summaryrefslogtreecommitdiffstats
path: root/drivers/platform
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/platform')
-rw-r--r--drivers/platform/x86/acerhdf.c12
-rw-r--r--drivers/platform/x86/eeepc-laptop.c7
-rw-r--r--drivers/platform/x86/fujitsu-laptop.c2
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c26
4 files changed, 30 insertions, 17 deletions
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 0a8f735f6c4..ab64522aaa6 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -52,7 +52,7 @@
*/
#undef START_IN_KERNEL_MODE
-#define DRV_VER "0.5.17"
+#define DRV_VER "0.5.18"
/*
* According to the Atom N270 datasheet,
@@ -61,7 +61,7 @@
* measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
* assume 89°C is critical temperature.
*/
-#define ACERHDF_TEMP_CRIT 89
+#define ACERHDF_TEMP_CRIT 89000
#define ACERHDF_FAN_OFF 0
#define ACERHDF_FAN_AUTO 1
@@ -69,7 +69,7 @@
* No matter what value the user puts into the fanon variable, turn on the fan
* at 80 degree Celsius to prevent hardware damage
*/
-#define ACERHDF_MAX_FANON 80
+#define ACERHDF_MAX_FANON 80000
/*
* Maximum interval between two temperature checks is 15 seconds, as the die
@@ -85,8 +85,8 @@ static int kernelmode;
#endif
static unsigned int interval = 10;
-static unsigned int fanon = 63;
-static unsigned int fanoff = 58;
+static unsigned int fanon = 63000;
+static unsigned int fanoff = 58000;
static unsigned int verbose;
static unsigned int fanstate = ACERHDF_FAN_AUTO;
static char force_bios[16];
@@ -171,7 +171,7 @@ static int acerhdf_get_temp(int *temp)
if (ec_read(bios_cfg->tempreg, &read_temp))
return -EINVAL;
- *temp = read_temp;
+ *temp = read_temp * 1000;
return 0;
}
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 749e2102b2b..4226e535273 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -350,13 +350,14 @@ static const struct rfkill_ops eeepc_rfkill_ops = {
.set_block = eeepc_rfkill_set,
};
-static void __init eeepc_enable_camera(void)
+static void __devinit eeepc_enable_camera(void)
{
/*
* If the following call to set_acpi() fails, it's because there's no
* camera so we can ignore the error.
*/
- set_acpi(CM_ASL_CAMERA, 1);
+ if (get_acpi(CM_ASL_CAMERA) == 0)
+ set_acpi(CM_ASL_CAMERA, 1);
}
/*
@@ -1189,7 +1190,7 @@ static int eeepc_input_init(struct device *dev)
return 0;
}
-static int eeepc_hotk_add(struct acpi_device *device)
+static int __devinit eeepc_hotk_add(struct acpi_device *device)
{
struct device *dev;
int result;
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index f35aee5c214..bcd4ba8be7d 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -944,7 +944,7 @@ static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type)
struct fujitsu_hotkey_t *fujitsu_hotkey = acpi_driver_data(device);
struct input_dev *input = fujitsu_hotkey->input;
-#ifdef CONFIG_LEDS_CLASS
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
if (fujitsu_hotkey->logolamp_registered)
led_classdev_unregister(&logolamp_led);
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index d93108d148f..a848c7e20ae 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1680,36 +1680,48 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv)
| (__bv1) << 8 | (__bv2) }
#define TPV_Q_X(__v, __bid1, __bid2, __bv1, __bv2, \
- __eid1, __eid2, __ev1, __ev2) \
+ __eid, __ev1, __ev2) \
{ .vendor = (__v), \
.bios = TPID(__bid1, __bid2), \
- .ec = TPID(__eid1, __eid2), \
+ .ec = __eid, \
.quirks = (__ev1) << 24 | (__ev2) << 16 \
| (__bv1) << 8 | (__bv2) }
#define TPV_QI0(__id1, __id2, __bv1, __bv2) \
TPV_Q(PCI_VENDOR_ID_IBM, __id1, __id2, __bv1, __bv2)
+/* Outdated IBM BIOSes often lack the EC id string */
#define TPV_QI1(__id1, __id2, __bv1, __bv2, __ev1, __ev2) \
TPV_Q_X(PCI_VENDOR_ID_IBM, __id1, __id2, \
- __bv1, __bv2, __id1, __id2, __ev1, __ev2)
+ __bv1, __bv2, TPID(__id1, __id2), \
+ __ev1, __ev2), \
+ TPV_Q_X(PCI_VENDOR_ID_IBM, __id1, __id2, \
+ __bv1, __bv2, TPACPI_MATCH_UNKNOWN, \
+ __ev1, __ev2)
+/* Outdated IBM BIOSes often lack the EC id string */
#define TPV_QI2(__bid1, __bid2, __bv1, __bv2, \
__eid1, __eid2, __ev1, __ev2) \
TPV_Q_X(PCI_VENDOR_ID_IBM, __bid1, __bid2, \
- __bv1, __bv2, __eid1, __eid2, __ev1, __ev2)
+ __bv1, __bv2, TPID(__eid1, __eid2), \
+ __ev1, __ev2), \
+ TPV_Q_X(PCI_VENDOR_ID_IBM, __bid1, __bid2, \
+ __bv1, __bv2, TPACPI_MATCH_UNKNOWN, \
+ __ev1, __ev2)
#define TPV_QL0(__id1, __id2, __bv1, __bv2) \
TPV_Q(PCI_VENDOR_ID_LENOVO, __id1, __id2, __bv1, __bv2)
#define TPV_QL1(__id1, __id2, __bv1, __bv2, __ev1, __ev2) \
TPV_Q_X(PCI_VENDOR_ID_LENOVO, __id1, __id2, \
- __bv1, __bv2, __id1, __id2, __ev1, __ev2)
+ __bv1, __bv2, TPID(__id1, __id2), \
+ __ev1, __ev2)
#define TPV_QL2(__bid1, __bid2, __bv1, __bv2, \
__eid1, __eid2, __ev1, __ev2) \
TPV_Q_X(PCI_VENDOR_ID_LENOVO, __bid1, __bid2, \
- __bv1, __bv2, __eid1, __eid2, __ev1, __ev2)
+ __bv1, __bv2, TPID(__eid1, __eid2), \
+ __ev1, __ev2)
static const struct tpacpi_quirk tpacpi_bios_version_qtable[] __initconst = {
/* Numeric models ------------------ */
@@ -6313,7 +6325,7 @@ static int brightness_write(char *buf)
* Doing it this way makes the syscall restartable in case of EINTR
*/
rc = brightness_set(level);
- return (rc == -EINTR)? ERESTARTSYS : rc;
+ return (rc == -EINTR)? -ERESTARTSYS : rc;
}
static struct ibm_struct brightness_driver_data = {
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-24 23:51:17 +0000