ASL_CARDREADER); +EEEPC_CREATE_DEVICE_ATTR(disp, 0200, CM_ASL_DISPLAYSWITCH); struct eeepc_cpufv { int num; int cur; }; -static int get_cpufv(struct eeepc_cpufv *c) +static int get_cpufv(struct eeepc_laptop *eeepc, struct eeepc_cpufv *c) { - c->cur = get_acpi(CM_ASL_CPUFV); + c->cur = get_acpi(eeepc, CM_ASL_CPUFV); c->num = (c->cur >> 8) & 0xff; c->cur &= 0xff; if (c->cur < 0 || c->num <= 0 || c->num > 12) @@ -437,11 +345,12 @@ static ssize_t show_available_cpufv(struct device *dev, struct device_attribute *attr, char *buf) { + struct eeepc_laptop *eeepc = dev_get_drvdata(dev); struct eeepc_cpufv c; int i; ssize_t len = 0; - if (get_cpufv(&c)) + if (get_cpufv(eeepc, &c)) return -ENODEV; for (i = 0; i < c.num; i++) len += sprintf(buf + len, "%d ", i); @@ -453,9 +362,10 @@ static ssize_t show_cpufv(struct device *dev, struct device_attribute *attr, char *buf) { + struct eeepc_laptop *eeepc = dev_get_drvdata(dev); struct eeepc_cpufv c; - if (get_cpufv(&c)) + if (get_cpufv(eeepc, &c)) return -ENODEV; return sprintf(buf, "%#x\n", (c.num << 8) | c.cur); } @@ -464,17 +374,18 @@ static ssize_t store_cpufv(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { + struct eeepc_laptop *eeepc = dev_get_drvdata(dev); struct eeepc_cpufv c; int rv, value; - if (get_cpufv(&c)) + if (get_cpufv(eeepc, &c)) return -ENODEV; rv = parse_arg(buf, count, &value); if (rv < 0) return rv; if (!rv || value < 0 || value >= c.num) return -EINVAL; - set_acpi(CM_ASL_CPUFV, value); + set_acpi(eeepc, CM_ASL_CPUFV, value); return rv; } @@ -506,156 +417,125 @@ static struct attribute_group platform_attribute_group = { .attrs = platform_attributes }; -/* - * Hotkey functions - */ -static struct key_entry *eepc_get_entry_by_scancode(int code) +static int eeepc_platform_init(struct eeepc_laptop *eeepc) { - struct key_entry *key; - - for (key = eeepc_keymap; key->type != KE_END; key++) - if (code == key->code) - return key; + int result; - return NULL; -} + eeepc->platform_device = platform_device_alloc(EEEPC_LAPTOP_FILE, -1); + if (!eeepc->platform_device) + return -ENOMEM; + platform_set_drvdata(eeepc->platform_device, eeepc); -static struct key_entry *eepc_get_entry_by_keycode(int code) -{ - struct key_entry *key; + result = platform_device_add(eeepc->platform_device); + if (result) + goto fail_platform_device; - for (key = eeepc_keymap; key->type != KE_END; key++) - if (code == key->keycode && key->type == KE_KEY) - return key; + result = sysfs_create_group(&eeepc->platform_device->dev.kobj, + &platform_attribute_group); + if (result) + goto fail_sysfs; + return 0; - return NULL; +fail_sysfs: + platform_device_del(eeepc->platform_device); +fail_platform_device: + platform_device_put(eeepc->platform_device); + return result; } -static int eeepc_getkeycode(struct input_dev *dev, int scancode, int *keycode) +static void eeepc_platform_exit(struct eeepc_laptop *eeepc) { - struct key_entry *key = eepc_get_entry_by_scancode(scancode); + sysfs_remove_group(&eeepc->platform_device->dev.kobj, + &platform_attribute_group); + platform_device_unregister(eeepc->platform_device); +} - if (key && key->type == KE_KEY) { - *keycode = key->keycode; - return 0; - } +/* + * LEDs + */ +/* + * These functions actually update the LED's, and are called from a + * workqueue. By doing this as separate work rather than when the LED + * subsystem asks, we avoid messing with the Asus ACPI stuff during a + * potentially bad time, such as a timer interrupt. + */ +static void tpd_led_update(struct work_struct *work) + { + struct eeepc_laptop *eeepc; - return -EINVAL; + eeepc = container_of(work, struct eeepc_laptop, tpd_led_work); + + set_acpi(eeepc, CM_ASL_TPD, eeepc->tpd_led_wk); } -static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode) +static void tpd_led_set(struct led_classdev *led_cdev, + enum led_brightness value) { - struct key_entry *key; - int old_keycode; + struct eeepc_laptop *eeepc; - if (keycode < 0 || keycode > KEY_MAX) - return -EINVAL; + eeepc = container_of(led_cdev, struct eeepc_laptop, tpd_led); - key = eepc_get_entry_by_scancode(scancode); - if (key && key->type == KE_KEY) { - old_keycode = key->keycode; - key->keycode = keycode; - set_bit(keycode, dev->keybit); - if (!eepc_get_entry_by_keycode(old_keycode)) - clear_bit(old_keycode, dev->keybit); - return 0; - } - - return -EINVAL; + eeepc->tpd_led_wk = (value > 0) ? 1 : 0; + queue_work(eeepc->led_workqueue, &eeepc->tpd_led_work); } -static void cmsg_quirk(int cm, const char *name) +static int eeepc_led_init(struct eeepc_laptop *eeepc) { - int dummy; + int rv; - /* Some BIOSes do not report cm although it is avaliable. - Check if cm_getv[cm] works and, if yes, assume cm should be set. */ - if (!(ehotk->cm_supported & (1 << cm)) - && !read_acpi_int(ehotk->handle, cm_getv[cm], &dummy)) { - pr_info("%s (%x) not reported by BIOS," - " enabling anyway\n", name, 1 << cm); - ehotk->cm_supported |= 1 << cm; - } -} + if (get_acpi(eeepc, CM_ASL_TPD) == -ENODEV) + return 0; -static void cmsg_quirks(void) -{ - cmsg_quirk(CM_ASL_LID, "LID"); - cmsg_quirk(CM_ASL_TYPE, "TYPE"); - cmsg_quirk(CM_ASL_PANELPOWER, "PANELPOWER"); - cmsg_quirk(CM_ASL_TPD, "TPD"); -} + eeepc->led_workqueue = create_singlethread_workqueue("led_workqueue"); + if (!eeepc->led_workqueue) + return -ENOMEM; + INIT_WORK(&eeepc->tpd_led_work, tpd_led_update); -static int eeepc_hotk_check(void) -{ - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - int result; + eeepc->tpd_led.name = "eeepc::touchpad"; + eeepc->tpd_led.brightness_set = tpd_led_set; + eeepc->tpd_led.max_brightness = 1; - result = acpi_bus_get_status(ehotk->device); - if (result) - return result; - if (ehotk->device->status.present) { - if (write_acpi_int(ehotk->handle, "INIT", ehotk->init_flag, - &buffer)) { - pr_err("Hotkey initialization failed\n"); - return -ENODEV; - } else { - pr_notice("Hotkey init flags 0x%x\n", ehotk->init_flag); - } - /* get control methods supported */ - if (read_acpi_int(ehotk->handle, "CMSG" - , &ehotk->cm_supported)) { - pr_err("Get control methods supported failed\n"); - return -ENODEV; - } else { - cmsg_quirks(); - pr_info("Get control methods supported: 0x%x\n", - ehotk->cm_supported); - } - } else { - pr_err("Hotkey device not present, aborting\n"); - return -EINVAL; + rv = led_classdev_register(&eeepc->platform_device->dev, + &eeepc->tpd_led); + if (rv) { + destroy_workqueue(eeepc->led_workqueue); + return rv; } + return 0; } -static int notify_brn(void) +static void eeepc_led_exit(struct eeepc_laptop *eeepc) { - /* returns the *previous* brightness, or -1 */ - struct backlight_device *bd = eeepc_backlight_device; - if (bd) { - int old = bd->props.brightness; - backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY); - return old; - } - return -1; + if (eeepc->tpd_led.dev) + led_classdev_unregister(&eeepc->tpd_led); + if (eeepc->led_workqueue) + destroy_workqueue(eeepc->led_workqueue); } -static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, - u8 *value) -{ - int val = get_acpi(CM_ASL_WLAN); - if (val == 1 || val == 0) - *value = val; - else - return -EINVAL; - - return 0; +/* + * PCI hotplug (for wlan rfkill) + */ +static bool eeepc_wlan_rfkill_blocked(struct eeepc_laptop *eeepc) +{ + if (get_acpi(eeepc, CM_ASL_WLAN) == 1) + return false; + return true; } -static void eeepc_rfkill_hotplug(void) +static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc) { struct pci_dev *dev; struct pci_bus *bus; - bool blocked = eeepc_wlan_rfkill_blocked(); + bool blocked = eeepc_wlan_rfkill_blocked(eeepc); - if (ehotk->wlan_rfkill) - rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); + if (eeepc->wlan_rfkill) + rfkill_set_sw_state(eeepc->wlan_rfkill, blocked); - mutex_lock(&ehotk->hotplug_lock); + mutex_lock(&eeepc->hotplug_lock); - if (ehotk->hotplug_slot) { + if (eeepc->hotplug_slot) { bus = pci_find_bus(0, 1); if (!bus) { pr_warning("Unable to find PCI bus 1?\n"); @@ -685,69 +565,23 @@ static void eeepc_rfkill_hotplug(void) } out_unlock: - mutex_unlock(&ehotk->hotplug_lock); + mutex_unlock(&eeepc->hotplug_lock); } static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) { + struct eeepc_laptop *eeepc = data; + if (event != ACPI_NOTIFY_BUS_CHECK) return; - eeepc_rfkill_hotplug(); + eeepc_rfkill_hotplug(eeepc); } -static void eeepc_hotk_notify(struct acpi_device *device, u32 event) +static int eeepc_register_rfkill_notifier(struct eeepc_laptop *eeepc, + char *node) { - static struct key_entry *key; - u16 count; - int brn = -ENODEV; - - if (!ehotk) - return; - if (event > ACPI_MAX_SYS_NOTIFY) - return; - if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX) - brn = notify_brn(); - count = ehotk->event_count[event % 128]++; - acpi_bus_generate_proc_event(ehotk->device, event, count); - acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class, - dev_name(&ehotk->device->dev), event, - count); - if (ehotk->inputdev) { - if (brn != -ENODEV) { - /* brightness-change events need special - * handling for conversion to key events - */ - if (brn < 0) - brn = event; - else - brn += NOTIFY_BRN_MIN; - if (event < brn) - event = NOTIFY_BRN_MIN; /* brightness down */ - else if (event > brn) - event = NOTIFY_BRN_MIN + 2; /* ... up */ - else - event = NOTIFY_BRN_MIN + 1; /* ... unchanged */ - } - key = eepc_get_entry_by_scancode(event); - if (key) { - switch (key->type) { - case KE_KEY: - input_report_key(ehotk->inputdev, key->keycode, - 1); - input_sync(ehotk->inputdev); - input_report_key(ehotk->inputdev, key->keycode, - 0); - input_sync(ehotk->inputdev); - break; - } - } - } -} - -static int eeepc_register_rfkill_notifier(char *node) -{ - acpi_status status = AE_OK; + acpi_status status; acpi_handle handle; status = acpi_get_handle(NULL, node, &handle); @@ -756,7 +590,7 @@ static int eeepc_register_rfkill_notifier(char *node) status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, eeepc_rfkill_notify, - NULL); + eeepc); if (ACPI_FAILURE(status)) pr_warning("Failed to register notify on %s\n", node); } else @@ -765,7 +599,8 @@ static int eeepc_register_rfkill_notifier(char *node) return 0; } -static void eeepc_unregister_rfkill_notifier(char *node) +static void eeepc_unregister_rfkill_notifier(struct eeepc_laptop *eeepc, + char *node) { acpi_status status = AE_OK; acpi_handle handle; @@ -782,13 +617,33 @@ static void eeepc_unregister_rfkill_notifier(char *node) } } +static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, + u8 *value) +{ + struct eeepc_laptop *eeepc = hotplug_slot->private; + int val = get_acpi(eeepc, CM_ASL_WLAN); + + if (val == 1 || val == 0) + *value = val; + else + return -EINVAL; + + return 0; +} + static void eeepc_cleanup_pci_hotplug(struct hotplug_slot *hotplug_slot) { kfree(hotplug_slot->info); kfree(hotplug_slot); } -static int eeepc_setup_pci_hotplug(void) +static struct hotplug_slot_ops eeepc_hotplug_slot_ops = { + .owner = THIS_MODULE, + .get_adapter_status = eeepc_get_adapter_status, + .get_power_status = eeepc_get_adapter_status, +}; + +static int eeepc_setup_pci_hotplug(struct eeepc_laptop *eeepc) { int ret = -ENOMEM; struct pci_bus *bus = pci_find_bus(0, 1); @@ -798,22 +653,22 @@ static int eeepc_setup_pci_hotplug(void) return -ENODEV; } - ehotk->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL); - if (!ehotk->hotplug_slot) + eeepc->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL); + if (!eeepc->hotplug_slot) goto error_slot; - ehotk->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info), + eeepc->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL); - if (!ehotk->hotplug_slot->info) + if (!eeepc->hotplug_slot->info) goto error_info; - ehotk->hotplug_slot->private = ehotk; - ehotk->hotplug_slot->release = &eeepc_cleanup_pci_hotplug; - ehotk->hotplug_slot->ops = &eeepc_hotplug_slot_ops; - eeepc_get_adapter_status(ehotk->hotplug_slot, - &ehotk->hotplug_slot->info->adapter_status); + eeepc->hotplug_slot->private = eeepc; + eeepc->hotplug_slot->release = &eeepc_cleanup_pci_hotplug; + eeepc->hotplug_slot->ops = &eeepc_hotplug_slot_ops; + eeepc_get_adapter_status(eeepc->hotplug_slot, + &eeepc->hotplug_slot->info->adapter_status); - ret = pci_hp_register(ehotk->hotplug_slot, bus, 0, "eeepc-wifi"); + ret = pci_hp_register(eeepc->hotplug_slot, bus, 0, "eeepc-wifi"); if (ret) { pr_err("Unable to register hotplug slot - %d\n", ret); goto error_register; @@ -822,17 +677,156 @@ static int eeepc_setup_pci_hotplug(void) return 0; error_register: - kfree(ehotk->hotplug_slot->info); + kfree(eeepc->hotplug_slot->info); error_info: - kfree(ehotk->hotplug_slot); - ehotk->hotplug_slot = NULL; + kfree(eeepc->hotplug_slot); + eeepc->hotplug_slot = NULL; error_slot: return ret; } +/* + * Rfkill devices + */ +static int eeepc_rfkill_set(void *data, bool blocked) +{ + acpi_handle handle = data; + + return write_acpi_int(handle, NULL, !blocked); +} + +static const struct rfkill_ops eeepc_rfkill_ops = { + .set_block = eeepc_rfkill_set, +}; + +static int eeepc_new_rfkill(struct eeepc_laptop *eeepc, + struct rfkill **rfkill, + const char *name, + enum rfkill_type type, int cm) +{ + acpi_handle handle; + int result; + + result = acpi_setter_handle(eeepc, cm, &handle); + if (result < 0) + return result; + + *rfkill = rfkill_alloc(name, &eeepc->platform_device->dev, type, + &eeepc_rfkill_ops, handle); + + if (!*rfkill) + return -EINVAL; + + rfkill_init_sw_state(*rfkill, get_acpi(eeepc, cm) != 1); + result = rfkill_register(*rfkill); + if (result) { + rfkill_destroy(*rfkill); + *rfkill = NULL; + return result; + } + return 0; +} + +static void eeepc_rfkill_exit(struct eeepc_laptop *eeepc) +{ + eeepc_unregister_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P5"); + eeepc_unregister_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P6"); + eeepc_unregister_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P7"); + if (eeepc->wlan_rfkill) { + rfkill_unregister(eeepc->wlan_rfkill); + rfkill_destroy(eeepc->wlan_rfkill); + eeepc->wlan_rfkill = NULL; + } + /* + * Refresh pci hotplug in case the rfkill state was changed after + * eeepc_unregister_rfkill_notifier() + */ + eeepc_rfkill_hotplug(eeepc); + if (eeepc->hotplug_slot) + pci_hp_deregister(eeepc->hotplug_slot); + + if (eeepc->bluetooth_rfkill) { + rfkill_unregister(eeepc->bluetooth_rfkill); + rfkill_destroy(eeepc->bluetooth_rfkill); + eeepc->bluetooth_rfkill = NULL; + } + if (eeepc->wwan3g_rfkill) { + rfkill_unregister(eeepc->wwan3g_rfkill); + rfkill_destroy(eeepc->wwan3g_rfkill); + eeepc->wwan3g_rfkill = NULL; + } + if (eeepc->wimax_rfkill) { + rfkill_unregister(eeepc->wimax_rfkill); + rfkill_destroy(eeepc->wimax_rfkill); + eeepc->wimax_rfkill = NULL; + } +} + +static int eeepc_rfkill_init(struct eeepc_laptop *eeepc) +{ + int result = 0; + + mutex_init(&eeepc->hotplug_lock); + + result = eeepc_new_rfkill(eeepc, &eeepc->wlan_rfkill, + "eeepc-wlan", RFKILL_TYPE_WLAN, + CM_ASL_WLAN); + + if (result && result != -ENODEV) + goto exit; + + result = eeepc_new_rfkill(eeepc, &eeepc->bluetooth_rfkill, + "eeepc-bluetooth", RFKILL_TYPE_BLUETOOTH, + CM_ASL_BLUETOOTH); + + if (result && result != -ENODEV) + goto exit; + + result = eeepc_new_rfkill(eeepc, &eeepc->wwan3g_rfkill, + "eeepc-wwan3g", RFKILL_TYPE_WWAN, + CM_ASL_3G); + + if (result && result != -ENODEV) + goto exit; + + result = eeepc_new_rfkill(eeepc, &eeepc->wimax_rfkill, + "eeepc-wimax", RFKILL_TYPE_WIMAX, + CM_ASL_WIMAX); + + if (result && result != -ENODEV) + goto exit; + + result = eeepc_setup_pci_hotplug(eeepc); + /* + * If we get -EBUSY then something else is handling the PCI hotplug - + * don't fail in this case + */ + if (result == -EBUSY) + result = 0; + + eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P5"); + eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P6"); + eeepc_register_rfkill_notifier(eeepc, "\\_SB.PCI0.P0P7"); + /* + * Refresh pci hotplug in case the rfkill state was changed during + * setup. + */ + eeepc_rfkill_hotplug(eeepc); + +exit: + if (result && result != -ENODEV) + eeepc_rfkill_exit(eeepc); + return result; +} + +/* + * Platform driver - hibernate/resume callbacks + */ static int eeepc_hotk_thaw(struct device *device) { - if (ehotk->wlan_rfkill) { + struct eeepc_laptop *eeepc = dev_get_drvdata(device); + + if (eeepc->wlan_rfkill) { bool wlan; /* @@ -840,8 +834,8 @@ static int eeepc_hotk_thaw(struct device *device) * during suspend. Normally it restores it on resume, but * we should kick it ourselves in case hibernation is aborted. */ - wlan = get_acpi(CM_ASL_WLAN); - set_acpi(CM_ASL_WLAN, wlan); + wlan = get_acpi(eeepc, CM_ASL_WLAN); + set_acpi(eeepc, CM_ASL_WLAN, wlan); } return 0; @@ -849,70 +843,96 @@ static int eeepc_hotk_thaw(struct device *device) static int eeepc_hotk_restore(struct device *device) { + struct eeepc_laptop *eeepc = dev_get_drvdata(device); + /* Refresh both wlan rfkill state and pci hotplug */ - if (ehotk->wlan_rfkill) - eeepc_rfkill_hotplug(); - - if (ehotk->bluetooth_rfkill) - rfkill_set_sw_state(ehotk->bluetooth_rfkill, - get_acpi(CM_ASL_BLUETOOTH) != 1); - if (ehotk->wwan3g_rfkill) - rfkill_set_sw_state(ehotk->wwan3g_rfkill, - get_acpi(CM_ASL_3G) != 1); - if (ehotk->wimax_rfkill) - rfkill_set_sw_state(ehotk->wimax_rfkill, - get_acpi(CM_ASL_WIMAX) != 1); + if (eeepc->wlan_rfkill) + eeepc_rfkill_hotplug(eeepc); + + if (eeepc->bluetooth_rfkill) + rfkill_set_sw_state(eeepc->bluetooth_rfkill, + get_acpi(eeepc, CM_ASL_BLUETOOTH) != 1); + if (eeepc->wwan3g_rfkill) + rfkill_set_sw_state(eeepc->wwan3g_rfkill, + get_acpi(eeepc, CM_ASL_3G) != 1); + if (eeepc->wimax_rfkill) + rfkill_set_sw_state(eeepc->wimax_rfkill, + get_acpi(eeepc, CM_ASL_WIMAX) != 1); return 0; } +static const struct dev_pm_ops eeepc_pm_ops = { + .thaw = eeepc_hotk_thaw, + .restore = eeepc_hotk_restore, +}; + +static struct platform_driver platform_driver = { + .driver = { + .name = EEEPC_LAPTOP_FILE, + .owner = THIS_MODULE, + .pm = &eeepc_pm_ops, + } +}; + /* - * Hwmon + * Hwmon device */ + +#define EEEPC_EC_SC00 0x61 +#define EEEPC_EC_FAN_PWM (EEEPC_EC_SC00 + 2) /* Fan PWM duty cycle (%) */ +#define EEEPC_EC_FAN_HRPM (EEEPC_EC_SC00 + 5) /* High byte, fan speed (RPM) */ +#define EEEPC_EC_FAN_LRPM (EEEPC_EC_SC00 + 6) /* Low byte, fan speed (RPM) */ + +#define EEEPC_EC_SFB0 0xD0 +#define EEEPC_EC_FAN_CTRL (EEEPC_EC_SFB0 + 3) /* Byte containing SF25 */ + static int eeepc_get_fan_pwm(void) { - int value = 0; + u8 value = 0; - read_acpi_int(NULL, EEEPC_EC_FAN_PWM, &value); - value = value * 255 / 100; - return (value); + ec_read(EEEPC_EC_FAN_PWM, &value); + return value * 255 / 100; } static void eeepc_set_fan_pwm(int value) { value = SENSORS_LIMIT(value, 0, 255); value = value * 100 / 255; - ec_write(EEEPC_EC_SC02, value); + ec_write(EEEPC_EC_FAN_PWM, value); } static int eeepc_get_fan_rpm(void) { - int high = 0; - int low = 0; + u8 high = 0; + u8 low = 0; - read_acpi_int(NULL, EEEPC_EC_FAN_HRPM, &high); - read_acpi_int(NULL, EEEPC_EC_FAN_LRPM, &low); - return (high << 8 | low); + ec_read(EEEPC_EC_FAN_HRPM, &high); + ec_read(EEEPC_EC_FAN_LRPM, &low); + return high << 8 | low; } static int eeepc_get_fan_ctrl(void) { - int value = 0; + u8 value = 0; - read_acpi_int(NULL, EEEPC_EC_FAN_CTRL, &value); - return ((value & 0x02 ? 1 : 0)); + ec_read(EEEPC_EC_FAN_CTRL, &value); + if (value & 0x02) + return 1; /* manual */ + else + return 2; /* automatic */ } static void eeepc_set_fan_ctrl(int manual) { - int value = 0; + u8 value = 0; - read_acpi_int(NULL, EEEPC_EC_FAN_CTRL, &value); - if (manual) + ec_read(EEEPC_EC_FAN_CTRL, &value); + if (manual == 1) value |= 0x02; else value &= ~0x02; - ec_write(EEEPC_EC_SFB3, value); + ec_write(EEEPC_EC_FAN_CTRL, value); } static ssize_t store_sys_hwmon(void (*set)(int), const char *buf, size_t count) @@ -970,348 +990,485 @@ static struct attribute_group hwmon_attribute_group = { .attrs = hwmon_attributes }; -/* - * exit/init - */ -static void eeepc_backlight_exit(void) +static void eeepc_hwmon_exit(struct eeepc_laptop *eeepc) { - if (eeepc_backlight_device) - backlight_device_unregister(eeepc_backlight_device); - eeepc_backlight_device = NULL; + struct device *hwmon; + + hwmon = eeepc->hwmon_device; + if (!hwmon) + return; + sysfs_remove_group(&hwmon->kobj, + &hwmon_attribute_group); + hwmon_device_unregister(hwmon); + eeepc->hwmon_device = NULL; } -static void eeepc_rfkill_exit(void) +static int eeepc_hwmon_init(struct eeepc_laptop *eeepc) { - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P5"); - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); - if (ehotk->wlan_rfkill) { - rfkill_unregister(ehotk->wlan_rfkill); - rfkill_destroy(ehotk->wlan_rfkill); - ehotk->wlan_rfkill = NULL; - } - /* - * Refresh pci hotplug in case the rfkill state was changed after - * eeepc_unregister_rfkill_notifier() - */ - eeepc_rfkill_hotplug(); - if (ehotk->hotplug_slot) - pci_hp_deregister(ehotk->hotplug_slot); - - if (ehotk->bluetooth_rfkill) { - rfkill_unregister(ehotk->bluetooth_rfkill); - rfkill_destroy(ehotk->bluetooth_rfkill); - ehotk->bluetooth_rfkill = NULL; - } - if (ehotk->wwan3g_rfkill) { - rfkill_unregister(ehotk->wwan3g_rfkill); - rfkill_destroy(ehotk->wwan3g_rfkill); - ehotk->wwan3g_rfkill = NULL; - } - if (ehotk->wimax_rfkill) { - rfkill_unregister(ehotk->wimax_rfkill); - rfkill_destroy(ehotk->wimax_rfkill); - ehotk->wimax_rfkill = NULL; + struct device *hwmon; + int result; + + hwmon = hwmon_device_register(&eeepc->platform_device->dev); + if (IS_ERR(hwmon)) { + pr_err("Could not register eeepc hwmon device\n"); + eeepc->hwmon_device = NULL; + return PTR_ERR(hwmon); } + eeepc->hwmon_device = hwmon; + result = sysfs_create_group(&hwmon->kobj, + &hwmon_attribute_group); + if (result) + eeepc_hwmon_exit(eeepc); + return result; } -static void eeepc_input_exit(void) +/* + * Backlight device + */ +static int read_brightness(struct backlight_device *bd) { - if (ehotk->inputdev) - input_unregister_device(ehotk->inputdev); + struct eeepc_laptop *eeepc = bl_get_data(bd); + + return get_acpi(eeepc, CM_ASL_PANELBRIGHT); } -static void eeepc_hwmon_exit(void) +static int set_brightness(struct backlight_device *bd, int value) { - struct device *hwmon; + struct eeepc_laptop *eeepc = bl_get_data(bd); - hwmon = eeepc_hwmon_device; - if (!hwmon) - return ; - sysfs_remove_group(&hwmon->kobj, - &hwmon_attribute_group); - hwmon_device_unregister(hwmon); - eeepc_hwmon_device = NULL; + return set_acpi(eeepc, CM_ASL_PANELBRIGHT, value); } -static int eeepc_new_rfkill(struct rfkill **rfkill, - const char *name, struct device *dev, - enum rfkill_type type, int cm) +static int update_bl_status(struct backlight_device *bd) { - int result; + return set_brightness(bd, bd->props.brightness); +} - result = get_acpi(cm); - if (result < 0) - return result; +static struct backlight_ops eeepcbl_ops = { + .get_brightness = read_brightness, + .update_status = update_bl_status, +}; - *rfkill = rfkill_alloc(name, dev, type, - &eeepc_rfkill_ops, (void *)(unsigned long)cm); +static int eeepc_backlight_notify(struct eeepc_laptop *eeepc) +{ + struct backlight_device *bd = eeepc->backlight_device; + int old = bd->props.brightness; - if (!*rfkill) - return -EINVAL; + backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY); - rfkill_init_sw_state(*rfkill, get_acpi(cm) != 1); - result = rfkill_register(*rfkill); - if (result) { - rfkill_destroy(*rfkill); - *rfkill = NULL; - return result; - } - return 0; + return old; } - -static int eeepc_rfkill_init(struct device *dev) +static int eeepc_backlight_init(struct eeepc_laptop *eeepc) { - int result = 0; - - mutex_init(&ehotk->hotplug_lock); + struct backlight_device *bd; - result = eeepc_new_rfkill(&ehotk->wlan_rfkill, - "eeepc-wlan", dev, - RFKILL_TYPE_WLAN, CM_ASL_WLAN); + bd = backlight_device_register(EEEPC_LAPTOP_FILE, + &eeepc->platform_device->dev, + eeepc, &eeepcbl_ops); + if (IS_ERR(bd)) { + pr_err("Could not register eeepc backlight device\n"); + eeepc->backlight_device = NULL; + return PTR_ERR(bd); + } + eeepc->backlight_device = bd; + bd->props.max_brightness = 15; + bd->props.brightness = read_brightness(bd); + bd->props.power = FB_BLANK_UNBLANK; + backlight_update_status(bd); + return 0; +} - if (result && result != -ENODEV) - goto exit; +static void eeepc_backlight_exit(struct eeepc_laptop *eeepc) +{ + if (eeepc->backlight_device) + backlight_device_unregister(eeepc->backlight_device); + eeepc->backlight_device = NULL; +} - result = eeepc_new_rfkill(&ehotk->bluetooth_rfkill, - "eeepc-bluetooth", dev, - RFKILL_TYPE_BLUETOOTH, CM_ASL_BLUETOOTH); - if (result && result != -ENODEV) - goto exit; +/* + * Input device (i.e. hotkeys) + */ +static struct key_entry *eeepc_get_entry_by_scancode( + struct eeepc_laptop *eeepc, + int code) +{ + struct key_entry *key; - result = eeepc_new_rfkill(&ehotk->wwan3g_rfkill, - "eeepc-wwan3g", dev, - RFKILL_TYPE_WWAN, CM_ASL_3G); + for (key = eeepc->keymap; key->type != KE_END; key++) + if (code == key->code) + return key; - if (result && result != -ENODEV) - goto exit; + return NULL; +} - result = eeepc_new_rfkill(&ehotk->wimax_rfkill, - "eeepc-wimax", dev, - RFKILL_TYPE_WIMAX, CM_ASL_WIMAX); +static void eeepc_input_notify(struct eeepc_laptop *eeepc, int event) +{ + static struct key_entry *key; - if (result && result != -ENODEV) - goto exit; + key = eeepc_get_entry_by_scancode(eeepc, event); + if (key) { + switch (key->type) { + case KE_KEY: + input_report_key(eeepc->inputdev, key->keycode, + 1); + input_sync(eeepc->inputdev); + input_report_key(eeepc->inputdev, key->keycode, + 0); + input_sync(eeepc->inputdev); + break; + } + } +} - result = eeepc_setup_pci_hotplug(); - /* - * If we get -EBUSY then something else is handling the PCI hotplug - - * don't fail in this case - */ - if (result == -EBUSY) - result = 0; +static struct key_entry *eeepc_get_entry_by_keycode( + struct eeepc_laptop *eeepc, int code) +{ + struct key_entry *key; - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P5"); - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); - /* - * Refresh pci hotplug in case the rfkill state was changed during - * setup. - */ - eeepc_rfkill_hotplug(); + for (key = eeepc->keymap; key->type != KE_END; key++) + if (code == key->keycode && key->type == KE_KEY) + return key; -exit: - if (result && result != -ENODEV) - eeepc_rfkill_exit(); - return result; + return NULL; } -static int eeepc_backlight_init(struct device *dev) +static int eeepc_getkeycode(struct input_dev *dev, int scancode, int *keycode) { - struct backlight_device *bd; + struct eeepc_laptop *eeepc = input_get_drvdata(dev); + struct key_entry *key = eeepc_get_entry_by_scancode(eeepc, scancode); - bd = backlight_device_register(EEEPC_HOTK_FILE, dev, - NULL, &eeepcbl_ops); - if (IS_ERR(bd)) { - pr_err("Could not register eeepc backlight device\n"); - eeepc_backlight_device = NULL; - return PTR_ERR(bd); + if (key && key->type == KE_KEY) { + *keycode = key->keycode; + return 0; } - eeepc_backlight_device = bd; - bd->props.max_brightness = 15; - bd->props.brightness = read_brightness(NULL); - bd->props.power = FB_BLANK_UNBLANK; - backlight_update_status(bd); - return 0; + + return -EINVAL; } -static int eeepc_hwmon_init(struct device *dev) +static int eeepc_setkeycode(struct input_dev *dev, int scancode, int keycode) { - struct device *hwmon; - int result; + struct eeepc_laptop *eeepc = input_get_drvdata(dev); + struct key_entry *key; + int old_keycode; - hwmon = hwmon_device_register(dev); - if (IS_ERR(hwmon)) { - pr_err("Could not register eeepc hwmon device\n"); - eeepc_hwmon_device = NULL; - return PTR_ERR(hwmon); + if (keycode < 0 || keycode > KEY_MAX) + return -EINVAL; + + key = eeepc_get_entry_by_scancode(eeepc, scancode); + if (key && key->type == KE_KEY) { + old_keycode = key->keycode; + key->keycode = keycode; + set_bit(keycode, dev->keybit); + if (!eeepc_get_entry_by_keycode(eeepc, old_keycode)) + clear_bit(old_keycode, dev->keybit); + return 0; } - eeepc_hwmon_device = hwmon; - result = sysfs_create_group(&hwmon->kobj, - &hwmon_attribute_group); - if (result) - eeepc_hwmon_exit(); - return result; + + return -EINVAL; } -static int eeepc_input_init(struct device *dev) +static int eeepc_input_init(struct eeepc_laptop *eeepc) { const struct key_entry *key; int result; - ehotk->inputdev = input_allocate_device(); - if (!ehotk->inputdev) { + eeepc->inputdev = input_allocate_device(); + if (!eeepc->inputdev) { pr_info("Unable to allocate input device\n"); return -ENOMEM; } - ehotk->inputdev->name = "Asus EeePC extra buttons"; - ehotk->inputdev->dev.parent = dev; - ehotk->inputdev->phys = EEEPC_HOTK_FILE "/input0"; - ehotk->inputdev->id.bustype = BUS_HOST; - ehotk->inputdev->getkeycode = eeepc_getkeycode; - ehotk->inputdev->setkeycode = eeepc_setkeycode; - + eeepc->inputdev->name = "Asus EeePC extra buttons"; + eeepc->inputdev->dev.parent = &eeepc->platform_device->dev; + eeepc->inputdev->phys = EEEPC_LAPTOP_FILE "/input0"; + eeepc->inputdev->id.bustype = BUS_HOST; + eeepc->inputdev->getkeycode = eeepc_getkeycode; + eeepc->inputdev->setkeycode = eeepc_setkeycode; + input_set_drvdata(eeepc->inputdev, eeepc); + + eeepc->keymap = kmemdup(eeepc_keymap, sizeof(eeepc_keymap), + GFP_KERNEL); for (key = eeepc_keymap; key->type != KE_END; key++) { switch (key->type) { case KE_KEY: - set_bit(EV_KEY, ehotk->inputdev->evbit); - set_bit(key->keycode, ehotk->inputdev->keybit); + set_bit(EV_KEY, eeepc->inputdev->evbit); + set_bit(key->keycode, eeepc->inputdev->keybit); break; } } - result = input_register_device(ehotk->inputdev); + result = input_register_device(eeepc->inputdev); if (result) { pr_info("Unable to register input device\n"); - input_free_device(ehotk->inputdev); + input_free_device(eeepc->inputdev); return result; } return 0; } -static int __devinit eeepc_hotk_add(struct acpi_device *device) +static void eeepc_input_exit(struct eeepc_laptop *eeepc) { - struct device *dev; + if (eeepc->inputdev) { + input_unregister_device(eeepc->inputdev); + kfree(eeepc->keymap); + } +} + +/* + * ACPI driver + */ +static void eeepc_acpi_notify(struct acpi_device *device, u32 event) +{ + struct eeepc_laptop *eeepc = acpi_driver_data(device); + u16 count; + + if (event > ACPI_MAX_SYS_NOTIFY) + return; + count = eeepc->event_count[event % 128]++; + acpi_bus_generate_proc_event(device, event, count); + acpi_bus_generate_netlink_event(device->pnp.device_class, + dev_name(&device->dev), event, + count); + + /* Brightness events are special */ + if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX) { + + /* Ignore them completely if the acpi video driver is used */ + if (eeepc->backlight_device != NULL) { + int old_brightness, new_brightness; + + /* Update the backlight device. */ + old_brightness = eeepc_backlight_notify(eeepc); + + /* Convert event to keypress (obsolescent hack) */ + new_brightness = event - NOTIFY_BRN_MIN; + + if (new_brightness < old_brightness) { + event = NOTIFY_BRN_MIN; /* brightness down */ + } else if (new_brightness > old_brightness) { + event = NOTIFY_BRN_MAX; /* brightness up */ + } else { + /* + * no change in brightness - already at min/max, + * event will be desired value (or else ignored) + */ + } + eeepc_input_notify(eeepc, event); + } + } else { + /* Everything else is a bona-fide keypress event */ + eeepc_input_notify(eeepc, event); + } +} + +static void cmsg_quirk(struct eeepc_laptop *eeepc, int cm, const char *name) +{ + int dummy; + + /* Some BIOSes do not report cm although it is avaliable. + Check if cm_getv[cm] works and, if yes, assume cm should be set. */ + if (!(eeepc->cm_supported & (1 << cm)) + && !read_acpi_int(eeepc->handle, cm_getv[cm], &dummy)) { + pr_info("%s (%x) not reported by BIOS," + " enabling anyway\n", name, 1 << cm); + eeepc->cm_supported |= 1 << cm; + } +} + +static void cmsg_quirks(struct eeepc_laptop *eeepc) +{ + cmsg_quirk(eeepc, CM_ASL_LID, "LID"); + cmsg_quirk(eeepc, CM_ASL_TYPE, "TYPE"); + cmsg_quirk(eeepc, CM_ASL_PANELPOWER, "PANELPOWER"); + cmsg_quirk(eeepc, CM_ASL_TPD, "TPD"); +} + +static int eeepc_acpi_init(struct eeepc_laptop *eeepc, + struct acpi_device *device) +{ + unsigned int init_flags; int result; - if (!device) - return -EINVAL; - pr_notice(EEEPC_HOTK_NAME "\n"); - ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL); - if (!ehotk) - return -ENOMEM; - ehotk->init_flag = DISABLE_ASL_WLAN | DISABLE_ASL_DISPLAYSWITCH; - ehotk->handle = device->handle; - strcpy(acpi_device_name(device), EEEPC_HOTK_DEVICE_NAME); - strcpy(acpi_device_class(device), EEEPC_HOTK_CLASS); - device->driver_data = ehotk; - ehotk->device = device; - - result = eeepc_hotk_check(); + result = acpi_bus_get_status(device); if (result) - goto fail_platform_driver; - eeepc_enable_camera(); + return result; + if (!device->status.present) { + pr_err("Hotkey device not present, aborting\n"); + return -ENODEV; + } - /* Register platform stuff */ - result = platform_driver_register(&platform_driver); - if (result) - goto fail_platform_driver; - platform_device = platform_device_alloc(EEEPC_HOTK_FILE, -1); - if (!platform_device) { - result = -ENOMEM; - goto fail_platform_device1; + init_flags = DISABLE_ASL_WLAN | DISABLE_ASL_DISPLAYSWITCH; + pr_notice("Hotkey init flags 0x%x\n", init_flags); + + if (write_acpi_int(eeepc->handle, "INIT", init_flags)) { + pr_err("Hotkey initialization failed\n"); + return -ENODEV; } - result = platform_device_add(platform_device); - if (result) - goto fail_platform_device2; - result = sysfs_create_group(&platform_device->dev.kobj, - &platform_attribute_group); + + /* get control methods supported */ + if (read_acpi_int(eeepc->handle, "CMSG", &eeepc->cm_supported)) { + pr_err("Get control methods supported failed\n"); + return -ENODEV; + } + cmsg_quirks(eeepc); + pr_info("Get control methods supported: 0x%x\n", eeepc->cm_supported); + + return 0; +} + +static void __devinit eeepc_enable_camera(struct eeepc_laptop *eeepc) +{ + /* + * If the following call to set_acpi() fails, it's because there's no + * camera so we can ignore the error. + */ + if (get_acpi(eeepc, CM_ASL_CAMERA) == 0) + set_acpi(eeepc, CM_ASL_CAMERA, 1); +} + +static bool eeepc_device_present; + +static int __devinit eeepc_acpi_add(struct acpi_device *device) +{ + struct eeepc_laptop *eeepc; + int result; + + pr_notice(EEEPC_LAPTOP_NAME "\n"); + eeepc = kzalloc(sizeof(struct eeepc_laptop), GFP_KERNEL); + if (!eeepc) + return -ENOMEM; + eeepc->handle = device->handle; + strcpy(acpi_device_name(device), EEEPC_ACPI_DEVICE_NAME); + strcpy(acpi_device_class(device), EEEPC_ACPI_CLASS); + device->driver_data = eeepc; + + result = eeepc_acpi_init(eeepc, device); if (result) - goto fail_sysfs; + goto fail_platform; + eeepc_enable_camera(eeepc); - dev = &platform_device->dev; + /* + * Register the platform device first. It is used as a parent for the + * sub-devices below. + * + * Note that if there are multiple instances of this ACPI device it + * will bail out, because the platform device is registered with a + * fixed name. Of course it doesn't make sense to have more than one, + * and machine-specific scripts find the fixed name convenient. But + * It's also good for us to exclude multiple instances because both + * our hwmon and our wlan rfkill subdevice use global ACPI objects + * (the EC and the wlan PCI slot respectively). + */ + result = eeepc_platform_init(eeepc); + if (result) + goto fail_platform; if (!acpi_video_backlight_support()) { - result = eeepc_backlight_init(dev); + result = eeepc_backlight_init(eeepc); if (result) goto fail_backlight; } else - pr_info("Backlight controlled by ACPI video " - "driver\n"); + pr_info("Backlight controlled by ACPI video driver\n"); - result = eeepc_input_init(dev); + result = eeepc_input_init(eeepc); if (result) goto fail_input; - result = eeepc_hwmon_init(dev); + result = eeepc_hwmon_init(eeepc); if (result) goto fail_hwmon; - result = eeepc_rfkill_init(dev); + result = eeepc_led_init(eeepc); + if (result) + goto fail_led; + + result = eeepc_rfkill_init(eeepc); if (result) goto fail_rfkill; + eeepc_device_present = true; return 0; fail_rfkill: - eeepc_hwmon_exit(); + eeepc_led_exit(eeepc); +fail_led: + eeepc_hwmon_exit(eeepc); fail_hwmon: - eeepc_input_exit(); + eeepc_input_exit(eeepc); fail_input: - eeepc_backlight_exit(); + eeepc_backlight_exit(eeepc); fail_backlight: - sysfs_remove_group(&platform_device->dev.kobj, - &platform_attribute_group); -fail_sysfs: - platform_device_del(platform_device); -fail_platform_device2: - platform_device_put(platform_device); -fail_platform_device1: - platform_driver_unregister(&platform_driver); -fail_platform_driver: - kfree(ehotk); + eeepc_platform_exit(eeepc); +fail_platform: + kfree(eeepc); return result; } -static int eeepc_hotk_remove(struct acpi_device *device, int type) +static int eeepc_acpi_remove(struct acpi_device *device, int type) { - if (!device || !acpi_driver_data(device)) - return -EINVAL; + struct eeepc_laptop *eeepc = acpi_driver_data(device); - eeepc_backlight_exit(); - eeepc_rfkill_exit(); - eeepc_input_exit(); - eeepc_hwmon_exit(); - sysfs_remove_group(&platform_device->dev.kobj, - &platform_attribute_group); - platform_device_unregister(platform_device); - platform_driver_unregister(&platform_driver); + eeepc_backlight_exit(eeepc); + eeepc_rfkill_exit(eeepc); + eeepc_input_exit(eeepc); + eeepc_hwmon_exit(eeepc); + eeepc_led_exit(eeepc); + eeepc_platform_exit(eeepc); - kfree(ehotk); + kfree(eeepc); return 0; } + +static const struct acpi_device_id eeepc_device_ids[] = { + {EEEPC_ACPI_HID, 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, eeepc_device_ids); + +static struct acpi_driver eeepc_acpi_driver = { + .name = EEEPC_LAPTOP_NAME, + .class = EEEPC_ACPI_CLASS, + .owner = THIS_MODULE, + .ids = eeepc_device_ids, + .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, + .ops = { + .add = eeepc_acpi_add, + .remove = eeepc_acpi_remove, + .notify = eeepc_acpi_notify, + }, +}; + + static int __init eeepc_laptop_init(void) { int result; - if (acpi_disabled) - return -ENODEV; - result = acpi_bus_register_driver(&eeepc_hotk_driver); + result = platform_driver_register(&platform_driver); if (result < 0) return result; - if (!ehotk) { - acpi_bus_unregister_driver(&eeepc_hotk_driver); - return -ENODEV; + + result = acpi_bus_register_driver(&eeepc_acpi_driver); + if (result < 0) + goto fail_acpi_driver; + if (!eeepc_device_present) { + result = -ENODEV; + goto fail_no_device; } return 0; + +fail_no_device: + acpi_bus_unregister_driver(&eeepc_acpi_driver); +fail_acpi_driver: + platform_driver_unregister(&platform_driver); + return result; } static void __exit eeepc_laptop_exit(void) { - acpi_bus_unregister_driver(&eeepc_hotk_driver); + acpi_bus_unregister_driver(&eeepc_acpi_driver); + platform_driver_unregister(&platform_driver); } module_init(eeepc_laptop_init); |