summaryrefslogtreecommitdiffstats
path: root/drivers/pwm
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pwm')
-rw-r--r--drivers/pwm/Kconfig39
-rw-r--r--drivers/pwm/Makefile5
-rw-r--r--drivers/pwm/core.c29
-rw-r--r--drivers/pwm/pwm-imx.c2
-rw-r--r--drivers/pwm/pwm-lpc32xx.c23
-rw-r--r--drivers/pwm/pwm-samsung.c1
-rw-r--r--drivers/pwm/pwm-spear.c276
-rw-r--r--drivers/pwm/pwm-tiecap.c48
-rw-r--r--drivers/pwm/pwm-tiehrpwm.c62
-rw-r--r--drivers/pwm/pwm-tipwmss.c139
-rw-r--r--drivers/pwm/pwm-tipwmss.h39
-rw-r--r--drivers/pwm/pwm-twl-led.c344
-rw-r--r--drivers/pwm/pwm-twl.c359
-rw-r--r--drivers/pwm/pwm-twl6030.c184
-rw-r--r--drivers/pwm/pwm-vt8500.c98
15 files changed, 1430 insertions, 218 deletions
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index ed81720e7b2..e513cd99817 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -112,6 +112,17 @@ config PWM_SAMSUNG
To compile this driver as a module, choose M here: the module
will be called pwm-samsung.
+config PWM_SPEAR
+ tristate "STMicroelectronics SPEAr PWM support"
+ depends on PLAT_SPEAR
+ depends on OF
+ help
+ Generic PWM framework driver for the PWM controller on ST
+ SPEAr SoCs.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-spear.
+
config PWM_TEGRA
tristate "NVIDIA Tegra PWM support"
depends on ARCH_TEGRA
@@ -125,6 +136,7 @@ config PWM_TEGRA
config PWM_TIECAP
tristate "ECAP PWM support"
depends on SOC_AM33XX
+ select PWM_TIPWMSS
help
PWM driver support for the ECAP APWM controller found on AM33XX
TI SOC
@@ -135,6 +147,7 @@ config PWM_TIECAP
config PWM_TIEHRPWM
tristate "EHRPWM PWM support"
depends on SOC_AM33XX
+ select PWM_TIPWMSS
help
PWM driver support for the EHRPWM controller found on AM33XX
TI SOC
@@ -142,14 +155,32 @@ config PWM_TIEHRPWM
To compile this driver as a module, choose M here: the module
will be called pwm-tiehrpwm.
-config PWM_TWL6030
- tristate "TWL6030 PWM support"
+config PWM_TIPWMSS
+ bool
+ depends on SOC_AM33XX && (PWM_TIEHRPWM || PWM_TIECAP)
+ help
+ PWM Subsystem driver support for AM33xx SOC.
+
+ PWM submodules require PWM config space access from submodule
+ drivers and require common parent driver support.
+
+config PWM_TWL
+ tristate "TWL4030/6030 PWM support"
+ depends on TWL4030_CORE
+ help
+ Generic PWM framework driver for TWL4030/6030.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-twl.
+
+config PWM_TWL_LED
+ tristate "TWL4030/6030 PWM support for LED drivers"
depends on TWL4030_CORE
help
- Generic PWM framework driver for TWL6030.
+ Generic PWM framework driver for TWL4030/6030 LED terminals.
To compile this driver as a module, choose M here: the module
- will be called pwm-twl6030.
+ will be called pwm-twl-led.
config PWM_VT8500
tristate "vt8500 pwm support"
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index acfe4821c58..62a2963cfe5 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -8,8 +8,11 @@ obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o
obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
+obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o
-obj-$(CONFIG_PWM_TWL6030) += pwm-twl6030.o
+obj-$(CONFIG_PWM_TIPWMSS) += pwm-tipwmss.o
+obj-$(CONFIG_PWM_TWL) += pwm-twl.o
+obj-$(CONFIG_PWM_TWL_LED) += pwm-twl-led.o
obj-$(CONFIG_PWM_VT8500) += pwm-vt8500.o
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index f5acdaa5270..903138b1884 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -32,6 +32,9 @@
#define MAX_PWMS 1024
+/* flags in the third cell of the DT PWM specifier */
+#define PWM_SPEC_POLARITY (1 << 0)
+
static DEFINE_MUTEX(pwm_lookup_lock);
static LIST_HEAD(pwm_lookup_list);
static DEFINE_MUTEX(pwm_lock);
@@ -129,6 +132,32 @@ static int pwm_device_request(struct pwm_device *pwm, const char *label)
return 0;
}
+struct pwm_device *
+of_pwm_xlate_with_flags(struct pwm_chip *pc, const struct of_phandle_args *args)
+{
+ struct pwm_device *pwm;
+
+ if (pc->of_pwm_n_cells < 3)
+ return ERR_PTR(-EINVAL);
+
+ if (args->args[0] >= pc->npwm)
+ return ERR_PTR(-EINVAL);
+
+ pwm = pwm_request_from_chip(pc, args->args[0], NULL);
+ if (IS_ERR(pwm))
+ return pwm;
+
+ pwm_set_period(pwm, args->args[1]);
+
+ if (args->args[2] & PWM_SPEC_POLARITY)
+ pwm_set_polarity(pwm, PWM_POLARITY_INVERSED);
+ else
+ pwm_set_polarity(pwm, PWM_POLARITY_NORMAL);
+
+ return pwm;
+}
+EXPORT_SYMBOL_GPL(of_pwm_xlate_with_flags);
+
static struct pwm_device *
of_pwm_simple_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
{
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index 8f26e9fcea9..65a86bdeabe 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -235,7 +235,7 @@ static int imx_pwm_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(imx_pwm_dt_ids, &pdev->dev);
- struct imx_pwm_data *data;
+ const struct imx_pwm_data *data;
struct imx_chip *imx;
struct resource *r;
int ret = 0;
diff --git a/drivers/pwm/pwm-lpc32xx.c b/drivers/pwm/pwm-lpc32xx.c
index 015a8223562..14106440294 100644
--- a/drivers/pwm/pwm-lpc32xx.c
+++ b/drivers/pwm/pwm-lpc32xx.c
@@ -49,9 +49,24 @@ static int lpc32xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
c = 0; /* 0 set division by 256 */
period_cycles = c;
+ /* The duty-cycle value is as follows:
+ *
+ * DUTY-CYCLE HIGH LEVEL
+ * 1 99.9%
+ * 25 90.0%
+ * 128 50.0%
+ * 220 10.0%
+ * 255 0.1%
+ * 0 0.0%
+ *
+ * In other words, the register value is duty-cycle % 256 with
+ * duty-cycle in the range 1-256.
+ */
c = 256 * duty_ns;
do_div(c, period_ns);
- duty_cycles = c;
+ if (c > 255)
+ c = 255;
+ duty_cycles = 256 - c;
writel(PWM_ENABLE | PWM_RELOADV(period_cycles) | PWM_DUTY(duty_cycles),
lpc32xx->base + (pwm->hwpwm << 2));
@@ -106,6 +121,7 @@ static int lpc32xx_pwm_probe(struct platform_device *pdev)
lpc32xx->chip.dev = &pdev->dev;
lpc32xx->chip.ops = &lpc32xx_pwm_ops;
lpc32xx->chip.npwm = 2;
+ lpc32xx->chip.base = -1;
ret = pwmchip_add(&lpc32xx->chip);
if (ret < 0) {
@@ -121,8 +137,11 @@ static int lpc32xx_pwm_probe(struct platform_device *pdev)
static int lpc32xx_pwm_remove(struct platform_device *pdev)
{
struct lpc32xx_pwm_chip *lpc32xx = platform_get_drvdata(pdev);
+ unsigned int i;
+
+ for (i = 0; i < lpc32xx->chip.npwm; i++)
+ pwm_disable(&lpc32xx->chip.pwms[i]);
- clk_disable(lpc32xx->clk);
return pwmchip_remove(&lpc32xx->chip);
}
diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
index e9b15d099c0..5207e6cd864 100644
--- a/drivers/pwm/pwm-samsung.c
+++ b/drivers/pwm/pwm-samsung.c
@@ -222,6 +222,7 @@ static int s3c_pwm_probe(struct platform_device *pdev)
/* calculate base of control bits in TCON */
s3c->tcon_base = id == 0 ? 0 : (id * 4) + 4;
+ s3c->pwm_id = id;
s3c->chip.dev = &pdev->dev;
s3c->chip.ops = &s3c_pwm_ops;
s3c->chip.base = -1;
diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c
new file mode 100644
index 00000000000..83b21d9d5cf
--- /dev/null
+++ b/drivers/pwm/pwm-spear.c
@@ -0,0 +1,276 @@
+/*
+ * ST Microelectronics SPEAr Pulse Width Modulator driver
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Shiraz Hashim <shiraz.hashim@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define NUM_PWM 4
+
+/* PWM registers and bits definitions */
+#define PWMCR 0x00 /* Control Register */
+#define PWMCR_PWM_ENABLE 0x1
+#define PWMCR_PRESCALE_SHIFT 2
+#define PWMCR_MIN_PRESCALE 0x00
+#define PWMCR_MAX_PRESCALE 0x3FFF
+
+#define PWMDCR 0x04 /* Duty Cycle Register */
+#define PWMDCR_MIN_DUTY 0x0001
+#define PWMDCR_MAX_DUTY 0xFFFF
+
+#define PWMPCR 0x08 /* Period Register */
+#define PWMPCR_MIN_PERIOD 0x0001
+#define PWMPCR_MAX_PERIOD 0xFFFF
+
+/* Following only available on 13xx SoCs */
+#define PWMMCR 0x3C /* Master Control Register */
+#define PWMMCR_PWM_ENABLE 0x1
+
+/**
+ * struct spear_pwm_chip - struct representing pwm chip
+ *
+ * @mmio_base: base address of pwm chip
+ * @clk: pointer to clk structure of pwm chip
+ * @chip: linux pwm chip representation
+ * @dev: pointer to device structure of pwm chip
+ */
+struct spear_pwm_chip {
+ void __iomem *mmio_base;
+ struct clk *clk;
+ struct pwm_chip chip;
+ struct device *dev;
+};
+
+static inline struct spear_pwm_chip *to_spear_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct spear_pwm_chip, chip);
+}
+
+static inline u32 spear_pwm_readl(struct spear_pwm_chip *chip, unsigned int num,
+ unsigned long offset)
+{
+ return readl_relaxed(chip->mmio_base + (num << 4) + offset);
+}
+
+static inline void spear_pwm_writel(struct spear_pwm_chip *chip,
+ unsigned int num, unsigned long offset,
+ unsigned long val)
+{
+ writel_relaxed(val, chip->mmio_base + (num << 4) + offset);
+}
+
+static int spear_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
+ u64 val, div, clk_rate;
+ unsigned long prescale = PWMCR_MIN_PRESCALE, pv, dc;
+ int ret;
+
+ /*
+ * Find pv, dc and prescale to suit duty_ns and period_ns. This is done
+ * according to formulas described below:
+ *
+ * period_ns = 10^9 * (PRESCALE + 1) * PV / PWM_CLK_RATE
+ * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ *
+ * PV = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
+ * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
+ */
+ clk_rate = clk_get_rate(pc->clk);
+ while (1) {
+ div = 1000000000;
+ div *= 1 + prescale;
+ val = clk_rate * period_ns;
+ pv = div64_u64(val, div);
+ val = clk_rate * duty_ns;
+ dc = div64_u64(val, div);
+
+ /* if duty_ns and period_ns are not achievable then return */
+ if (pv < PWMPCR_MIN_PERIOD || dc < PWMDCR_MIN_DUTY)
+ return -EINVAL;
+
+ /*
+ * if pv and dc have crossed their upper limit, then increase
+ * prescale and recalculate pv and dc.
+ */
+ if (pv > PWMPCR_MAX_PERIOD || dc > PWMDCR_MAX_DUTY) {
+ if (++prescale > PWMCR_MAX_PRESCALE)
+ return -EINVAL;
+ continue;
+ }
+ break;
+ }
+
+ /*
+ * NOTE: the clock to PWM has to be enabled first before writing to the
+ * registers.
+ */
+ ret = clk_enable(pc->clk);
+ if (ret)
+ return ret;
+
+ spear_pwm_writel(pc, pwm->hwpwm, PWMCR,
+ prescale << PWMCR_PRESCALE_SHIFT);
+ spear_pwm_writel(pc, pwm->hwpwm, PWMDCR, dc);
+ spear_pwm_writel(pc, pwm->hwpwm, PWMPCR, pv);
+ clk_disable(pc->clk);
+
+ return 0;
+}
+
+static int spear_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
+ int rc = 0;
+ u32 val;
+
+ rc = clk_enable(pc->clk);
+ if (!rc)
+ return rc;
+
+ val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
+ val |= PWMCR_PWM_ENABLE;
+ spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
+
+ return 0;
+}
+
+static void spear_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
+ u32 val;
+
+ val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
+ val &= ~PWMCR_PWM_ENABLE;
+ spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
+
+ clk_disable(pc->clk);
+}
+
+static const struct pwm_ops spear_pwm_ops = {
+ .config = spear_pwm_config,
+ .enable = spear_pwm_enable,
+ .disable = spear_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int spear_pwm_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct spear_pwm_chip *pc;
+ struct resource *r;
+ int ret;
+ u32 val;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no memory resources defined\n");
+ return -ENODEV;
+ }
+
+ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
+ if (!pc->mmio_base)
+ return -EADDRNOTAVAIL;
+
+ pc->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pc->clk))
+ return PTR_ERR(pc->clk);
+
+ pc->dev = &pdev->dev;
+ platform_set_drvdata(pdev, pc);
+
+ pc->chip.dev = &pdev->dev;
+ pc->chip.ops = &spear_pwm_ops;
+ pc->chip.base = -1;
+ pc->chip.npwm = NUM_PWM;
+
+ ret = clk_prepare(pc->clk);
+ if (!ret)
+ return ret;
+
+ if (of_device_is_compatible(np, "st,spear1340-pwm")) {
+ ret = clk_enable(pc->clk);
+ if (!ret) {
+ clk_unprepare(pc->clk);
+ return ret;
+ }
+ /*
+ * Following enables PWM chip, channels would still be
+ * enabled individually through their control register
+ */
+ val = readl_relaxed(pc->mmio_base + PWMMCR);
+ val |= PWMMCR_PWM_ENABLE;
+ writel_relaxed(val, pc->mmio_base + PWMMCR);
+
+ clk_disable(pc->clk);
+ }
+
+ ret = pwmchip_add(&pc->chip);
+ if (!ret) {
+ clk_unprepare(pc->clk);
+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+ }
+
+ return ret;
+}
+
+static int spear_pwm_remove(struct platform_device *pdev)
+{
+ struct spear_pwm_chip *pc = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < NUM_PWM; i++)
+ pwm_disable(&pc->chip.pwms[i]);
+
+ /* clk was prepared in probe, hence unprepare it here */
+ clk_unprepare(pc->clk);
+ return pwmchip_remove(&pc->chip);
+}
+
+static struct of_device_id spear_pwm_of_match[] = {
+ { .compatible = "st,spear320-pwm" },
+ { .compatible = "st,spear1340-pwm" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, spear_pwm_of_match);
+
+static struct platform_driver spear_pwm_driver = {
+ .driver = {
+ .name = "spear-pwm",
+ .of_match_table = spear_pwm_of_match,
+ },
+ .probe = spear_pwm_probe,
+ .remove = spear_pwm_remove,
+};
+
+module_platform_driver(spear_pwm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Shiraz Hashim <shiraz.hashim@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.com>");
+MODULE_ALIAS("platform:spear-pwm");
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index 87c091b245c..5cf016dd982 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -25,6 +25,10 @@
#include <linux/clk.h>
#include <linux/pm_runtime.h>
#include <linux/pwm.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+
+#include "pwm-tipwmss.h"
/* ECAP registers and bits definitions */
#define CAP1 0x08
@@ -184,12 +188,24 @@ static const struct pwm_ops ecap_pwm_ops = {
.owner = THIS_MODULE,
};
+static const struct of_device_id ecap_of_match[] = {
+ { .compatible = "ti,am33xx-ecap" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ecap_of_match);
+
static int ecap_pwm_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
struct clk *clk;
struct ecap_pwm_chip *pc;
+ u16 status;
+ struct pinctrl *pinctrl;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev, "unable to select pin group\n");
pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
if (!pc) {
@@ -211,6 +227,8 @@ static int ecap_pwm_probe(struct platform_device *pdev)
pc->chip.dev = &pdev->dev;
pc->chip.ops = &ecap_pwm_ops;
+ pc->chip.of_xlate = of_pwm_xlate_with_flags;
+ pc->chip.of_pwm_n_cells = 3;
pc->chip.base = -1;
pc->chip.npwm = 1;
@@ -231,14 +249,40 @@ static int ecap_pwm_probe(struct platform_device *pdev)
}
pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
+ status = pwmss_submodule_state_change(pdev->dev.parent,
+ PWMSS_ECAPCLK_EN);
+ if (!(status & PWMSS_ECAPCLK_EN_ACK)) {
+ dev_err(&pdev->dev, "PWMSS config space clock enable failed\n");
+ ret = -EINVAL;
+ goto pwmss_clk_failure;
+ }
+
+ pm_runtime_put_sync(&pdev->dev);
+
platform_set_drvdata(pdev, pc);
return 0;
+
+pwmss_clk_failure:
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pwmchip_remove(&pc->chip);
+ return ret;
}
static int ecap_pwm_remove(struct platform_device *pdev)
{
struct ecap_pwm_chip *pc = platform_get_drvdata(pdev);
+ pm_runtime_get_sync(&pdev->dev);
+ /*
+ * Due to hardware misbehaviour, acknowledge of the stop_req
+ * is missing. Hence checking of the status bit skipped.
+ */
+ pwmss_submodule_state_change(pdev->dev.parent, PWMSS_ECAPCLK_STOP_REQ);
+ pm_runtime_put_sync(&pdev->dev);
+
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return pwmchip_remove(&pc->chip);
@@ -246,7 +290,9 @@ static int ecap_pwm_remove(struct platform_device *pdev)
static struct platform_driver ecap_pwm_driver = {
.driver = {
- .name = "ecap",
+ .name = "ecap",
+ .owner = THIS_MODULE,
+ .of_match_table = ecap_of_match,
},
.probe = ecap_pwm_probe,
.remove = ecap_pwm_remove,
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index 9ffd389d0c8..72a6dd40c9e 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -25,6 +25,10 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+
+#include "pwm-tipwmss.h"
/* EHRPWM registers and bits definitions */
@@ -115,6 +119,7 @@ struct ehrpwm_pwm_chip {
void __iomem *mmio_base;
unsigned long period_cycles[NUM_PWM_CHANNEL];
enum pwm_polarity polarity[NUM_PWM_CHANNEL];
+ struct clk *tbclk;
};
static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
@@ -335,6 +340,9 @@ static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
/* Channels polarity can be configured from action qualifier module */
configure_polarity(pc, pwm->hwpwm);
+ /* Enable TBCLK before enabling PWM device */
+ clk_enable(pc->tbclk);
+
/* Enable time counter for free_run */
ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN);
return 0;
@@ -363,6 +371,9 @@ static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
+ /* Disabling TBCLK on PWM disable */
+ clk_disable(pc->tbclk);
+
/* Stop Time base counter */
ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_STOP_NEXT);
@@ -392,12 +403,24 @@ static const struct pwm_ops ehrpwm_pwm_ops = {
.owner = THIS_MODULE,
};
+static const struct of_device_id ehrpwm_of_match[] = {
+ { .compatible = "ti,am33xx-ehrpwm" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ehrpwm_of_match);
+
static int ehrpwm_pwm_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
struct clk *clk;
struct ehrpwm_pwm_chip *pc;
+ u16 status;
+ struct pinctrl *pinctrl;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev, "unable to select pin group\n");
pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
if (!pc) {
@@ -419,6 +442,8 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev)
pc->chip.dev = &pdev->dev;
pc->chip.ops = &ehrpwm_pwm_ops;
+ pc->chip.of_xlate = of_pwm_xlate_with_flags;
+ pc->chip.of_pwm_n_cells = 3;
pc->chip.base = -1;
pc->chip.npwm = NUM_PWM_CHANNEL;
@@ -432,6 +457,13 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev)
if (!pc->mmio_base)
return -EADDRNOTAVAIL;
+ /* Acquire tbclk for Time Base EHRPWM submodule */
+ pc->tbclk = devm_clk_get(&pdev->dev, "tbclk");
+ if (IS_ERR(pc->tbclk)) {
+ dev_err(&pdev->dev, "Failed to get tbclk\n");
+ return PTR_ERR(pc->tbclk);
+ }
+
ret = pwmchip_add(&pc->chip);
if (ret < 0) {
dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
@@ -439,14 +471,40 @@ static int ehrpwm_pwm_probe(struct platform_device *pdev)
}
pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
+ status = pwmss_submodule_state_change(pdev->dev.parent,
+ PWMSS_EPWMCLK_EN);
+ if (!(status & PWMSS_EPWMCLK_EN_ACK)) {
+ dev_err(&pdev->dev, "PWMSS config space clock enable failed\n");
+ ret = -EINVAL;
+ goto pwmss_clk_failure;
+ }
+
+ pm_runtime_put_sync(&pdev->dev);
+
platform_set_drvdata(pdev, pc);
return 0;
+
+pwmss_clk_failure:
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pwmchip_remove(&pc->chip);
+ return ret;
}
static int ehrpwm_pwm_remove(struct platform_device *pdev)
{
struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev);
+ pm_runtime_get_sync(&pdev->dev);
+ /*
+ * Due to hardware misbehaviour, acknowledge of the stop_req
+ * is missing. Hence checking of the status bit skipped.
+ */
+ pwmss_submodule_state_change(pdev->dev.parent, PWMSS_EPWMCLK_STOP_REQ);
+ pm_runtime_put_sync(&pdev->dev);
+
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return pwmchip_remove(&pc->chip);
@@ -454,7 +512,9 @@ static int ehrpwm_pwm_remove(struct platform_device *pdev)
static struct platform_driver ehrpwm_pwm_driver = {
.driver = {
- .name = "ehrpwm",
+ .name = "ehrpwm",
+ .owner = THIS_MODULE,
+ .of_match_table = ehrpwm_of_match,
},
.probe = ehrpwm_pwm_probe,
.remove = ehrpwm_pwm_remove,
diff --git a/drivers/pwm/pwm-tipwmss.c b/drivers/pwm/pwm-tipwmss.c
new file mode 100644
index 00000000000..3448a1c8859
--- /dev/null
+++ b/drivers/pwm/pwm-tipwmss.c
@@ -0,0 +1,139 @@
+/*
+ * TI PWM Subsystem driver
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/of_device.h>
+
+#include "pwm-tipwmss.h"
+
+#define PWMSS_CLKCONFIG 0x8 /* Clock gating reg */
+#define PWMSS_CLKSTATUS 0xc /* Clock gating status reg */
+
+struct pwmss_info {
+ void __iomem *mmio_base;
+ struct mutex pwmss_lock;
+ u16 pwmss_clkconfig;
+};
+
+u16 pwmss_submodule_state_change(struct device *dev, int set)
+{
+ struct pwmss_info *info = dev_get_drvdata(dev);
+ u16 val;
+
+ mutex_lock(&info->pwmss_lock);
+ val = readw(info->mmio_base + PWMSS_CLKCONFIG);
+ val |= set;
+ writew(val , info->mmio_base + PWMSS_CLKCONFIG);
+ mutex_unlock(&info->pwmss_lock);
+
+ return readw(info->mmio_base + PWMSS_CLKSTATUS);
+}
+EXPORT_SYMBOL(pwmss_submodule_state_change);
+
+static const struct of_device_id pwmss_of_match[] = {
+ { .compatible = "ti,am33xx-pwmss" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pwmss_of_match);
+
+static int pwmss_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct resource *r;
+ struct pwmss_info *info;
+ struct device_node *node = pdev->dev.of_node;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ mutex_init(&info->pwmss_lock);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ return -ENODEV;
+ }
+
+ info->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
+ if (!info->mmio_base)
+ return -EADDRNOTAVAIL;
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+ platform_set_drvdata(pdev, info);
+
+ /* Populate all the child nodes here... */
+ ret = of_platform_populate(node, NULL, NULL, &pdev->dev);
+ if (ret)
+ dev_err(&pdev->dev, "no child node found\n");
+
+ return ret;
+}
+
+static int pwmss_remove(struct platform_device *pdev)
+{
+ struct pwmss_info *info = platform_get_drvdata(pdev);
+
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ mutex_destroy(&info->pwmss_lock);
+ return 0;
+}
+
+static int pwmss_suspend(struct device *dev)
+{
+ struct pwmss_info *info = dev_get_drvdata(dev);
+
+ info->pwmss_clkconfig = readw(info->mmio_base + PWMSS_CLKCONFIG);
+ pm_runtime_put_sync(dev);
+ return 0;
+}
+
+static int pwmss_resume(struct device *dev)
+{
+ struct pwmss_info *info = dev_get_drvdata(dev);
+
+ pm_runtime_get_sync(dev);
+ writew(info->pwmss_clkconfig, info->mmio_base + PWMSS_CLKCONFIG);
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pwmss_pm_ops, pwmss_suspend, pwmss_resume);
+
+static struct platform_driver pwmss_driver = {
+ .driver = {
+ .name = "pwmss",
+ .owner = THIS_MODULE,
+ .pm = &pwmss_pm_ops,
+ .of_match_table = pwmss_of_match,
+ },
+ .probe = pwmss_probe,
+ .remove = pwmss_remove,
+};
+
+module_platform_driver(pwmss_driver);
+
+MODULE_DESCRIPTION("PWM Subsystem driver");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-tipwmss.h b/drivers/pwm/pwm-tipwmss.h
new file mode 100644
index 00000000000..11f76a1e266
--- /dev/null
+++ b/drivers/pwm/pwm-tipwmss.h
@@ -0,0 +1,39 @@
+/*
+ * TI PWM Subsystem driver
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __TIPWMSS_H
+#define __TIPWMSS_H
+
+#ifdef CONFIG_PWM_TIPWMSS
+/* PWM substem clock gating */
+#define PWMSS_ECAPCLK_EN BIT(0)
+#define PWMSS_ECAPCLK_STOP_REQ BIT(1)
+#define PWMSS_EPWMCLK_EN BIT(8)
+#define PWMSS_EPWMCLK_STOP_REQ BIT(9)
+
+#define PWMSS_ECAPCLK_EN_ACK BIT(0)
+#define PWMSS_EPWMCLK_EN_ACK BIT(8)
+
+extern u16 pwmss_submodule_state_change(struct device *dev, int set);
+#else
+static inline u16 pwmss_submodule_state_change(struct device *dev, int set)
+{
+ /* return success status value */
+ return 0xFFFF;
+}
+#endif
+#endif /* __TIPWMSS_H */
diff --git a/drivers/pwm/pwm-twl-led.c b/drivers/pwm/pwm-twl-led.c
new file mode 100644
index 00000000000..9dfa0f3eca3
--- /dev/null
+++ b/drivers/pwm/pwm-twl-led.c
@@ -0,0 +1,344 @@
+/*
+ * Driver for TWL4030/6030 Pulse Width Modulator used as LED driver
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This driver is a complete rewrite of the former pwm-twl6030.c authorded by:
+ * Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/i2c/twl.h>
+#include <linux/slab.h>
+
+/*
+ * This driver handles the PWM driven LED terminals of TWL4030 and TWL6030.
+ * To generate the signal on TWL4030:
+ * - LEDA uses PWMA
+ * - LEDB uses PWMB
+ * TWL6030 has one LED pin with dedicated LEDPWM
+ */
+
+#define TWL4030_LED_MAX 0x7f
+#define TWL6030_LED_MAX 0xff
+
+/* Registers, bits and macro for TWL4030 */
+#define TWL4030_LEDEN_REG 0x00
+#define TWL4030_PWMA_REG 0x01
+
+#define TWL4030_LEDXON (1 << 0)
+#define TWL4030_LEDXPWM (1 << 4)
+#define TWL4030_LED_PINS (TWL4030_LEDXON | TWL4030_LEDXPWM)
+#define TWL4030_LED_TOGGLE(led, x) ((x) << (led))
+
+/* Register, bits and macro for TWL6030 */
+#define TWL6030_LED_PWM_CTRL1 0xf4
+#define TWL6030_LED_PWM_CTRL2 0xf5
+
+#define TWL6040_LED_MODE_HW 0x00
+#define TWL6040_LED_MODE_ON 0x01
+#define TWL6040_LED_MODE_OFF 0x02
+#define TWL6040_LED_MODE_MASK 0x03
+
+struct twl_pwmled_chip {
+ struct pwm_chip chip;
+ struct mutex mutex;
+};
+
+static inline struct twl_pwmled_chip *to_twl(struct pwm_chip *chip)
+{
+ return container_of(chip, struct twl_pwmled_chip, chip);
+}
+
+static int twl4030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ int duty_cycle = DIV_ROUND_UP(duty_ns * TWL4030_LED_MAX, period_ns) + 1;
+ u8 pwm_config[2] = { 1, 0 };
+ int base, ret;
+
+ /*
+ * To configure the duty period:
+ * On-cycle is set to 1 (the minimum allowed value)
+ * The off time of 0 is not configurable, so the mapping is:
+ * 0 -> off cycle = 2,
+ * 1 -> off cycle = 2,
+ * 2 -> off cycle = 3,
+ * 126 - > off cycle 127,
+ * 127 - > off cycle 1
+ * When on cycle == off cycle the PWM will be always on
+ */
+ if (duty_cycle == 1)
+ duty_cycle = 2;
+ else if (duty_cycle > TWL4030_LED_MAX)
+ duty_cycle = 1;
+
+ base = pwm->hwpwm * 2 + TWL4030_PWMA_REG;
+
+ pwm_config[1] = duty_cycle;
+
+ ret = twl_i2c_write(TWL4030_MODULE_LED, pwm_config, base, 2);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
+
+ return ret;
+}
+
+static int twl4030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwmled_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
+ goto out;
+ }
+
+ val |= TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+ return ret;
+}
+
+static void twl4030_pwmled_disable(struct pwm_chip *chip,
+ struct pwm_device *pwm)
+{
+ struct twl_pwmled_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
+ goto out;
+ }
+
+ val &= ~TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+}
+
+static int twl6030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ int duty_cycle = (duty_ns * TWL6030_LED_MAX) / period_ns;
+ u8 on_time;
+ int ret;
+
+ on_time = duty_cycle & 0xff;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, on_time,
+ TWL6030_LED_PWM_CTRL1);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
+
+ return ret;
+}
+
+static int twl6030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwmled_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+ pwm->label);
+ goto out;
+ }
+
+ val &= ~TWL6040_LED_MODE_MASK;
+ val |= TWL6040_LED_MODE_ON;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+ return ret;
+}
+
+static void twl6030_pwmled_disable(struct pwm_chip *chip,
+ struct pwm_device *pwm)
+{
+ struct twl_pwmled_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+ pwm->label);
+ goto out;
+ }
+
+ val &= ~TWL6040_LED_MODE_MASK;
+ val |= TWL6040_LED_MODE_OFF;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+}
+
+static int twl6030_pwmled_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwmled_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+ pwm->label);
+ goto out;
+ }
+
+ val &= ~TWL6040_LED_MODE_MASK;
+ val |= TWL6040_LED_MODE_OFF;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+ return ret;
+}
+
+static void twl6030_pwmled_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwmled_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
+ pwm->label);
+ goto out;
+ }
+
+ val &= ~TWL6040_LED_MODE_MASK;
+ val |= TWL6040_LED_MODE_HW;
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+}
+
+static const struct pwm_ops twl4030_pwmled_ops = {
+ .enable = twl4030_pwmled_enable,
+ .disable = twl4030_pwmled_disable,
+ .config = twl4030_pwmled_config,
+};
+
+static const struct pwm_ops twl6030_pwmled_ops = {
+ .enable = twl6030_pwmled_enable,
+ .disable = twl6030_pwmled_disable,
+ .config = twl6030_pwmled_config,
+ .request = twl6030_pwmled_request,
+ .free = twl6030_pwmled_free,
+};
+
+static int twl_pwmled_probe(struct platform_device *pdev)
+{
+ struct twl_pwmled_chip *twl;
+ int ret;
+
+ twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
+ if (!twl)
+ return -ENOMEM;
+
+ if (twl_class_is_4030()) {
+ twl->chip.ops = &twl4030_pwmled_ops;
+ twl->chip.npwm = 2;
+ } else {
+ twl->chip.ops = &twl6030_pwmled_ops;
+ twl->chip.npwm = 1;
+ }
+
+ twl->chip.dev = &pdev->dev;
+ twl->chip.base = -1;
+
+ mutex_init(&twl->mutex);
+
+ ret = pwmchip_add(&twl->chip);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, twl);
+
+ return 0;
+}
+
+static int twl_pwmled_remove(struct platform_device *pdev)
+{
+ struct twl_pwmled_chip *twl = platform_get_drvdata(pdev);
+
+ return pwmchip_remove(&twl->chip);
+}
+
+#ifdef CONFIG_OF
+static struct of_device_id twl_pwmled_of_match[] = {
+ { .compatible = "ti,twl4030-pwmled" },
+ { .compatible = "ti,twl6030-pwmled" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, twl_pwmled_of_match);
+#endif
+
+static struct platform_driver twl_pwmled_driver = {
+ .driver = {
+ .name = "twl-pwmled",
+ .of_match_table = of_match_ptr(twl_pwmled_of_match),
+ },
+ .probe = twl_pwmled_probe,
+ .remove = twl_pwmled_remove,
+};
+module_platform_driver(twl_pwmled_driver);
+
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
+MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030 LED outputs");
+MODULE_ALIAS("platform:twl-pwmled");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-twl.c b/drivers/pwm/pwm-twl.c
new file mode 100644
index 00000000000..e65db95d5e5
--- /dev/null
+++ b/drivers/pwm/pwm-twl.c
@@ -0,0 +1,359 @@
+/*
+ * Driver for TWL4030/6030 Generic Pulse Width Modulator
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/i2c/twl.h>
+#include <linux/slab.h>
+
+/*
+ * This driver handles the PWMs of TWL4030 and TWL6030.
+ * The TRM names for the PWMs on TWL4030 are: PWM0, PWM1
+ * TWL6030 also have two PWMs named in the TRM as PWM1, PWM2
+ */
+
+#define TWL_PWM_MAX 0x7f
+
+/* Registers, bits and macro for TWL4030 */
+#define TWL4030_GPBR1_REG 0x0c
+#define TWL4030_PMBR1_REG 0x0d
+
+/* GPBR1 register bits */
+#define TWL4030_PWMXCLK_ENABLE (1 << 0)
+#define TWL4030_PWMX_ENABLE (1 << 2)
+#define TWL4030_PWMX_BITS (TWL4030_PWMX_ENABLE | TWL4030_PWMXCLK_ENABLE)
+#define TWL4030_PWM_TOGGLE(pwm, x) ((x) << (pwm))
+
+/* PMBR1 register bits */
+#define TWL4030_GPIO6_PWM0_MUTE_MASK (0x03 << 2)
+#define TWL4030_GPIO6_PWM0_MUTE_PWM0 (0x01 << 2)
+#define TWL4030_GPIO7_VIBRASYNC_PWM1_MASK (0x03 << 4)
+#define TWL4030_GPIO7_VIBRASYNC_PWM1_PWM1 (0x03 << 4)
+
+/* Register, bits and macro for TWL6030 */
+#define TWL6030_TOGGLE3_REG 0x92
+
+#define TWL6030_PWMXR (1 << 0)
+#define TWL6030_PWMXS (1 << 1)
+#define TWL6030_PWMXEN (1 << 2)
+#define TWL6030_PWM_TOGGLE(pwm, x) ((x) << (pwm * 3))
+
+struct twl_pwm_chip {
+ struct pwm_chip chip;
+ struct mutex mutex;
+ u8 twl6030_toggle3;
+ u8 twl4030_pwm_mux;
+};
+
+static inline struct twl_pwm_chip *to_twl(struct pwm_chip *chip)
+{
+ return container_of(chip, struct twl_pwm_chip, chip);
+}
+
+static int twl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ int duty_cycle = DIV_ROUND_UP(duty_ns * TWL_PWM_MAX, period_ns) + 1;
+ u8 pwm_config[2] = { 1, 0 };
+ int base, ret;
+
+ /*
+ * To configure the duty period:
+ * On-cycle is set to 1 (the minimum allowed value)
+ * The off time of 0 is not configurable, so the mapping is:
+ * 0 -> off cycle = 2,
+ * 1 -> off cycle = 2,
+ * 2 -> off cycle = 3,
+ * 126 - > off cycle 127,
+ * 127 - > off cycle 1
+ * When on cycle == off cycle the PWM will be always on
+ */
+ if (duty_cycle == 1)
+ duty_cycle = 2;
+ else if (duty_cycle > TWL_PWM_MAX)
+ duty_cycle = 1;
+
+ base = pwm->hwpwm * 3;
+
+ pwm_config[1] = duty_cycle;
+
+ ret = twl_i2c_write(TWL_MODULE_PWM, pwm_config, base, 2);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
+
+ return ret;
+}
+
+static int twl4030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwm_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_GPBR1_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read GPBR1\n", pwm->label);
+ goto out;
+ }
+
+ val |= TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMXCLK_ENABLE);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+ val |= TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMX_ENABLE);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+ return ret;
+}
+
+static void twl4030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwm_chip *twl = to_twl(chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_GPBR1_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read GPBR1\n", pwm->label);
+ goto out;
+ }
+
+ val &= ~TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMX_ENABLE);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+ val &= ~TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMXCLK_ENABLE);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+}
+
+static int twl4030_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwm_chip *twl = to_twl(chip);
+ int ret;
+ u8 val, mask, bits;
+
+ if (pwm->hwpwm == 1) {
+ mask = TWL4030_GPIO7_VIBRASYNC_PWM1_MASK;
+ bits = TWL4030_GPIO7_VIBRASYNC_PWM1_PWM1;
+ } else {
+ mask = TWL4030_GPIO6_PWM0_MUTE_MASK;
+ bits = TWL4030_GPIO6_PWM0_MUTE_PWM0;
+ }
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_PMBR1_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read PMBR1\n", pwm->label);
+ goto out;
+ }
+
+ /* Save the current MUX configuration for the PWM */
+ twl->twl4030_pwm_mux &= ~mask;
+ twl->twl4030_pwm_mux |= (val & mask);
+
+ /* Select PWM functionality */
+ val &= ~mask;
+ val |= bits;
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_PMBR1_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+ return ret;
+}
+
+static void twl4030_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwm_chip *twl = container_of(chip, struct twl_pwm_chip,
+ chip);
+ int ret;
+ u8 val, mask;
+
+ if (pwm->hwpwm == 1)
+ mask = TWL4030_GPIO7_VIBRASYNC_PWM1_MASK;
+ else
+ mask = TWL4030_GPIO6_PWM0_MUTE_MASK;
+
+ mutex_lock(&twl->mutex);
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_PMBR1_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read PMBR1\n", pwm->label);
+ goto out;
+ }
+
+ /* Restore the MUX configuration for the PWM */
+ val &= ~mask;
+ val |= (twl->twl4030_pwm_mux & mask);
+
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_PMBR1_REG);
+ if (ret < 0)
+ dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label);
+
+out:
+ mutex_unlock(&twl->mutex);
+}
+
+static int twl6030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwm_chip *twl = container_of(chip, struct twl_pwm_chip,
+ chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ val = twl->twl6030_toggle3;
+ val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN);
+ val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXR);
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
+ goto out;
+ }
+
+ twl->twl6030_toggle3 = val;
+out:
+ mutex_unlock(&twl->mutex);
+ return 0;
+}
+
+static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct twl_pwm_chip *twl = container_of(chip, struct twl_pwm_chip,
+ chip);
+ int ret;
+ u8 val;
+
+ mutex_lock(&twl->mutex);
+ val = twl->twl6030_toggle3;
+ val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXR);
+ val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN);
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to read TOGGLE3\n", pwm->label);
+ goto out;
+ }
+
+ val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN);
+
+ ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
+ if (ret < 0) {
+ dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
+ goto out;
+ }
+
+ twl->twl6030_toggle3 = val;
+out:
+ mutex_unlock(&twl->mutex);
+}
+
+static const struct pwm_ops twl4030_pwm_ops = {
+ .config = twl_pwm_config,
+ .enable = twl4030_pwm_enable,
+ .disable = twl4030_pwm_disable,
+ .request = twl4030_pwm_request,
+ .free = twl4030_pwm_free,
+};
+
+static const struct pwm_ops twl6030_pwm_ops = {
+ .config = twl_pwm_config,
+ .enable = twl6030_pwm_enable,
+ .disable = twl6030_pwm_disable,
+};
+
+static int twl_pwm_probe(struct platform_device *pdev)
+{
+ struct twl_pwm_chip *twl;
+ int ret;
+
+ twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
+ if (!twl)
+ return -ENOMEM;
+
+ if (twl_class_is_4030())
+ twl->chip.ops = &twl4030_pwm_ops;
+ else
+ twl->chip.ops = &twl6030_pwm_ops;
+
+ twl->chip.dev = &pdev->dev;
+ twl->chip.base = -1;
+ twl->chip.npwm = 2;
+
+ mutex_init(&twl->mutex);
+
+ ret = pwmchip_add(&twl->chip);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, twl);
+
+ return 0;
+}
+
+static int twl_pwm_remove(struct platform_device *pdev)
+{
+ struct twl_pwm_chip *twl = platform_get_drvdata(pdev);
+
+ return pwmchip_remove(&twl->chip);
+}
+
+#ifdef CONFIG_OF
+static struct of_device_id twl_pwm_of_match[] = {
+ { .compatible = "ti,twl4030-pwm" },
+ { .compatible = "ti,twl6030-pwm" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, twl_pwm_of_match);
+#endif
+
+static struct platform_driver twl_pwm_driver = {
+ .driver = {
+ .name = "twl-pwm",
+ .of_match_table = of_match_ptr(twl_pwm_of_match),
+ },
+ .probe = twl_pwm_probe,
+ .remove = twl_pwm_remove,
+};
+module_platform_driver(twl_pwm_driver);
+
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
+MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030");
+MODULE_ALIAS("platform:twl-pwm");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-twl6030.c b/drivers/pwm/pwm-twl6030.c
deleted file mode 100644
index 378a7e28636..00000000000
--- a/drivers/pwm/pwm-twl6030.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * twl6030_pwm.c
- * Driver for PHOENIX (TWL6030) Pulse Width Modulator
- *
- * Copyright (C) 2010 Texas Instruments
- * Author: Hemanth V <hemanthv@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/i2c/twl.h>
-#include <linux/slab.h>
-
-#define LED_PWM_CTRL1 0xF4
-#define LED_PWM_CTRL2 0xF5
-
-/* Max value for CTRL1 register */
-#define PWM_CTRL1_MAX 255
-
-/* Pull down disable */
-#define PWM_CTRL2_DIS_PD (1 << 6)
-
-/* Current control 2.5 milli Amps */
-#define PWM_CTRL2_CURR_02 (2 << 4)
-
-/* LED supply source */
-#define PWM_CTRL2_SRC_VAC (1 << 2)
-
-/* LED modes */
-#define PWM_CTRL2_MODE_HW (0 << 0)
-#define PWM_CTRL2_MODE_SW (1 << 0)
-#define PWM_CTRL2_MODE_DIS (2 << 0)
-
-#define PWM_CTRL2_MODE_MASK 0x3
-
-struct twl6030_pwm_chip {
- struct pwm_chip chip;
-};
-
-static int twl6030_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- int ret;
- u8 val;
-
- /* Configure PWM */
- val = PWM_CTRL2_DIS_PD | PWM_CTRL2_CURR_02 | PWM_CTRL2_SRC_VAC |
- PWM_CTRL2_MODE_HW;
-
- ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
- if (ret < 0) {
- dev_err(chip->dev, "%s: Failed to configure PWM, Error %d\n",
- pwm->label, ret);
- return ret;
- }
-
- return 0;
-}
-
-static int twl6030_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
- int duty_ns, int period_ns)
-{
- u8 duty_cycle = (duty_ns * PWM_CTRL1_MAX) / period_ns;
- int ret;
-
- ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, duty_cycle, LED_PWM_CTRL1);
- if (ret < 0) {
- pr_err("%s: Failed to configure PWM, Error %d\n",
- pwm->label, ret);
- return ret;
- }
-
- return 0;
-}
-
-static int twl6030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- int ret;
- u8 val;
-
- ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
- if (ret < 0) {
- dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
- pwm->label, ret);
- return ret;
- }
-
- /* Change mode to software control */
- val &= ~PWM_CTRL2_MODE_MASK;
- val |= PWM_CTRL2_MODE_SW;
-
- ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
- if (ret < 0) {
- dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
- pwm->label, ret);
- return ret;
- }
-
- twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
- return 0;
-}
-
-static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
- int ret;
- u8 val;
-
- ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, LED_PWM_CTRL2);
- if (ret < 0) {
- dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
- pwm->label, ret);
- return;
- }
-
- val &= ~PWM_CTRL2_MODE_MASK;
- val |= PWM_CTRL2_MODE_HW;
-
- ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, LED_PWM_CTRL2);
- if (ret < 0) {
- dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
- pwm->label, ret);
- }
-}
-
-static const struct pwm_ops twl6030_pwm_ops = {
- .request = twl6030_pwm_request,
- .config = twl6030_pwm_config,
- .enable = twl6030_pwm_enable,
- .disable = twl6030_pwm_disable,
-};
-
-static int twl6030_pwm_probe(struct platform_device *pdev)
-{
- struct twl6030_pwm_chip *twl6030;
- int ret;
-
- twl6030 = devm_kzalloc(&pdev->dev, sizeof(*twl6030), GFP_KERNEL);
- if (!twl6030)
- return -ENOMEM;
-
- twl6030->chip.dev = &pdev->dev;
- twl6030->chip.ops = &twl6030_pwm_ops;
- twl6030->chip.base = -1;
- twl6030->chip.npwm = 1;
-
- ret = pwmchip_add(&twl6030->chip);
- if (ret < 0)
- return ret;
-
- platform_set_drvdata(pdev, twl6030);
-
- return 0;
-}
-
-static int twl6030_pwm_remove(struct platform_device *pdev)
-{
- struct twl6030_pwm_chip *twl6030 = platform_get_drvdata(pdev);
-
- return pwmchip_remove(&twl6030->chip);
-}
-
-static struct platform_driver twl6030_pwm_driver = {
- .driver = {
- .name = "twl6030-pwm",
- },
- .probe = twl6030_pwm_probe,
- .remove = twl6030_pwm_remove,
-};
-module_platform_driver(twl6030_pwm_driver);
-
-MODULE_ALIAS("platform:twl6030-pwm");
-MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c
index ad14389b714..b0ba2d40343 100644
--- a/drivers/pwm/pwm-vt8500.c
+++ b/drivers/pwm/pwm-vt8500.c
@@ -1,7 +1,8 @@
/*
* drivers/pwm/pwm-vt8500.c
*
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -21,14 +22,24 @@
#include <linux/io.h>
#include <linux/pwm.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <asm/div64.h>
-#define VT8500_NR_PWMS 4
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+/*
+ * SoC architecture allocates register space for 4 PWMs but only
+ * 2 are currently implemented.
+ */
+#define VT8500_NR_PWMS 2
struct vt8500_chip {
struct pwm_chip chip;
void __iomem *base;
+ struct clk *clk;
};
#define to_vt8500_chip(chip) container_of(chip, struct vt8500_chip, chip)
@@ -51,8 +62,15 @@ static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
unsigned long long c;
unsigned long period_cycles, prescale, pv, dc;
+ int err;
- c = 25000000/2; /* wild guess --- need to implement clocks */
+ err = clk_enable(vt8500->clk);
+ if (err < 0) {
+ dev_err(chip->dev, "failed to enable clock\n");
+ return err;
+ }
+
+ c = clk_get_rate(vt8500->clk);
c = c * period_ns;
do_div(c, 1000000000);
period_cycles = c;
@@ -64,8 +82,10 @@ static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
if (pv > 4095)
pv = 4095;
- if (prescale > 1023)
+ if (prescale > 1023) {
+ clk_disable(vt8500->clk);
return -EINVAL;
+ }
c = (unsigned long long)pv * duty_ns;
do_div(c, period_ns);
@@ -80,13 +100,21 @@ static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 3));
writel(dc, vt8500->base + 0xc + (pwm->hwpwm << 4));
+ clk_disable(vt8500->clk);
return 0;
}
static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
+ int err;
struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+ err = clk_enable(vt8500->clk);
+ if (err < 0) {
+ dev_err(chip->dev, "failed to enable clock\n");
+ return err;
+ }
+
pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
writel(5, vt8500->base + (pwm->hwpwm << 4));
return 0;
@@ -98,6 +126,8 @@ static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
writel(0, vt8500->base + (pwm->hwpwm << 4));
+
+ clk_disable(vt8500->clk);
}
static struct pwm_ops vt8500_pwm_ops = {
@@ -107,12 +137,24 @@ static struct pwm_ops vt8500_pwm_ops = {
.owner = THIS_MODULE,
};
-static int __devinit pwm_probe(struct platform_device *pdev)
+static const struct of_device_id vt8500_pwm_dt_ids[] = {
+ { .compatible = "via,vt8500-pwm", },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);
+
+static int vt8500_pwm_probe(struct platform_device *pdev)
{
struct vt8500_chip *chip;
struct resource *r;
+ struct device_node *np = pdev->dev.of_node;
int ret;
+ if (!np) {
+ dev_err(&pdev->dev, "invalid devicetree node\n");
+ return -EINVAL;
+ }
+
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
if (chip == NULL) {
dev_err(&pdev->dev, "failed to allocate memory\n");
@@ -124,6 +166,12 @@ static int __devinit pwm_probe(struct platform_device *pdev)
chip->chip.base = -1;
chip->chip.npwm = VT8500_NR_PWMS;
+ chip->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(chip->clk)) {
+ dev_err(&pdev->dev, "clock source not specified\n");
+ return PTR_ERR(chip->clk);
+ }
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&pdev->dev, "no memory resource defined\n");
@@ -131,18 +179,26 @@ static int __devinit pwm_probe(struct platform_device *pdev)
}
chip->base = devm_request_and_ioremap(&pdev->dev, r);
- if (chip->base == NULL)
+ if (!chip->base)
return -EADDRNOTAVAIL;
+ ret = clk_prepare(chip->clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to prepare clock\n");
+ return ret;
+ }
+
ret = pwmchip_add(&chip->chip);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add PWM chip\n");
return ret;
+ }
platform_set_drvdata(pdev, chip);
return ret;
}
-static int __devexit pwm_remove(struct platform_device *pdev)
+static int vt8500_pwm_remove(struct platform_device *pdev)
{
struct vt8500_chip *chip;
@@ -150,28 +206,22 @@ static int __devexit pwm_remove(struct platform_device *pdev)
if (chip == NULL)
return -ENODEV;
+ clk_unprepare(chip->clk);
+
return pwmchip_remove(&chip->chip);
}
-static struct platform_driver pwm_driver = {
+static struct platform_driver vt8500_pwm_driver = {
+ .probe = vt8500_pwm_probe,
+ .remove = vt8500_pwm_remove,
.driver = {
.name = "vt8500-pwm",
.owner = THIS_MODULE,
+ .of_match_table = vt8500_pwm_dt_ids,
},
- .probe = pwm_probe,
- .remove = __devexit_p(pwm_remove),
};
+module_platform_driver(vt8500_pwm_driver);
-static int __init pwm_init(void)
-{
- return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
- platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VT8500 PWM Driver");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 21:04:49 +0000