summaryrefslogtreecommitdiffstats
path: root/drivers/power/reset/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power/reset/Kconfig')
-rw-r--r--drivers/power/reset/Kconfig17
1 files changed, 17 insertions, 0 deletions
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 6461b489fb0..1ae65b82286 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -13,3 +13,20 @@ config POWER_RESET_GPIO
This driver supports turning off your board via a GPIO line.
If your board needs a GPIO high/low to power down, say Y and
create a binding in your devicetree.
+
+config POWER_RESET_QNAP
+ bool "QNAP power-off driver"
+ depends on OF_GPIO && POWER_RESET && PLAT_ORION
+ help
+ This driver supports turning off QNAP NAS devices by sending
+ commands to the microcontroller which controls the main power.
+
+ Say Y if you have a QNAP NAS.
+
+config POWER_RESET_RESTART
+ bool "Restart power-off driver"
+ depends on ARM
+ help
+ Some boards don't actually have the ability to power off.
+ Instead they restart, and u-boot holds the SoC until the
+ user presses a key. u-boot then boots into Linux.