diff options
Diffstat (limited to 'drivers/power/wm831x_power.c')
| -rw-r--r-- | drivers/power/wm831x_power.c | 144 |
1 files changed, 3 insertions, 141 deletions
diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c index 2a4c8b0b829..f85e80b1b40 100644 --- a/drivers/power/wm831x_power.c +++ b/drivers/power/wm831x_power.c @@ -21,7 +21,6 @@ struct wm831x_power { struct wm831x *wm831x; struct power_supply wall; - struct power_supply backup; struct power_supply usb; struct power_supply battery; }; @@ -454,125 +453,6 @@ static irqreturn_t wm831x_bat_irq(int irq, void *data) /********************************************************************* - * Backup supply properties - *********************************************************************/ - -static void wm831x_config_backup(struct wm831x *wm831x) -{ - struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data; - struct wm831x_backup_pdata *pdata; - int ret, reg; - - if (!wm831x_pdata || !wm831x_pdata->backup) { - dev_warn(wm831x->dev, - "No backup battery charger configuration\n"); - return; - } - - pdata = wm831x_pdata->backup; - - reg = 0; - - if (pdata->charger_enable) - reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA; - if (pdata->no_constant_voltage) - reg |= WM831X_BKUP_CHG_MODE; - - switch (pdata->vlim) { - case 2500: - break; - case 3100: - reg |= WM831X_BKUP_CHG_VLIM; - break; - default: - dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n", - pdata->vlim); - } - - switch (pdata->ilim) { - case 100: - break; - case 200: - reg |= 1; - break; - case 300: - reg |= 2; - break; - case 400: - reg |= 3; - break; - default: - dev_err(wm831x->dev, "Invalid backup current limit %duA\n", - pdata->ilim); - } - - ret = wm831x_reg_unlock(wm831x); - if (ret != 0) { - dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret); - return; - } - - ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL, - WM831X_BKUP_CHG_ENA_MASK | - WM831X_BKUP_CHG_MODE_MASK | - WM831X_BKUP_BATT_DET_ENA_MASK | - WM831X_BKUP_CHG_VLIM_MASK | - WM831X_BKUP_CHG_ILIM_MASK, - reg); - if (ret != 0) - dev_err(wm831x->dev, - "Failed to set backup charger config: %d\n", ret); - - wm831x_reg_lock(wm831x); -} - -static int wm831x_backup_get_prop(struct power_supply *psy, - enum power_supply_property psp, - union power_supply_propval *val) -{ - struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); - struct wm831x *wm831x = wm831x_power->wm831x; - int ret = 0; - - ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL); - if (ret < 0) - return ret; - - switch (psp) { - case POWER_SUPPLY_PROP_STATUS: - if (ret & WM831X_BKUP_CHG_STS) - val->intval = POWER_SUPPLY_STATUS_CHARGING; - else - val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; - break; - - case POWER_SUPPLY_PROP_VOLTAGE_NOW: - ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BKUP_BATT, - val); - break; - - case POWER_SUPPLY_PROP_PRESENT: - if (ret & WM831X_BKUP_CHG_STS) - val->intval = 1; - else - val->intval = 0; - break; - - default: - ret = -EINVAL; - break; - } - - return ret; -} - -static enum power_supply_property wm831x_backup_props[] = { - POWER_SUPPLY_PROP_STATUS, - POWER_SUPPLY_PROP_VOLTAGE_NOW, - POWER_SUPPLY_PROP_PRESENT, -}; - -/********************************************************************* * Initialisation *********************************************************************/ @@ -595,10 +475,7 @@ static irqreturn_t wm831x_pwr_src_irq(int irq, void *data) dev_dbg(wm831x->dev, "Power source changed\n"); - /* Just notify for everything - little harm in overnotifying. - * The backup battery is not a power source while the system - * is running so skip that. - */ + /* Just notify for everything - little harm in overnotifying. */ power_supply_changed(&wm831x_power->battery); power_supply_changed(&wm831x_power->usb); power_supply_changed(&wm831x_power->wall); @@ -613,7 +490,6 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev) struct power_supply *usb; struct power_supply *battery; struct power_supply *wall; - struct power_supply *backup; int ret, irq, i; power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL); @@ -626,13 +502,11 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev) usb = &power->usb; battery = &power->battery; wall = &power->wall; - backup = &power->backup; /* We ignore configuration failures since we can still read back - * the status without enabling either of the chargers. + * the status without enabling the charger. */ wm831x_config_battery(wm831x); - wm831x_config_backup(wm831x); wall->name = "wm831x-wall"; wall->type = POWER_SUPPLY_TYPE_MAINS; @@ -661,15 +535,6 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev) if (ret) goto err_battery; - backup->name = "wm831x-backup"; - backup->type = POWER_SUPPLY_TYPE_BATTERY; - backup->properties = wm831x_backup_props; - backup->num_properties = ARRAY_SIZE(wm831x_backup_props); - backup->get_property = wm831x_backup_get_prop; - ret = power_supply_register(&pdev->dev, backup); - if (ret) - goto err_usb; - irq = platform_get_irq_byname(pdev, "SYSLO"); ret = wm831x_request_irq(wm831x, irq, wm831x_syslo_irq, IRQF_TRIGGER_RISING, "SYSLO", @@ -677,7 +542,7 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev) if (ret != 0) { dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n", irq, ret); - goto err_backup; + goto err_usb; } irq = platform_get_irq_byname(pdev, "PWR SRC"); @@ -716,8 +581,6 @@ err_bat_irq: err_syslo: irq = platform_get_irq_byname(pdev, "SYSLO"); wm831x_free_irq(wm831x, irq, power); -err_backup: - power_supply_unregister(backup); err_usb: power_supply_unregister(usb); err_battery: @@ -746,7 +609,6 @@ static __devexit int wm831x_power_remove(struct platform_device *pdev) irq = platform_get_irq_byname(pdev, "SYSLO"); wm831x_free_irq(wm831x, irq, wm831x_power); - power_supply_unregister(&wm831x_power->backup); power_supply_unregister(&wm831x_power->battery); power_supply_unregister(&wm831x_power->wall); power_supply_unregister(&wm831x_power->usb); |