diff options
Diffstat (limited to 'drivers/regulator/da903x.c')
-rw-r--r-- | drivers/regulator/da903x.c | 209 |
1 files changed, 77 insertions, 132 deletions
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index 1851f0929ef..1005f5f7e60 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -76,9 +76,7 @@ struct da903x_regulator_info { struct regulator_desc desc; - int min_uV; int max_uV; - int step_uV; int vol_reg; int vol_shift; int vol_nbits; @@ -88,10 +86,6 @@ struct da903x_regulator_info { int enable_bit; }; -static int da9034_ldo12_data[] = { 1700, 1750, 1800, 1850, 1900, 1950, - 2000, 2050, 2700, 2750, 2800, 2850, - 2900, 2950, 3000, 3050 }; - static inline struct device *to_da903x_dev(struct regulator_dev *rdev) { return rdev_get_dev(rdev)->parent->parent; @@ -100,34 +94,26 @@ static inline struct device *to_da903x_dev(struct regulator_dev *rdev) static inline int check_range(struct da903x_regulator_info *info, int min_uV, int max_uV) { - if (min_uV < info->min_uV || min_uV > info->max_uV) + if (min_uV < info->desc.min_uV || min_uV > info->max_uV) return -EINVAL; return 0; } /* DA9030/DA9034 common operations */ -static int da903x_set_ldo_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV, unsigned *selector) +static int da903x_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); struct device *da9034_dev = to_da903x_dev(rdev); uint8_t val, mask; - if (check_range(info, min_uV, max_uV)) { - pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); - return -EINVAL; - } - - val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV); - *selector = val; - val <<= info->vol_shift; + val = selector << info->vol_shift; mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; return da903x_update(da9034_dev, info->vol_reg, val, mask); } -static int da903x_get_voltage(struct regulator_dev *rdev) +static int da903x_get_voltage_sel(struct regulator_dev *rdev) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); struct device *da9034_dev = to_da903x_dev(rdev); @@ -141,7 +127,7 @@ static int da903x_get_voltage(struct regulator_dev *rdev) mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; val = (val & mask) >> info->vol_shift; - return info->min_uV + info->step_uV * val; + return val; } static int da903x_enable(struct regulator_dev *rdev) @@ -176,35 +162,16 @@ static int da903x_is_enabled(struct regulator_dev *rdev) return !!(reg_val & (1 << info->enable_bit)); } -static int da903x_list_voltage(struct regulator_dev *rdev, unsigned selector) -{ - struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - int ret; - - ret = info->min_uV + info->step_uV * selector; - if (ret > info->max_uV) - return -EINVAL; - return ret; -} - /* DA9030 specific operations */ -static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV, - unsigned *selector) +static int da9030_set_ldo1_15_voltage_sel(struct regulator_dev *rdev, + unsigned selector) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); struct device *da903x_dev = to_da903x_dev(rdev); uint8_t val, mask; int ret; - if (check_range(info, min_uV, max_uV)) { - pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); - return -EINVAL; - } - - val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV); - *selector = val; - val <<= info->vol_shift; + val = selector << info->vol_shift; mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; val |= DA9030_LDO_UNLOCK; /* have to set UNLOCK bits */ mask |= DA9030_LDO_UNLOCK_MASK; @@ -217,73 +184,57 @@ static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev, return da903x_update(da903x_dev, info->vol_reg, val, mask); } -static int da9030_set_ldo14_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV, - unsigned *selector) +static int da9030_map_ldo14_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da903x_dev = to_da903x_dev(rdev); - uint8_t val, mask; - int thresh; + int thresh, sel; if (check_range(info, min_uV, max_uV)) { pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); return -EINVAL; } - thresh = (info->max_uV + info->min_uV) / 2; + thresh = (info->max_uV + info->desc.min_uV) / 2; if (min_uV < thresh) { - val = DIV_ROUND_UP(thresh - min_uV, info->step_uV); - val |= 0x4; + sel = DIV_ROUND_UP(thresh - min_uV, info->desc.uV_step); + sel |= 0x4; } else { - val = DIV_ROUND_UP(min_uV - thresh, info->step_uV); + sel = DIV_ROUND_UP(min_uV - thresh, info->desc.uV_step); } - *selector = val; - val <<= info->vol_shift; - mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; - - return da903x_update(da903x_dev, info->vol_reg, val, mask); + return sel; } -static int da9030_get_ldo14_voltage(struct regulator_dev *rdev) +static int da9030_list_ldo14_voltage(struct regulator_dev *rdev, + unsigned selector) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da903x_dev = to_da903x_dev(rdev); - uint8_t val, mask; - int ret; + int volt; - ret = da903x_read(da903x_dev, info->vol_reg, &val); - if (ret) - return ret; + if (selector & 0x4) + volt = rdev->desc->min_uV + + rdev->desc->uV_step * (3 - (selector & ~0x4)); + else + volt = (info->max_uV + rdev->desc->min_uV) / 2 + + rdev->desc->uV_step * (selector & ~0x4); - mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; - val = (val & mask) >> info->vol_shift; + if (volt > info->max_uV) + return -EINVAL; - if (val & 0x4) - return info->min_uV + info->step_uV * (3 - (val & ~0x4)); - else - return (info->max_uV + info->min_uV) / 2 + - info->step_uV * (val & ~0x4); + return volt; } /* DA9034 specific operations */ -static int da9034_set_dvc_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV, unsigned *selector) +static int da9034_set_dvc_voltage_sel(struct regulator_dev *rdev, + unsigned selector) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); struct device *da9034_dev = to_da903x_dev(rdev); uint8_t val, mask; int ret; - if (check_range(info, min_uV, max_uV)) { - pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); - return -EINVAL; - } - - val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV); - *selector = val; - val <<= info->vol_shift; + val = selector << info->vol_shift; mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; ret = da903x_update(da9034_dev, info->vol_reg, val, mask); @@ -295,59 +246,45 @@ static int da9034_set_dvc_voltage(struct regulator_dev *rdev, return ret; } -static int da9034_set_ldo12_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV, unsigned *selector) +static int da9034_map_ldo12_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = to_da903x_dev(rdev); - uint8_t val, mask; + int sel; if (check_range(info, min_uV, max_uV)) { pr_err("invalid voltage range (%d, %d) uV\n", min_uV, max_uV); return -EINVAL; } - val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV); - val = (val >= 20) ? val - 12 : ((val > 7) ? 8 : val); - *selector = val; - val <<= info->vol_shift; - mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + sel = DIV_ROUND_UP(min_uV - info->desc.min_uV, info->desc.uV_step); + sel = (sel >= 20) ? sel - 12 : ((sel > 7) ? 8 : sel); - return da903x_update(da9034_dev, info->vol_reg, val, mask); + return sel; } -static int da9034_get_ldo12_voltage(struct regulator_dev *rdev) +static int da9034_list_ldo12_voltage(struct regulator_dev *rdev, + unsigned selector) { struct da903x_regulator_info *info = rdev_get_drvdata(rdev); - struct device *da9034_dev = to_da903x_dev(rdev); - uint8_t val, mask; - int ret; - - ret = da903x_read(da9034_dev, info->vol_reg, &val); - if (ret) - return ret; - - mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; - val = (val & mask) >> info->vol_shift; + int volt; - if (val >= 8) - return 2700000 + info->step_uV * (val - 8); - - return info->min_uV + info->step_uV * val; -} + if (selector >= 8) + volt = 2700000 + rdev->desc->uV_step * (selector - 8); + else + volt = rdev->desc->min_uV + rdev->desc->uV_step * selector; -static int da9034_list_ldo12_voltage(struct regulator_dev *rdev, - unsigned selector) -{ - if (selector >= ARRAY_SIZE(da9034_ldo12_data)) + if (volt > info->max_uV) return -EINVAL; - return da9034_ldo12_data[selector] * 1000; + + return volt; } static struct regulator_ops da903x_regulator_ldo_ops = { - .set_voltage = da903x_set_ldo_voltage, - .get_voltage = da903x_get_voltage, - .list_voltage = da903x_list_voltage, + .set_voltage_sel = da903x_set_voltage_sel, + .get_voltage_sel = da903x_get_voltage_sel, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, .enable = da903x_enable, .disable = da903x_disable, .is_enabled = da903x_is_enabled, @@ -355,9 +292,10 @@ static struct regulator_ops da903x_regulator_ldo_ops = { /* NOTE: this is dedicated for the insane DA9030 LDO14 */ static struct regulator_ops da9030_regulator_ldo14_ops = { - .set_voltage = da9030_set_ldo14_voltage, - .get_voltage = da9030_get_ldo14_voltage, - .list_voltage = da903x_list_voltage, + .set_voltage_sel = da903x_set_voltage_sel, + .get_voltage_sel = da903x_get_voltage_sel, + .list_voltage = da9030_list_ldo14_voltage, + .map_voltage = da9030_map_ldo14_voltage, .enable = da903x_enable, .disable = da903x_disable, .is_enabled = da903x_is_enabled, @@ -365,18 +303,20 @@ static struct regulator_ops da9030_regulator_ldo14_ops = { /* NOTE: this is dedicated for the DA9030 LDO1 and LDO15 that have locks */ static struct regulator_ops da9030_regulator_ldo1_15_ops = { - .set_voltage = da9030_set_ldo1_15_voltage, - .get_voltage = da903x_get_voltage, - .list_voltage = da903x_list_voltage, + .set_voltage_sel = da9030_set_ldo1_15_voltage_sel, + .get_voltage_sel = da903x_get_voltage_sel, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, .enable = da903x_enable, .disable = da903x_disable, .is_enabled = da903x_is_enabled, }; static struct regulator_ops da9034_regulator_dvc_ops = { - .set_voltage = da9034_set_dvc_voltage, - .get_voltage = da903x_get_voltage, - .list_voltage = da903x_list_voltage, + .set_voltage_sel = da9034_set_dvc_voltage_sel, + .get_voltage_sel = da903x_get_voltage_sel, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, .enable = da903x_enable, .disable = da903x_disable, .is_enabled = da903x_is_enabled, @@ -384,9 +324,10 @@ static struct regulator_ops da9034_regulator_dvc_ops = { /* NOTE: this is dedicated for the insane LDO12 */ static struct regulator_ops da9034_regulator_ldo12_ops = { - .set_voltage = da9034_set_ldo12_voltage, - .get_voltage = da9034_get_ldo12_voltage, + .set_voltage_sel = da903x_set_voltage_sel, + .get_voltage_sel = da903x_get_voltage_sel, .list_voltage = da9034_list_ldo12_voltage, + .map_voltage = da9034_map_ldo12_voltage, .enable = da903x_enable, .disable = da903x_disable, .is_enabled = da903x_is_enabled, @@ -401,10 +342,10 @@ static struct regulator_ops da9034_regulator_ldo12_ops = { .id = _pmic##_ID_LDO##_id, \ .n_voltages = (step) ? ((max - min) / step + 1) : 1, \ .owner = THIS_MODULE, \ + .min_uV = (min) * 1000, \ + .uV_step = (step) * 1000, \ }, \ - .min_uV = (min) * 1000, \ .max_uV = (max) * 1000, \ - .step_uV = (step) * 1000, \ .vol_reg = _pmic##_##vreg, \ .vol_shift = (shift), \ .vol_nbits = (nbits), \ @@ -421,10 +362,10 @@ static struct regulator_ops da9034_regulator_ldo12_ops = { .id = _pmic##_ID_##_id, \ .n_voltages = (step) ? ((max - min) / step + 1) : 1, \ .owner = THIS_MODULE, \ + .min_uV = (min) * 1000, \ + .uV_step = (step) * 1000, \ }, \ - .min_uV = (min) * 1000, \ .max_uV = (max) * 1000, \ - .step_uV = (step) * 1000, \ .vol_reg = _pmic##_##vreg, \ .vol_shift = (0), \ .vol_nbits = (nbits), \ @@ -517,6 +458,7 @@ static int __devinit da903x_regulator_probe(struct platform_device *pdev) { struct da903x_regulator_info *ri = NULL; struct regulator_dev *rdev; + struct regulator_config config = { }; ri = find_regulator_info(pdev->id); if (ri == NULL) { @@ -527,7 +469,7 @@ static int __devinit da903x_regulator_probe(struct platform_device *pdev) /* Workaround for the weird LDO12 voltage setting */ if (ri->desc.id == DA9034_ID_LDO12) { ri->desc.ops = &da9034_regulator_ldo12_ops; - ri->desc.n_voltages = ARRAY_SIZE(da9034_ldo12_data); + ri->desc.n_voltages = 16; } if (ri->desc.id == DA9030_ID_LDO14) @@ -536,8 +478,11 @@ static int __devinit da903x_regulator_probe(struct platform_device *pdev) if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15) ri->desc.ops = &da9030_regulator_ldo1_15_ops; - rdev = regulator_register(&ri->desc, &pdev->dev, - pdev->dev.platform_data, ri, NULL); + config.dev = &pdev->dev; + config.init_data = pdev->dev.platform_data; + config.driver_data = ri; + + rdev = regulator_register(&ri->desc, &config); if (IS_ERR(rdev)) { dev_err(&pdev->dev, "failed to register regulator %s\n", ri->desc.name); |