diff options
Diffstat (limited to 'drivers/regulator/core.c')
| -rw-r--r-- | drivers/regulator/core.c | 412 |
1 files changed, 265 insertions, 147 deletions
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 09a737c868b..2e31dffbefe 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -23,6 +23,7 @@ #include <linux/mutex.h> #include <linux/suspend.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/of.h> #include <linux/regmap.h> #include <linux/regulator/of_regulator.h> @@ -108,28 +109,6 @@ static const char *rdev_get_name(struct regulator_dev *rdev) return ""; } -/* gets the regulator for a given consumer device */ -static struct regulator *get_device_regulator(struct device *dev) -{ - struct regulator *regulator = NULL; - struct regulator_dev *rdev; - - mutex_lock(®ulator_list_mutex); - list_for_each_entry(rdev, ®ulator_list, list) { - mutex_lock(&rdev->mutex); - list_for_each_entry(regulator, &rdev->consumer_list, list) { - if (regulator->dev == dev) { - mutex_unlock(&rdev->mutex); - mutex_unlock(®ulator_list_mutex); - return regulator; - } - } - mutex_unlock(&rdev->mutex); - } - mutex_unlock(®ulator_list_mutex); - return NULL; -} - /** * of_get_regulator - get a regulator device node based on supply name * @dev: Device pointer for the consumer (of regulator) device @@ -303,18 +282,6 @@ static int regulator_check_drms(struct regulator_dev *rdev) return 0; } -static ssize_t device_requested_uA_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct regulator *regulator; - - regulator = get_device_regulator(dev); - if (regulator == NULL) - return 0; - - return sprintf(buf, "%d\n", regulator->uA_load); -} - static ssize_t regulator_uV_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -427,6 +394,9 @@ static ssize_t regulator_status_show(struct device *dev, case REGULATOR_STATUS_STANDBY: label = "standby"; break; + case REGULATOR_STATUS_UNDEFINED: + label = "undefined"; + break; default: return -ERANGE; } @@ -967,6 +937,14 @@ static int set_machine_constraints(struct regulator_dev *rdev, } } + if (rdev->constraints->ramp_delay && ops->set_ramp_delay) { + ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay); + if (ret < 0) { + rdev_err(rdev, "failed to set ramp_delay\n"); + goto out; + } + } + print_constraints(rdev); return 0; out: @@ -1097,48 +1075,29 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, list_add(®ulator->list, &rdev->consumer_list); if (dev) { - /* create a 'requested_microamps_name' sysfs entry */ - size = scnprintf(buf, REG_STR_SIZE, - "microamps_requested_%s-%s", - dev_name(dev), supply_name); - if (size >= REG_STR_SIZE) - goto overflow_err; - regulator->dev = dev; - sysfs_attr_init(®ulator->dev_attr.attr); - regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL); - if (regulator->dev_attr.attr.name == NULL) - goto attr_name_err; - - regulator->dev_attr.attr.mode = 0444; - regulator->dev_attr.show = device_requested_uA_show; - err = device_create_file(dev, ®ulator->dev_attr); - if (err < 0) { - rdev_warn(rdev, "could not add regulator_dev requested microamps sysfs entry\n"); - goto attr_name_err; - } - /* also add a link to the device sysfs entry */ + /* Add a link to the device sysfs entry */ size = scnprintf(buf, REG_STR_SIZE, "%s-%s", dev->kobj.name, supply_name); if (size >= REG_STR_SIZE) - goto attr_err; + goto overflow_err; regulator->supply_name = kstrdup(buf, GFP_KERNEL); if (regulator->supply_name == NULL) - goto attr_err; + goto overflow_err; err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj, buf); if (err) { rdev_warn(rdev, "could not add device link %s err %d\n", dev->kobj.name, err); - goto link_name_err; + /* non-fatal */ } } else { regulator->supply_name = kstrdup(supply_name, GFP_KERNEL); if (regulator->supply_name == NULL) - goto attr_err; + goto overflow_err; } regulator->debugfs = debugfs_create_dir(regulator->supply_name, @@ -1165,12 +1124,6 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, mutex_unlock(&rdev->mutex); return regulator; -link_name_err: - kfree(regulator->supply_name); -attr_err: - device_remove_file(regulator->dev, ®ulator->dev_attr); -attr_name_err: - kfree(regulator->dev_attr.attr.name); overflow_err: list_del(®ulator->list); kfree(regulator); @@ -1181,7 +1134,7 @@ overflow_err: static int _regulator_get_enable_time(struct regulator_dev *rdev) { if (!rdev->desc->ops->enable_time) - return 0; + return rdev->desc->enable_time; return rdev->desc->ops->enable_time(rdev); } @@ -1420,11 +1373,8 @@ void regulator_put(struct regulator *regulator) debugfs_remove_recursive(regulator->debugfs); /* remove any sysfs entries */ - if (regulator->dev) { + if (regulator->dev) sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name); - device_remove_file(regulator->dev, ®ulator->dev_attr); - kfree(regulator->dev_attr.attr.name); - } kfree(regulator->supply_name); list_del(®ulator->list); kfree(regulator); @@ -1459,19 +1409,61 @@ void devm_regulator_put(struct regulator *regulator) { int rc; - rc = devres_destroy(regulator->dev, devm_regulator_release, + rc = devres_release(regulator->dev, devm_regulator_release, devm_regulator_match, regulator); - if (rc == 0) - regulator_put(regulator); - else + if (rc != 0) WARN_ON(rc); } EXPORT_SYMBOL_GPL(devm_regulator_put); +static int _regulator_do_enable(struct regulator_dev *rdev) +{ + int ret, delay; + + /* Query before enabling in case configuration dependent. */ + ret = _regulator_get_enable_time(rdev); + if (ret >= 0) { + delay = ret; + } else { + rdev_warn(rdev, "enable_time() failed: %d\n", ret); + delay = 0; + } + + trace_regulator_enable(rdev_get_name(rdev)); + + if (rdev->ena_gpio) { + gpio_set_value_cansleep(rdev->ena_gpio, + !rdev->ena_gpio_invert); + rdev->ena_gpio_state = 1; + } else if (rdev->desc->ops->enable) { + ret = rdev->desc->ops->enable(rdev); + if (ret < 0) + return ret; + } else { + return -EINVAL; + } + + /* Allow the regulator to ramp; it would be useful to extend + * this for bulk operations so that the regulators can ramp + * together. */ + trace_regulator_enable_delay(rdev_get_name(rdev)); + + if (delay >= 1000) { + mdelay(delay / 1000); + udelay(delay % 1000); + } else if (delay) { + udelay(delay); + } + + trace_regulator_enable_complete(rdev_get_name(rdev)); + + return 0; +} + /* locks held by regulator_enable() */ static int _regulator_enable(struct regulator_dev *rdev) { - int ret, delay; + int ret; /* check voltage and requested load before enabling */ if (rdev->constraints && @@ -1485,40 +1477,10 @@ static int _regulator_enable(struct regulator_dev *rdev) if (!_regulator_can_change_status(rdev)) return -EPERM; - if (!rdev->desc->ops->enable) - return -EINVAL; - - /* Query before enabling in case configuration - * dependent. */ - ret = _regulator_get_enable_time(rdev); - if (ret >= 0) { - delay = ret; - } else { - rdev_warn(rdev, "enable_time() failed: %d\n", - ret); - delay = 0; - } - - trace_regulator_enable(rdev_get_name(rdev)); - - /* Allow the regulator to ramp; it would be useful - * to extend this for bulk operations so that the - * regulators can ramp together. */ - ret = rdev->desc->ops->enable(rdev); + ret = _regulator_do_enable(rdev); if (ret < 0) return ret; - trace_regulator_enable_delay(rdev_get_name(rdev)); - - if (delay >= 1000) { - mdelay(delay / 1000); - udelay(delay % 1000); - } else if (delay) { - udelay(delay); - } - - trace_regulator_enable_complete(rdev_get_name(rdev)); - } else if (ret < 0) { rdev_err(rdev, "is_enabled() failed: %d\n", ret); return ret; @@ -1567,6 +1529,30 @@ int regulator_enable(struct regulator *regulator) } EXPORT_SYMBOL_GPL(regulator_enable); +static int _regulator_do_disable(struct regulator_dev *rdev) +{ + int ret; + + trace_regulator_disable(rdev_get_name(rdev)); + + if (rdev->ena_gpio) { + gpio_set_value_cansleep(rdev->ena_gpio, + rdev->ena_gpio_invert); + rdev->ena_gpio_state = 0; + + } else if (rdev->desc->ops->disable) { + ret = rdev->desc->ops->disable(rdev); + if (ret != 0) + return ret; + } + + trace_regulator_disable_complete(rdev_get_name(rdev)); + + _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, + NULL); + return 0; +} + /* locks held by regulator_disable() */ static int _regulator_disable(struct regulator_dev *rdev) { @@ -1581,20 +1567,12 @@ static int _regulator_disable(struct regulator_dev *rdev) (rdev->constraints && !rdev->constraints->always_on)) { /* we are last user */ - if (_regulator_can_change_status(rdev) && - rdev->desc->ops->disable) { - trace_regulator_disable(rdev_get_name(rdev)); - - ret = rdev->desc->ops->disable(rdev); + if (_regulator_can_change_status(rdev)) { + ret = _regulator_do_disable(rdev); if (ret < 0) { rdev_err(rdev, "failed to disable\n"); return ret; } - - trace_regulator_disable_complete(rdev_get_name(rdev)); - - _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, - NULL); } rdev->use_count = 0; @@ -1812,6 +1790,10 @@ EXPORT_SYMBOL_GPL(regulator_disable_regmap); static int _regulator_is_enabled(struct regulator_dev *rdev) { + /* A GPIO control always takes precedence */ + if (rdev->ena_gpio) + return rdev->ena_gpio_state; + /* If we don't know then assume that the regulator is always on */ if (!rdev->desc->ops->is_enabled) return 1; @@ -1883,6 +1865,31 @@ int regulator_list_voltage_linear(struct regulator_dev *rdev, EXPORT_SYMBOL_GPL(regulator_list_voltage_linear); /** + * regulator_list_voltage_table - List voltages with table based mapping + * + * @rdev: Regulator device + * @selector: Selector to convert into a voltage + * + * Regulators with table based mapping between voltages and + * selectors can set volt_table in the regulator descriptor + * and then use this function as their list_voltage() operation. + */ +int regulator_list_voltage_table(struct regulator_dev *rdev, + unsigned int selector) +{ + if (!rdev->desc->volt_table) { + BUG_ON(!rdev->desc->volt_table); + return -EINVAL; + } + + if (selector >= rdev->desc->n_voltages) + return -EINVAL; + + return rdev->desc->volt_table[selector]; +} +EXPORT_SYMBOL_GPL(regulator_list_voltage_table); + +/** * regulator_list_voltage - enumerate supported voltages * @regulator: regulator source * @selector: identify voltage to list @@ -1928,8 +1935,18 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage); int regulator_is_supported_voltage(struct regulator *regulator, int min_uV, int max_uV) { + struct regulator_dev *rdev = regulator->rdev; int i, voltages, ret; + /* If we can't change voltage check the current voltage */ + if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { + ret = regulator_get_voltage(regulator); + if (ret >= 0) + return (min_uV >= ret && ret <= max_uV); + else + return ret; + } + ret = regulator_count_voltages(regulator); if (ret < 0) return ret; @@ -2045,6 +2062,14 @@ int regulator_map_voltage_linear(struct regulator_dev *rdev, { int ret, voltage; + /* Allow uV_step to be 0 for fixed voltage */ + if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) { + if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV) + return 0; + else + return -EINVAL; + } + if (!rdev->desc->uV_step) { BUG_ON(!rdev->desc->uV_step); return -EINVAL; @@ -2071,7 +2096,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, { int ret; int delay = 0; - int best_val; + int best_val = 0; unsigned int selector; int old_selector = -1; @@ -2084,7 +2109,8 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, * If we can't obtain the old selector there is not enough * info to call set_voltage_time_sel(). */ - if (rdev->desc->ops->set_voltage_time_sel && + if (_regulator_is_enabled(rdev) && + rdev->desc->ops->set_voltage_time_sel && rdev->desc->ops->get_voltage_sel) { old_selector = rdev->desc->ops->get_voltage_sel(rdev); if (old_selector < 0) @@ -2094,29 +2120,45 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, if (rdev->desc->ops->set_voltage) { ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV, &selector); + + if (ret >= 0) { + if (rdev->desc->ops->list_voltage) + best_val = rdev->desc->ops->list_voltage(rdev, + selector); + else + best_val = _regulator_get_voltage(rdev); + } + } else if (rdev->desc->ops->set_voltage_sel) { - if (rdev->desc->ops->map_voltage) + if (rdev->desc->ops->map_voltage) { ret = rdev->desc->ops->map_voltage(rdev, min_uV, max_uV); - else - ret = regulator_map_voltage_iterate(rdev, min_uV, - max_uV); + } else { + if (rdev->desc->ops->list_voltage == + regulator_list_voltage_linear) + ret = regulator_map_voltage_linear(rdev, + min_uV, max_uV); + else + ret = regulator_map_voltage_iterate(rdev, + min_uV, max_uV); + } if (ret >= 0) { - selector = ret; - ret = rdev->desc->ops->set_voltage_sel(rdev, ret); + best_val = rdev->desc->ops->list_voltage(rdev, ret); + if (min_uV <= best_val && max_uV >= best_val) { + selector = ret; + ret = rdev->desc->ops->set_voltage_sel(rdev, + ret); + } else { + ret = -EINVAL; + } } } else { ret = -EINVAL; } - if (rdev->desc->ops->list_voltage) - best_val = rdev->desc->ops->list_voltage(rdev, selector); - else - best_val = -1; - /* Call set_voltage_time_sel if successfully obtained old_selector */ - if (ret == 0 && old_selector >= 0 && + if (ret == 0 && _regulator_is_enabled(rdev) && old_selector >= 0 && rdev->desc->ops->set_voltage_time_sel) { delay = rdev->desc->ops->set_voltage_time_sel(rdev, @@ -2126,19 +2168,19 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, delay); delay = 0; } - } - /* Insert any necessary delays */ - if (delay >= 1000) { - mdelay(delay / 1000); - udelay(delay % 1000); - } else if (delay) { - udelay(delay); + /* Insert any necessary delays */ + if (delay >= 1000) { + mdelay(delay / 1000); + udelay(delay % 1000); + } else if (delay) { + udelay(delay); + } } - if (ret == 0) + if (ret == 0 && best_val >= 0) _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, - NULL); + (void *)best_val); trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val); @@ -2249,6 +2291,46 @@ int regulator_set_voltage_time(struct regulator *regulator, EXPORT_SYMBOL_GPL(regulator_set_voltage_time); /** + *regulator_set_voltage_time_sel - get raise/fall time + * @regulator: regulator source + * @old_selector: selector for starting voltage + * @new_selector: selector for target voltage + * + * Provided with the starting and target voltage selectors, this function + * returns time in microseconds required to rise or fall to this new voltage + * + * Drivers providing ramp_delay in regulation_constraints can use this as their + * set_voltage_time_sel() operation. + */ +int regulator_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector) +{ + unsigned int ramp_delay = 0; + int old_volt, new_volt; + + if (rdev->constraints->ramp_delay) + ramp_delay = rdev->constraints->ramp_delay; + else if (rdev->desc->ramp_delay) + ramp_delay = rdev->desc->ramp_delay; + + if (ramp_delay == 0) { + rdev_warn(rdev, "ramp_delay not set\n"); + return 0; + } + + /* sanity check */ + if (!rdev->desc->ops->list_voltage) + return -EINVAL; + + old_volt = rdev->desc->ops->list_voltage(rdev, old_selector); + new_volt = rdev->desc->ops->list_voltage(rdev, new_selector); + + return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay); +} +EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel); + +/** * regulator_sync_voltage - re-apply last regulator output voltage * @regulator: regulator source * @@ -2519,9 +2601,12 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) { struct regulator_dev *rdev = regulator->rdev; struct regulator *consumer; - int ret, output_uV, input_uV, total_uA_load = 0; + int ret, output_uV, input_uV = 0, total_uA_load = 0; unsigned int mode; + if (rdev->supply) + input_uV = regulator_get_voltage(rdev->supply); + mutex_lock(&rdev->mutex); /* @@ -2554,10 +2639,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) goto out; } - /* get input voltage */ - input_uV = 0; - if (rdev->supply) - input_uV = regulator_get_voltage(rdev->supply); + /* No supply? Use constraint voltage */ if (input_uV <= 0) input_uV = rdev->constraints->input_uV; if (input_uV <= 0) { @@ -2628,7 +2710,7 @@ static void _notifier_call_chain(struct regulator_dev *rdev, unsigned long event, void *data) { /* call rdev chain first */ - blocking_notifier_call_chain(&rdev->notifier, event, NULL); + blocking_notifier_call_chain(&rdev->notifier, event, data); } /** @@ -2909,10 +2991,10 @@ int regulator_mode_to_status(unsigned int mode) return REGULATOR_STATUS_NORMAL; case REGULATOR_MODE_IDLE: return REGULATOR_STATUS_IDLE; - case REGULATOR_STATUS_STANDBY: + case REGULATOR_MODE_STANDBY: return REGULATOR_STATUS_STANDBY; default: - return 0; + return REGULATOR_STATUS_UNDEFINED; } } EXPORT_SYMBOL_GPL(regulator_mode_to_status); @@ -3105,7 +3187,10 @@ regulator_register(const struct regulator_desc *regulator_desc, rdev->reg_data = config->driver_data; rdev->owner = regulator_desc->owner; rdev->desc = regulator_desc; - rdev->regmap = config->regmap; + if (config->regmap) + rdev->regmap = config->regmap; + else + rdev->regmap = dev_get_regmap(dev, NULL); INIT_LIST_HEAD(&rdev->consumer_list); INIT_LIST_HEAD(&rdev->list); BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); @@ -3132,6 +3217,26 @@ regulator_register(const struct regulator_desc *regulator_desc, dev_set_drvdata(&rdev->dev, rdev); + if (config->ena_gpio) { + ret = gpio_request_one(config->ena_gpio, + GPIOF_DIR_OUT | config->ena_gpio_flags, + rdev_get_name(rdev)); + if (ret != 0) { + rdev_err(rdev, "Failed to request enable GPIO%d: %d\n", + config->ena_gpio, ret); + goto clean; + } + + rdev->ena_gpio = config->ena_gpio; + rdev->ena_gpio_invert = config->ena_gpio_invert; + + if (config->ena_gpio_flags & GPIOF_OUT_INIT_HIGH) + rdev->ena_gpio_state = 1; + + if (rdev->ena_gpio_invert) + rdev->ena_gpio_state = !rdev->ena_gpio_state; + } + /* set regulator constraints */ if (init_data) constraints = &init_data->constraints; @@ -3200,6 +3305,8 @@ unset_supplies: scrub: if (rdev->supply) regulator_put(rdev->supply); + if (rdev->ena_gpio) + gpio_free(rdev->ena_gpio); kfree(rdev->constraints); device_unregister(&rdev->dev); /* device core frees rdev */ @@ -3233,6 +3340,8 @@ void regulator_unregister(struct regulator_dev *rdev) unset_regulator_supplies(rdev); list_del(&rdev->list); kfree(rdev->constraints); + if (rdev->ena_gpio) + gpio_free(rdev->ena_gpio); device_unregister(&rdev->dev); mutex_unlock(®ulator_list_mutex); } @@ -3472,6 +3581,15 @@ static int __init regulator_init_complete(void) struct regulation_constraints *c; int enabled, ret; + /* + * Since DT doesn't provide an idiomatic mechanism for + * enabling full constraints and since it's much more natural + * with DT to provide them just assume that a DT enabled + * system has full constraints. + */ + if (of_have_populated_dt()) + has_full_constraints = true; + mutex_lock(®ulator_list_mutex); /* If we have a full configuration then disable any regulators |