diff options
Diffstat (limited to 'drivers/power/power_supply_sysfs.c')
| -rw-r--r-- | drivers/power/power_supply_sysfs.c | 299 |
1 files changed, 299 insertions, 0 deletions
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c new file mode 100644 index 00000000000..c07d4258d34 --- /dev/null +++ b/drivers/power/power_supply_sysfs.c @@ -0,0 +1,299 @@ +/* + * Sysfs interface for the universal power supply monitor class + * + * Copyright © 2007 David Woodhouse <dwmw2@infradead.org> + * Copyright © 2007 Anton Vorontsov <cbou@mail.ru> + * Copyright © 2004 Szabolcs Gyurko + * Copyright © 2003 Ian Molton <spyro@f2s.com> + * + * Modified: 2004, Oct Szabolcs Gyurko + * + * You may use this code as per GPL version 2 + */ + +#include <linux/ctype.h> +#include <linux/power_supply.h> + +/* + * This is because the name "current" breaks the device attr macro. + * The "current" word resolves to "(get_current())" so instead of + * "current" "(get_current())" appears in the sysfs. + * + * The source of this definition is the device.h which calls __ATTR + * macro in sysfs.h which calls the __stringify macro. + * + * Only modification that the name is not tried to be resolved + * (as a macro let's say). + */ + +#define POWER_SUPPLY_ATTR(_name) \ +{ \ + .attr = { .name = #_name, .mode = 0444, .owner = THIS_MODULE }, \ + .show = power_supply_show_property, \ + .store = NULL, \ +} + +static struct device_attribute power_supply_attrs[]; + +static ssize_t power_supply_show_property(struct device *dev, + struct device_attribute *attr, + char *buf) { + static char *status_text[] = { + "Unknown", "Charging", "Discharging", "Not charging", "Full" + }; + static char *health_text[] = { + "Unknown", "Good", "Overheat", "Dead", "Over voltage", + "Unspecified failure" + }; + static char *technology_text[] = { + "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd" + }; + static char *capacity_level_text[] = { + "Unknown", "Critical", "Low", "Normal", "High", "Full" + }; + ssize_t ret; + struct power_supply *psy = dev_get_drvdata(dev); + const ptrdiff_t off = attr - power_supply_attrs; + union power_supply_propval value; + + ret = psy->get_property(psy, off, &value); + + if (ret < 0) { + if (ret != -ENODEV) + dev_err(dev, "driver failed to report `%s' property\n", + attr->attr.name); + return ret; + } + + if (off == POWER_SUPPLY_PROP_STATUS) + return sprintf(buf, "%s\n", status_text[value.intval]); + else if (off == POWER_SUPPLY_PROP_HEALTH) + return sprintf(buf, "%s\n", health_text[value.intval]); + else if (off == POWER_SUPPLY_PROP_TECHNOLOGY) + return sprintf(buf, "%s\n", technology_text[value.intval]); + else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL) + return sprintf(buf, "%s\n", + capacity_level_text[value.intval]); + else if (off >= POWER_SUPPLY_PROP_MODEL_NAME) + return sprintf(buf, "%s\n", value.strval); + + return sprintf(buf, "%d\n", value.intval); +} + +/* Must be in the same order as POWER_SUPPLY_PROP_* */ +static struct device_attribute power_supply_attrs[] = { + /* Properties of type `int' */ + POWER_SUPPLY_ATTR(status), + POWER_SUPPLY_ATTR(health), + POWER_SUPPLY_ATTR(present), + POWER_SUPPLY_ATTR(online), + POWER_SUPPLY_ATTR(technology), + POWER_SUPPLY_ATTR(voltage_max_design), + POWER_SUPPLY_ATTR(voltage_min_design), + POWER_SUPPLY_ATTR(voltage_now), + POWER_SUPPLY_ATTR(voltage_avg), + POWER_SUPPLY_ATTR(current_now), + POWER_SUPPLY_ATTR(current_avg), + POWER_SUPPLY_ATTR(charge_full_design), + POWER_SUPPLY_ATTR(charge_empty_design), + POWER_SUPPLY_ATTR(charge_full), + POWER_SUPPLY_ATTR(charge_empty), + POWER_SUPPLY_ATTR(charge_now), + POWER_SUPPLY_ATTR(charge_avg), + POWER_SUPPLY_ATTR(energy_full_design), + POWER_SUPPLY_ATTR(energy_empty_design), + POWER_SUPPLY_ATTR(energy_full), + POWER_SUPPLY_ATTR(energy_empty), + POWER_SUPPLY_ATTR(energy_now), + POWER_SUPPLY_ATTR(energy_avg), + POWER_SUPPLY_ATTR(capacity), + POWER_SUPPLY_ATTR(capacity_level), + POWER_SUPPLY_ATTR(temp), + POWER_SUPPLY_ATTR(temp_ambient), + POWER_SUPPLY_ATTR(time_to_empty_now), + POWER_SUPPLY_ATTR(time_to_empty_avg), + POWER_SUPPLY_ATTR(time_to_full_now), + POWER_SUPPLY_ATTR(time_to_full_avg), + /* Properties of type `const char *' */ + POWER_SUPPLY_ATTR(model_name), + POWER_SUPPLY_ATTR(manufacturer), +}; + +static ssize_t power_supply_show_static_attrs(struct device *dev, + struct device_attribute *attr, + char *buf) { + static char *type_text[] = { "Battery", "UPS", "Mains", "USB" }; + struct power_supply *psy = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", type_text[psy->type]); +} + +static struct device_attribute power_supply_static_attrs[] = { + __ATTR(type, 0444, power_supply_show_static_attrs, NULL), +}; + +int power_supply_create_attrs(struct power_supply *psy) +{ + int rc = 0; + int i, j; + + for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++) { + rc = device_create_file(psy->dev, + &power_supply_static_attrs[i]); + if (rc) + goto statics_failed; + } + + for (j = 0; j < psy->num_properties; j++) { + rc = device_create_file(psy->dev, + &power_supply_attrs[psy->properties[j]]); + if (rc) + goto dynamics_failed; + } + + goto succeed; + +dynamics_failed: + while (j--) + device_remove_file(psy->dev, + &power_supply_attrs[psy->properties[j]]); +statics_failed: + while (i--) + device_remove_file(psy->dev, + &power_supply_static_attrs[psy->properties[i]]); +succeed: + return rc; +} + +void power_supply_remove_attrs(struct power_supply *psy) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++) + device_remove_file(psy->dev, + &power_supply_static_attrs[i]); + + for (i = 0; i < psy->num_properties; i++) + device_remove_file(psy->dev, + &power_supply_attrs[psy->properties[i]]); + + return; +} + +static char *kstruprdup(const char *str, gfp_t gfp) +{ + char *ret, *ustr; + + ustr = ret = kmalloc(strlen(str) + 1, gfp); + + if (!ret) + return NULL; + + while (*str) + *ustr++ = toupper(*str++); + + *ustr = 0; + + return ret; +} + +int power_supply_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) +{ + struct power_supply *psy = dev_get_drvdata(dev); + int i = 0, length = 0, ret = 0, j; + char *prop_buf; + char *attrname; + + dev_dbg(dev, "uevent\n"); + + if (!psy) { + dev_dbg(dev, "No power supply yet\n"); + return ret; + } + + dev_dbg(dev, "POWER_SUPPLY_NAME=%s\n", psy->name); + + ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size, + &length, "POWER_SUPPLY_NAME=%s", psy->name); + if (ret) + return ret; + + prop_buf = (char *)get_zeroed_page(GFP_KERNEL); + if (!prop_buf) + return -ENOMEM; + + for (j = 0; j < ARRAY_SIZE(power_supply_static_attrs); j++) { + struct device_attribute *attr; + char *line; + + attr = &power_supply_static_attrs[j]; + + ret = power_supply_show_static_attrs(dev, attr, prop_buf); + if (ret < 0) + goto out; + + line = strchr(prop_buf, '\n'); + if (line) + *line = 0; + + attrname = kstruprdup(attr->attr.name, GFP_KERNEL); + if (!attrname) { + ret = -ENOMEM; + goto out; + } + + dev_dbg(dev, "Static prop %s=%s\n", attrname, prop_buf); + + ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size, + &length, "POWER_SUPPLY_%s=%s", + attrname, prop_buf); + kfree(attrname); + if (ret) + goto out; + } + + dev_dbg(dev, "%zd dynamic props\n", psy->num_properties); + + for (j = 0; j < psy->num_properties; j++) { + struct device_attribute *attr; + char *line; + + attr = &power_supply_attrs[psy->properties[j]]; + + ret = power_supply_show_property(dev, attr, prop_buf); + if (ret == -ENODEV) { + /* When a battery is absent, we expect -ENODEV. Don't abort; + send the uevent with at least the the PRESENT=0 property */ + ret = 0; + continue; + } + + if (ret < 0) + goto out; + + line = strchr(prop_buf, '\n'); + if (line) + *line = 0; + + attrname = kstruprdup(attr->attr.name, GFP_KERNEL); + if (!attrname) { + ret = -ENOMEM; + goto out; + } + + dev_dbg(dev, "prop %s=%s\n", attrname, prop_buf); + + ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size, + &length, "POWER_SUPPLY_%s=%s", + attrname, prop_buf); + kfree(attrname); + if (ret) + goto out; + } + +out: + free_page((unsigned long)prop_buf); + + return ret; +} |