summaryrefslogtreecommitdiffstats
path: root/drivers/regulator
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/regulator')
-rw-r--r--drivers/regulator/ab8500.c161
1 files changed, 82 insertions, 79 deletions
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 9a3dc7973ae..ccb0bfd71f2 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -3,18 +3,13 @@
*
* License Terms: GNU General Public License v2
*
- * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ * Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
*
* AB8500 peripheral regulators
*
- * AB8500 supports the following regulators,
- * LDOs - VAUDIO, VANAMIC2/2, VDIGMIC, VINTCORE12, VTVOUT,
- * VAUX1/2/3, VANA
- *
- * for DB8500 cut 1.0 and previous versions of the silicon, all accesses
- * to registers are through the DB8500 SPI. In cut 1.1 onwards, these
- * accesses are through the DB8500 PRCMU I2C
- *
+ * AB8500 supports the following regulators:
+ * VAUX1/2/3, VINTCORE, VTVOUT, VAUDIO, VAMIC1/2, VDMIC, VANA
*/
#include <linux/init.h>
#include <linux/kernel.h>
@@ -28,6 +23,7 @@
/**
* struct ab8500_regulator_info - ab8500 regulator information
+ * @dev: device pointer
* @desc: regulator description
* @regulator_dev: regulator device
* @max_uV: maximum voltage (for variable voltage supplies)
@@ -35,12 +31,12 @@
* @fixed_uV: typical voltage (for fixed voltage supplies)
* @update_bank: bank to control on/off
* @update_reg: register to control on/off
- * @mask: mask to enable/disable regulator
- * @enable: bits to enable the regulator in normal(high power) mode
+ * @update_mask: mask to enable/disable regulator
+ * @update_val_enable: bits to enable the regulator in normal (high power) mode
* @voltage_bank: bank to control regulator voltage
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
- * @supported_voltages: supported voltage table
+ * @voltages: supported voltage table
* @voltages_len: number of supported voltages for the regulator
*/
struct ab8500_regulator_info {
@@ -52,12 +48,12 @@ struct ab8500_regulator_info {
int fixed_uV;
u8 update_bank;
u8 update_reg;
- u8 mask;
- u8 enable;
+ u8 update_mask;
+ u8 update_val_enable;
u8 voltage_bank;
u8 voltage_reg;
u8 voltage_mask;
- int const *supported_voltages;
+ int const *voltages;
int voltages_len;
};
@@ -112,7 +108,8 @@ static int ab8500_regulator_enable(struct regulator_dev *rdev)
return -EINVAL;
ret = abx500_mask_and_set_register_interruptible(info->dev,
- info->update_bank, info->update_reg, info->mask, info->enable);
+ info->update_bank, info->update_reg,
+ info->update_mask, info->update_val_enable);
if (ret < 0)
dev_err(rdev_get_dev(rdev),
"couldn't set enable bits for regulator\n");
@@ -129,7 +126,8 @@ static int ab8500_regulator_disable(struct regulator_dev *rdev)
return -EINVAL;
ret = abx500_mask_and_set_register_interruptible(info->dev,
- info->update_bank, info->update_reg, info->mask, 0x0);
+ info->update_bank, info->update_reg,
+ info->update_mask, 0x0);
if (ret < 0)
dev_err(rdev_get_dev(rdev),
"couldn't set disable bits for regulator\n");
@@ -154,7 +152,7 @@ static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
return ret;
}
- if (value & info->mask)
+ if (value & info->update_mask)
return true;
else
return false;
@@ -176,7 +174,7 @@ static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
if (selector >= info->voltages_len)
return -EINVAL;
- return info->supported_voltages[selector];
+ return info->voltages[selector];
}
static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
@@ -200,9 +198,9 @@ static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
/* vintcore has a different layout */
value &= info->voltage_mask;
if (regulator_id == AB8500_LDO_INTCORE)
- ret = info->supported_voltages[value >> 0x3];
+ ret = info->voltages[value >> 0x3];
else
- ret = info->supported_voltages[value];
+ ret = info->voltages[value];
return ret;
}
@@ -215,8 +213,8 @@ static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
/* check the supported voltage */
for (i = 0; i < info->voltages_len; i++) {
- if ((info->supported_voltages[i] >= min_uV) &&
- (info->supported_voltages[i] <= max_uV))
+ if ((info->voltages[i] >= min_uV) &&
+ (info->voltages[i] <= max_uV))
return i;
}
@@ -284,74 +282,79 @@ static struct regulator_ops ab8500_ldo_fixed_ops = {
.list_voltage = ab8500_list_voltage,
};
-#define AB8500_LDO(_id, min, max, bank, reg, reg_mask, \
- reg_enable, volt_bank, volt_reg, volt_mask, \
- voltages, len_volts) \
-{ \
+#define AB8500_LDO(_id, _min_mV, _max_mV, \
+ _u_bank, _u_reg, _u_mask, _u_val_enable, \
+ _v_bank, _v_reg, _v_mask, _v_table, _v_table_len) \
+[AB8500_LDO_##_id] = { \
.desc = { \
- .name = "LDO-" #_id, \
- .ops = &ab8500_regulator_ops, \
- .type = REGULATOR_VOLTAGE, \
- .id = AB8500_LDO_##_id, \
- .owner = THIS_MODULE, \
+ .name = "LDO-" #_id, \
+ .ops = &ab8500_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = AB8500_LDO_##_id, \
+ .owner = THIS_MODULE, \
}, \
- .min_uV = (min) * 1000, \
- .max_uV = (max) * 1000, \
- .update_bank = bank, \
- .update_reg = reg, \
- .mask = reg_mask, \
- .enable = reg_enable, \
- .voltage_bank = volt_bank, \
- .voltage_reg = volt_reg, \
- .voltage_mask = volt_mask, \
- .supported_voltages = voltages, \
- .voltages_len = len_volts, \
- .fixed_uV = 0, \
+ .min_uV = (_min_mV) * 1000, \
+ .max_uV = (_max_mV) * 1000, \
+ .update_bank = _u_bank, \
+ .update_reg = _u_reg, \
+ .update_mask = _u_mask, \
+ .update_val_enable = _u_val_enable, \
+ .voltage_bank = _v_bank, \
+ .voltage_reg = _v_reg, \
+ .voltage_mask = _v_mask, \
+ .voltages = _v_table, \
+ .voltages_len = _v_table_len, \
+ .fixed_uV = 0, \
}
-#define AB8500_FIXED_LDO(_id, fixed, bank, reg, \
- reg_mask, reg_enable) \
-{ \
- .desc = { \
- .name = "LDO-" #_id, \
- .ops = &ab8500_ldo_fixed_ops, \
- .type = REGULATOR_VOLTAGE, \
- .id = AB8500_LDO_##_id, \
- .owner = THIS_MODULE, \
- }, \
- .fixed_uV = fixed * 1000, \
- .update_bank = bank, \
- .update_reg = reg, \
- .mask = reg_mask, \
- .enable = reg_enable, \
+#define AB8500_FIXED_LDO(_id, _fixed_mV, \
+ _u_bank, _u_reg, _u_mask, _u_val_enable) \
+[AB8500_LDO_##_id] = { \
+ .desc = { \
+ .name = "LDO-" #_id, \
+ .ops = &ab8500_ldo_fixed_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = AB8500_LDO_##_id, \
+ .owner = THIS_MODULE, \
+ }, \
+ .fixed_uV = (_fixed_mV) * 1000, \
+ .update_bank = _u_bank, \
+ .update_reg = _u_reg, \
+ .update_mask = _u_mask, \
+ .update_val_enable = _u_val_enable, \
}
static struct ab8500_regulator_info ab8500_regulator_info[] = {
/*
- * Variable Voltage LDOs
- * name, min uV, max uV, ctrl bank, ctrl reg, reg mask, enable mask,
- * volt ctrl bank, volt ctrl reg, volt ctrl mask, volt table,
- * num supported volts
+ * Variable Voltage Regulators
+ * name, min mV, max mV,
+ * update bank, reg, mask, enable val
+ * volt bank, reg, mask, table, table length
*/
- AB8500_LDO(AUX1, 1100, 3300, 0x04, 0x09, 0x3, 0x1, 0x04, 0x1f, 0xf,
- ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
- AB8500_LDO(AUX2, 1100, 3300, 0x04, 0x09, 0xc, 0x4, 0x04, 0x20, 0xf,
- ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
- AB8500_LDO(AUX3, 1100, 3300, 0x04, 0x0a, 0x3, 0x1, 0x04, 0x21, 0x7,
- ldo_vaux3_voltages, ARRAY_SIZE(ldo_vaux3_voltages)),
- AB8500_LDO(INTCORE, 1100, 3300, 0x03, 0x80, 0x44, 0x4, 0x03, 0x80, 0x38,
+ AB8500_LDO(AUX1, 1100, 3300,
+ 0x04, 0x09, 0x03, 0x01, 0x04, 0x1f, 0x0f,
+ ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
+ AB8500_LDO(AUX2, 1100, 3300,
+ 0x04, 0x09, 0x0c, 0x04, 0x04, 0x20, 0x0f,
+ ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
+ AB8500_LDO(AUX3, 1100, 3300,
+ 0x04, 0x0a, 0x03, 0x01, 0x04, 0x21, 0x07,
+ ldo_vaux3_voltages, ARRAY_SIZE(ldo_vaux3_voltages)),
+ AB8500_LDO(INTCORE, 1100, 3300,
+ 0x03, 0x80, 0x44, 0x04, 0x03, 0x80, 0x38,
ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
/*
- * Fixed Voltage LDOs
- * name, o/p uV, ctrl bank, ctrl reg, enable, disable
+ * Fixed Voltage Regulators
+ * name, fixed mV,
+ * update bank, reg, mask, enable val
*/
- AB8500_FIXED_LDO(TVOUT, 2000, 0x03, 0x80, 0x82, 0x2),
- AB8500_FIXED_LDO(AUDIO, 2000, 0x03, 0x83, 0x2, 0x2),
- AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03, 0x83, 0x08, 0x08),
- AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03, 0x83, 0x10, 0x10),
- AB8500_FIXED_LDO(DMIC, 1800, 0x03, 0x83, 0x04, 0x04),
- AB8500_FIXED_LDO(ANA, 1200, 0x04, 0x06, 0xc, 0x4),
+ AB8500_FIXED_LDO(TVOUT, 2000, 0x03, 0x80, 0x82, 0x02),
+ AB8500_FIXED_LDO(AUDIO, 2000, 0x03, 0x83, 0x02, 0x02),
+ AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03, 0x83, 0x08, 0x08),
+ AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03, 0x83, 0x10, 0x10),
+ AB8500_FIXED_LDO(DMIC, 1800, 0x03, 0x83, 0x04, 0x04),
+ AB8500_FIXED_LDO(ANA, 1200, 0x04, 0x06, 0x0c, 0x04),
};
static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
@@ -385,7 +388,7 @@ static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
if (info->desc.id == AB8500_LDO_AUX3) {
info->desc.n_voltages =
ARRAY_SIZE(ldo_vauxn_voltages);
- info->supported_voltages = ldo_vauxn_voltages;
+ info->voltages = ldo_vauxn_voltages;
info->voltages_len =
ARRAY_SIZE(ldo_vauxn_voltages);
info->voltage_mask = 0xf;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 04:07:45 +0000