diff options
Diffstat (limited to 'drivers/power')
37 files changed, 2522 insertions, 659 deletions
diff --git a/drivers/power/88pm860x_charger.c b/drivers/power/88pm860x_charger.c index 4b37a5af8de..36fb4b5a4b0 100644 --- a/drivers/power/88pm860x_charger.c +++ b/drivers/power/88pm860x_charger.c @@ -714,7 +714,6 @@ out_irq: while (--i >= 0) free_irq(info->irq[i], info); out: - kfree(info); return ret; } @@ -728,7 +727,6 @@ static int pm860x_charger_remove(struct platform_device *pdev) free_irq(info->irq[0], info); for (i = 0; i < info->irq_nums; i++) free_irq(info->irq[i], info); - kfree(info); return 0; } diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index ffe02fb7cbc..0d0b5d7d19d 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -340,6 +340,13 @@ config CHARGER_SMB347 Say Y to include support for Summit Microelectronics SMB347 Battery Charger. +config CHARGER_TPS65090 + tristate "TPS65090 battery charger driver" + depends on MFD_TPS65090 + help + Say Y here to enable support for battery charging with TPS65090 + PMIC chips. + config AB8500_BM bool "AB8500 Battery Management Driver" depends on AB8500_CORE && AB8500_GPADC @@ -353,13 +360,6 @@ config BATTERY_GOLDFISH Say Y to enable support for the battery and AC power in the Goldfish emulator. -config CHARGER_PM2301 - bool "PM2301 Battery Charger Driver" - depends on AB8500_BM - help - Say Y to include support for PM2301 charger driver. - Depends on AB8500 battery management core. - source "drivers/power/reset/Kconfig" endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 3f66436af45..653bf6ceff3 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -39,7 +39,7 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o -obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o +obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o @@ -47,10 +47,10 @@ obj-$(CONFIG_CHARGER_LP8727) += lp8727_charger.o obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o -obj-$(CONFIG_CHARGER_PM2301) += pm2301_charger.o obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o obj-$(CONFIG_POWER_AVS) += avs/ obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o +obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o obj-$(CONFIG_POWER_RESET) += reset/ diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c index 7a96c0650fb..d2986453309 100644 --- a/drivers/power/ab8500_bmdata.c +++ b/drivers/power/ab8500_bmdata.c @@ -11,7 +11,7 @@ * Note that the res_to_temp table must be strictly sorted by falling resistance * values to work. */ -static struct abx500_res_to_temp temp_tbl_A_thermistor[] = { +const struct abx500_res_to_temp ab8500_temp_tbl_a_thermistor[] = { {-5, 53407}, { 0, 48594}, { 5, 43804}, @@ -28,8 +28,12 @@ static struct abx500_res_to_temp temp_tbl_A_thermistor[] = { {60, 13437}, {65, 12500}, }; +EXPORT_SYMBOL(ab8500_temp_tbl_a_thermistor); -static struct abx500_res_to_temp temp_tbl_B_thermistor[] = { +const int ab8500_temp_tbl_a_size = ARRAY_SIZE(ab8500_temp_tbl_a_thermistor); +EXPORT_SYMBOL(ab8500_temp_tbl_a_size); + +const struct abx500_res_to_temp ab8500_temp_tbl_b_thermistor[] = { {-5, 200000}, { 0, 159024}, { 5, 151921}, @@ -46,8 +50,12 @@ static struct abx500_res_to_temp temp_tbl_B_thermistor[] = { {60, 85461}, {65, 82869}, }; +EXPORT_SYMBOL(ab8500_temp_tbl_b_thermistor); + +const int ab8500_temp_tbl_b_size = ARRAY_SIZE(ab8500_temp_tbl_b_thermistor); +EXPORT_SYMBOL(ab8500_temp_tbl_b_size); -static struct abx500_v_to_cap cap_tbl_A_thermistor[] = { +static const struct abx500_v_to_cap cap_tbl_a_thermistor[] = { {4171, 100}, {4114, 95}, {4009, 83}, @@ -70,7 +78,7 @@ static struct abx500_v_to_cap cap_tbl_A_thermistor[] = { {3247, 0}, }; -static struct abx500_v_to_cap cap_tbl_B_thermistor[] = { +static const struct abx500_v_to_cap cap_tbl_b_thermistor[] = { {4161, 100}, {4124, 98}, {4044, 90}, @@ -93,7 +101,7 @@ static struct abx500_v_to_cap cap_tbl_B_thermistor[] = { {3250, 0}, }; -static struct abx500_v_to_cap cap_tbl[] = { +static const struct abx500_v_to_cap cap_tbl[] = { {4186, 100}, {4163, 99}, {4114, 95}, @@ -124,7 +132,7 @@ static struct abx500_v_to_cap cap_tbl[] = { * Note that the res_to_temp table must be strictly sorted by falling * resistance values to work. */ -static struct abx500_res_to_temp temp_tbl[] = { +static const struct abx500_res_to_temp temp_tbl[] = { {-5, 214834}, { 0, 162943}, { 5, 124820}, @@ -146,7 +154,7 @@ static struct abx500_res_to_temp temp_tbl[] = { * Note that the batres_vs_temp table must be strictly sorted by falling * temperature values to work. */ -static struct batres_vs_temp temp_to_batres_tbl_thermistor[] = { +static const struct batres_vs_temp temp_to_batres_tbl_thermistor[] = { { 40, 120}, { 30, 135}, { 20, 165}, @@ -160,7 +168,7 @@ static struct batres_vs_temp temp_to_batres_tbl_thermistor[] = { * Note that the batres_vs_temp table must be strictly sorted by falling * temperature values to work. */ -static struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = { +static const struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = { { 60, 300}, { 30, 300}, { 20, 300}, @@ -171,7 +179,7 @@ static struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = { }; /* battery resistance table for LI ION 9100 battery */ -static struct batres_vs_temp temp_to_batres_tbl_9100[] = { +static const struct batres_vs_temp temp_to_batres_tbl_9100[] = { { 60, 180}, { 30, 180}, { 20, 180}, @@ -230,10 +238,10 @@ static struct abx500_battery_type bat_type_thermistor[] = { .maint_b_chg_timer_h = 200, .low_high_cur_lvl = 300, .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor), - .r_to_t_tbl = temp_tbl_A_thermistor, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor), - .v_to_cap_tbl = cap_tbl_A_thermistor, + .n_temp_tbl_elements = ARRAY_SIZE(ab8500_temp_tbl_a_thermistor), + .r_to_t_tbl = ab8500_temp_tbl_a_thermistor, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_a_thermistor), + .v_to_cap_tbl = cap_tbl_a_thermistor, .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), .batres_tbl = temp_to_batres_tbl_thermistor, @@ -258,10 +266,10 @@ static struct abx500_battery_type bat_type_thermistor[] = { .maint_b_chg_timer_h = 200, .low_high_cur_lvl = 300, .low_high_vol_lvl = 4000, - .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor), - .r_to_t_tbl = temp_tbl_B_thermistor, - .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor), - .v_to_cap_tbl = cap_tbl_B_thermistor, + .n_temp_tbl_elements = ARRAY_SIZE(ab8500_temp_tbl_b_thermistor), + .r_to_t_tbl = ab8500_temp_tbl_b_thermistor, + .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_b_thermistor), + .v_to_cap_tbl = cap_tbl_b_thermistor, .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor), .batres_tbl = temp_to_batres_tbl_thermistor, }, @@ -407,15 +415,27 @@ static const struct abx500_fg_parameters fg = { .battok_raising_th_sel1 = 2860, .maint_thres = 95, .user_cap_limit = 15, + .pcut_enable = 1, + .pcut_max_time = 127, + .pcut_flag_time = 112, + .pcut_max_restart = 15, + .pcut_debounce_time = 2, }; -static const struct abx500_maxim_parameters maxi_params = { +static const struct abx500_maxim_parameters ab8500_maxi_params = { .ena_maxi = true, .chg_curr = 910, .wait_cycles = 10, .charger_curr_step = 100, }; +static const struct abx500_maxim_parameters abx540_maxi_params = { + .ena_maxi = true, + .chg_curr = 3000, + .wait_cycles = 10, + .charger_curr_step = 200, +}; + static const struct abx500_bm_charger_parameters chg = { .usb_volt_max = 5500, .usb_curr_max = 1500, @@ -423,6 +443,46 @@ static const struct abx500_bm_charger_parameters chg = { .ac_curr_max = 1500, }; +/* + * This array maps the raw hex value to charger output current used by the + * AB8500 values + */ +static int ab8500_charge_output_curr_map[] = { + 100, 200, 300, 400, 500, 600, 700, 800, + 900, 1000, 1100, 1200, 1300, 1400, 1500, 1500, +}; + +static int ab8540_charge_output_curr_map[] = { + 0, 0, 0, 75, 100, 125, 150, 175, + 200, 225, 250, 275, 300, 325, 350, 375, + 400, 425, 450, 475, 500, 525, 550, 575, + 600, 625, 650, 675, 700, 725, 750, 775, + 800, 825, 850, 875, 900, 925, 950, 975, + 1000, 1025, 1050, 1075, 1100, 1125, 1150, 1175, + 1200, 1225, 1250, 1275, 1300, 1325, 1350, 1375, + 1400, 1425, 1450, 1500, 1600, 1700, 1900, 2000, +}; + +/* + * This array maps the raw hex value to charger input current used by the + * AB8500 values + */ +static int ab8500_charge_input_curr_map[] = { + 50, 98, 193, 290, 380, 450, 500, 600, + 700, 800, 900, 1000, 1100, 1300, 1400, 1500, +}; + +static int ab8540_charge_input_curr_map[] = { + 25, 50, 75, 100, 125, 150, 175, 200, + 225, 250, 275, 300, 325, 350, 375, 400, + 425, 450, 475, 500, 525, 550, 575, 600, + 625, 650, 675, 700, 725, 750, 775, 800, + 825, 850, 875, 900, 925, 950, 975, 1000, + 1025, 1050, 1075, 1100, 1125, 1150, 1175, 1200, + 1225, 1250, 1275, 1300, 1325, 1350, 1375, 1400, + 1425, 1450, 1475, 1500, 1500, 1500, 1500, 1500, +}; + struct abx500_bm_data ab8500_bm_data = { .temp_under = 3, .temp_low = 8, @@ -442,22 +502,60 @@ struct abx500_bm_data ab8500_bm_data = { .fg_res = 100, .cap_levels = &cap_levels, .bat_type = bat_type_thermistor, - .n_btypes = 3, + .n_btypes = ARRAY_SIZE(bat_type_thermistor), .batt_id = 0, .interval_charging = 5, .interval_not_charging = 120, .temp_hysteresis = 3, .gnd_lift_resistance = 34, - .maxi = &maxi_params, + .chg_output_curr = ab8500_charge_output_curr_map, + .n_chg_out_curr = ARRAY_SIZE(ab8500_charge_output_curr_map), + .maxi = &ab8500_maxi_params, .chg_params = &chg, .fg_params = &fg, + .chg_input_curr = ab8500_charge_input_curr_map, + .n_chg_in_curr = ARRAY_SIZE(ab8500_charge_input_curr_map), +}; + +struct abx500_bm_data ab8540_bm_data = { + .temp_under = 3, + .temp_low = 8, + .temp_high = 43, + .temp_over = 48, + .main_safety_tmr_h = 4, + .temp_interval_chg = 20, + .temp_interval_nochg = 120, + .usb_safety_tmr_h = 4, + .bkup_bat_v = BUP_VCH_SEL_2P6V, + .bkup_bat_i = BUP_ICH_SEL_150UA, + .no_maintenance = false, + .capacity_scaling = false, + .adc_therm = ABx500_ADC_THERM_BATCTRL, + .chg_unknown_bat = false, + .enable_overshoot = false, + .fg_res = 100, + .cap_levels = &cap_levels, + .bat_type = bat_type_thermistor, + .n_btypes = ARRAY_SIZE(bat_type_thermistor), + .batt_id = 0, + .interval_charging = 5, + .interval_not_charging = 120, + .temp_hysteresis = 3, + .gnd_lift_resistance = 0, + .maxi = &abx540_maxi_params, + .chg_params = &chg, + .fg_params = &fg, + .chg_output_curr = ab8540_charge_output_curr_map, + .n_chg_out_curr = ARRAY_SIZE(ab8540_charge_output_curr_map), + .chg_input_curr = ab8540_charge_input_curr_map, + .n_chg_in_curr = ARRAY_SIZE(ab8540_charge_input_curr_map), }; int ab8500_bm_of_probe(struct device *dev, struct device_node *np, struct abx500_bm_data *bm) { - struct batres_vs_temp *tmp_batres_tbl; + const struct batres_vs_temp *tmp_batres_tbl; struct device_node *battery_node; const char *btech; int i; diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c index 07689064996..d412d34bf3d 100644 --- a/drivers/power/ab8500_btemp.c +++ b/drivers/power/ab8500_btemp.c @@ -42,6 +42,9 @@ #define BTEMP_BATCTRL_CURR_SRC_16UA 16 #define BTEMP_BATCTRL_CURR_SRC_18UA 18 +#define BTEMP_BATCTRL_CURR_SRC_60UA 60 +#define BTEMP_BATCTRL_CURR_SRC_120UA 120 + #define to_ab8500_btemp_device_info(x) container_of((x), \ struct ab8500_btemp, btemp_psy); @@ -76,8 +79,8 @@ struct ab8500_btemp_ranges { * @dev: Pointer to the structure device * @node: List of AB8500 BTEMPs, hence prepared for reentrance * @curr_source: What current source we use, in uA - * @bat_temp: Battery temperature in degree Celcius - * @prev_bat_temp Last dispatched battery temperature + * @bat_temp: Dispatched battery temperature in degree Celcius + * @prev_bat_temp Last measured battery temperature in degree Celcius * @parent: Pointer to the struct ab8500 * @gpadc: Pointer to the struct gpadc * @fg: Pointer to the struct fg @@ -128,6 +131,7 @@ struct ab8500_btemp *ab8500_btemp_get(void) return btemp; } +EXPORT_SYMBOL(ab8500_btemp_get); /** * ab8500_btemp_batctrl_volt_to_res() - convert batctrl voltage to resistance @@ -155,7 +159,7 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di, if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL) { /* * If the battery has internal NTC, we use the current - * source to calculate the resistance, 7uA or 20uA + * source to calculate the resistance. */ rbs = (v_batctrl * 1000 - di->bm->gnd_lift_resistance * inst_curr) @@ -216,7 +220,12 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, /* Only do this for batteries with internal NTC */ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) { - if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + if (is_ab8540(di->parent)) { + if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_60UA) + curr = BAT_CTRL_60U_ENA; + else + curr = BAT_CTRL_120U_ENA; + } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) { if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_16UA) curr = BAT_CTRL_16U_ENA; else @@ -257,7 +266,14 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, } else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) { dev_dbg(di->dev, "Disable BATCTRL curr source\n"); - if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + if (is_ab8540(di->parent)) { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible( + di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA, + ~(BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA)); + } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) { /* Write 0 to the curr bits */ ret = abx500_mask_and_set_register_interruptible( di->dev, @@ -314,7 +330,13 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di, * if we got an error above */ disable_curr_source: - if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + if (is_ab8540(di->parent)) { + /* Write 0 to the curr bits */ + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, + BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA, + ~(BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA)); + } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) { /* Write 0 to the curr bits */ ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE, @@ -541,7 +563,9 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) { int res; u8 i; - if (is_ab9540(di->parent) || is_ab8505(di->parent)) + if (is_ab8540(di->parent)) + di->curr_source = BTEMP_BATCTRL_CURR_SRC_60UA; + else if (is_ab9540(di->parent) || is_ab8505(di->parent)) di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA; else di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA; @@ -579,12 +603,17 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) /* * We only have to change current source if the - * detected type is Type 1, else we use the 7uA source + * detected type is Type 1. */ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && - di->bm->batt_id == 1) { - if (is_ab9540(di->parent) || is_ab8505(di->parent)) { - dev_dbg(di->dev, "Set BATCTRL current source to 16uA\n"); + di->bm->batt_id == 1) { + if (is_ab8540(di->parent)) { + dev_dbg(di->dev, + "Set BATCTRL current source to 60uA\n"); + di->curr_source = BTEMP_BATCTRL_CURR_SRC_60UA; + } else if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + dev_dbg(di->dev, + "Set BATCTRL current source to 16uA\n"); di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA; } else { dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n"); @@ -604,22 +633,37 @@ static int ab8500_btemp_id(struct ab8500_btemp *di) static void ab8500_btemp_periodic_work(struct work_struct *work) { int interval; + int bat_temp; struct ab8500_btemp *di = container_of(work, struct ab8500_btemp, btemp_periodic_work.work); if (!di->initialized) { - di->initialized = true; /* Identify the battery */ if (ab8500_btemp_id(di) < 0) dev_warn(di->dev, "failed to identify the battery\n"); } - di->bat_temp = ab8500_btemp_measure_temp(di); - - if (di->bat_temp != di->prev_bat_temp) { - di->prev_bat_temp = di->bat_temp; + bat_temp = ab8500_btemp_measure_temp(di); + /* + * Filter battery temperature. + * Allow direct updates on temperature only if two samples result in + * same temperature. Else only allow 1 degree change from previous + * reported value in the direction of the new measurement. + */ + if ((bat_temp == di->prev_bat_temp) || !di->initialized) { + if ((di->bat_temp != di->prev_bat_temp) || !di->initialized) { + di->initialized = true; + di->bat_temp = bat_temp; + power_supply_changed(&di->btemp_psy); + } + } else if (bat_temp < di->prev_bat_temp) { + di->bat_temp--; + power_supply_changed(&di->btemp_psy); + } else if (bat_temp > di->prev_bat_temp) { + di->bat_temp++; power_supply_changed(&di->btemp_psy); } + di->prev_bat_temp = bat_temp; if (di->events.ac_conn || di->events.usb_conn) interval = di->bm->temp_interval_chg; @@ -772,7 +816,7 @@ static void ab8500_btemp_periodic(struct ab8500_btemp *di, * * Returns battery temperature */ -static int ab8500_btemp_get_temp(struct ab8500_btemp *di) +int ab8500_btemp_get_temp(struct ab8500_btemp *di) { int temp = 0; @@ -808,6 +852,7 @@ static int ab8500_btemp_get_temp(struct ab8500_btemp *di) } return temp; } +EXPORT_SYMBOL(ab8500_btemp_get_temp); /** * ab8500_btemp_get_batctrl_temp() - get the temperature @@ -819,6 +864,7 @@ int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp) { return btemp->bat_temp * 1000; } +EXPORT_SYMBOL(ab8500_btemp_get_batctrl_temp); /** * ab8500_btemp_get_property() - get the btemp properties diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c index 24b30b7ea5c..a558318b169 100644 --- a/drivers/power/ab8500_charger.c +++ b/drivers/power/ab8500_charger.c @@ -15,6 +15,7 @@ #include <linux/device.h> #include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/notifier.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/power_supply.h> @@ -52,10 +53,15 @@ #define VBUS_DET_DBNC100 0x02 #define VBUS_DET_DBNC1 0x01 #define OTP_ENABLE_WD 0x01 +#define DROP_COUNT_RESET 0x01 +#define USB_CH_DET 0x01 #define MAIN_CH_INPUT_CURR_SHIFT 4 #define VBUS_IN_CURR_LIM_SHIFT 4 +#define AB8540_VBUS_IN_CURR_LIM_SHIFT 2 #define AUTO_VBUS_IN_CURR_LIM_SHIFT 4 +#define AB8540_AUTO_VBUS_IN_CURR_MASK 0x3F +#define VBUS_IN_CURR_LIM_RETRY_SET_TIME 30 /* seconds */ #define LED_INDICATOR_PWM_ENA 0x01 #define LED_INDICATOR_PWM_DIS 0x00 @@ -77,7 +83,9 @@ /* UsbLineStatus register bit masks */ #define AB8500_USB_LINK_STATUS 0x78 +#define AB8505_USB_LINK_STATUS 0xF8 #define AB8500_STD_HOST_SUSP 0x18 +#define USB_LINK_STATUS_SHIFT 3 /* Watchdog timeout constant */ #define WD_TIMER 0x30 /* 4min */ @@ -96,6 +104,10 @@ #define AB8500_SW_CONTROL_FALLBACK 0x03 /* Wait for enumeration before charing in us */ #define WAIT_ACA_RID_ENUMERATION (5 * 1000) +/*External charger control*/ +#define AB8500_SYS_CHARGER_CONTROL_REG 0x52 +#define EXTERNAL_CHARGER_DISABLE_REG_VAL 0x03 +#define EXTERNAL_CHARGER_ENABLE_REG_VAL 0x07 /* UsbLineStatus register - usb types */ enum ab8500_charger_link_status { @@ -196,10 +208,15 @@ struct ab8500_charger_usb_state { spinlock_t usb_lock; }; +struct ab8500_charger_max_usb_in_curr { + int usb_type_max; + int set_max; + int calculated_max; +}; + /** * struct ab8500_charger - ab8500 Charger device information * @dev: Pointer to the structure device - * @max_usb_in_curr: Max USB charger input current * @vbus_detected: VBUS detected * @vbus_detected_start: * VBUS detected during startup @@ -214,7 +231,6 @@ struct ab8500_charger_usb_state { * @autopower Indicate if we should have automatic pwron after pwrloss * @autopower_cfg platform specific power config support for "pwron after pwrloss" * @invalid_charger_detect_state State when forcing AB to use invalid charger - * @is_usb_host: Indicate if last detected USB type is host * @is_aca_rid: Incicate if accessory is ACA type * @current_stepping_sessions: * Counter for current stepping sessions @@ -223,6 +239,7 @@ struct ab8500_charger_usb_state { * @bm: Platform specific battery management information * @flags: Structure for information about events triggered * @usb_state: Structure for usb stack information + * @max_usb_in_curr: Max USB charger input current * @ac_chg: AC charger power supply * @usb_chg: USB charger power supply * @ac: Structure that holds the AC charger properties @@ -254,7 +271,6 @@ struct ab8500_charger_usb_state { */ struct ab8500_charger { struct device *dev; - int max_usb_in_curr; bool vbus_detected; bool vbus_detected_start; bool ac_conn; @@ -266,7 +282,6 @@ struct ab8500_charger { bool autopower; bool autopower_cfg; int invalid_charger_detect_state; - bool is_usb_host; int is_aca_rid; atomic_t current_stepping_sessions; struct ab8500 *parent; @@ -274,6 +289,7 @@ struct ab8500_charger { struct abx500_bm_data *bm; struct ab8500_charger_event_flags flags; struct ab8500_charger_usb_state usb_state; + struct ab8500_charger_max_usb_in_curr max_usb_in_curr; struct ux500_charger ac_chg; struct ux500_charger usb_chg; struct ab8500_charger_info ac; @@ -415,13 +431,18 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di, if (connected != di->usb.charger_connected) { dev_dbg(di->dev, "USB connected:%i\n", connected); di->usb.charger_connected = connected; + + if (!connected) + di->flags.vbus_drop_end = false; + sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present"); if (connected) { mutex_lock(&di->charger_attached_mutex); mutex_unlock(&di->charger_attached_mutex); - queue_delayed_work(di->charger_wq, + if (is_ab8500(di->parent)) + queue_delayed_work(di->charger_wq, &di->usb_charger_attached_work, HZ); } else { @@ -668,23 +689,19 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, case USB_STAT_STD_HOST_C_S: dev_dbg(di->dev, "USB Type - Standard host is " "detected through USB driver\n"); - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; - di->is_usb_host = true; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; di->is_aca_rid = 0; break; case USB_STAT_HOST_CHG_HS_CHIRP: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; - di->is_usb_host = true; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; di->is_aca_rid = 0; break; case USB_STAT_HOST_CHG_HS: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; - di->is_usb_host = true; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; di->is_aca_rid = 0; break; case USB_STAT_ACA_RID_C_HS: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9; - di->is_usb_host = false; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P9; di->is_aca_rid = 0; break; case USB_STAT_ACA_RID_A: @@ -693,8 +710,7 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, * can consume (900mA). Closest level is 500mA */ dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n"); - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; - di->is_usb_host = false; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; di->is_aca_rid = 1; break; case USB_STAT_ACA_RID_B: @@ -702,38 +718,35 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, * Dedicated charger level minus 120mA (20mA for ACA and * 100mA for potential accessory). Closest level is 1300mA */ - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P3; dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, - di->max_usb_in_curr); - di->is_usb_host = false; + di->max_usb_in_curr.usb_type_max); di->is_aca_rid = 1; break; case USB_STAT_HOST_CHG_NM: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; - di->is_usb_host = true; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; di->is_aca_rid = 0; break; case USB_STAT_DEDICATED_CHG: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; - di->is_usb_host = false; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5; di->is_aca_rid = 0; break; case USB_STAT_ACA_RID_C_HS_CHIRP: case USB_STAT_ACA_RID_C_NM: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; - di->is_usb_host = false; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5; di->is_aca_rid = 1; break; case USB_STAT_NOT_CONFIGURED: if (di->vbus_detected) { di->usb_device_is_unrecognised = true; dev_dbg(di->dev, "USB Type - Legacy charger.\n"); - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5; + di->max_usb_in_curr.usb_type_max = + USB_CH_IP_CUR_LVL_1P5; break; } case USB_STAT_HM_IDGND: dev_err(di->dev, "USB Type - Charging not allowed\n"); - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05; ret = -ENXIO; break; case USB_STAT_RESERVED: @@ -743,12 +756,13 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, "VBUS has collapsed\n"); ret = -ENXIO; break; - } - if (is_ab9540(di->parent) || is_ab8505(di->parent)) { + } else { dev_dbg(di->dev, "USB Type - Charging not allowed\n"); - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + di->max_usb_in_curr.usb_type_max = + USB_CH_IP_CUR_LVL_0P05; dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", - link_status, di->max_usb_in_curr); + link_status, + di->max_usb_in_curr.usb_type_max); ret = -ENXIO; break; } @@ -757,23 +771,24 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di, case USB_STAT_CARKIT_2: case USB_STAT_ACA_DOCK_CHARGER: case USB_STAT_CHARGER_LINE_1: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status, - di->max_usb_in_curr); + di->max_usb_in_curr.usb_type_max); case USB_STAT_NOT_VALID_LINK: dev_err(di->dev, "USB Type invalid - try charging anyway\n"); - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; break; default: dev_err(di->dev, "USB Type - Unknown\n"); - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05; ret = -ENXIO; break; }; + di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max; dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", - link_status, di->max_usb_in_curr); + link_status, di->max_usb_in_curr.set_max); return ret; } @@ -796,21 +811,22 @@ static int ab8500_charger_read_usb_type(struct ab8500_charger *di) dev_err(di->dev, "%s ab8500 read failed\n", __func__); return ret; } - if (is_ab8500(di->parent)) { + if (is_ab8500(di->parent)) ret = abx500_get_register_interruptible(di->dev, AB8500_USB, - AB8500_USB_LINE_STAT_REG, &val); - } else { - if (is_ab9540(di->parent) || is_ab8505(di->parent)) - ret = abx500_get_register_interruptible(di->dev, - AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val); - } + AB8500_USB_LINE_STAT_REG, &val); + else + ret = abx500_get_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val); if (ret < 0) { dev_err(di->dev, "%s ab8500 read failed\n", __func__); return ret; } /* get the USB type */ - val = (val & AB8500_USB_LINK_STATUS) >> 3; + if (is_ab8500(di->parent)) + val = (val & AB8500_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT; + else + val = (val & AB8505_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT; ret = ab8500_charger_max_usb_curr(di, (enum ab8500_charger_link_status) val); @@ -865,7 +881,12 @@ static int ab8500_charger_detect_usb_type(struct ab8500_charger *di) */ /* get the USB type */ - val = (val & AB8500_USB_LINK_STATUS) >> 3; + if (is_ab8500(di->parent)) + val = (val & AB8500_USB_LINK_STATUS) >> + USB_LINK_STATUS_SHIFT; + else + val = (val & AB8505_USB_LINK_STATUS) >> + USB_LINK_STATUS_SHIFT; if (val) break; } @@ -960,51 +981,6 @@ static int ab8500_charger_voltage_map[] = { 4600 , }; -/* - * This array maps the raw hex value to charger current used by the AB8500 - * Values taken from the UM0836 - */ -static int ab8500_charger_current_map[] = { - 100 , - 200 , - 300 , - 400 , - 500 , - 600 , - 700 , - 800 , - 900 , - 1000 , - 1100 , - 1200 , - 1300 , - 1400 , - 1500 , -}; - -/* - * This array maps the raw hex value to VBUS input current used by the AB8500 - * Values taken from the UM0836 - */ -static int ab8500_charger_vbus_in_curr_map[] = { - USB_CH_IP_CUR_LVL_0P05, - USB_CH_IP_CUR_LVL_0P09, - USB_CH_IP_CUR_LVL_0P19, - USB_CH_IP_CUR_LVL_0P29, - USB_CH_IP_CUR_LVL_0P38, - USB_CH_IP_CUR_LVL_0P45, - USB_CH_IP_CUR_LVL_0P5, - USB_CH_IP_CUR_LVL_0P6, - USB_CH_IP_CUR_LVL_0P7, - USB_CH_IP_CUR_LVL_0P8, - USB_CH_IP_CUR_LVL_0P9, - USB_CH_IP_CUR_LVL_1P0, - USB_CH_IP_CUR_LVL_1P1, - USB_CH_IP_CUR_LVL_1P3, - USB_CH_IP_CUR_LVL_1P4, - USB_CH_IP_CUR_LVL_1P5, -}; - static int ab8500_voltage_to_regval(int voltage) { int i; @@ -1026,41 +1002,41 @@ static int ab8500_voltage_to_regval(int voltage) return -1; } -static int ab8500_current_to_regval(int curr) +static int ab8500_current_to_regval(struct ab8500_charger *di, int curr) { int i; - if (curr < ab8500_charger_current_map[0]) + if (curr < di->bm->chg_output_curr[0]) return 0; - for (i = 0; i < ARRAY_SIZE(ab8500_charger_current_map); i++) { - if (curr < ab8500_charger_current_map[i]) + for (i = 0; i < di->bm->n_chg_out_curr; i++) { + if (curr < di->bm->chg_output_curr[i]) return i - 1; } /* If not last element, return error */ - i = ARRAY_SIZE(ab8500_charger_current_map) - 1; - if (curr == ab8500_charger_current_map[i]) + i = di->bm->n_chg_out_curr - 1; + if (curr == di->bm->chg_output_curr[i]) return i; else return -1; } -static int ab8500_vbus_in_curr_to_regval(int curr) +static int ab8500_vbus_in_curr_to_regval(struct ab8500_charger *di, int curr) { int i; - if (curr < ab8500_charger_vbus_in_curr_map[0]) + if (curr < di->bm->chg_input_curr[0]) return 0; - for (i = 0; i < ARRAY_SIZE(ab8500_charger_vbus_in_curr_map); i++) { - if (curr < ab8500_charger_vbus_in_curr_map[i]) + for (i = 0; i < di->bm->n_chg_in_curr; i++) { + if (curr < di->bm->chg_input_curr[i]) return i - 1; } /* If not last element, return error */ - i = ARRAY_SIZE(ab8500_charger_vbus_in_curr_map) - 1; - if (curr == ab8500_charger_vbus_in_curr_map[i]) + i = di->bm->n_chg_in_curr - 1; + if (curr == di->bm->chg_input_curr[i]) return i; else return -1; @@ -1077,28 +1053,48 @@ static int ab8500_vbus_in_curr_to_regval(int curr) */ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) { + int ret = 0; switch (di->usb_state.usb_current) { case 100: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P09; break; case 200: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P19; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P19; break; case 300: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P29; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P29; break; case 400: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P38; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P38; break; case 500: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5; break; default: - di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05; - return -1; + di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05; + ret = -EPERM; break; }; - return 0; + di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max; + return ret; +} + +/** + * ab8500_charger_check_continue_stepping() - Check to allow stepping + * @di: pointer to the ab8500_charger structure + * @reg: select what charger register to check + * + * Check if current stepping should be allowed to continue. + * Checks if charger source has not collapsed. If it has, further stepping + * is not allowed. + */ +static bool ab8500_charger_check_continue_stepping(struct ab8500_charger *di, + int reg) +{ + if (reg == AB8500_USBCH_IPT_CRNTLVL_REG) + return !di->flags.vbus_drop_end; + else + return true; } /** @@ -1118,7 +1114,7 @@ static int ab8500_charger_set_current(struct ab8500_charger *di, int ich, int reg) { int ret = 0; - int auto_curr_index, curr_index, prev_curr_index, shift_value, i; + int curr_index, prev_curr_index, shift_value, i; u8 reg_value; u32 step_udelay; bool no_stepping = false; @@ -1136,39 +1132,27 @@ static int ab8500_charger_set_current(struct ab8500_charger *di, case AB8500_MCH_IPT_CURLVL_REG: shift_value = MAIN_CH_INPUT_CURR_SHIFT; prev_curr_index = (reg_value >> shift_value); - curr_index = ab8500_current_to_regval(ich); + curr_index = ab8500_current_to_regval(di, ich); step_udelay = STEP_UDELAY; if (!di->ac.charger_connected) no_stepping = true; break; case AB8500_USBCH_IPT_CRNTLVL_REG: - shift_value = VBUS_IN_CURR_LIM_SHIFT; + if (is_ab8540(di->parent)) + shift_value = AB8540_VBUS_IN_CURR_LIM_SHIFT; + else + shift_value = VBUS_IN_CURR_LIM_SHIFT; prev_curr_index = (reg_value >> shift_value); - curr_index = ab8500_vbus_in_curr_to_regval(ich); + curr_index = ab8500_vbus_in_curr_to_regval(di, ich); step_udelay = STEP_UDELAY * 100; - ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_CH_USBCH_STAT2_REG, ®_value); - if (ret < 0) { - dev_err(di->dev, "%s read failed\n", __func__); - goto exit_set_current; - } - auto_curr_index = - reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT; - - dev_dbg(di->dev, "%s Auto VBUS curr is %d mA\n", - __func__, - ab8500_charger_vbus_in_curr_map[auto_curr_index]); - - prev_curr_index = min(prev_curr_index, auto_curr_index); - if (!di->usb.charger_connected) no_stepping = true; break; case AB8500_CH_OPT_CRNTLVL_REG: shift_value = 0; prev_curr_index = (reg_value >> shift_value); - curr_index = ab8500_current_to_regval(ich); + curr_index = ab8500_current_to_regval(di, ich); step_udelay = STEP_UDELAY; if (curr_index && (curr_index - prev_curr_index) > 1) step_udelay *= 100; @@ -1219,7 +1203,8 @@ static int ab8500_charger_set_current(struct ab8500_charger *di, usleep_range(step_udelay, step_udelay * 2); } } else { - for (i = prev_curr_index + 1; i <= curr_index; i++) { + bool allow = true; + for (i = prev_curr_index + 1; i <= curr_index && allow; i++) { dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n", (u8)i << shift_value, reg); ret = abx500_set_register_interruptible(di->dev, @@ -1230,6 +1215,8 @@ static int ab8500_charger_set_current(struct ab8500_charger *di, } if (i != curr_index) usleep_range(step_udelay, step_udelay * 2); + + allow = ab8500_charger_check_continue_stepping(di, reg); } } @@ -1255,6 +1242,11 @@ static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, /* We should always use to lowest current limit */ min_value = min(di->bm->chg_params->usb_curr_max, ich_in); + if (di->max_usb_in_curr.set_max > 0) + min_value = min(di->max_usb_in_curr.set_max, min_value); + + if (di->usb_state.usb_current >= 0) + min_value = min(di->usb_state.usb_current, min_value); switch (min_value) { case 100: @@ -1400,8 +1392,8 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, /* Check if the requested voltage or current is valid */ volt_index = ab8500_voltage_to_regval(vset); - curr_index = ab8500_current_to_regval(iset); - input_curr_index = ab8500_current_to_regval( + curr_index = ab8500_current_to_regval(di, iset); + input_curr_index = ab8500_current_to_regval(di, di->bm->chg_params->ac_curr_max); if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) { dev_err(di->dev, @@ -1572,7 +1564,7 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, /* Check if the requested voltage or current is valid */ volt_index = ab8500_voltage_to_regval(vset); - curr_index = ab8500_current_to_regval(ich_out); + curr_index = ab8500_current_to_regval(di, ich_out); if (volt_index < 0 || curr_index < 0) { dev_err(di->dev, "Charger voltage or current too high, " @@ -1609,7 +1601,8 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, di->usb.charger_online = 1; /* USBChInputCurr: current that can be drawn from the usb */ - ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + ret = ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr.usb_type_max); if (ret) { dev_err(di->dev, "setting USBChInputCurr failed\n"); return ret; @@ -1668,8 +1661,7 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, dev_dbg(di->dev, "%s Disabled USB charging\n", __func__); /* Cancel any pending Vbat check work */ - if (delayed_work_pending(&di->check_vbat_work)) - cancel_delayed_work(&di->check_vbat_work); + cancel_delayed_work(&di->check_vbat_work); } ab8500_power_supply_changed(di, &di->usb_chg.psy); @@ -1677,6 +1669,128 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, return ret; } +static int ab8500_external_charger_prepare(struct notifier_block *charger_nb, + unsigned long event, void *data) +{ + int ret; + struct device *dev = data; + /*Toggle External charger control pin*/ + ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK, + AB8500_SYS_CHARGER_CONTROL_REG, + EXTERNAL_CHARGER_DISABLE_REG_VAL); + if (ret < 0) { + dev_err(dev, "write reg failed %d\n", ret); + goto out; + } + ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK, + AB8500_SYS_CHARGER_CONTROL_REG, + EXTERNAL_CHARGER_ENABLE_REG_VAL); + if (ret < 0) + dev_err(dev, "Write reg failed %d\n", ret); + +out: + return ret; +} + +/** + * ab8500_charger_usb_check_enable() - enable usb charging + * @charger: pointer to the ux500_charger structure + * @vset: charging voltage + * @iset: charger output current + * + * Check if the VBUS charger has been disconnected and reconnected without + * AB8500 rising an interrupt. Returns 0 on success. + */ +static int ab8500_charger_usb_check_enable(struct ux500_charger *charger, + int vset, int iset) +{ + u8 usbch_ctrl1 = 0; + int ret = 0; + + struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger); + + if (!di->usb.charger_connected) + return ret; + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_USBCH_CTRL1_REG, &usbch_ctrl1); + if (ret < 0) { + dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); + return ret; + } + dev_dbg(di->dev, "USB charger ctrl: 0x%02x\n", usbch_ctrl1); + + if (!(usbch_ctrl1 & USB_CH_ENA)) { + dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n"); + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CHARGER_CTRL, + DROP_COUNT_RESET, DROP_COUNT_RESET); + if (ret < 0) { + dev_err(di->dev, "ab8500 write failed %d\n", __LINE__); + return ret; + } + + ret = ab8500_charger_usb_en(&di->usb_chg, true, vset, iset); + if (ret < 0) { + dev_err(di->dev, "Failed to enable VBUS charger %d\n", + __LINE__); + return ret; + } + } + return ret; +} + +/** + * ab8500_charger_ac_check_enable() - enable usb charging + * @charger: pointer to the ux500_charger structure + * @vset: charging voltage + * @iset: charger output current + * + * Check if the AC charger has been disconnected and reconnected without + * AB8500 rising an interrupt. Returns 0 on success. + */ +static int ab8500_charger_ac_check_enable(struct ux500_charger *charger, + int vset, int iset) +{ + u8 mainch_ctrl1 = 0; + int ret = 0; + + struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger); + + if (!di->ac.charger_connected) + return ret; + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_MCH_CTRL1, &mainch_ctrl1); + if (ret < 0) { + dev_err(di->dev, "ab8500 read failed %d\n", __LINE__); + return ret; + } + dev_dbg(di->dev, "AC charger ctrl: 0x%02x\n", mainch_ctrl1); + + if (!(mainch_ctrl1 & MAIN_CH_ENA)) { + dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n"); + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CHARGER_CTRL, + DROP_COUNT_RESET, DROP_COUNT_RESET); + + if (ret < 0) { + dev_err(di->dev, "ab8500 write failed %d\n", __LINE__); + return ret; + } + + ret = ab8500_charger_ac_en(&di->usb_chg, true, vset, iset); + if (ret < 0) { + dev_err(di->dev, "failed to enable AC charger %d\n", + __LINE__); + return ret; + } + } + return ret; +} + /** * ab8500_charger_watchdog_kick() - kick charger watchdog * @di: pointer to the ab8500_charger structure @@ -1734,8 +1848,68 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger, /* Reset the main and usb drop input current measurement counter */ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_CHARGER_CTRL, - 0x1); + AB8500_CHARGER_CTRL, DROP_COUNT_RESET); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + return ret; +} + +/** + * ab8540_charger_power_path_enable() - enable usb power path mode + * @charger: pointer to the ux500_charger structure + * @enable: enable/disable flag + * + * Enable or disable the power path for usb mode + * Returns error code in case of failure else 0(on success) + */ +static int ab8540_charger_power_path_enable(struct ux500_charger *charger, + bool enable) +{ + int ret; + struct ab8500_charger *di; + + if (charger->psy.type == POWER_SUPPLY_TYPE_USB) + di = to_ab8500_charger_usb_device_info(charger); + else + return -ENXIO; + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8540_USB_PP_MODE_REG, + BUS_POWER_PATH_MODE_ENA, enable); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + + return ret; +} + + +/** + * ab8540_charger_usb_pre_chg_enable() - enable usb pre change + * @charger: pointer to the ux500_charger structure + * @enable: enable/disable flag + * + * Enable or disable the pre-chage for usb mode + * Returns error code in case of failure else 0(on success) + */ +static int ab8540_charger_usb_pre_chg_enable(struct ux500_charger *charger, + bool enable) +{ + int ret; + struct ab8500_charger *di; + + if (charger->psy.type == POWER_SUPPLY_TYPE_USB) + di = to_ab8500_charger_usb_device_info(charger); + else + return -ENXIO; + + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8540_USB_PP_CHR_REG, + BUS_POWER_PATH_PRECHG_ENA, enable); if (ret) { dev_err(di->dev, "%s write failed\n", __func__); return ret; @@ -1823,9 +1997,10 @@ static void ab8500_charger_check_vbat_work(struct work_struct *work) di->vbat > VBAT_TRESH_IP_CUR_RED))) { dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d," - " old: %d\n", di->max_usb_in_curr, di->vbat, - di->old_vbat); - ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + " old: %d\n", di->max_usb_in_curr.usb_type_max, + di->vbat, di->old_vbat); + ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr.usb_type_max); power_supply_changed(&di->usb_chg.psy); } @@ -2105,7 +2280,8 @@ static void ab8500_charger_usb_link_attach_work(struct work_struct *work) /* Update maximum input current if USB enumeration is not detected */ if (!di->usb.charger_online) { - ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + ret = ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr.usb_type_max); if (ret) return; } @@ -2125,6 +2301,7 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work) int detected_chargers; int ret; u8 val; + u8 link_status; struct ab8500_charger *di = container_of(work, struct ab8500_charger, usb_link_status_work); @@ -2144,38 +2321,61 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work) * to start the charging process. but by jumping * thru a few hoops it can be forced to start. */ - ret = abx500_get_register_interruptible(di->dev, AB8500_USB, - AB8500_USB_LINE_STAT_REG, &val); + if (is_ab8500(di->parent)) + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINE_STAT_REG, &val); + else + ret = abx500_get_register_interruptible(di->dev, AB8500_USB, + AB8500_USB_LINK1_STAT_REG, &val); + if (ret >= 0) dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val); else dev_dbg(di->dev, "Error reading USB link status\n"); + if (is_ab8500(di->parent)) + link_status = AB8500_USB_LINK_STATUS; + else + link_status = AB8505_USB_LINK_STATUS; + if (detected_chargers & USB_PW_CONN) { - if (((val & AB8500_USB_LINK_STATUS) >> 3) == USB_STAT_NOT_VALID_LINK && + if (((val & link_status) >> USB_LINK_STATUS_SHIFT) == + USB_STAT_NOT_VALID_LINK && di->invalid_charger_detect_state == 0) { - dev_dbg(di->dev, "Invalid charger detected, state= 0\n"); + dev_dbg(di->dev, + "Invalid charger detected, state= 0\n"); /*Enable charger*/ abx500_mask_and_set_register_interruptible(di->dev, - AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, 0x01, 0x01); + AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, + USB_CH_ENA, USB_CH_ENA); /*Enable charger detection*/ - abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB, - AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x01); + abx500_mask_and_set_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINE_CTRL2_REG, + USB_CH_DET, USB_CH_DET); di->invalid_charger_detect_state = 1; /*exit and wait for new link status interrupt.*/ return; } if (di->invalid_charger_detect_state == 1) { - dev_dbg(di->dev, "Invalid charger detected, state= 1\n"); + dev_dbg(di->dev, + "Invalid charger detected, state= 1\n"); /*Stop charger detection*/ - abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB, - AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x00); + abx500_mask_and_set_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINE_CTRL2_REG, + USB_CH_DET, 0x00); /*Check link status*/ - ret = abx500_get_register_interruptible(di->dev, AB8500_USB, - AB8500_USB_LINE_STAT_REG, &val); + if (is_ab8500(di->parent)) + ret = abx500_get_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINE_STAT_REG, + &val); + else + ret = abx500_get_register_interruptible(di->dev, + AB8500_USB, AB8500_USB_LINK1_STAT_REG, + &val); + dev_dbg(di->dev, "USB link status= 0x%02x\n", - (val & AB8500_USB_LINK_STATUS) >> 3); + (val & link_status) >> USB_LINK_STATUS_SHIFT); di->invalid_charger_detect_state = 2; } } else { @@ -2273,7 +2473,7 @@ static void ab8500_charger_usb_state_changed_work(struct work_struct *work) if (!ab8500_charger_get_usb_cur(di)) { /* Update maximum input current */ ret = ab8500_charger_set_vbus_in_curr(di, - di->max_usb_in_curr); + di->max_usb_in_curr.usb_type_max); if (ret) return; @@ -2422,7 +2622,9 @@ static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di) mutex_lock(&di->charger_attached_mutex); mutex_unlock(&di->charger_attached_mutex); - queue_delayed_work(di->charger_wq, + + if (is_ab8500(di->parent)) + queue_delayed_work(di->charger_wq, &di->ac_charger_attached_work, HZ); return IRQ_HANDLED; @@ -2491,6 +2693,8 @@ static void ab8500_charger_vbus_drop_end_work(struct work_struct *work) { struct ab8500_charger *di = container_of(work, struct ab8500_charger, vbus_drop_end_work.work); + int ret, curr; + u8 reg_value; di->flags.vbus_drop_end = false; @@ -2498,8 +2702,45 @@ static void ab8500_charger_vbus_drop_end_work(struct work_struct *work) abx500_set_register_interruptible(di->dev, AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01); + if (is_ab8540(di->parent)) + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8540_CH_USBCH_STAT3_REG, ®_value); + else + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + AB8500_CH_USBCH_STAT2_REG, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s read failed\n", __func__); + return; + } + + if (is_ab8540(di->parent)) + curr = di->bm->chg_input_curr[ + reg_value & AB8540_AUTO_VBUS_IN_CURR_MASK]; + else + curr = di->bm->chg_input_curr[ + reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT]; + + if (di->max_usb_in_curr.calculated_max != curr) { + /* USB source is collapsing */ + di->max_usb_in_curr.calculated_max = curr; + dev_dbg(di->dev, + "VBUS input current limiting to %d mA\n", + di->max_usb_in_curr.calculated_max); + } else { + /* + * USB source can not give more than this amount. + * Taking more will collapse the source. + */ + di->max_usb_in_curr.set_max = + di->max_usb_in_curr.calculated_max; + dev_dbg(di->dev, + "VBUS input current limited to %d mA\n", + di->max_usb_in_curr.set_max); + } + if (di->usb.charger_connected) - ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr); + ab8500_charger_set_vbus_in_curr(di, + di->max_usb_in_curr.usb_type_max); } /** @@ -2654,8 +2895,13 @@ static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di) dev_dbg(di->dev, "VBUS charger drop ended\n"); di->flags.vbus_drop_end = true; + + /* + * VBUS might have dropped due to bad connection. + * Schedule a new input limit set to the value SW requests. + */ queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, - round_jiffies(30 * HZ)); + round_jiffies(VBUS_IN_CURR_LIM_RETRY_SET_TIME * HZ)); return IRQ_HANDLED; } @@ -2836,6 +3082,7 @@ static int ab8500_charger_usb_get_property(struct power_supply *psy, static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) { int ret = 0; + u8 bup_vch_range = 0, vbup33_vrtcn = 0; /* Setup maximum charger current and voltage for ABB cut2.0 */ if (!is_ab8500_1p1_or_earlier(di->parent)) { @@ -2848,9 +3095,14 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) goto out; } - ret = abx500_set_register_interruptible(di->dev, - AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_MAX_REG, CH_OP_CUR_LVL_1P6); + if (is_ab8540(di->parent)) + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG, + CH_OP_CUR_LVL_2P); + else + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG, + CH_OP_CUR_LVL_1P6); if (ret) { dev_err(di->dev, "failed to set CH_OPT_CRNTLVL_MAX_REG\n"); @@ -2858,7 +3110,8 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) } } - if (is_ab9540_2p0(di->parent) || is_ab8505_2p0(di->parent)) + if (is_ab9540_2p0(di->parent) || is_ab9540_3p0(di->parent) + || is_ab8505_2p0(di->parent) || is_ab8540(di->parent)) ret = abx500_mask_and_set_register_interruptible(di->dev, AB8500_CHARGER, AB8500_USBCH_CTRL2_REG, @@ -2930,14 +3183,6 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) goto out; } - /* Set charger watchdog timeout */ - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_CH_WD_TIMER_REG, WD_TIMER); - if (ret) { - dev_err(di->dev, "failed to set charger watchdog timeout\n"); - goto out; - } - ret = ab8500_charger_led_en(di, false); if (ret < 0) { dev_err(di->dev, "failed to disable LED\n"); @@ -2945,15 +3190,30 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) } /* Backup battery voltage and current */ + if (di->bm->bkup_bat_v > BUP_VCH_SEL_3P1V) + bup_vch_range = BUP_VCH_RANGE; + if (di->bm->bkup_bat_v == BUP_VCH_SEL_3P3V) + vbup33_vrtcn = VBUP33_VRTCN; + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, AB8500_RTC_BACKUP_CHG_REG, - di->bm->bkup_bat_v | - di->bm->bkup_bat_i); + (di->bm->bkup_bat_v & 0x3) | di->bm->bkup_bat_i); if (ret) { dev_err(di->dev, "failed to setup backup battery charging\n"); goto out; } + if (is_ab8540(di->parent)) { + ret = abx500_set_register_interruptible(di->dev, + AB8500_RTC, + AB8500_RTC_CTRL1_REG, + bup_vch_range | vbup33_vrtcn); + if (ret) { + dev_err(di->dev, + "failed to setup backup battery charging\n"); + goto out; + } + } /* Enable backup battery charging */ abx500_mask_and_set_register_interruptible(di->dev, @@ -2962,6 +3222,25 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di) if (ret < 0) dev_err(di->dev, "%s mask and set failed\n", __func__); + if (is_ab8540(di->parent)) { + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8540_USB_PP_MODE_REG, + BUS_VSYS_VOL_SELECT_MASK, BUS_VSYS_VOL_SELECT_3P6V); + if (ret) { + dev_err(di->dev, + "failed to setup usb power path vsys voltage\n"); + goto out; + } + ret = abx500_mask_and_set_register_interruptible(di->dev, + AB8500_CHARGER, AB8540_USB_PP_CHR_REG, + BUS_PP_PRECHG_CURRENT_MASK, 0); + if (ret) { + dev_err(di->dev, + "failed to setup usb power path prechage current\n"); + goto out; + } + } + out: return ret; } @@ -3055,11 +3334,8 @@ static int ab8500_charger_resume(struct platform_device *pdev) dev_err(di->dev, "Failed to kick WD!\n"); /* If not already pending start a new timer */ - if (!delayed_work_pending( - &di->kick_wd_work)) { - queue_delayed_work(di->charger_wq, &di->kick_wd_work, - round_jiffies(WD_KICK_INTERVAL)); - } + queue_delayed_work(di->charger_wq, &di->kick_wd_work, + round_jiffies(WD_KICK_INTERVAL)); } /* If we still have a HW failure, schedule a new check */ @@ -3079,12 +3355,9 @@ static int ab8500_charger_suspend(struct platform_device *pdev, { struct ab8500_charger *di = platform_get_drvdata(pdev); - /* Cancel any pending HW failure check */ - if (delayed_work_pending(&di->check_hw_failure_work)) - cancel_delayed_work(&di->check_hw_failure_work); - - if (delayed_work_pending(&di->vbus_drop_end_work)) - cancel_delayed_work(&di->vbus_drop_end_work); + /* Cancel any pending jobs */ + cancel_delayed_work(&di->check_hw_failure_work); + cancel_delayed_work(&di->vbus_drop_end_work); flush_delayed_work(&di->attach_work); flush_delayed_work(&di->usb_charger_attached_work); @@ -3107,6 +3380,10 @@ static int ab8500_charger_suspend(struct platform_device *pdev, #define ab8500_charger_resume NULL #endif +static struct notifier_block charger_nb = { + .notifier_call = ab8500_external_charger_prepare, +}; + static int ab8500_charger_remove(struct platform_device *pdev) { struct ab8500_charger *di = platform_get_drvdata(pdev); @@ -3136,13 +3413,18 @@ static int ab8500_charger_remove(struct platform_device *pdev) /* Delete the work queue */ destroy_workqueue(di->charger_wq); + /* Unregister external charger enable notifier */ + if (!di->ac_chg.enabled) + blocking_notifier_chain_unregister( + &charger_notifier_list, &charger_nb); + flush_scheduled_work(); - if(di->usb_chg.enabled) + if (di->usb_chg.enabled) power_supply_unregister(&di->usb_chg.psy); -#if !defined(CONFIG_CHARGER_PM2301) - if(di->ac_chg.enabled) + + if (di->ac_chg.enabled && !di->ac_chg.external) power_supply_unregister(&di->ac_chg.psy); -#endif + platform_set_drvdata(pdev, NULL); return 0; @@ -3206,16 +3488,22 @@ static int ab8500_charger_probe(struct platform_device *pdev) di->ac_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface), /* ux500_charger sub-class */ di->ac_chg.ops.enable = &ab8500_charger_ac_en; + di->ac_chg.ops.check_enable = &ab8500_charger_ac_check_enable; di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current; di->ac_chg.max_out_volt = ab8500_charger_voltage_map[ ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; - di->ac_chg.max_out_curr = ab8500_charger_current_map[ - ARRAY_SIZE(ab8500_charger_current_map) - 1]; + di->ac_chg.max_out_curr = + di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1]; di->ac_chg.wdt_refresh = CHG_WD_INTERVAL; di->ac_chg.enabled = di->bm->ac_enabled; di->ac_chg.external = false; + /*notifier for external charger enabling*/ + if (!di->ac_chg.enabled) + blocking_notifier_chain_register( + &charger_notifier_list, &charger_nb); + /* USB supply */ /* power_supply base class */ di->usb_chg.psy.name = "ab8500_usb"; @@ -3227,15 +3515,20 @@ static int ab8500_charger_probe(struct platform_device *pdev) di->usb_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface), /* ux500_charger sub-class */ di->usb_chg.ops.enable = &ab8500_charger_usb_en; + di->usb_chg.ops.check_enable = &ab8500_charger_usb_check_enable; di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick; di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current; + di->usb_chg.ops.pp_enable = &ab8540_charger_power_path_enable; + di->usb_chg.ops.pre_chg_enable = &ab8540_charger_usb_pre_chg_enable; di->usb_chg.max_out_volt = ab8500_charger_voltage_map[ ARRAY_SIZE(ab8500_charger_voltage_map) - 1]; - di->usb_chg.max_out_curr = ab8500_charger_current_map[ - ARRAY_SIZE(ab8500_charger_current_map) - 1]; + di->usb_chg.max_out_curr = + di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1]; di->usb_chg.wdt_refresh = CHG_WD_INTERVAL; di->usb_chg.enabled = di->bm->usb_enabled; di->usb_chg.external = false; + di->usb_chg.power_path = di->bm->usb_power_path; + di->usb_state.usb_current = -1; /* Create a work queue for the charger */ di->charger_wq = @@ -3316,7 +3609,7 @@ static int ab8500_charger_probe(struct platform_device *pdev) } /* Register AC charger class */ - if(di->ac_chg.enabled) { + if (di->ac_chg.enabled) { ret = power_supply_register(di->dev, &di->ac_chg.psy); if (ret) { dev_err(di->dev, "failed to register AC charger\n"); @@ -3325,7 +3618,7 @@ static int ab8500_charger_probe(struct platform_device *pdev) } /* Register USB charger class */ - if(di->usb_chg.enabled) { + if (di->usb_chg.enabled) { ret = power_supply_register(di->dev, &di->usb_chg.psy); if (ret) { dev_err(di->dev, "failed to register USB charger\n"); @@ -3385,14 +3678,16 @@ static int ab8500_charger_probe(struct platform_device *pdev) ch_stat = ab8500_charger_detect_chargers(di, false); if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) { - queue_delayed_work(di->charger_wq, - &di->ac_charger_attached_work, - HZ); + if (is_ab8500(di->parent)) + queue_delayed_work(di->charger_wq, + &di->ac_charger_attached_work, + HZ); } if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) { - queue_delayed_work(di->charger_wq, - &di->usb_charger_attached_work, - HZ); + if (is_ab8500(di->parent)) + queue_delayed_work(di->charger_wq, + &di->usb_charger_attached_work, + HZ); } mutex_unlock(&di->charger_attached_mutex); @@ -3410,10 +3705,10 @@ free_irq: put_usb_phy: usb_put_phy(di->usb_phy); free_usb: - if(di->usb_chg.enabled) + if (di->usb_chg.enabled) power_supply_unregister(&di->usb_chg.psy); free_ac: - if(di->ac_chg.enabled) + if (di->ac_chg.enabled) power_supply_unregister(&di->ac_chg.psy); free_charger_wq: destroy_workqueue(di->charger_wq); diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c index 25dae4c4b0e..c5391f5c372 100644 --- a/drivers/power/ab8500_fg.c +++ b/drivers/power/ab8500_fg.c @@ -36,7 +36,7 @@ #define MILLI_TO_MICRO 1000 #define FG_LSB_IN_MA 1627 -#define QLSB_NANO_AMP_HOURS_X10 1129 +#define QLSB_NANO_AMP_HOURS_X10 1071 #define INS_CURR_TIMEOUT (3 * HZ) #define SEC_TO_SAMPLE(S) (S * 4) @@ -672,11 +672,11 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) /* * Convert to unit value in mA * Full scale input voltage is - * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA + * 63.160mV => LSB = 63.160mV/(4096*res) = 1.542mA * Given a 250ms conversion cycle time the LSB corresponds - * to 112.9 nAh. Convert to current by dividing by the conversion + * to 107.1 nAh. Convert to current by dividing by the conversion * time in hours (250ms = 1 / (3600 * 4)h) - * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm + * 107.1nAh assumes 10mOhm, but fg_res is in 0.1mOhm */ val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) / (1000 * di->bm->fg_res); @@ -863,7 +863,7 @@ static int ab8500_fg_bat_voltage(struct ab8500_fg *di) static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage) { int i, tbl_size; - struct abx500_v_to_cap *tbl; + const struct abx500_v_to_cap *tbl; int cap = 0; tbl = di->bm->bat_type[di->bm->batt_id].v_to_cap_tbl, @@ -915,7 +915,7 @@ static int ab8500_fg_uncomp_volt_to_capacity(struct ab8500_fg *di) static int ab8500_fg_battery_resistance(struct ab8500_fg *di) { int i, tbl_size; - struct batres_vs_temp *tbl; + const struct batres_vs_temp *tbl; int resist = 0; tbl = di->bm->bat_type[di->bm->batt_id].batres_tbl; @@ -1354,9 +1354,6 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init) * algorithm says. */ di->bat_cap.prev_percent = 1; - di->bat_cap.permille = 1; - di->bat_cap.prev_mah = 1; - di->bat_cap.mah = 1; percent = 1; changed = true; @@ -1683,7 +1680,6 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di) break; case AB8500_FG_DISCHARGE_WAKEUP: - ab8500_fg_coulomb_counter(di, true); ab8500_fg_calc_cap_discharge_voltage(di, true); di->fg_samples = SEC_TO_SAMPLE( @@ -1768,9 +1764,10 @@ static void ab8500_fg_algorithm(struct ab8500_fg *di) ab8500_fg_algorithm_discharging(di); } - dev_dbg(di->dev, "[FG_DATA] %d %d %d %d %d %d %d %d %d " + dev_dbg(di->dev, "[FG_DATA] %d %d %d %d %d %d %d %d %d %d " "%d %d %d %d %d %d %d\n", di->bat_cap.max_mah_design, + di->bat_cap.max_mah, di->bat_cap.mah, di->bat_cap.permille, di->bat_cap.level, @@ -1982,7 +1979,7 @@ static void ab8500_fg_instant_work(struct work_struct *work) } /** - * ab8500_fg_cc_data_end_handler() - isr to get battery avg current. + * ab8500_fg_cc_data_end_handler() - end of data conversion isr. * @irq: interrupt number * @_di: pointer to the ab8500_fg structure * @@ -2002,7 +1999,7 @@ static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di) } /** - * ab8500_fg_cc_convend_handler() - isr to get battery avg current. + * ab8500_fg_cc_int_calib_handler () - end of calibration isr. * @irq: interrupt number * @_di: pointer to the ab8500_fg structure * @@ -2153,9 +2150,7 @@ static int ab8500_fg_get_property(struct power_supply *psy, val->intval = di->bat_cap.prev_mah; break; case POWER_SUPPLY_PROP_CAPACITY: - if (di->bm->capacity_scaling) - val->intval = di->bat_cap.cap_scale.scaled_cap; - else if (di->flags.batt_unknown && !di->bm->chg_unknown_bat && + if (di->flags.batt_unknown && !di->bm->chg_unknown_bat && di->flags.batt_id_received) val->intval = 100; else @@ -2344,6 +2339,50 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di) dev_err(di->dev, "BattOk init write failed.\n"); goto out; } + + if (((is_ab8505(di->parent) || is_ab9540(di->parent)) && + abx500_get_chip_id(di->dev) >= AB8500_CUT2P0) + || is_ab8540(di->parent)) { + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_MAX_TIME_REG, di->bm->fg_params->pcut_max_time); + + if (ret) { + dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_MAX_TIME_REG\n", __func__); + goto out; + }; + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_FLAG_TIME_REG, di->bm->fg_params->pcut_flag_time); + + if (ret) { + dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_FLAG_TIME_REG\n", __func__); + goto out; + }; + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_RESTART_REG, di->bm->fg_params->pcut_max_restart); + + if (ret) { + dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_RESTART_REG\n", __func__); + goto out; + }; + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_DEBOUNCE_REG, di->bm->fg_params->pcut_debounce_time); + + if (ret) { + dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_DEBOUNCE_REG\n", __func__); + goto out; + }; + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_CTL_STATUS_REG, di->bm->fg_params->pcut_enable); + + if (ret) { + dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_CTL_STATUS_REG\n", __func__); + goto out; + }; + } out: return ret; } @@ -2546,6 +2585,428 @@ static int ab8500_fg_sysfs_init(struct ab8500_fg *di) return ret; } + +static ssize_t ab8505_powercut_flagtime_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_FLAG_TIME_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_FLAG_TIME_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F)); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_flagtime_write(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + long unsigned reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + reg_value = simple_strtoul(buf, NULL, 10); + + if (reg_value > 0x7F) { + dev_err(dev, "Incorrect parameter, echo 0 (1.98s) - 127 (15.625ms) for flagtime\n"); + goto fail; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_FLAG_TIME_REG, (u8)reg_value); + + if (ret < 0) + dev_err(dev, "Failed to set AB8505_RTC_PCUT_FLAG_TIME_REG\n"); + +fail: + return count; +} + +static ssize_t ab8505_powercut_maxtime_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_MAX_TIME_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_MAX_TIME_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F)); + +fail: + return ret; + +} + +static ssize_t ab8505_powercut_maxtime_write(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + int reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + reg_value = simple_strtoul(buf, NULL, 10); + if (reg_value > 0x7F) { + dev_err(dev, "Incorrect parameter, echo 0 (0.0s) - 127 (1.98s) for maxtime\n"); + goto fail; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_MAX_TIME_REG, (u8)reg_value); + + if (ret < 0) + dev_err(dev, "Failed to set AB8505_RTC_PCUT_MAX_TIME_REG\n"); + +fail: + return count; +} + +static ssize_t ab8505_powercut_restart_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_RESTART_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF)); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_restart_write(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + int reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + reg_value = simple_strtoul(buf, NULL, 10); + if (reg_value > 0xF) { + dev_err(dev, "Incorrect parameter, echo 0 - 15 for number of restart\n"); + goto fail; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_RESTART_REG, (u8)reg_value); + + if (ret < 0) + dev_err(dev, "Failed to set AB8505_RTC_PCUT_RESTART_REG\n"); + +fail: + return count; + +} + +static ssize_t ab8505_powercut_timer_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_TIME_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_TIME_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F)); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_restart_counter_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_RESTART_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF0) >> 4); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_CTL_STATUS_REG, ®_value); + + if (ret < 0) + goto fail; + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x1)); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_write(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + int reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + reg_value = simple_strtoul(buf, NULL, 10); + if (reg_value > 0x1) { + dev_err(dev, "Incorrect parameter, echo 0/1 to disable/enable Pcut feature\n"); + goto fail; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_CTL_STATUS_REG, (u8)reg_value); + + if (ret < 0) + dev_err(dev, "Failed to set AB8505_RTC_PCUT_CTL_STATUS_REG\n"); + +fail: + return count; +} + +static ssize_t ab8505_powercut_flag_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_CTL_STATUS_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x10) >> 4)); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_debounce_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_DEBOUNCE_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_DEBOUNCE_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7)); + +fail: + return ret; +} + +static ssize_t ab8505_powercut_debounce_write(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + int reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + reg_value = simple_strtoul(buf, NULL, 10); + if (reg_value > 0x7) { + dev_err(dev, "Incorrect parameter, echo 0 to 7 for debounce setting\n"); + goto fail; + } + + ret = abx500_set_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_DEBOUNCE_REG, (u8)reg_value); + + if (ret < 0) + dev_err(dev, "Failed to set AB8505_RTC_PCUT_DEBOUNCE_REG\n"); + +fail: + return count; +} + +static ssize_t ab8505_powercut_enable_status_read(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int ret; + u8 reg_value; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + ret = abx500_get_register_interruptible(di->dev, AB8500_RTC, + AB8505_RTC_PCUT_CTL_STATUS_REG, ®_value); + + if (ret < 0) { + dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n"); + goto fail; + } + + return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x20) >> 5)); + +fail: + return ret; +} + +static struct device_attribute ab8505_fg_sysfs_psy_attrs[] = { + __ATTR(powercut_flagtime, (S_IRUGO | S_IWUSR | S_IWGRP), + ab8505_powercut_flagtime_read, ab8505_powercut_flagtime_write), + __ATTR(powercut_maxtime, (S_IRUGO | S_IWUSR | S_IWGRP), + ab8505_powercut_maxtime_read, ab8505_powercut_maxtime_write), + __ATTR(powercut_restart_max, (S_IRUGO | S_IWUSR | S_IWGRP), + ab8505_powercut_restart_read, ab8505_powercut_restart_write), + __ATTR(powercut_timer, S_IRUGO, ab8505_powercut_timer_read, NULL), + __ATTR(powercut_restart_counter, S_IRUGO, + ab8505_powercut_restart_counter_read, NULL), + __ATTR(powercut_enable, (S_IRUGO | S_IWUSR | S_IWGRP), + ab8505_powercut_read, ab8505_powercut_write), + __ATTR(powercut_flag, S_IRUGO, ab8505_powercut_flag_read, NULL), + __ATTR(powercut_debounce_time, (S_IRUGO | S_IWUSR | S_IWGRP), + ab8505_powercut_debounce_read, ab8505_powercut_debounce_write), + __ATTR(powercut_enable_status, S_IRUGO, + ab8505_powercut_enable_status_read, NULL), +}; + +static int ab8500_fg_sysfs_psy_create_attrs(struct device *dev) +{ + unsigned int i, j; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + if (((is_ab8505(di->parent) || is_ab9540(di->parent)) && + abx500_get_chip_id(dev->parent) >= AB8500_CUT2P0) + || is_ab8540(di->parent)) { + for (j = 0; j < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); j++) + if (device_create_file(dev, &ab8505_fg_sysfs_psy_attrs[j])) + goto sysfs_psy_create_attrs_failed_ab8505; + } + return 0; +sysfs_psy_create_attrs_failed_ab8505: + dev_err(dev, "Failed creating sysfs psy attrs for ab8505.\n"); + while (j--) + device_remove_file(dev, &ab8505_fg_sysfs_psy_attrs[i]); + + return -EIO; +} + +static void ab8500_fg_sysfs_psy_remove_attrs(struct device *dev) +{ + unsigned int i; + struct power_supply *psy = dev_get_drvdata(dev); + struct ab8500_fg *di; + + di = to_ab8500_fg_device_info(psy); + + if (((is_ab8505(di->parent) || is_ab9540(di->parent)) && + abx500_get_chip_id(dev->parent) >= AB8500_CUT2P0) + || is_ab8540(di->parent)) { + for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++) + (void)device_remove_file(dev, &ab8505_fg_sysfs_psy_attrs[i]); + } +} + /* Exposure to the sysfs interface <<END>> */ #if defined(CONFIG_PM) @@ -2607,6 +3068,7 @@ static int ab8500_fg_remove(struct platform_device *pdev) ab8500_fg_sysfs_exit(di); flush_scheduled_work(); + ab8500_fg_sysfs_psy_remove_attrs(di->fg_psy.dev); power_supply_unregister(&di->fg_psy); platform_set_drvdata(pdev, NULL); return ret; @@ -2772,6 +3234,13 @@ static int ab8500_fg_probe(struct platform_device *pdev) goto free_irq; } + ret = ab8500_fg_sysfs_psy_create_attrs(di->fg_psy.dev); + if (ret) { + dev_err(di->dev, "failed to create FG psy\n"); + ab8500_fg_sysfs_exit(di); + goto free_irq; + } + /* Calibrate the fg first time */ di->flags.calibrate = true; di->calib_state = AB8500_FG_CALIB_INIT; diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c index f043c0851a7..9863e423602 100644 --- a/drivers/power/abx500_chargalg.c +++ b/drivers/power/abx500_chargalg.c @@ -1,5 +1,6 @@ /* * Copyright (C) ST-Ericsson SA 2012 + * Copyright (c) 2012 Sony Mobile Communications AB * * Charging algorithm driver for abx500 variants * @@ -8,11 +9,13 @@ * Johan Palsson <johan.palsson@stericsson.com> * Karl Komierowski <karl.komierowski@stericsson.com> * Arun R Murthy <arun.murthy@stericsson.com> + * Author: Imre Sunyi <imre.sunyi@sonymobile.com> */ #include <linux/init.h> #include <linux/module.h> #include <linux/device.h> +#include <linux/hrtimer.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/slab.h> @@ -24,8 +27,10 @@ #include <linux/of.h> #include <linux/mfd/core.h> #include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500.h> #include <linux/mfd/abx500/ux500_chargalg.h> #include <linux/mfd/abx500/ab8500-bm.h> +#include <linux/notifier.h> /* Watchdog kick interval */ #define CHG_WD_INTERVAL (6 * HZ) @@ -33,6 +38,18 @@ /* End-of-charge criteria counter */ #define EOC_COND_CNT 10 +/* One hour expressed in seconds */ +#define ONE_HOUR_IN_SECONDS 3600 + +/* Five minutes expressed in seconds */ +#define FIVE_MINUTES_IN_SECONDS 300 + +/* Plus margin for the low battery threshold */ +#define BAT_PLUS_MARGIN (100) + +#define CHARGALG_CURR_STEP_LOW 0 +#define CHARGALG_CURR_STEP_HIGH 100 + #define to_abx500_chargalg_device_info(x) container_of((x), \ struct abx500_chargalg, chargalg_psy); @@ -66,6 +83,11 @@ struct abx500_chargalg_suspension_status { bool usb_suspended; }; +struct abx500_chargalg_current_step_status { + bool curr_step_change; + int curr_step; +}; + struct abx500_chargalg_battery_data { int temp; int volt; @@ -82,6 +104,7 @@ enum abx500_chargalg_states { STATE_HW_TEMP_PROTECT_INIT, STATE_HW_TEMP_PROTECT, STATE_NORMAL_INIT, + STATE_USB_PP_PRE_CHARGE, STATE_NORMAL, STATE_WAIT_FOR_RECHARGE_INIT, STATE_WAIT_FOR_RECHARGE, @@ -113,6 +136,7 @@ static const char *states[] = { "HW_TEMP_PROTECT_INIT", "HW_TEMP_PROTECT", "NORMAL_INIT", + "USB_PP_PRE_CHARGE", "NORMAL", "WAIT_FOR_RECHARGE_INIT", "WAIT_FOR_RECHARGE", @@ -204,6 +228,8 @@ enum maxim_ret { * @batt_data: data of the battery * @susp_status: current charger suspension status * @bm: Platform specific battery management information + * @curr_status: Current step status for over-current protection + * @parent: pointer to the struct abx500 * @chargalg_psy: structure that holds the battery properties exposed by * the charging algorithm * @events: structure for information about events triggered @@ -227,6 +253,8 @@ struct abx500_chargalg { struct abx500_chargalg_charger_info chg_info; struct abx500_chargalg_battery_data batt_data; struct abx500_chargalg_suspension_status susp_status; + struct ab8500 *parent; + struct abx500_chargalg_current_step_status curr_status; struct abx500_bm_data *bm; struct power_supply chargalg_psy; struct ux500_charger *ac_chg; @@ -236,51 +264,69 @@ struct abx500_chargalg { struct delayed_work chargalg_periodic_work; struct delayed_work chargalg_wd_work; struct work_struct chargalg_work; - struct timer_list safety_timer; - struct timer_list maintenance_timer; + struct hrtimer safety_timer; + struct hrtimer maintenance_timer; struct kobject chargalg_kobject; }; +/*External charger prepare notifier*/ +BLOCKING_NOTIFIER_HEAD(charger_notifier_list); + /* Main battery properties */ static enum power_supply_property abx500_chargalg_props[] = { POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_HEALTH, }; +struct abx500_chargalg_sysfs_entry { + struct attribute attr; + ssize_t (*show)(struct abx500_chargalg *, char *); + ssize_t (*store)(struct abx500_chargalg *, const char *, size_t); +}; + /** * abx500_chargalg_safety_timer_expired() - Expiration of the safety timer - * @data: pointer to the abx500_chargalg structure + * @timer: pointer to the hrtimer structure * * This function gets called when the safety timer for the charger * expires */ -static void abx500_chargalg_safety_timer_expired(unsigned long data) +static enum hrtimer_restart +abx500_chargalg_safety_timer_expired(struct hrtimer *timer) { - struct abx500_chargalg *di = (struct abx500_chargalg *) data; + struct abx500_chargalg *di = container_of(timer, struct abx500_chargalg, + safety_timer); dev_err(di->dev, "Safety timer expired\n"); di->events.safety_timer_expired = true; /* Trigger execution of the algorithm instantly */ queue_work(di->chargalg_wq, &di->chargalg_work); + + return HRTIMER_NORESTART; } /** * abx500_chargalg_maintenance_timer_expired() - Expiration of * the maintenance timer - * @i: pointer to the abx500_chargalg structure + * @timer: pointer to the timer structure * * This function gets called when the maintenence timer * expires */ -static void abx500_chargalg_maintenance_timer_expired(unsigned long data) +static enum hrtimer_restart +abx500_chargalg_maintenance_timer_expired(struct hrtimer *timer) { - struct abx500_chargalg *di = (struct abx500_chargalg *) data; + struct abx500_chargalg *di = container_of(timer, struct abx500_chargalg, + maintenance_timer); + dev_dbg(di->dev, "Maintenance timer expired\n"); di->events.maintenance_timer_expired = true; /* Trigger execution of the algorithm instantly */ queue_work(di->chargalg_wq, &di->chargalg_work); + + return HRTIMER_NORESTART; } /** @@ -303,6 +349,30 @@ static void abx500_chargalg_state_to(struct abx500_chargalg *di, di->charge_state = state; } +static int abx500_chargalg_check_charger_enable(struct abx500_chargalg *di) +{ + switch (di->charge_state) { + case STATE_NORMAL: + case STATE_MAINTENANCE_A: + case STATE_MAINTENANCE_B: + break; + default: + return 0; + } + + if (di->chg_info.charger_type & USB_CHG) { + return di->usb_chg->ops.check_enable(di->usb_chg, + di->bm->bat_type[di->bm->batt_id].normal_vol_lvl, + di->bm->bat_type[di->bm->batt_id].normal_cur_lvl); + } else if ((di->chg_info.charger_type & AC_CHG) && + !(di->ac_chg->external)) { + return di->ac_chg->ops.check_enable(di->ac_chg, + di->bm->bat_type[di->bm->batt_id].normal_vol_lvl, + di->bm->bat_type[di->bm->batt_id].normal_cur_lvl); + } + return 0; +} + /** * abx500_chargalg_check_charger_connection() - Check charger connection change * @di: pointer to the abx500_chargalg structure @@ -348,6 +418,22 @@ static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di) } /** + * abx500_chargalg_check_current_step_status() - Check charging current + * step status. + * @di: pointer to the abx500_chargalg structure + * + * This function will check if there is a change in the charging current step + * and change charge state accordingly. + */ +static void abx500_chargalg_check_current_step_status + (struct abx500_chargalg *di) +{ + if (di->curr_status.curr_step_change) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + di->curr_status.curr_step_change = false; +} + +/** * abx500_chargalg_start_safety_timer() - Start charging safety timer * @di: pointer to the abx500_chargalg structure * @@ -356,19 +442,16 @@ static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di) */ static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di) { - unsigned long timer_expiration = 0; + /* Charger-dependent expiration time in hours*/ + int timer_expiration = 0; switch (di->chg_info.charger_type) { case AC_CHG: - timer_expiration = - round_jiffies(jiffies + - (di->bm->main_safety_tmr_h * 3600 * HZ)); + timer_expiration = di->bm->main_safety_tmr_h; break; case USB_CHG: - timer_expiration = - round_jiffies(jiffies + - (di->bm->usb_safety_tmr_h * 3600 * HZ)); + timer_expiration = di->bm->usb_safety_tmr_h; break; default: @@ -377,11 +460,10 @@ static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di) } di->events.safety_timer_expired = false; - di->safety_timer.expires = timer_expiration; - if (!timer_pending(&di->safety_timer)) - add_timer(&di->safety_timer); - else - mod_timer(&di->safety_timer, timer_expiration); + hrtimer_set_expires_range(&di->safety_timer, + ktime_set(timer_expiration * ONE_HOUR_IN_SECONDS, 0), + ktime_set(FIVE_MINUTES_IN_SECONDS, 0)); + hrtimer_start_expires(&di->safety_timer, HRTIMER_MODE_REL); } /** @@ -392,8 +474,8 @@ static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di) */ static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di) { - di->events.safety_timer_expired = false; - del_timer(&di->safety_timer); + if (hrtimer_try_to_cancel(&di->safety_timer) >= 0) + di->events.safety_timer_expired = false; } /** @@ -408,17 +490,11 @@ static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di) static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di, int duration) { - unsigned long timer_expiration; - - /* Convert from hours to jiffies */ - timer_expiration = round_jiffies(jiffies + (duration * 3600 * HZ)); - + hrtimer_set_expires_range(&di->maintenance_timer, + ktime_set(duration * ONE_HOUR_IN_SECONDS, 0), + ktime_set(FIVE_MINUTES_IN_SECONDS, 0)); di->events.maintenance_timer_expired = false; - di->maintenance_timer.expires = timer_expiration; - if (!timer_pending(&di->maintenance_timer)) - add_timer(&di->maintenance_timer); - else - mod_timer(&di->maintenance_timer, timer_expiration); + hrtimer_start_expires(&di->maintenance_timer, HRTIMER_MODE_REL); } /** @@ -430,8 +506,8 @@ static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di, */ static void abx500_chargalg_stop_maintenance_timer(struct abx500_chargalg *di) { - di->events.maintenance_timer_expired = false; - del_timer(&di->maintenance_timer); + if (hrtimer_try_to_cancel(&di->maintenance_timer) >= 0) + di->events.maintenance_timer_expired = false; } /** @@ -477,6 +553,8 @@ static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di) static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable, int vset, int iset) { + static int abx500_chargalg_ex_ac_enable_toggle; + if (!di->ac_chg || !di->ac_chg->ops.enable) return -ENXIO; @@ -489,6 +567,14 @@ static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable, di->chg_info.ac_iset = iset; di->chg_info.ac_vset = vset; + /* Enable external charger */ + if (enable && di->ac_chg->external && + !abx500_chargalg_ex_ac_enable_toggle) { + blocking_notifier_call_chain(&charger_notifier_list, + 0, di->dev); + abx500_chargalg_ex_ac_enable_toggle++; + } + return di->ac_chg->ops.enable(di->ac_chg, enable, vset, iset); } @@ -520,6 +606,37 @@ static int abx500_chargalg_usb_en(struct abx500_chargalg *di, int enable, return di->usb_chg->ops.enable(di->usb_chg, enable, vset, iset); } + /** + * ab8540_chargalg_usb_pp_en() - Enable/ disable USB power path + * @di: pointer to the abx500_chargalg structure + * @enable: power path enable/disable + * + * The USB power path will be enable/ disable + */ +static int ab8540_chargalg_usb_pp_en(struct abx500_chargalg *di, bool enable) +{ + if (!di->usb_chg || !di->usb_chg->ops.pp_enable) + return -ENXIO; + + return di->usb_chg->ops.pp_enable(di->usb_chg, enable); +} + +/** + * ab8540_chargalg_usb_pre_chg_en() - Enable/ disable USB pre-charge + * @di: pointer to the abx500_chargalg structure + * @enable: USB pre-charge enable/disable + * + * The USB USB pre-charge will be enable/ disable + */ +static int ab8540_chargalg_usb_pre_chg_en(struct abx500_chargalg *di, + bool enable) +{ + if (!di->usb_chg || !di->usb_chg->ops.pre_chg_enable) + return -ENXIO; + + return di->usb_chg->ops.pre_chg_enable(di->usb_chg, enable); +} + /** * abx500_chargalg_update_chg_curr() - Update charger current * @di: pointer to the abx500_chargalg structure @@ -613,8 +730,6 @@ static void abx500_chargalg_hold_charging(struct abx500_chargalg *di) static void abx500_chargalg_start_charging(struct abx500_chargalg *di, int vset, int iset) { - bool start_chargalg_wd = true; - switch (di->chg_info.charger_type) { case AC_CHG: dev_dbg(di->dev, @@ -632,12 +747,8 @@ static void abx500_chargalg_start_charging(struct abx500_chargalg *di, default: dev_err(di->dev, "Unknown charger to charge from\n"); - start_chargalg_wd = false; break; } - - if (start_chargalg_wd && !delayed_work_pending(&di->chargalg_wd_work)) - queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0); } /** @@ -725,6 +836,9 @@ static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di) di->batt_data.avg_curr > 0) { if (++di->eoc_cnt >= EOC_COND_CNT) { di->eoc_cnt = 0; + if ((di->chg_info.charger_type & USB_CHG) && + (di->usb_chg->power_path)) + ab8540_chargalg_usb_pp_en(di, true); di->charge_status = POWER_SUPPLY_STATUS_FULL; di->maintenance_chg = true; dev_dbg(di->dev, "EOC reached!\n"); @@ -1217,6 +1331,8 @@ static void abx500_chargalg_external_power_changed(struct power_supply *psy) static void abx500_chargalg_algorithm(struct abx500_chargalg *di) { int charger_status; + int ret; + int curr_step_lvl; /* Collect data from all power_supply class devices */ class_for_each_device(power_supply_class, NULL, @@ -1227,6 +1343,15 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) abx500_chargalg_check_charger_voltage(di); charger_status = abx500_chargalg_check_charger_connection(di); + abx500_chargalg_check_current_step_status(di); + + if (is_ab8500(di->parent)) { + ret = abx500_chargalg_check_charger_enable(di); + if (ret < 0) + dev_err(di->dev, "Checking charger is enabled error" + ": Returned Value %d\n", ret); + } + /* * First check if we have a charger connected. * Also we don't allow charging of unknown batteries if configured @@ -1416,9 +1541,34 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) break; case STATE_NORMAL_INIT: - abx500_chargalg_start_charging(di, - di->bm->bat_type[di->bm->batt_id].normal_vol_lvl, - di->bm->bat_type[di->bm->batt_id].normal_cur_lvl); + if ((di->chg_info.charger_type & USB_CHG) && + di->usb_chg->power_path) { + if (di->batt_data.volt > + (di->bm->fg_params->lowbat_threshold + + BAT_PLUS_MARGIN)) { + ab8540_chargalg_usb_pre_chg_en(di, false); + ab8540_chargalg_usb_pp_en(di, false); + } else { + ab8540_chargalg_usb_pp_en(di, true); + ab8540_chargalg_usb_pre_chg_en(di, true); + abx500_chargalg_state_to(di, + STATE_USB_PP_PRE_CHARGE); + break; + } + } + + if (di->curr_status.curr_step == CHARGALG_CURR_STEP_LOW) + abx500_chargalg_stop_charging(di); + else { + curr_step_lvl = di->bm->bat_type[ + di->bm->batt_id].normal_cur_lvl + * di->curr_status.curr_step + / CHARGALG_CURR_STEP_HIGH; + abx500_chargalg_start_charging(di, + di->bm->bat_type[di->bm->batt_id] + .normal_vol_lvl, curr_step_lvl); + } + abx500_chargalg_state_to(di, STATE_NORMAL); abx500_chargalg_start_safety_timer(di); abx500_chargalg_stop_maintenance_timer(di); @@ -1430,6 +1580,13 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di) break; + case STATE_USB_PP_PRE_CHARGE: + if (di->batt_data.volt > + (di->bm->fg_params->lowbat_threshold + + BAT_PLUS_MARGIN)) + abx500_chargalg_state_to(di, STATE_NORMAL_INIT); + break; + case STATE_NORMAL: handle_maxim_chg_curr(di); if (di->charge_status == POWER_SUPPLY_STATUS_FULL && @@ -1653,99 +1810,134 @@ static int abx500_chargalg_get_property(struct power_supply *psy, /* Exposure to the sysfs interface */ -/** - * abx500_chargalg_sysfs_show() - sysfs show operations - * @kobj: pointer to the struct kobject - * @attr: pointer to the struct attribute - * @buf: buffer that holds the parameter to send to userspace - * - * Returns a buffer to be displayed in user space - */ -static ssize_t abx500_chargalg_sysfs_show(struct kobject *kobj, - struct attribute *attr, char *buf) +static ssize_t abx500_chargalg_curr_step_show(struct abx500_chargalg *di, + char *buf) { - struct abx500_chargalg *di = container_of(kobj, - struct abx500_chargalg, chargalg_kobject); + return sprintf(buf, "%d\n", di->curr_status.curr_step); +} + +static ssize_t abx500_chargalg_curr_step_store(struct abx500_chargalg *di, + const char *buf, size_t length) +{ + long int param; + int ret; + + ret = kstrtol(buf, 10, ¶m); + if (ret < 0) + return ret; + + di->curr_status.curr_step = param; + if (di->curr_status.curr_step >= CHARGALG_CURR_STEP_LOW && + di->curr_status.curr_step <= CHARGALG_CURR_STEP_HIGH) { + di->curr_status.curr_step_change = true; + queue_work(di->chargalg_wq, &di->chargalg_work); + } else + dev_info(di->dev, "Wrong current step\n" + "Enter 0. Disable AC/USB Charging\n" + "1--100. Set AC/USB charging current step\n" + "100. Enable AC/USB Charging\n"); + + return strlen(buf); +} + +static ssize_t abx500_chargalg_en_show(struct abx500_chargalg *di, + char *buf) +{ return sprintf(buf, "%d\n", di->susp_status.ac_suspended && di->susp_status.usb_suspended); } -/** - * abx500_chargalg_sysfs_charger() - sysfs store operations - * @kobj: pointer to the struct kobject - * @attr: pointer to the struct attribute - * @buf: buffer that holds the parameter passed from userspace - * @length: length of the parameter passed - * - * Returns length of the buffer(input taken from user space) on success - * else error code on failure - * The operation to be performed on passing the parameters from the user space. - */ -static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj, - struct attribute *attr, const char *buf, size_t length) +static ssize_t abx500_chargalg_en_store(struct abx500_chargalg *di, + const char *buf, size_t length) { - struct abx500_chargalg *di = container_of(kobj, - struct abx500_chargalg, chargalg_kobject); long int param; int ac_usb; int ret; - char entry = *attr->name; - switch (entry) { - case 'c': - ret = strict_strtol(buf, 10, ¶m); - if (ret < 0) - return ret; - - ac_usb = param; - switch (ac_usb) { - case 0: - /* Disable charging */ - di->susp_status.ac_suspended = true; - di->susp_status.usb_suspended = true; - di->susp_status.suspended_change = true; - /* Trigger a state change */ - queue_work(di->chargalg_wq, - &di->chargalg_work); - break; - case 1: - /* Enable AC Charging */ - di->susp_status.ac_suspended = false; - di->susp_status.suspended_change = true; - /* Trigger a state change */ - queue_work(di->chargalg_wq, - &di->chargalg_work); - break; - case 2: - /* Enable USB charging */ - di->susp_status.usb_suspended = false; - di->susp_status.suspended_change = true; - /* Trigger a state change */ - queue_work(di->chargalg_wq, - &di->chargalg_work); - break; - default: - dev_info(di->dev, "Wrong input\n" - "Enter 0. Disable AC/USB Charging\n" - "1. Enable AC charging\n" - "2. Enable USB Charging\n"); - }; + ret = kstrtol(buf, 10, ¶m); + if (ret < 0) + return ret; + + ac_usb = param; + switch (ac_usb) { + case 0: + /* Disable charging */ + di->susp_status.ac_suspended = true; + di->susp_status.usb_suspended = true; + di->susp_status.suspended_change = true; + /* Trigger a state change */ + queue_work(di->chargalg_wq, + &di->chargalg_work); + break; + case 1: + /* Enable AC Charging */ + di->susp_status.ac_suspended = false; + di->susp_status.suspended_change = true; + /* Trigger a state change */ + queue_work(di->chargalg_wq, + &di->chargalg_work); + break; + case 2: + /* Enable USB charging */ + di->susp_status.usb_suspended = false; + di->susp_status.suspended_change = true; + /* Trigger a state change */ + queue_work(di->chargalg_wq, + &di->chargalg_work); break; + default: + dev_info(di->dev, "Wrong input\n" + "Enter 0. Disable AC/USB Charging\n" + "1. Enable AC charging\n" + "2. Enable USB Charging\n"); }; return strlen(buf); } -static struct attribute abx500_chargalg_en_charger = \ +static struct abx500_chargalg_sysfs_entry abx500_chargalg_en_charger = + __ATTR(chargalg, 0644, abx500_chargalg_en_show, + abx500_chargalg_en_store); + +static struct abx500_chargalg_sysfs_entry abx500_chargalg_curr_step = + __ATTR(chargalg_curr_step, 0644, abx500_chargalg_curr_step_show, + abx500_chargalg_curr_step_store); + +static ssize_t abx500_chargalg_sysfs_show(struct kobject *kobj, + struct attribute *attr, char *buf) { - .name = "chargalg", - .mode = S_IRUGO | S_IWUSR, -}; + struct abx500_chargalg_sysfs_entry *entry = container_of(attr, + struct abx500_chargalg_sysfs_entry, attr); + + struct abx500_chargalg *di = container_of(kobj, + struct abx500_chargalg, chargalg_kobject); + + if (!entry->show) + return -EIO; + + return entry->show(di, buf); +} + +static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj, + struct attribute *attr, const char *buf, size_t length) +{ + struct abx500_chargalg_sysfs_entry *entry = container_of(attr, + struct abx500_chargalg_sysfs_entry, attr); + + struct abx500_chargalg *di = container_of(kobj, + struct abx500_chargalg, chargalg_kobject); + + if (!entry->store) + return -EIO; + + return entry->store(di, buf, length); +} static struct attribute *abx500_chargalg_chg[] = { - &abx500_chargalg_en_charger, - NULL + &abx500_chargalg_en_charger.attr, + &abx500_chargalg_curr_step.attr, + NULL, }; static const struct sysfs_ops abx500_chargalg_sysfs_ops = { @@ -1832,10 +2024,16 @@ static int abx500_chargalg_remove(struct platform_device *pdev) /* sysfs interface to enable/disbale charging from user space */ abx500_chargalg_sysfs_exit(di); + hrtimer_cancel(&di->safety_timer); + hrtimer_cancel(&di->maintenance_timer); + + cancel_delayed_work_sync(&di->chargalg_periodic_work); + cancel_delayed_work_sync(&di->chargalg_wd_work); + cancel_work_sync(&di->chargalg_work); + /* Delete the work queue */ destroy_workqueue(di->chargalg_wq); - flush_scheduled_work(); power_supply_unregister(&di->chargalg_psy); platform_set_drvdata(pdev, NULL); @@ -1873,8 +2071,9 @@ static int abx500_chargalg_probe(struct platform_device *pdev) } } - /* get device struct */ + /* get device struct and parent */ di->dev = &pdev->dev; + di->parent = dev_get_drvdata(pdev->dev.parent); /* chargalg supply */ di->chargalg_psy.name = "abx500_chargalg"; @@ -1888,15 +2087,13 @@ static int abx500_chargalg_probe(struct platform_device *pdev) abx500_chargalg_external_power_changed; /* Initilialize safety timer */ - init_timer(&di->safety_timer); + hrtimer_init(&di->safety_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); di->safety_timer.function = abx500_chargalg_safety_timer_expired; - di->safety_timer.data = (unsigned long) di; /* Initilialize maintenance timer */ - init_timer(&di->maintenance_timer); + hrtimer_init(&di->maintenance_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); di->maintenance_timer.function = abx500_chargalg_maintenance_timer_expired; - di->maintenance_timer.data = (unsigned long) di; /* Create a work queue for the chargalg */ di->chargalg_wq = @@ -1933,6 +2130,7 @@ static int abx500_chargalg_probe(struct platform_device *pdev) dev_err(di->dev, "failed to create sysfs entry\n"); goto free_psy; } + di->curr_status.curr_step = CHARGALG_CURR_STEP_HIGH; /* Run the charging algorithm */ queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0); @@ -1964,18 +2162,7 @@ static struct platform_driver abx500_chargalg_driver = { }, }; -static int __init abx500_chargalg_init(void) -{ - return platform_driver_register(&abx500_chargalg_driver); -} - -static void __exit abx500_chargalg_exit(void) -{ - platform_driver_unregister(&abx500_chargalg_driver); -} - -module_init(abx500_chargalg_init); -module_exit(abx500_chargalg_exit); +module_platform_driver(abx500_chargalg_driver); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Johan Palsson, Karl Komierowski"); diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c index 8acc3f8d303..fefc39fe42b 100644 --- a/drivers/power/charger-manager.c +++ b/drivers/power/charger-manager.c @@ -1485,13 +1485,12 @@ static int charger_manager_probe(struct platform_device *pdev) /* Basic Values. Unspecified are Null or 0 */ cm->dev = &pdev->dev; - cm->desc = kzalloc(sizeof(struct charger_desc), GFP_KERNEL); + cm->desc = kmemdup(desc, sizeof(struct charger_desc), GFP_KERNEL); if (!cm->desc) { dev_err(&pdev->dev, "Cannot allocate memory.\n"); ret = -ENOMEM; goto err_alloc_desc; } - memcpy(cm->desc, desc, sizeof(struct charger_desc)); cm->last_temp_mC = INT_MIN; /* denotes "unmeasured, yet" */ /* diff --git a/drivers/power/da9030_battery.c b/drivers/power/da9030_battery.c index e8c5a391a49..ae6c41835ee 100644 --- a/drivers/power/da9030_battery.c +++ b/drivers/power/da9030_battery.c @@ -505,7 +505,7 @@ static int da9030_battery_probe(struct platform_device *pdev) pdata->charge_millivolt > 4350) return -EINVAL; - charger = kzalloc(sizeof(*charger), GFP_KERNEL); + charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL); if (charger == NULL) return -ENOMEM; @@ -557,8 +557,6 @@ err_notifier: cancel_delayed_work(&charger->work); err_charger_init: - kfree(charger); - return ret; } @@ -575,8 +573,6 @@ static int da9030_battery_remove(struct platform_device *dev) da9030_set_charge(charger, 0); power_supply_unregister(&charger->psy); - kfree(charger); - return 0; } diff --git a/drivers/power/da9052-battery.c b/drivers/power/da9052-battery.c index 08193feb3b0..f8f4c0f7c17 100644 --- a/drivers/power/da9052-battery.c +++ b/drivers/power/da9052-battery.c @@ -594,7 +594,8 @@ static s32 da9052_bat_probe(struct platform_device *pdev) int ret; int i; - bat = kzalloc(sizeof(struct da9052_battery), GFP_KERNEL); + bat = devm_kzalloc(&pdev->dev, sizeof(struct da9052_battery), + GFP_KERNEL); if (!bat) return -ENOMEM; @@ -635,7 +636,6 @@ err: while (--i >= 0) da9052_free_irq(bat->da9052, da9052_bat_irq_bits[i], bat); - kfree(bat); return ret; } static int da9052_bat_remove(struct platform_device *pdev) @@ -647,7 +647,6 @@ static int da9052_bat_remove(struct platform_device *pdev) da9052_free_irq(bat->da9052, da9052_bat_irq_bits[i], bat); power_supply_unregister(&bat->psy); - kfree(bat); return 0; } diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index 704e652072b..85b4e6eca0b 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -512,7 +512,7 @@ static int ds2760_battery_probe(struct platform_device *pdev) int retval = 0; struct ds2760_device_info *di; - di = kzalloc(sizeof(*di), GFP_KERNEL); + di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); if (!di) { retval = -ENOMEM; goto di_alloc_failed; @@ -576,7 +576,6 @@ static int ds2760_battery_probe(struct platform_device *pdev) workqueue_failed: power_supply_unregister(&di->bat); batt_failed: - kfree(di); di_alloc_failed: success: return retval; @@ -590,7 +589,6 @@ static int ds2760_battery_remove(struct platform_device *pdev) cancel_delayed_work_sync(&di->set_charged_work); destroy_workqueue(di->monitor_wqueue); power_supply_unregister(&di->bat); - kfree(di); return 0; } diff --git a/drivers/power/ds2780_battery.c b/drivers/power/ds2780_battery.c index 8b6c4539e7f..9f418fa879e 100644 --- a/drivers/power/ds2780_battery.c +++ b/drivers/power/ds2780_battery.c @@ -760,7 +760,7 @@ static int ds2780_battery_probe(struct platform_device *pdev) int ret = 0; struct ds2780_device_info *dev_info; - dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL); + dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL); if (!dev_info) { ret = -ENOMEM; goto fail; @@ -779,7 +779,7 @@ static int ds2780_battery_probe(struct platform_device *pdev) ret = power_supply_register(&pdev->dev, &dev_info->bat); if (ret) { dev_err(dev_info->dev, "failed to register battery\n"); - goto fail_free_info; + goto fail; } ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2780_attr_group); @@ -813,8 +813,6 @@ fail_remove_group: sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group); fail_unregister: power_supply_unregister(&dev_info->bat); -fail_free_info: - kfree(dev_info); fail: return ret; } @@ -828,7 +826,6 @@ static int ds2780_battery_remove(struct platform_device *pdev) power_supply_unregister(&dev_info->bat); - kfree(dev_info); return 0; } diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c index c09e7726c96..563174891c9 100644 --- a/drivers/power/ds2782_battery.c +++ b/drivers/power/ds2782_battery.c @@ -332,32 +332,32 @@ static int ds278x_battery_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP -static int ds278x_suspend(struct i2c_client *client, - pm_message_t state) +static int ds278x_suspend(struct device *dev) { + struct i2c_client *client = to_i2c_client(dev); struct ds278x_info *info = i2c_get_clientdata(client); cancel_delayed_work(&info->bat_work); return 0; } -static int ds278x_resume(struct i2c_client *client) +static int ds278x_resume(struct device *dev) { + struct i2c_client *client = to_i2c_client(dev); struct ds278x_info *info = i2c_get_clientdata(client); schedule_delayed_work(&info->bat_work, DS278x_DELAY); return 0; } -#else - -#define ds278x_suspend NULL -#define ds278x_resume NULL - -#endif /* CONFIG_PM */ +static SIMPLE_DEV_PM_OPS(ds278x_battery_pm_ops, ds278x_suspend, ds278x_resume); +#define DS278X_BATTERY_PM_OPS (&ds278x_battery_pm_ops) +#else +#define DS278X_BATTERY_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ enum ds278x_num_id { DS2782 = 0, @@ -460,11 +460,10 @@ MODULE_DEVICE_TABLE(i2c, ds278x_id); static struct i2c_driver ds278x_battery_driver = { .driver = { .name = "ds2782-battery", + .pm = DS278X_BATTERY_PM_OPS, }, .probe = ds278x_battery_probe, .remove = ds278x_battery_remove, - .suspend = ds278x_suspend, - .resume = ds278x_resume, .id_table = ds278x_id, }; module_i2c_driver(ds278x_battery_driver); diff --git a/drivers/power/goldfish_battery.c b/drivers/power/goldfish_battery.c index c10f460f986..29eba88a296 100644 --- a/drivers/power/goldfish_battery.c +++ b/drivers/power/goldfish_battery.c @@ -178,7 +178,7 @@ static int goldfish_battery_probe(struct platform_device *pdev) return -ENODEV; } - data->reg_base = devm_ioremap(&pdev->dev, r->start, r->end - r->start + 1); + data->reg_base = devm_ioremap(&pdev->dev, r->start, resource_size(r)); if (data->reg_base == NULL) { dev_err(&pdev->dev, "unable to remap MMIO\n"); return -ENOMEM; diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c index e3e40a9f3af..e9883eeeee7 100644 --- a/drivers/power/gpio-charger.c +++ b/drivers/power/gpio-charger.c @@ -86,7 +86,8 @@ static int gpio_charger_probe(struct platform_device *pdev) return -EINVAL; } - gpio_charger = kzalloc(sizeof(*gpio_charger), GFP_KERNEL); + gpio_charger = devm_kzalloc(&pdev->dev, sizeof(*gpio_charger), + GFP_KERNEL); if (!gpio_charger) { dev_err(&pdev->dev, "Failed to alloc driver structure\n"); return -ENOMEM; @@ -140,7 +141,6 @@ static int gpio_charger_probe(struct platform_device *pdev) err_gpio_free: gpio_free(pdata->gpio); err_free: - kfree(gpio_charger); return ret; } @@ -156,7 +156,6 @@ static int gpio_charger_remove(struct platform_device *pdev) gpio_free(gpio_charger->pdata->gpio); platform_set_drvdata(pdev, NULL); - kfree(gpio_charger); return 0; } diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c index 176ad59d99f..fc04d191579 100644 --- a/drivers/power/isp1704_charger.c +++ b/drivers/power/isp1704_charger.c @@ -411,7 +411,7 @@ static int isp1704_charger_probe(struct platform_device *pdev) struct isp1704_charger *isp; int ret = -ENODEV; - isp = kzalloc(sizeof *isp, GFP_KERNEL); + isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL); if (!isp) return -ENOMEM; @@ -477,8 +477,6 @@ fail1: isp1704_charger_set_power(isp, 0); usb_put_phy(isp->phy); fail0: - kfree(isp); - dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret); return ret; @@ -492,7 +490,6 @@ static int isp1704_charger_remove(struct platform_device *pdev) power_supply_unregister(&isp->psy); usb_put_phy(isp->phy); isp1704_charger_set_power(isp, 0); - kfree(isp); return 0; } diff --git a/drivers/power/lp8788-charger.c b/drivers/power/lp8788-charger.c index 6d1f452810b..ed49b50b220 100644 --- a/drivers/power/lp8788-charger.c +++ b/drivers/power/lp8788-charger.c @@ -49,7 +49,6 @@ #define LP8788_CHG_START 0x11 #define LP8788_CHG_END 0x1C -#define LP8788_BUF_SIZE 40 #define LP8788_ISEL_MAX 23 #define LP8788_ISEL_STEP 50 #define LP8788_VTERM_MIN 4100 @@ -633,7 +632,7 @@ static ssize_t lp8788_show_charger_status(struct device *dev, lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data); state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S; - return scnprintf(buf, LP8788_BUF_SIZE, "%s\n", desc[state]); + return scnprintf(buf, PAGE_SIZE, "%s\n", desc[state]); } static ssize_t lp8788_show_eoc_time(struct device *dev, @@ -647,7 +646,7 @@ static ssize_t lp8788_show_eoc_time(struct device *dev, lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val); val = (val & LP8788_CHG_EOC_TIME_M) >> LP8788_CHG_EOC_TIME_S; - return scnprintf(buf, LP8788_BUF_SIZE, "End Of Charge Time: %s\n", + return scnprintf(buf, PAGE_SIZE, "End Of Charge Time: %s\n", stime[val]); } @@ -667,8 +666,7 @@ static ssize_t lp8788_show_eoc_level(struct device *dev, val = (val & LP8788_CHG_EOC_LEVEL_M) >> LP8788_CHG_EOC_LEVEL_S; level = mode ? abs_level[val] : relative_level[val]; - return scnprintf(buf, LP8788_BUF_SIZE, "End Of Charge Level: %s\n", - level); + return scnprintf(buf, PAGE_SIZE, "End Of Charge Level: %s\n", level); } static DEVICE_ATTR(charger_status, S_IRUSR, lp8788_show_charger_status, NULL); diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c index 74a0bd9bc16..c7ff6d67f15 100644 --- a/drivers/power/max17040_battery.c +++ b/drivers/power/max17040_battery.c @@ -246,31 +246,34 @@ static int max17040_remove(struct i2c_client *client) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP -static int max17040_suspend(struct i2c_client *client, - pm_message_t state) +static int max17040_suspend(struct device *dev) { + struct i2c_client *client = to_i2c_client(dev); struct max17040_chip *chip = i2c_get_clientdata(client); cancel_delayed_work(&chip->work); return 0; } -static int max17040_resume(struct i2c_client *client) +static int max17040_resume(struct device *dev) { + struct i2c_client *client = to_i2c_client(dev); struct max17040_chip *chip = i2c_get_clientdata(client); schedule_delayed_work(&chip->work, MAX17040_DELAY); return 0; } +static SIMPLE_DEV_PM_OPS(max17040_pm_ops, max17040_suspend, max17040_resume); +#define MAX17040_PM_OPS (&max17040_pm_ops) + #else -#define max17040_suspend NULL -#define max17040_resume NULL +#define MAX17040_PM_OPS NULL -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static const struct i2c_device_id max17040_id[] = { { "max17040", 0 }, @@ -281,11 +284,10 @@ MODULE_DEVICE_TABLE(i2c, max17040_id); static struct i2c_driver max17040_i2c_driver = { .driver = { .name = "max17040", + .pm = MAX17040_PM_OPS, }, .probe = max17040_probe, .remove = max17040_remove, - .suspend = max17040_suspend, - .resume = max17040_resume, .id_table = max17040_id, }; module_i2c_driver(max17040_i2c_driver); diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c index 14e2b96d93b..08f0d7909b6 100644 --- a/drivers/power/max8903_charger.c +++ b/drivers/power/max8903_charger.c @@ -189,7 +189,7 @@ static int max8903_probe(struct platform_device *pdev) int ta_in = 0; int usb_in = 0; - data = kzalloc(sizeof(struct max8903_data), GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL); if (data == NULL) { dev_err(dev, "Cannot allocate memory.\n"); return -ENOMEM; @@ -341,7 +341,6 @@ err_dc_irq: err_psy: power_supply_unregister(&data->psy); err: - kfree(data); return ret; } @@ -359,7 +358,6 @@ static int max8903_remove(struct platform_device *pdev) if (pdata->dc_valid) free_irq(gpio_to_irq(pdata->dok), data); power_supply_unregister(&data->psy); - kfree(data); } return 0; diff --git a/drivers/power/max8925_power.c b/drivers/power/max8925_power.c index 665cdc76c26..0ee1e14f76e 100644 --- a/drivers/power/max8925_power.c +++ b/drivers/power/max8925_power.c @@ -489,7 +489,8 @@ static int max8925_power_probe(struct platform_device *pdev) return -EINVAL; } - info = kzalloc(sizeof(struct max8925_power_info), GFP_KERNEL); + info = devm_kzalloc(&pdev->dev, sizeof(struct max8925_power_info), + GFP_KERNEL); if (!info) return -ENOMEM; info->chip = chip; @@ -546,7 +547,6 @@ out_battery: out_usb: power_supply_unregister(&info->ac); out: - kfree(info); return ret; } @@ -559,7 +559,6 @@ static int max8925_power_remove(struct platform_device *pdev) power_supply_unregister(&info->usb); power_supply_unregister(&info->battery); max8925_deinit_charger(info); - kfree(info); } return 0; } diff --git a/drivers/power/max8997_charger.c b/drivers/power/max8997_charger.c index e757885b620..4bdedfed936 100644 --- a/drivers/power/max8997_charger.c +++ b/drivers/power/max8997_charger.c @@ -138,7 +138,8 @@ static int max8997_battery_probe(struct platform_device *pdev) return ret; } - charger = kzalloc(sizeof(struct charger_data), GFP_KERNEL); + charger = devm_kzalloc(&pdev->dev, sizeof(struct charger_data), + GFP_KERNEL); if (charger == NULL) { dev_err(&pdev->dev, "Cannot allocate memory.\n"); return -ENOMEM; @@ -158,13 +159,10 @@ static int max8997_battery_probe(struct platform_device *pdev) ret = power_supply_register(&pdev->dev, &charger->battery); if (ret) { dev_err(&pdev->dev, "failed: power supply register\n"); - goto err; + return ret; } return 0; -err: - kfree(charger); - return ret; } static int max8997_battery_remove(struct platform_device *pdev) @@ -172,7 +170,6 @@ static int max8997_battery_remove(struct platform_device *pdev) struct charger_data *charger = platform_get_drvdata(pdev); power_supply_unregister(&charger->battery); - kfree(charger); return 0; } diff --git a/drivers/power/max8998_charger.c b/drivers/power/max8998_charger.c index bf677e3daec..5017470c2fc 100644 --- a/drivers/power/max8998_charger.c +++ b/drivers/power/max8998_charger.c @@ -88,7 +88,8 @@ static int max8998_battery_probe(struct platform_device *pdev) return -ENODEV; } - max8998 = kzalloc(sizeof(struct max8998_battery_data), GFP_KERNEL); + max8998 = devm_kzalloc(&pdev->dev, sizeof(struct max8998_battery_data), + GFP_KERNEL); if (!max8998) return -ENOMEM; @@ -174,7 +175,6 @@ static int max8998_battery_probe(struct platform_device *pdev) return 0; err: - kfree(max8998); return ret; } @@ -183,7 +183,6 @@ static int max8998_battery_remove(struct platform_device *pdev) struct max8998_battery_data *max8998 = platform_get_drvdata(pdev); power_supply_unregister(&max8998->battery); - kfree(max8998); return 0; } diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c index c2122a7ad06..17fd77f24b2 100644 --- a/drivers/power/pcf50633-charger.c +++ b/drivers/power/pcf50633-charger.c @@ -373,7 +373,7 @@ static int pcf50633_mbc_probe(struct platform_device *pdev) int i; u8 mbcs1; - mbc = kzalloc(sizeof(*mbc), GFP_KERNEL); + mbc = devm_kzalloc(&pdev->dev, sizeof(*mbc), GFP_KERNEL); if (!mbc) return -ENOMEM; @@ -413,7 +413,6 @@ static int pcf50633_mbc_probe(struct platform_device *pdev) ret = power_supply_register(&pdev->dev, &mbc->adapter); if (ret) { dev_err(mbc->pcf->dev, "failed to register adapter\n"); - kfree(mbc); return ret; } @@ -421,7 +420,6 @@ static int pcf50633_mbc_probe(struct platform_device *pdev) if (ret) { dev_err(mbc->pcf->dev, "failed to register usb\n"); power_supply_unregister(&mbc->adapter); - kfree(mbc); return ret; } @@ -430,7 +428,6 @@ static int pcf50633_mbc_probe(struct platform_device *pdev) dev_err(mbc->pcf->dev, "failed to register ac\n"); power_supply_unregister(&mbc->adapter); power_supply_unregister(&mbc->usb); - kfree(mbc); return ret; } @@ -461,8 +458,6 @@ static int pcf50633_mbc_remove(struct platform_device *pdev) power_supply_unregister(&mbc->adapter); power_supply_unregister(&mbc->ac); - kfree(mbc); - return 0; } diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c index ee346d44357..a44175139bb 100644 --- a/drivers/power/pm2301_charger.c +++ b/drivers/power/pm2301_charger.c @@ -16,24 +16,25 @@ #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/power_supply.h> -#include <linux/completion.h> #include <linux/regulator/consumer.h> #include <linux/err.h> #include <linux/i2c.h> #include <linux/workqueue.h> -#include <linux/kobject.h> -#include <linux/mfd/abx500.h> #include <linux/mfd/abx500/ab8500.h> #include <linux/mfd/abx500/ab8500-bm.h> -#include <linux/mfd/abx500/ab8500-gpadc.h> #include <linux/mfd/abx500/ux500_chargalg.h> #include <linux/pm2301_charger.h> #include <linux/gpio.h> +#include <linux/pm_runtime.h> +#include <linux/pm.h> #include "pm2301_charger.h" #define to_pm2xxx_charger_ac_device_info(x) container_of((x), \ struct pm2xxx_charger, ac_chg) +#define SLEEP_MIN 50 +#define SLEEP_MAX 100 +#define PM2XXX_AUTOSUSPEND_DELAY 500 static int pm2xxx_interrupt_registers[] = { PM2XXX_REG_INT1, @@ -113,33 +114,24 @@ static const struct i2c_device_id pm2xxx_ident[] = { static void set_lpn_pin(struct pm2xxx_charger *pm2) { - if (pm2->ac.charger_connected) - return; - gpio_set_value(pm2->lpn_pin, 1); - - return; + if (!pm2->ac.charger_connected && gpio_is_valid(pm2->lpn_pin)) { + gpio_set_value(pm2->lpn_pin, 1); + usleep_range(SLEEP_MIN, SLEEP_MAX); + } } static void clear_lpn_pin(struct pm2xxx_charger *pm2) { - if (pm2->ac.charger_connected) - return; - gpio_set_value(pm2->lpn_pin, 0); - - return; + if (!pm2->ac.charger_connected && gpio_is_valid(pm2->lpn_pin)) + gpio_set_value(pm2->lpn_pin, 0); } static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val) { int ret; - /* - * When AC adaptor is unplugged, the host - * must put LPN high to be able to - * communicate by I2C with PM2301 - * and receive I2C "acknowledge" from PM2301. - */ - mutex_lock(&pm2->lock); - set_lpn_pin(pm2); + + /* wake up the device */ + pm_runtime_get_sync(pm2->dev); ret = i2c_smbus_read_i2c_block_data(pm2->config.pm2xxx_i2c, reg, 1, val); @@ -147,8 +139,8 @@ static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val) dev_err(pm2->dev, "Error reading register at 0x%x\n", reg); else ret = 0; - clear_lpn_pin(pm2); - mutex_unlock(&pm2->lock); + + pm_runtime_put_sync(pm2->dev); return ret; } @@ -156,14 +148,9 @@ static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val) static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val) { int ret; - /* - * When AC adaptor is unplugged, the host - * must put LPN high to be able to - * communicate by I2C with PM2301 - * and receive I2C "acknowledge" from PM2301. - */ - mutex_lock(&pm2->lock); - set_lpn_pin(pm2); + + /* wake up the device */ + pm_runtime_get_sync(pm2->dev); ret = i2c_smbus_write_i2c_block_data(pm2->config.pm2xxx_i2c, reg, 1, &val); @@ -171,8 +158,8 @@ static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val) dev_err(pm2->dev, "Error writing register at 0x%x\n", reg); else ret = 0; - clear_lpn_pin(pm2); - mutex_unlock(&pm2->lock); + + pm_runtime_put_sync(pm2->dev); return ret; } @@ -192,11 +179,22 @@ static int pm2xxx_charging_disable_mngt(struct pm2xxx_charger *pm2) { int ret; + /* Disable SW EOC ctrl */ + ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG, PM2XXX_SWCTRL_HW); + if (ret < 0) { + dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__); + return ret; + } + /* Disable charging */ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2, (PM2XXX_CH_AUTO_RESUME_DIS | PM2XXX_CHARGER_DIS)); + if (ret < 0) { + dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__); + return ret; + } - return ret; + return 0; } static int pm2xxx_charger_batt_therm_mngt(struct pm2xxx_charger *pm2, int val) @@ -216,21 +214,14 @@ int pm2xxx_charger_die_therm_mngt(struct pm2xxx_charger *pm2, int val) static int pm2xxx_charger_ovv_mngt(struct pm2xxx_charger *pm2, int val) { - int ret = 0; + dev_err(pm2->dev, "Overvoltage detected\n"); + pm2->flags.ovv = true; + power_supply_changed(&pm2->ac_chg.psy); - pm2->failure_input_ovv++; - if (pm2->failure_input_ovv < 4) { - ret = pm2xxx_charging_enable_mngt(pm2); - goto out; - } else { - pm2->failure_input_ovv = 0; - dev_err(pm2->dev, "Overvoltage detected\n"); - pm2->flags.ovv = true; - power_supply_changed(&pm2->ac_chg.psy); - } + /* Schedule a new HW failure check */ + queue_delayed_work(pm2->charger_wq, &pm2->check_hw_failure_work, 0); -out: - return ret; + return 0; } static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val) @@ -245,13 +236,29 @@ static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val) static int pm2xxx_charger_vbat_lsig_mngt(struct pm2xxx_charger *pm2, int val) { + int ret; + switch (val) { case PM2XXX_INT1_ITVBATLOWR: dev_dbg(pm2->dev, "VBAT grows above VBAT_LOW level\n"); + /* Enable SW EOC ctrl */ + ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG, + PM2XXX_SWCTRL_SW); + if (ret < 0) { + dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__); + return ret; + } break; case PM2XXX_INT1_ITVBATLOWF: dev_dbg(pm2->dev, "VBAT drops below VBAT_LOW level\n"); + /* Disable SW EOC ctrl */ + ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG, + PM2XXX_SWCTRL_HW); + if (ret < 0) { + dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__); + return ret; + } break; default: @@ -322,16 +329,27 @@ static int pm2_int_reg0(void *pm2_data, int val) struct pm2xxx_charger *pm2 = pm2_data; int ret = 0; - if (val & (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)) { - ret = pm2xxx_charger_vbat_lsig_mngt(pm2, val & - (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)); + if (val & PM2XXX_INT1_ITVBATLOWR) { + ret = pm2xxx_charger_vbat_lsig_mngt(pm2, + PM2XXX_INT1_ITVBATLOWR); + if (ret < 0) + goto out; + } + + if (val & PM2XXX_INT1_ITVBATLOWF) { + ret = pm2xxx_charger_vbat_lsig_mngt(pm2, + PM2XXX_INT1_ITVBATLOWF); + if (ret < 0) + goto out; } if (val & PM2XXX_INT1_ITVBATDISCONNECT) { ret = pm2xxx_charger_bat_disc_mngt(pm2, PM2XXX_INT1_ITVBATDISCONNECT); + if (ret < 0) + goto out; } - +out: return ret; } @@ -447,7 +465,6 @@ static int pm2_int_reg5(void *pm2_data, int val) struct pm2xxx_charger *pm2 = pm2_data; int ret = 0; - if (val & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) { dev_dbg(pm2->dev, "VMPWR drop to VBAT level\n"); } @@ -468,14 +485,22 @@ static irqreturn_t pm2xxx_irq_int(int irq, void *data) struct pm2xxx_interrupts *interrupt = pm2->pm2_int; int i; - for (i = 0; i < PM2XXX_NUM_INT_REG; i++) { - pm2xxx_reg_read(pm2, + /* wake up the device */ + pm_runtime_get_sync(pm2->dev); + + do { + for (i = 0; i < PM2XXX_NUM_INT_REG; i++) { + pm2xxx_reg_read(pm2, pm2xxx_interrupt_registers[i], &(interrupt->reg[i])); - if (interrupt->reg[i] > 0) - interrupt->handler[i](pm2, interrupt->reg[i]); - } + if (interrupt->reg[i] > 0) + interrupt->handler[i](pm2, interrupt->reg[i]); + } + } while (gpio_get_value(pm2->pdata->gpio_irq_number) == 0); + + pm_runtime_mark_last_busy(pm2->dev); + pm_runtime_put_autosuspend(pm2->dev); return IRQ_HANDLED; } @@ -592,6 +617,8 @@ static int pm2xxx_charger_ac_get_property(struct power_supply *psy, val->intval = POWER_SUPPLY_HEALTH_DEAD; else if (pm2->flags.main_thermal_prot) val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else if (pm2->flags.ovv) + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; else val->intval = POWER_SUPPLY_HEALTH_GOOD; break; @@ -674,10 +701,6 @@ static int pm2xxx_charging_init(struct pm2xxx_charger *pm2) ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_LOW_LEV_COMP_REG, PM2XXX_VBAT_LOW_MONITORING_ENA); - /* Disable LED */ - ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG, - PM2XXX_LED_SELECT_DIS); - return ret; } @@ -822,10 +845,54 @@ static void pm2xxx_charger_ac_work(struct work_struct *work) sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present"); }; +static void pm2xxx_charger_check_hw_failure_work(struct work_struct *work) +{ + u8 reg_value; + + struct pm2xxx_charger *pm2 = container_of(work, + struct pm2xxx_charger, check_hw_failure_work.work); + + if (pm2->flags.ovv) { + pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT4, ®_value); + + if (!(reg_value & (PM2XXX_INT4_S_ITVPWR1OVV | + PM2XXX_INT4_S_ITVPWR2OVV))) { + pm2->flags.ovv = false; + power_supply_changed(&pm2->ac_chg.psy); + } + } + + /* If we still have a failure, schedule a new check */ + if (pm2->flags.ovv) { + queue_delayed_work(pm2->charger_wq, + &pm2->check_hw_failure_work, round_jiffies(HZ)); + } +} + static void pm2xxx_charger_check_main_thermal_prot_work( struct work_struct *work) { -}; + int ret; + u8 val; + + struct pm2xxx_charger *pm2 = container_of(work, struct pm2xxx_charger, + check_main_thermal_prot_work); + + /* Check if die temp warning is still active */ + ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT5, &val); + if (ret < 0) { + dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__); + return; + } + if (val & (PM2XXX_INT5_S_ITTHERMALWARNINGRISE + | PM2XXX_INT5_S_ITTHERMALSHUTDOWNRISE)) + pm2->flags.main_thermal_prot = true; + else if (val & (PM2XXX_INT5_S_ITTHERMALWARNINGFALL + | PM2XXX_INT5_S_ITTHERMALSHUTDOWNFALL)) + pm2->flags.main_thermal_prot = false; + + power_supply_changed(&pm2->ac_chg.psy); +} static struct pm2xxx_interrupts pm2xxx_int = { .handler[0] = pm2_int_reg0, @@ -840,24 +907,105 @@ static struct pm2xxx_irq pm2xxx_charger_irq[] = { {"PM2XXX_IRQ_INT", pm2xxx_irq_int}, }; -static int pm2xxx_wall_charger_resume(struct i2c_client *i2c_client) +#ifdef CONFIG_PM + +#ifdef CONFIG_PM_SLEEP + +static int pm2xxx_wall_charger_resume(struct device *dev) { + struct i2c_client *i2c_client = to_i2c_client(dev); + struct pm2xxx_charger *pm2; + + pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(i2c_client); + set_lpn_pin(pm2); + + /* If we still have a HW failure, schedule a new check */ + if (pm2->flags.ovv) + queue_delayed_work(pm2->charger_wq, + &pm2->check_hw_failure_work, 0); + return 0; } -static int pm2xxx_wall_charger_suspend(struct i2c_client *i2c_client, - pm_message_t state) +static int pm2xxx_wall_charger_suspend(struct device *dev) { + struct i2c_client *i2c_client = to_i2c_client(dev); + struct pm2xxx_charger *pm2; + + pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(i2c_client); + clear_lpn_pin(pm2); + + /* Cancel any pending HW failure check */ + if (delayed_work_pending(&pm2->check_hw_failure_work)) + cancel_delayed_work(&pm2->check_hw_failure_work); + + flush_work(&pm2->ac_work); + flush_work(&pm2->check_main_thermal_prot_work); + return 0; } -static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client, +#endif + +#ifdef CONFIG_PM_RUNTIME + +static int pm2xxx_runtime_suspend(struct device *dev) +{ + struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev); + struct pm2xxx_charger *pm2; + int ret = 0; + + pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(pm2xxx_i2c_client); + if (!pm2) { + dev_err(pm2->dev, "no pm2xxx_charger data supplied\n"); + ret = -EINVAL; + return ret; + } + + clear_lpn_pin(pm2); + + return ret; +} + +static int pm2xxx_runtime_resume(struct device *dev) +{ + struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev); + struct pm2xxx_charger *pm2; + int ret = 0; + + pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(pm2xxx_i2c_client); + if (!pm2) { + dev_err(pm2->dev, "no pm2xxx_charger data supplied\n"); + ret = -EINVAL; + return ret; + } + + if (gpio_is_valid(pm2->lpn_pin) && gpio_get_value(pm2->lpn_pin) == 0) + set_lpn_pin(pm2); + + return ret; +} + +#endif + +static const struct dev_pm_ops pm2xxx_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm2xxx_wall_charger_suspend, + pm2xxx_wall_charger_resume) + SET_RUNTIME_PM_OPS(pm2xxx_runtime_suspend, pm2xxx_runtime_resume, NULL) +}; +#define PM2XXX_PM_OPS (&pm2xxx_pm_ops) +#else +#define PM2XXX_PM_OPS NULL +#endif + +static int pm2xxx_wall_charger_probe(struct i2c_client *i2c_client, const struct i2c_device_id *id) { struct pm2xxx_platform_data *pl_data = i2c_client->dev.platform_data; struct pm2xxx_charger *pm2; int ret = 0; u8 val; + int i; pm2 = kzalloc(sizeof(struct pm2xxx_charger), GFP_KERNEL); if (!pm2) { @@ -867,7 +1015,6 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client, /* get parent data */ pm2->dev = &i2c_client->dev; - pm2->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); pm2->pm2_int = &pm2xxx_int; @@ -889,14 +1036,6 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client, pm2->bat = pl_data->battery; - /*get lpn GPIO from platform data*/ - if (!pm2->pdata->lpn_gpio) { - dev_err(pm2->dev, "no lpn gpio data supplied\n"); - ret = -EINVAL; - goto free_device_info; - } - pm2->lpn_pin = pm2->pdata->lpn_gpio; - if (!i2c_check_functionality(i2c_client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_READ_WORD_DATA)) { @@ -945,6 +1084,10 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client, INIT_WORK(&pm2->check_main_thermal_prot_work, pm2xxx_charger_check_main_thermal_prot_work); + /* Init work for HW failure check */ + INIT_DEFERRABLE_WORK(&pm2->check_hw_failure_work, + pm2xxx_charger_check_hw_failure_work); + /* * VDD ADC supply needs to be enabled from this driver when there * is a charger connected to avoid erroneous BTEMP_HIGH/LOW @@ -965,40 +1108,72 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client, } /* Register interrupts */ - ret = request_threaded_irq(pm2->pdata->irq_number, NULL, + ret = request_threaded_irq(gpio_to_irq(pm2->pdata->gpio_irq_number), + NULL, pm2xxx_charger_irq[0].isr, pm2->pdata->irq_type, pm2xxx_charger_irq[0].name, pm2); if (ret != 0) { dev_err(pm2->dev, "failed to request %s IRQ %d: %d\n", - pm2xxx_charger_irq[0].name, pm2->pdata->irq_number, ret); + pm2xxx_charger_irq[0].name, + gpio_to_irq(pm2->pdata->gpio_irq_number), ret); goto unregister_pm2xxx_charger; } - /*Initialize lock*/ - mutex_init(&pm2->lock); + ret = pm_runtime_set_active(pm2->dev); + if (ret) + dev_err(pm2->dev, "set active Error\n"); - /* - * Charger detection mechanism requires pulling up the LPN pin - * while i2c communication if Charger is not connected - * LPN pin of PM2301 is GPIO60 of AB9540 - */ - ret = gpio_request(pm2->lpn_pin, "pm2301_lpm_gpio"); - if (ret < 0) { - dev_err(pm2->dev, "pm2301_lpm_gpio request failed\n"); - goto unregister_pm2xxx_charger; + pm_runtime_enable(pm2->dev); + pm_runtime_set_autosuspend_delay(pm2->dev, PM2XXX_AUTOSUSPEND_DELAY); + pm_runtime_use_autosuspend(pm2->dev); + pm_runtime_resume(pm2->dev); + + /* pm interrupt can wake up system */ + ret = enable_irq_wake(gpio_to_irq(pm2->pdata->gpio_irq_number)); + if (ret) { + dev_err(pm2->dev, "failed to set irq wake\n"); + goto unregister_pm2xxx_interrupt; } - ret = gpio_direction_output(pm2->lpn_pin, 0); - if (ret < 0) { - dev_err(pm2->dev, "pm2301_lpm_gpio direction failed\n"); - goto free_gpio; + + mutex_init(&pm2->lock); + + if (gpio_is_valid(pm2->pdata->lpn_gpio)) { + /* get lpn GPIO from platform data */ + pm2->lpn_pin = pm2->pdata->lpn_gpio; + + /* + * Charger detection mechanism requires pulling up the LPN pin + * while i2c communication if Charger is not connected + * LPN pin of PM2301 is GPIO60 of AB9540 + */ + ret = gpio_request(pm2->lpn_pin, "pm2301_lpm_gpio"); + + if (ret < 0) { + dev_err(pm2->dev, "pm2301_lpm_gpio request failed\n"); + goto disable_pm2_irq_wake; + } + ret = gpio_direction_output(pm2->lpn_pin, 0); + if (ret < 0) { + dev_err(pm2->dev, "pm2301_lpm_gpio direction failed\n"); + goto free_gpio; + } + set_lpn_pin(pm2); } + /* read interrupt registers */ + for (i = 0; i < PM2XXX_NUM_INT_REG; i++) + pm2xxx_reg_read(pm2, + pm2xxx_interrupt_registers[i], + &val); + ret = pm2xxx_charger_detection(pm2, &val); if ((ret == 0) && val) { pm2->ac.charger_connected = 1; + ab8500_override_turn_on_stat(~AB8500_POW_KEY_1_ON, + AB8500_MAIN_CH_DET); pm2->ac_conn = true; power_supply_changed(&pm2->ac_chg.psy); sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present"); @@ -1007,7 +1182,13 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client, return 0; free_gpio: - gpio_free(pm2->lpn_pin); + if (gpio_is_valid(pm2->lpn_pin)) + gpio_free(pm2->lpn_pin); +disable_pm2_irq_wake: + disable_irq_wake(gpio_to_irq(pm2->pdata->gpio_irq_number)); +unregister_pm2xxx_interrupt: + /* disable interrupt */ + free_irq(gpio_to_irq(pm2->pdata->gpio_irq_number), pm2); unregister_pm2xxx_charger: /* unregister power supply */ power_supply_unregister(&pm2->ac_chg.psy); @@ -1018,18 +1199,24 @@ free_charger_wq: destroy_workqueue(pm2->charger_wq); free_device_info: kfree(pm2); + return ret; } -static int __devexit pm2xxx_wall_charger_remove(struct i2c_client *i2c_client) +static int pm2xxx_wall_charger_remove(struct i2c_client *i2c_client) { struct pm2xxx_charger *pm2 = i2c_get_clientdata(i2c_client); + /* Disable pm_runtime */ + pm_runtime_disable(pm2->dev); /* Disable AC charging */ pm2xxx_charger_ac_en(&pm2->ac_chg, false, 0, 0); + /* Disable wake by pm interrupt */ + disable_irq_wake(gpio_to_irq(pm2->pdata->gpio_irq_number)); + /* Disable interrupts */ - free_irq(pm2->pdata->irq_number, pm2); + free_irq(gpio_to_irq(pm2->pdata->gpio_irq_number), pm2); /* Delete the work queue */ destroy_workqueue(pm2->charger_wq); @@ -1041,8 +1228,8 @@ static int __devexit pm2xxx_wall_charger_remove(struct i2c_client *i2c_client) power_supply_unregister(&pm2->ac_chg.psy); - /*Free GPIO60*/ - gpio_free(pm2->lpn_pin); + if (gpio_is_valid(pm2->lpn_pin)) + gpio_free(pm2->lpn_pin); kfree(pm2); @@ -1058,12 +1245,11 @@ MODULE_DEVICE_TABLE(i2c, pm2xxx_id); static struct i2c_driver pm2xxx_charger_driver = { .probe = pm2xxx_wall_charger_probe, - .remove = __devexit_p(pm2xxx_wall_charger_remove), - .suspend = pm2xxx_wall_charger_suspend, - .resume = pm2xxx_wall_charger_resume, + .remove = pm2xxx_wall_charger_remove, .driver = { .name = "pm2xxx-wall_charger", .owner = THIS_MODULE, + .pm = PM2XXX_PM_OPS, }, .id_table = pm2xxx_id, }; @@ -1078,11 +1264,10 @@ static void __exit pm2xxx_charger_exit(void) i2c_del_driver(&pm2xxx_charger_driver); } -subsys_initcall_sync(pm2xxx_charger_init); +device_initcall_sync(pm2xxx_charger_init); module_exit(pm2xxx_charger_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay"); MODULE_ALIAS("platform:pm2xxx-charger"); MODULE_DESCRIPTION("PM2xxx charger management driver"); - diff --git a/drivers/power/pm2301_charger.h b/drivers/power/pm2301_charger.h index e6319cdbc94..8ce3cc0195d 100644 --- a/drivers/power/pm2301_charger.h +++ b/drivers/power/pm2301_charger.h @@ -9,27 +9,6 @@ #ifndef PM2301_CHARGER_H #define PM2301_CHARGER_H -#define MAIN_WDOG_ENA 0x01 -#define MAIN_WDOG_KICK 0x02 -#define MAIN_WDOG_DIS 0x00 -#define CHARG_WD_KICK 0x01 -#define MAIN_CH_ENA 0x01 -#define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02 -#define MAIN_CH_DET 0x01 -#define MAIN_CH_CV_ON 0x04 -#define OTP_ENABLE_WD 0x01 - -#define MAIN_CH_INPUT_CURR_SHIFT 4 - -#define LED_INDICATOR_PWM_ENA 0x01 -#define LED_INDICATOR_PWM_DIS 0x00 -#define LED_IND_CUR_5MA 0x04 -#define LED_INDICATOR_PWM_DUTY_252_256 0xBF - -/* HW failure constants */ -#define MAIN_CH_TH_PROT 0x02 -#define MAIN_CH_NOK 0x01 - /* Watchdog timeout constant */ #define WD_TIMER 0x30 /* 4min */ #define WD_KICK_INTERVAL (30 * HZ) @@ -495,7 +474,6 @@ struct pm2xxx_charger { int failure_input_ovv; unsigned int lpn_pin; struct pm2xxx_interrupts *pm2_int; - struct ab8500_gpadc *gpadc; struct regulator *regu; struct pm2xxx_bm_data *bat; struct mutex lock; @@ -506,6 +484,7 @@ struct pm2xxx_charger { struct delayed_work check_vbat_work; struct work_struct ac_work; struct work_struct check_main_thermal_prot_work; + struct delayed_work check_hw_failure_work; struct ux500_charger ac_chg; struct pm2xxx_charger_event_flags flags; }; diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c index 5deac432e2a..1c517c34e4b 100644 --- a/drivers/power/power_supply_core.c +++ b/drivers/power/power_supply_core.c @@ -26,17 +26,42 @@ EXPORT_SYMBOL_GPL(power_supply_class); static struct device_type power_supply_dev_type; +static bool __power_supply_is_supplied_by(struct power_supply *supplier, + struct power_supply *supply) +{ + int i; + + if (!supply->supplied_from && !supplier->supplied_to) + return false; + + /* Support both supplied_to and supplied_from modes */ + if (supply->supplied_from) { + if (!supplier->name) + return false; + for (i = 0; i < supply->num_supplies; i++) + if (!strcmp(supplier->name, supply->supplied_from[i])) + return true; + } else { + if (!supply->name) + return false; + for (i = 0; i < supplier->num_supplicants; i++) + if (!strcmp(supplier->supplied_to[i], supply->name)) + return true; + } + + return false; +} + static int __power_supply_changed_work(struct device *dev, void *data) { struct power_supply *psy = (struct power_supply *)data; struct power_supply *pst = dev_get_drvdata(dev); - int i; - for (i = 0; i < psy->num_supplicants; i++) - if (!strcmp(psy->supplied_to[i], pst->name)) { - if (pst->external_power_changed) - pst->external_power_changed(pst); - } + if (__power_supply_is_supplied_by(psy, pst)) { + if (pst->external_power_changed) + pst->external_power_changed(pst); + } + return 0; } @@ -63,22 +88,151 @@ void power_supply_changed(struct power_supply *psy) } EXPORT_SYMBOL_GPL(power_supply_changed); +#ifdef CONFIG_OF +#include <linux/of.h> + +static int __power_supply_populate_supplied_from(struct device *dev, + void *data) +{ + struct power_supply *psy = (struct power_supply *)data; + struct power_supply *epsy = dev_get_drvdata(dev); + struct device_node *np; + int i = 0; + + do { + np = of_parse_phandle(psy->of_node, "power-supplies", i++); + if (!np) + continue; + + if (np == epsy->of_node) { + dev_info(psy->dev, "%s: Found supply : %s\n", + psy->name, epsy->name); + psy->supplied_from[i-1] = (char *)epsy->name; + psy->num_supplies++; + break; + } + } while (np); + + return 0; +} + +static int power_supply_populate_supplied_from(struct power_supply *psy) +{ + int error; + + error = class_for_each_device(power_supply_class, NULL, psy, + __power_supply_populate_supplied_from); + + dev_dbg(psy->dev, "%s %d\n", __func__, error); + + return error; +} + +static int __power_supply_find_supply_from_node(struct device *dev, + void *data) +{ + struct device_node *np = (struct device_node *)data; + struct power_supply *epsy = dev_get_drvdata(dev); + + /* return error breaks out of class_for_each_device loop */ + if (epsy->of_node == np) + return -EINVAL; + + return 0; +} + +static int power_supply_find_supply_from_node(struct device_node *supply_node) +{ + int error; + struct device *dev; + struct class_dev_iter iter; + + /* + * Use iterator to see if any other device is registered. + * This is required since class_for_each_device returns 0 + * if there are no devices registered. + */ + class_dev_iter_init(&iter, power_supply_class, NULL, NULL); + dev = class_dev_iter_next(&iter); + + if (!dev) + return -EPROBE_DEFER; + + /* + * We have to treat the return value as inverted, because if + * we return error on not found, then it won't continue looking. + * So we trick it by returning error on success to stop looking + * once the matching device is found. + */ + error = class_for_each_device(power_supply_class, NULL, supply_node, + __power_supply_find_supply_from_node); + + return error ? 0 : -EPROBE_DEFER; +} + +static int power_supply_check_supplies(struct power_supply *psy) +{ + struct device_node *np; + int cnt = 0; + + /* If there is already a list honor it */ + if (psy->supplied_from && psy->num_supplies > 0) + return 0; + + /* No device node found, nothing to do */ + if (!psy->of_node) + return 0; + + do { + int ret; + + np = of_parse_phandle(psy->of_node, "power-supplies", cnt++); + if (!np) + continue; + + ret = power_supply_find_supply_from_node(np); + if (ret) { + dev_dbg(psy->dev, "Failed to find supply, defer!\n"); + return -EPROBE_DEFER; + } + } while (np); + + /* All supplies found, allocate char ** array for filling */ + psy->supplied_from = devm_kzalloc(psy->dev, sizeof(psy->supplied_from), + GFP_KERNEL); + if (!psy->supplied_from) { + dev_err(psy->dev, "Couldn't allocate memory for supply list\n"); + return -ENOMEM; + } + + *psy->supplied_from = devm_kzalloc(psy->dev, sizeof(char *) * cnt, + GFP_KERNEL); + if (!*psy->supplied_from) { + dev_err(psy->dev, "Couldn't allocate memory for supply list\n"); + return -ENOMEM; + } + + return power_supply_populate_supplied_from(psy); +} +#else +static inline int power_supply_check_supplies(struct power_supply *psy) +{ + return 0; +} +#endif + static int __power_supply_am_i_supplied(struct device *dev, void *data) { union power_supply_propval ret = {0,}; struct power_supply *psy = (struct power_supply *)data; struct power_supply *epsy = dev_get_drvdata(dev); - int i; - for (i = 0; i < epsy->num_supplicants; i++) { - if (!strcmp(epsy->supplied_to[i], psy->name)) { - if (epsy->get_property(epsy, - POWER_SUPPLY_PROP_ONLINE, &ret)) - continue; + if (__power_supply_is_supplied_by(epsy, psy)) + if (!epsy->get_property(epsy, POWER_SUPPLY_PROP_ONLINE, &ret)) { if (ret.intval) return ret.intval; } - } + return 0; } @@ -336,6 +490,12 @@ int power_supply_register(struct device *parent, struct power_supply *psy) INIT_WORK(&psy->changed_work, power_supply_changed_work); + rc = power_supply_check_supplies(psy); + if (rc) { + dev_info(dev, "Not all required supplies found, defer probe\n"); + goto check_supplies_failed; + } + rc = kobject_set_name(&dev->kobj, "%s", psy->name); if (rc) goto kobject_set_name_failed; @@ -368,6 +528,7 @@ register_thermal_failed: device_del(dev); kobject_set_name_failed: device_add_failed: +check_supplies_failed: put_device(dev); success: return rc; diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 1ae65b82286..349e9ae8090 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -30,3 +30,10 @@ config POWER_RESET_RESTART Some boards don't actually have the ability to power off. Instead they restart, and u-boot holds the SoC until the user presses a key. u-boot then boots into Linux. + +config POWER_RESET_VEXPRESS + bool + depends on POWER_RESET + help + Power off and reset support for the ARM Ltd. Versatile + Express boards. diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 0f317f50c56..372807fd83f 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o -obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
\ No newline at end of file +obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o +obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c new file mode 100644 index 00000000000..469e6962b2c --- /dev/null +++ b/drivers/power/reset/vexpress-poweroff.c @@ -0,0 +1,146 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#include <linux/jiffies.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/stat.h> +#include <linux/vexpress.h> + +#include <asm/system_misc.h> + +static void vexpress_reset_do(struct device *dev, const char *what) +{ + int err = -ENOENT; + struct vexpress_config_func *func = + vexpress_config_func_get_by_dev(dev); + + if (func) { + unsigned long timeout; + + err = vexpress_config_write(func, 0, 0); + + timeout = jiffies + HZ; + while (time_before(jiffies, timeout)) + cpu_relax(); + } + + dev_emerg(dev, "Unable to %s (%d)\n", what, err); +} + +static struct device *vexpress_power_off_device; + +static void vexpress_power_off(void) +{ + vexpress_reset_do(vexpress_power_off_device, "power off"); +} + +static struct device *vexpress_restart_device; + +static void vexpress_restart(char str, const char *cmd) +{ + vexpress_reset_do(vexpress_restart_device, "restart"); +} + +static ssize_t vexpress_reset_active_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", vexpress_restart_device == dev); +} + +static ssize_t vexpress_reset_active_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + long value; + int err = kstrtol(buf, 0, &value); + + if (!err && value) + vexpress_restart_device = dev; + + return err ? err : count; +} + +DEVICE_ATTR(active, S_IRUGO | S_IWUSR, vexpress_reset_active_show, + vexpress_reset_active_store); + + +enum vexpress_reset_func { FUNC_RESET, FUNC_SHUTDOWN, FUNC_REBOOT }; + +static struct of_device_id vexpress_reset_of_match[] = { + { + .compatible = "arm,vexpress-reset", + .data = (void *)FUNC_RESET, + }, { + .compatible = "arm,vexpress-shutdown", + .data = (void *)FUNC_SHUTDOWN + }, { + .compatible = "arm,vexpress-reboot", + .data = (void *)FUNC_REBOOT + }, + {} +}; + +static int vexpress_reset_probe(struct platform_device *pdev) +{ + enum vexpress_reset_func func; + const struct of_device_id *match = + of_match_device(vexpress_reset_of_match, &pdev->dev); + + if (match) + func = (enum vexpress_reset_func)match->data; + else + func = pdev->id_entry->driver_data; + + switch (func) { + case FUNC_SHUTDOWN: + vexpress_power_off_device = &pdev->dev; + pm_power_off = vexpress_power_off; + break; + case FUNC_RESET: + if (!vexpress_restart_device) + vexpress_restart_device = &pdev->dev; + arm_pm_restart = vexpress_restart; + device_create_file(&pdev->dev, &dev_attr_active); + break; + case FUNC_REBOOT: + vexpress_restart_device = &pdev->dev; + arm_pm_restart = vexpress_restart; + device_create_file(&pdev->dev, &dev_attr_active); + break; + }; + + return 0; +} + +static const struct platform_device_id vexpress_reset_id_table[] = { + { .name = "vexpress-reset", .driver_data = FUNC_RESET, }, + { .name = "vexpress-shutdown", .driver_data = FUNC_SHUTDOWN, }, + { .name = "vexpress-reboot", .driver_data = FUNC_REBOOT, }, + {} +}; + +static struct platform_driver vexpress_reset_driver = { + .probe = vexpress_reset_probe, + .driver = { + .name = "vexpress-reset", + .of_match_table = vexpress_reset_of_match, + }, + .id_table = vexpress_reset_id_table, +}; + +static int __init vexpress_reset_init(void) +{ + return platform_driver_register(&vexpress_reset_driver); +} +device_initcall(vexpress_reset_init); diff --git a/drivers/power/rx51_battery.c b/drivers/power/rx51_battery.c index 8208888b844..cbde1d6d322 100644 --- a/drivers/power/rx51_battery.c +++ b/drivers/power/rx51_battery.c @@ -42,6 +42,7 @@ static int rx51_battery_read_adc(int channel) req.method = TWL4030_MADC_SW1; req.func_cb = NULL; req.type = TWL4030_MADC_WAIT; + req.raw = true; if (twl4030_madc_conversion(&req) <= 0) return -ENODATA; @@ -119,7 +120,7 @@ static int rx51_battery_read_temperature(struct rx51_device_info *di) /* First check for temperature in first direct table */ if (raw < ARRAY_SIZE(rx51_temp_table1)) - return rx51_temp_table1[raw] * 100; + return rx51_temp_table1[raw] * 10; /* Binary search RAW value in second inverse table */ while (max - min > 1) { @@ -132,7 +133,7 @@ static int rx51_battery_read_temperature(struct rx51_device_info *di) break; } - return (rx51_temp_table2_first - min) * 100; + return (rx51_temp_table2_first - min) * 10; } /* @@ -202,7 +203,7 @@ static int rx51_battery_probe(struct platform_device *pdev) struct rx51_device_info *di; int ret; - di = kzalloc(sizeof(*di), GFP_KERNEL); + di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL); if (!di) return -ENOMEM; @@ -217,7 +218,6 @@ static int rx51_battery_probe(struct platform_device *pdev) ret = power_supply_register(di->dev, &di->bat); if (ret) { platform_set_drvdata(pdev, NULL); - kfree(di); return ret; } @@ -230,7 +230,6 @@ static int rx51_battery_remove(struct platform_device *pdev) power_supply_unregister(&di->bat); platform_set_drvdata(pdev, NULL); - kfree(di); return 0; } diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c index d2ca989dcbd..5948ce058bd 100644 --- a/drivers/power/s3c_adc_battery.c +++ b/drivers/power/s3c_adc_battery.c @@ -145,14 +145,17 @@ static int s3c_adc_bat_get_property(struct power_supply *psy, int new_level; int full_volt; - const struct s3c_adc_bat_thresh *lut = bat->pdata->lut_noac; - unsigned int lut_size = bat->pdata->lut_noac_cnt; + const struct s3c_adc_bat_thresh *lut; + unsigned int lut_size; if (!bat) { dev_err(psy->dev, "no battery infos ?!\n"); return -EINVAL; } + lut = bat->pdata->lut_noac; + lut_size = bat->pdata->lut_noac_cnt; + if (bat->volt_value < 0 || bat->cur_value < 0 || jiffies_to_msecs(jiffies - bat->timestamp) > BAT_POLL_INTERVAL) { diff --git a/drivers/power/sbs-battery.c b/drivers/power/sbs-battery.c index 3960f0b2afe..c8c78a74e75 100644 --- a/drivers/power/sbs-battery.c +++ b/drivers/power/sbs-battery.c @@ -27,6 +27,7 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/gpio.h> +#include <linux/of.h> #include <linux/power/sbs-battery.h> @@ -667,7 +668,6 @@ of_out: return pdata; } #else -#define sbs_dt_ids NULL static struct sbs_platform_data *sbs_of_populate_pdata( struct i2c_client *client) { @@ -820,10 +820,11 @@ static int sbs_remove(struct i2c_client *client) return 0; } -#if defined CONFIG_PM -static int sbs_suspend(struct i2c_client *client, - pm_message_t state) +#if defined CONFIG_PM_SLEEP + +static int sbs_suspend(struct device *dev) { + struct i2c_client *client = to_i2c_client(dev); struct sbs_info *chip = i2c_get_clientdata(client); s32 ret; @@ -838,11 +839,13 @@ static int sbs_suspend(struct i2c_client *client, return 0; } + +static SIMPLE_DEV_PM_OPS(sbs_pm_ops, sbs_suspend, NULL); +#define SBS_PM_OPS (&sbs_pm_ops) + #else -#define sbs_suspend NULL +#define SBS_PM_OPS NULL #endif -/* any smbus transaction will wake up sbs */ -#define sbs_resume NULL static const struct i2c_device_id sbs_id[] = { { "bq20z75", 0 }, @@ -854,12 +857,11 @@ MODULE_DEVICE_TABLE(i2c, sbs_id); static struct i2c_driver sbs_battery_driver = { .probe = sbs_probe, .remove = sbs_remove, - .suspend = sbs_suspend, - .resume = sbs_resume, .id_table = sbs_id, .driver = { .name = "sbs-battery", - .of_match_table = sbs_dt_ids, + .of_match_table = of_match_ptr(sbs_dt_ids), + .pm = SBS_PM_OPS, }, }; module_i2c_driver(sbs_battery_driver); diff --git a/drivers/power/test_power.c b/drivers/power/test_power.c index b99a452a4fd..0152f35dca5 100644 --- a/drivers/power/test_power.c +++ b/drivers/power/test_power.c @@ -30,6 +30,8 @@ static int battery_technology = POWER_SUPPLY_TECHNOLOGY_LION; static int battery_capacity = 50; static int battery_voltage = 3300; +static bool module_initialized; + static int test_power_get_ac_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -185,6 +187,7 @@ static int __init test_power_init(void) } } + module_initialized = true; return 0; failed: while (--i >= 0) @@ -209,6 +212,8 @@ static void __exit test_power_exit(void) for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++) power_supply_unregister(&test_power_supplies[i]); + + module_initialized = false; } module_exit(test_power_exit); @@ -221,8 +226,8 @@ struct battery_property_map { }; static struct battery_property_map map_ac_online[] = { - { 0, "on" }, - { 1, "off" }, + { 0, "off" }, + { 1, "on" }, { -1, NULL }, }; @@ -295,10 +300,16 @@ static const char *map_get_key(struct battery_property_map *map, int value, return def_key; } +static inline void signal_power_supply_changed(struct power_supply *psy) +{ + if (module_initialized) + power_supply_changed(psy); +} + static int param_set_ac_online(const char *key, const struct kernel_param *kp) { ac_online = map_get_value(map_ac_online, key, ac_online); - power_supply_changed(&test_power_supplies[0]); + signal_power_supply_changed(&test_power_supplies[0]); return 0; } @@ -311,7 +322,7 @@ static int param_get_ac_online(char *buffer, const struct kernel_param *kp) static int param_set_usb_online(const char *key, const struct kernel_param *kp) { usb_online = map_get_value(map_ac_online, key, usb_online); - power_supply_changed(&test_power_supplies[2]); + signal_power_supply_changed(&test_power_supplies[2]); return 0; } @@ -325,7 +336,7 @@ static int param_set_battery_status(const char *key, const struct kernel_param *kp) { battery_status = map_get_value(map_status, key, battery_status); - power_supply_changed(&test_power_supplies[1]); + signal_power_supply_changed(&test_power_supplies[1]); return 0; } @@ -339,7 +350,7 @@ static int param_set_battery_health(const char *key, const struct kernel_param *kp) { battery_health = map_get_value(map_health, key, battery_health); - power_supply_changed(&test_power_supplies[1]); + signal_power_supply_changed(&test_power_supplies[1]); return 0; } @@ -353,7 +364,7 @@ static int param_set_battery_present(const char *key, const struct kernel_param *kp) { battery_present = map_get_value(map_present, key, battery_present); - power_supply_changed(&test_power_supplies[0]); + signal_power_supply_changed(&test_power_supplies[0]); return 0; } @@ -369,7 +380,7 @@ static int param_set_battery_technology(const char *key, { battery_technology = map_get_value(map_technology, key, battery_technology); - power_supply_changed(&test_power_supplies[1]); + signal_power_supply_changed(&test_power_supplies[1]); return 0; } @@ -390,7 +401,7 @@ static int param_set_battery_capacity(const char *key, return -EINVAL; battery_capacity = tmp; - power_supply_changed(&test_power_supplies[1]); + signal_power_supply_changed(&test_power_supplies[1]); return 0; } @@ -405,7 +416,7 @@ static int param_set_battery_voltage(const char *key, return -EINVAL; battery_voltage = tmp; - power_supply_changed(&test_power_supplies[1]); + signal_power_supply_changed(&test_power_supplies[1]); return 0; } diff --git a/drivers/power/tps65090-charger.c b/drivers/power/tps65090-charger.c new file mode 100644 index 00000000000..9fbca310a2a --- /dev/null +++ b/drivers/power/tps65090-charger.c @@ -0,0 +1,320 @@ +/* + * Battery charger driver for TI's tps65090 + * + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. + + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/err.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/mfd/tps65090.h> + +#define TPS65090_REG_INTR_STS 0x00 +#define TPS65090_REG_CG_CTRL0 0x04 +#define TPS65090_REG_CG_CTRL1 0x05 +#define TPS65090_REG_CG_CTRL2 0x06 +#define TPS65090_REG_CG_CTRL3 0x07 +#define TPS65090_REG_CG_CTRL4 0x08 +#define TPS65090_REG_CG_CTRL5 0x09 +#define TPS65090_REG_CG_STATUS1 0x0a +#define TPS65090_REG_CG_STATUS2 0x0b + +#define TPS65090_CHARGER_ENABLE BIT(0) +#define TPS65090_VACG BIT(1) +#define TPS65090_NOITERM BIT(5) + +struct tps65090_charger { + struct device *dev; + int ac_online; + int prev_ac_online; + int irq; + struct power_supply ac; + struct tps65090_platform_data *pdata; +}; + +static enum power_supply_property tps65090_ac_props[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static int tps65090_low_chrg_current(struct tps65090_charger *charger) +{ + int ret; + + ret = tps65090_write(charger->dev->parent, TPS65090_REG_CG_CTRL5, + TPS65090_NOITERM); + if (ret < 0) { + dev_err(charger->dev, "%s(): error reading in register 0x%x\n", + __func__, TPS65090_REG_CG_CTRL5); + return ret; + } + return 0; +} + +static int tps65090_enable_charging(struct tps65090_charger *charger, + uint8_t enable) +{ + int ret; + uint8_t ctrl0 = 0; + + ret = tps65090_read(charger->dev->parent, TPS65090_REG_CG_CTRL0, + &ctrl0); + if (ret < 0) { + dev_err(charger->dev, "%s(): error reading in register 0x%x\n", + __func__, TPS65090_REG_CG_CTRL0); + return ret; + } + + ret = tps65090_write(charger->dev->parent, TPS65090_REG_CG_CTRL0, + (ctrl0 | TPS65090_CHARGER_ENABLE)); + if (ret < 0) { + dev_err(charger->dev, "%s(): error reading in register 0x%x\n", + __func__, TPS65090_REG_CG_CTRL0); + return ret; + } + return 0; +} + +static int tps65090_config_charger(struct tps65090_charger *charger) +{ + int ret; + + if (charger->pdata->enable_low_current_chrg) { + ret = tps65090_low_chrg_current(charger); + if (ret < 0) { + dev_err(charger->dev, + "error configuring low charge current\n"); + return ret; + } + } + + return 0; +} + +static int tps65090_ac_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct tps65090_charger *charger = container_of(psy, + struct tps65090_charger, ac); + + if (psp == POWER_SUPPLY_PROP_ONLINE) { + val->intval = charger->ac_online; + charger->prev_ac_online = charger->ac_online; + return 0; + } + return -EINVAL; +} + +static irqreturn_t tps65090_charger_isr(int irq, void *dev_id) +{ + struct tps65090_charger *charger = dev_id; + int ret; + uint8_t status1 = 0; + uint8_t intrsts = 0; + + ret = tps65090_read(charger->dev->parent, TPS65090_REG_CG_STATUS1, + &status1); + if (ret < 0) { + dev_err(charger->dev, "%s(): Error in reading reg 0x%x\n", + __func__, TPS65090_REG_CG_STATUS1); + return IRQ_HANDLED; + } + msleep(75); + ret = tps65090_read(charger->dev->parent, TPS65090_REG_INTR_STS, + &intrsts); + if (ret < 0) { + dev_err(charger->dev, "%s(): Error in reading reg 0x%x\n", + __func__, TPS65090_REG_INTR_STS); + return IRQ_HANDLED; + } + + if (intrsts & TPS65090_VACG) { + ret = tps65090_enable_charging(charger, 1); + if (ret < 0) + return IRQ_HANDLED; + charger->ac_online = 1; + } else { + charger->ac_online = 0; + } + + if (charger->prev_ac_online != charger->ac_online) + power_supply_changed(&charger->ac); + + return IRQ_HANDLED; +} + +#if defined(CONFIG_OF) + +#include <linux/of_device.h> + +static struct tps65090_platform_data * + tps65090_parse_dt_charger_data(struct platform_device *pdev) +{ + struct tps65090_platform_data *pdata; + struct device_node *np = pdev->dev.of_node; + unsigned int prop; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, "Memory alloc for tps65090_pdata failed\n"); + return NULL; + } + + prop = of_property_read_bool(np, "ti,enable-low-current-chrg"); + pdata->enable_low_current_chrg = prop; + + pdata->irq_base = -1; + + return pdata; + +} +#else +static struct tps65090_platform_data * + tps65090_parse_dt_charger_data(struct platform_device *pdev) +{ + return NULL; +} +#endif + +static int tps65090_charger_probe(struct platform_device *pdev) +{ + struct tps65090_charger *cdata; + struct tps65090_platform_data *pdata; + uint8_t status1 = 0; + int ret; + int irq; + + pdata = dev_get_platdata(pdev->dev.parent); + + if (!pdata && pdev->dev.of_node) + pdata = tps65090_parse_dt_charger_data(pdev); + + if (!pdata) { + dev_err(&pdev->dev, "%s():no platform data available\n", + __func__); + return -ENODEV; + } + + cdata = devm_kzalloc(&pdev->dev, sizeof(*cdata), GFP_KERNEL); + if (!cdata) { + dev_err(&pdev->dev, "failed to allocate memory status\n"); + return -ENOMEM; + } + + dev_set_drvdata(&pdev->dev, cdata); + + cdata->dev = &pdev->dev; + cdata->pdata = pdata; + + cdata->ac.name = "tps65090-ac"; + cdata->ac.type = POWER_SUPPLY_TYPE_MAINS; + cdata->ac.get_property = tps65090_ac_get_property; + cdata->ac.properties = tps65090_ac_props; + cdata->ac.num_properties = ARRAY_SIZE(tps65090_ac_props); + cdata->ac.supplied_to = pdata->supplied_to; + cdata->ac.num_supplicants = pdata->num_supplicants; + + ret = power_supply_register(&pdev->dev, &cdata->ac); + if (ret) { + dev_err(&pdev->dev, "failed: power supply register\n"); + return ret; + } + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_warn(&pdev->dev, "Unable to get charger irq = %d\n", irq); + ret = irq; + goto fail_unregister_supply; + } + + cdata->irq = irq; + + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + tps65090_charger_isr, 0, "tps65090-charger", cdata); + if (ret) { + dev_err(cdata->dev, "Unable to register irq %d err %d\n", irq, + ret); + goto fail_free_irq; + } + + ret = tps65090_config_charger(cdata); + if (ret < 0) { + dev_err(&pdev->dev, "charger config failed, err %d\n", ret); + goto fail_free_irq; + } + + /* Check for charger presence */ + ret = tps65090_read(cdata->dev->parent, TPS65090_REG_CG_STATUS1, + &status1); + if (ret < 0) { + dev_err(cdata->dev, "%s(): Error in reading reg 0x%x", __func__, + TPS65090_REG_CG_STATUS1); + goto fail_free_irq; + } + + if (status1 != 0) { + ret = tps65090_enable_charging(cdata, 1); + if (ret < 0) { + dev_err(cdata->dev, "error enabling charger\n"); + goto fail_free_irq; + } + cdata->ac_online = 1; + power_supply_changed(&cdata->ac); + } + + return 0; + +fail_free_irq: + devm_free_irq(cdata->dev, irq, cdata); +fail_unregister_supply: + power_supply_unregister(&cdata->ac); + + return ret; +} + +static int tps65090_charger_remove(struct platform_device *pdev) +{ + struct tps65090_charger *cdata = dev_get_drvdata(&pdev->dev); + + devm_free_irq(cdata->dev, cdata->irq, cdata); + power_supply_unregister(&cdata->ac); + + return 0; +} + +static struct of_device_id of_tps65090_charger_match[] = { + { .compatible = "ti,tps65090-charger", }, + { /* end */ } +}; + +static struct platform_driver tps65090_charger_driver = { + .driver = { + .name = "tps65090-charger", + .of_match_table = of_tps65090_charger_match, + .owner = THIS_MODULE, + }, + .probe = tps65090_charger_probe, + .remove = tps65090_charger_remove, +}; +module_platform_driver(tps65090_charger_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Syed Rafiuddin <srafiuddin@nvidia.com>"); +MODULE_DESCRIPTION("tps65090 battery charger driver"); diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c index a69d0d11b54..bed458172dd 100644 --- a/drivers/power/twl4030_charger.c +++ b/drivers/power/twl4030_charger.c @@ -636,17 +636,7 @@ static struct platform_driver twl4030_bci_driver = { .remove = __exit_p(twl4030_bci_remove), }; -static int __init twl4030_bci_init(void) -{ - return platform_driver_probe(&twl4030_bci_driver, twl4030_bci_probe); -} -module_init(twl4030_bci_init); - -static void __exit twl4030_bci_exit(void) -{ - platform_driver_unregister(&twl4030_bci_driver); -} -module_exit(twl4030_bci_exit); +module_platform_driver_probe(twl4030_bci_driver, twl4030_bci_probe); MODULE_AUTHOR("GraÅžvydas Ignotas"); MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver"); diff --git a/drivers/power/wm831x_backup.c b/drivers/power/wm831x_backup.c index d9cc169f142..58cbb009b74 100644 --- a/drivers/power/wm831x_backup.c +++ b/drivers/power/wm831x_backup.c @@ -169,7 +169,8 @@ static int wm831x_backup_probe(struct platform_device *pdev) struct power_supply *backup; int ret; - devdata = kzalloc(sizeof(struct wm831x_backup), GFP_KERNEL); + devdata = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_backup), + GFP_KERNEL); if (devdata == NULL) return -ENOMEM; @@ -197,14 +198,8 @@ static int wm831x_backup_probe(struct platform_device *pdev) backup->num_properties = ARRAY_SIZE(wm831x_backup_props); backup->get_property = wm831x_backup_get_prop; ret = power_supply_register(&pdev->dev, backup); - if (ret) - goto err_kmalloc; return ret; - -err_kmalloc: - kfree(devdata); - return ret; } static int wm831x_backup_remove(struct platform_device *pdev) @@ -213,7 +208,6 @@ static int wm831x_backup_remove(struct platform_device *pdev) power_supply_unregister(&devdata->backup); kfree(devdata->backup.name); - kfree(devdata); return 0; } |