diff options
Diffstat (limited to 'drivers/pwm/pwm-tiecap.c')
| -rw-r--r-- | drivers/pwm/pwm-tiecap.c | 42 |
1 files changed, 41 insertions, 1 deletions
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index d6d4cf05565..0f541c5cbe9 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -25,6 +25,9 @@ #include <linux/clk.h> #include <linux/pm_runtime.h> #include <linux/pwm.h> +#include <linux/of_device.h> + +#include "pwm-tipwmss.h" /* ECAP registers and bits definitions */ #define CAP1 0x08 @@ -184,12 +187,19 @@ static const struct pwm_ops ecap_pwm_ops = { .owner = THIS_MODULE, }; +static const struct of_device_id ecap_of_match[] = { + { .compatible = "ti,am33xx-ecap" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ecap_of_match); + static int __devinit ecap_pwm_probe(struct platform_device *pdev) { int ret; struct resource *r; struct clk *clk; struct ecap_pwm_chip *pc; + u16 status; pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); if (!pc) { @@ -211,6 +221,8 @@ static int __devinit ecap_pwm_probe(struct platform_device *pdev) pc->chip.dev = &pdev->dev; pc->chip.ops = &ecap_pwm_ops; + pc->chip.of_xlate = of_pwm_xlate_with_flags; + pc->chip.of_pwm_n_cells = 3; pc->chip.base = -1; pc->chip.npwm = 1; @@ -231,14 +243,40 @@ static int __devinit ecap_pwm_probe(struct platform_device *pdev) } pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + status = pwmss_submodule_state_change(pdev->dev.parent, + PWMSS_ECAPCLK_EN); + if (!(status & PWMSS_ECAPCLK_EN_ACK)) { + dev_err(&pdev->dev, "PWMSS config space clock enable failed\n"); + ret = -EINVAL; + goto pwmss_clk_failure; + } + + pm_runtime_put_sync(&pdev->dev); + platform_set_drvdata(pdev, pc); return 0; + +pwmss_clk_failure: + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pwmchip_remove(&pc->chip); + return ret; } static int __devexit ecap_pwm_remove(struct platform_device *pdev) { struct ecap_pwm_chip *pc = platform_get_drvdata(pdev); + pm_runtime_get_sync(&pdev->dev); + /* + * Due to hardware misbehaviour, acknowledge of the stop_req + * is missing. Hence checking of the status bit skipped. + */ + pwmss_submodule_state_change(pdev->dev.parent, PWMSS_ECAPCLK_STOP_REQ); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); return pwmchip_remove(&pc->chip); @@ -246,7 +284,9 @@ static int __devexit ecap_pwm_remove(struct platform_device *pdev) static struct platform_driver ecap_pwm_driver = { .driver = { - .name = "ecap", + .name = "ecap", + .owner = THIS_MODULE, + .of_match_table = ecap_of_match, }, .probe = ecap_pwm_probe, .remove = __devexit_p(ecap_pwm_remove), |