1 files changed, 201 insertions, 18 deletions

diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 2eefc1a0cf0..6e18e56d850 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -19,6 +19,8 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/gpio.h>
 
 #include <linux/mfd/wm831x/core.h>
 #include <linux/mfd/wm831x/regulator.h>
@@ -39,6 +41,7 @@
 #define WM831X_DCDC_CONTROL_2     1
 #define WM831X_DCDC_ON_CONFIG     2
 #define WM831X_DCDC_SLEEP_CONTROL 3
+#define WM831X_DCDC_DVS_CONTROL   4
 
 /*
  * Shared
@@ -50,6 +53,10 @@ struct wm831x_dcdc {
 	int base;
 	struct wm831x *wm831x;
 	struct regulator_dev *regulator;
+	int dvs_gpio;
+	int dvs_gpio_state;
+	int on_vsel;
+	int dvs_vsel;
 };
 
 static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev)
@@ -240,11 +247,9 @@ static int wm831x_buckv_list_voltage(struct regulator_dev *rdev,
 	return -EINVAL;
 }
 
-static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg,
-					 int min_uV, int max_uV)
+static int wm831x_buckv_select_min_voltage(struct regulator_dev *rdev,
+					   int min_uV, int max_uV)
 {
-	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
-	struct wm831x *wm831x = dcdc->wm831x;
 	u16 vsel;
 
 	if (min_uV < 600000)
@@ -257,39 +262,126 @@ static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg,
 	if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)
 		return -EINVAL;
 
-	return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel);
+	return vsel;
+}
+
+static int wm831x_buckv_select_max_voltage(struct regulator_dev *rdev,
+					   int min_uV, int max_uV)
+{
+	u16 vsel;
+
+	if (max_uV < 600000 || max_uV > 1800000)
+		return -EINVAL;
+
+	vsel = ((max_uV - 600000) / 12500) + 8;
+
+	if (wm831x_buckv_list_voltage(rdev, vsel) < min_uV ||
+	    wm831x_buckv_list_voltage(rdev, vsel) < max_uV)
+		return -EINVAL;
+
+	return vsel;
+}
+
+static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state)
+{
+	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+
+	if (state == dcdc->dvs_gpio_state)
+		return 0;
+
+	dcdc->dvs_gpio_state = state;
+	gpio_set_value(dcdc->dvs_gpio, state);
+
+	/* Should wait for DVS state change to be asserted if we have
+	 * a GPIO for it, for now assume the device is configured
+	 * for the fastest possible transition.
+	 */
+
+	return 0;
 }
 
 static int wm831x_buckv_set_voltage(struct regulator_dev *rdev,
-				     int min_uV, int max_uV)
+				    int min_uV, int max_uV)
 {
 	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
-	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+	struct wm831x *wm831x = dcdc->wm831x;
+	int on_reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+	int dvs_reg = dcdc->base + WM831X_DCDC_DVS_CONTROL;
+	int vsel, ret;
+
+	vsel = wm831x_buckv_select_min_voltage(rdev, min_uV, max_uV);
+	if (vsel < 0)
+		return vsel;
+
+	/* If this value is already set then do a GPIO update if we can */
+	if (dcdc->dvs_gpio && dcdc->on_vsel == vsel)
+		return wm831x_buckv_set_dvs(rdev, 0);
+
+	if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel)
+		return wm831x_buckv_set_dvs(rdev, 1);
+
+	/* Always set the ON status to the minimum voltage */
+	ret = wm831x_set_bits(wm831x, on_reg, WM831X_DC1_ON_VSEL_MASK, vsel);
+	if (ret < 0)
+		return ret;
+	dcdc->on_vsel = vsel;
+
+	if (!dcdc->dvs_gpio)
+		return ret;
+
+	/* Kick the voltage transition now */
+	ret = wm831x_buckv_set_dvs(rdev, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Set the high voltage as the DVS voltage.  This is optimised
+	 * for CPUfreq usage, most processors will keep the maximum
+	 * voltage constant and lower the minimum with the frequency. */
+	vsel = wm831x_buckv_select_max_voltage(rdev, min_uV, max_uV);
+	if (vsel < 0) {
+		/* This should never happen - at worst the same vsel
+		 * should be chosen */
+		WARN_ON(vsel < 0);
+		return 0;
+	}
+
+	/* Don't bother if it's the same VSEL we're already using */
+	if (vsel == dcdc->on_vsel)
+		return 0;
+
+	ret = wm831x_set_bits(wm831x, dvs_reg, WM831X_DC1_DVS_VSEL_MASK, vsel);
+	if (ret == 0)
+		dcdc->dvs_vsel = vsel;
+	else
+		dev_warn(wm831x->dev, "Failed to set DCDC DVS VSEL: %d\n",
+			 ret);
 
-	return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV);
+	return 0;
 }
 
 static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
-					     int uV)
+					    int uV)
 {
 	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+	struct wm831x *wm831x = dcdc->wm831x;
 	u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+	int vsel;
 
-	return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV);
+	vsel = wm831x_buckv_select_min_voltage(rdev, uV, uV);
+	if (vsel < 0)
+		return vsel;
+
+	return wm831x_set_bits(wm831x, reg, WM831X_DC1_SLP_VSEL_MASK, vsel);
 }
 
 static int wm831x_buckv_get_voltage(struct regulator_dev *rdev)
 {
 	struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
-	struct wm831x *wm831x = dcdc->wm831x;
-	u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
-	int val;
-
-	val = wm831x_reg_read(wm831x, reg);
-	if (val < 0)
-		return val;
 
-	return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK);
+	if (dcdc->dvs_gpio && dcdc->dvs_gpio_state)
+		return wm831x_buckv_list_voltage(rdev, dcdc->dvs_vsel);
+	else
+		return wm831x_buckv_list_voltage(rdev, dcdc->on_vsel);
 }
 
 /* Current limit options */
@@ -346,6 +438,64 @@ static struct regulator_ops wm831x_buckv_ops = {
 	.set_suspend_mode = wm831x_dcdc_set_suspend_mode,
 };
 
+/*
+ * Set up DVS control.  We just log errors since we can still run
+ * (with reduced performance) if we fail.
+ */
+static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc,
+					    struct wm831x_buckv_pdata *pdata)
+{
+	struct wm831x *wm831x = dcdc->wm831x;
+	int ret;
+	u16 ctrl;
+
+	if (!pdata || !pdata->dvs_gpio)
+		return;
+
+	switch (pdata->dvs_control_src) {
+	case 1:
+		ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT;
+		break;
+	case 2:
+		ctrl = 3 << WM831X_DC1_DVS_SRC_SHIFT;
+		break;
+	default:
+		dev_err(wm831x->dev, "Invalid DVS control source %d for %s\n",
+			pdata->dvs_control_src, dcdc->name);
+		return;
+	}
+
+	ret = wm831x_set_bits(wm831x, dcdc->base + WM831X_DCDC_DVS_CONTROL,
+			      WM831X_DC1_DVS_SRC_MASK, ctrl);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to set %s DVS source: %d\n",
+			dcdc->name, ret);
+		return;
+	}
+
+	ret = gpio_request(pdata->dvs_gpio, "DCDC DVS");
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n",
+			dcdc->name, ret);
+		return;
+	}
+
+	/* gpiolib won't let us read the GPIO status so pick the higher
+	 * of the two existing voltages so we take it as platform data.
+	 */
+	dcdc->dvs_gpio_state = pdata->dvs_init_state;
+
+	ret = gpio_direction_output(pdata->dvs_gpio, dcdc->dvs_gpio_state);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to enable %s DVS GPIO: %d\n",
+			dcdc->name, ret);
+		gpio_free(pdata->dvs_gpio);
+		return;
+	}
+
+	dcdc->dvs_gpio = pdata->dvs_gpio;
+}
+
 static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
@@ -384,6 +534,23 @@ static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
 	dcdc->desc.ops = &wm831x_buckv_ops;
 	dcdc->desc.owner = THIS_MODULE;
 
+	ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read ON VSEL: %d\n", ret);
+		goto err;
+	}
+	dcdc->on_vsel = ret & WM831X_DC1_ON_VSEL_MASK;
+
+	ret = wm831x_reg_read(wm831x, dcdc->base + WM831X_DCDC_ON_CONFIG);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read DVS VSEL: %d\n", ret);
+		goto err;
+	}
+	dcdc->dvs_vsel = ret & WM831X_DC1_DVS_VSEL_MASK;
+
+	if (pdata->dcdc[id])
+		wm831x_buckv_dvs_init(dcdc, pdata->dcdc[id]->driver_data);
+
 	dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
 					     pdata->dcdc[id], dcdc);
 	if (IS_ERR(dcdc->regulator)) {
@@ -422,6 +589,8 @@ err_uv:
 err_regulator:
 	regulator_unregister(dcdc->regulator);
 err:
+	if (dcdc->dvs_gpio)
+		gpio_free(dcdc->dvs_gpio);
 	kfree(dcdc);
 	return ret;
 }
@@ -431,9 +600,13 @@ static __devexit int wm831x_buckv_remove(struct platform_device *pdev)
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
 	struct wm831x *wm831x = dcdc->wm831x;
 
+	platform_set_drvdata(pdev, NULL);
+
 	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc);
 	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
 	regulator_unregister(dcdc->regulator);
+	if (dcdc->dvs_gpio)
+		gpio_free(dcdc->dvs_gpio);
 	kfree(dcdc);
 
 	return 0;
@@ -444,6 +617,7 @@ static struct platform_driver wm831x_buckv_driver = {
 	.remove = __devexit_p(wm831x_buckv_remove),
 	.driver		= {
 		.name	= "wm831x-buckv",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -598,6 +772,8 @@ static __devexit int wm831x_buckp_remove(struct platform_device *pdev)
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
 	struct wm831x *wm831x = dcdc->wm831x;
 
+	platform_set_drvdata(pdev, NULL);
+
 	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
 	regulator_unregister(dcdc->regulator);
 	kfree(dcdc);
@@ -610,6 +786,7 @@ static struct platform_driver wm831x_buckp_driver = {
 	.remove = __devexit_p(wm831x_buckp_remove),
 	.driver		= {
 		.name	= "wm831x-buckp",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -724,6 +901,8 @@ static __devexit int wm831x_boostp_remove(struct platform_device *pdev)
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
 	struct wm831x *wm831x = dcdc->wm831x;
 
+	platform_set_drvdata(pdev, NULL);
+
 	wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
 	regulator_unregister(dcdc->regulator);
 	kfree(dcdc);
@@ -736,6 +915,7 @@ static struct platform_driver wm831x_boostp_driver = {
 	.remove = __devexit_p(wm831x_boostp_remove),
 	.driver		= {
 		.name	= "wm831x-boostp",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -808,6 +988,8 @@ static __devexit int wm831x_epe_remove(struct platform_device *pdev)
 {
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
 
+	platform_set_drvdata(pdev, NULL);
+
 	regulator_unregister(dcdc->regulator);
 	kfree(dcdc);
 
@@ -819,6 +1001,7 @@ static struct platform_driver wm831x_epe_driver = {
 	.remove = __devexit_p(wm831x_epe_remove),
 	.driver		= {
 		.name	= "wm831x-epe",
+		.owner	= THIS_MODULE,
 	},
 };