diff options
Diffstat (limited to 'drivers/regulator')
| -rw-r--r-- | drivers/regulator/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
| -rw-r--r-- | drivers/regulator/max8660.c | 510 |
3 files changed, 518 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 7cfdd65bebb..9e0aa14dc6a 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -69,6 +69,13 @@ config REGULATOR_MAX1586 regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. +config REGULATOR_MAX8660 + tristate "Maxim 8660/8661 voltage regulator" + depends on I2C + help + This driver controls a Maxim 8660/8661 voltage output + regulator via I2C bus. + config REGULATOR_TWL4030 bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC" depends on TWL4030_CORE diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 9ae3cc44e66..12285e41bee 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o +obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c new file mode 100644 index 00000000000..acc2fb7b608 --- /dev/null +++ b/drivers/regulator/max8660.c @@ -0,0 +1,510 @@ +/* + * max8660.c -- Voltage regulation for the Maxim 8660/8661 + * + * based on max1586.c and wm8400-regulator.c + * + * Copyright (C) 2009 Wolfram Sang, Pengutronix e.K. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place, Suite 330, Boston, MA 02111-1307 USA + * + * Some info: + * + * Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8660-MAX8661.pdf + * + * This chip is a bit nasty because it is a write-only device. Thus, the driver + * uses shadow registers to keep track of its values. The main problem appears + * to be the initialization: When Linux boots up, we cannot know if the chip is + * in the default state or not, so we would have to pass such information in + * platform_data. As this adds a bit of complexity to the driver, this is left + * out for now until it is really needed. + * + * [A|S|M]DTV1 registers are currently not used, but [A|S|M]DTV2. + * + * If the driver is feature complete, it might be worth to check if one set of + * functions for V3-V7 is sufficient. For maximum flexibility during + * development, they are separated for now. + * + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/max8660.h> + +#define MAX8660_DCDC_MIN_UV 725000 +#define MAX8660_DCDC_MAX_UV 1800000 +#define MAX8660_DCDC_STEP 25000 +#define MAX8660_DCDC_MAX_SEL 0x2b + +#define MAX8660_LDO5_MIN_UV 1700000 +#define MAX8660_LDO5_MAX_UV 2000000 +#define MAX8660_LDO5_STEP 25000 +#define MAX8660_LDO5_MAX_SEL 0x0c + +#define MAX8660_LDO67_MIN_UV 1800000 +#define MAX8660_LDO67_MAX_UV 3300000 +#define MAX8660_LDO67_STEP 100000 +#define MAX8660_LDO67_MAX_SEL 0x0f + +enum { + MAX8660_OVER1, + MAX8660_OVER2, + MAX8660_VCC1, + MAX8660_ADTV1, + MAX8660_ADTV2, + MAX8660_SDTV1, + MAX8660_SDTV2, + MAX8660_MDTV1, + MAX8660_MDTV2, + MAX8660_L12VCR, + MAX8660_FPWM, + MAX8660_N_REGS, /* not a real register */ +}; + +struct max8660 { + struct i2c_client *client; + u8 shadow_regs[MAX8660_N_REGS]; /* as chip is write only */ + struct regulator_dev *rdev[]; +}; + +static int max8660_write(struct max8660 *max8660, u8 reg, u8 mask, u8 val) +{ + static const u8 max8660_addresses[MAX8660_N_REGS] = + { 0x10, 0x12, 0x20, 0x23, 0x24, 0x29, 0x2a, 0x32, 0x33, 0x39, 0x80 }; + + int ret; + u8 reg_val = (max8660->shadow_regs[reg] & mask) | val; + dev_vdbg(&max8660->client->dev, "Writing reg %02x with %02x\n", + max8660_addresses[reg], reg_val); + + ret = i2c_smbus_write_byte_data(max8660->client, + max8660_addresses[reg], reg_val); + if (ret == 0) + max8660->shadow_regs[reg] = reg_val; + + return ret; +} + + +/* + * DCDC functions + */ + +static int max8660_dcdc_is_enabled(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 val = max8660->shadow_regs[MAX8660_OVER1]; + u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4; + return !!(val & mask); +} + +static int max8660_dcdc_enable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 bit = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4; + return max8660_write(max8660, MAX8660_OVER1, 0xff, bit); +} + +static int max8660_dcdc_disable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? ~1 : ~4; + return max8660_write(max8660, MAX8660_OVER1, mask, 0); +} + +static int max8660_dcdc_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_DCDC_MAX_SEL) + return -EINVAL; + return MAX8660_DCDC_MIN_UV + selector * MAX8660_DCDC_STEP; +} + +static int max8660_dcdc_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2; + u8 selector = max8660->shadow_regs[reg]; + return MAX8660_DCDC_MIN_UV + selector * MAX8660_DCDC_STEP; +} + +static int max8660_dcdc_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 reg, selector, bits; + int ret; + + if (min_uV < MAX8660_DCDC_MIN_UV || min_uV > MAX8660_DCDC_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_DCDC_MIN_UV || max_uV > MAX8660_DCDC_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_DCDC_MIN_UV - MAX8660_DCDC_STEP + 1)) + / MAX8660_DCDC_STEP; + + ret = max8660_dcdc_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2; + ret = max8660_write(max8660, reg, 0, selector); + if (ret) + return ret; + + /* Select target voltage register and activate regulation */ + bits = (rdev_get_id(rdev) == MAX8660_V3) ? 0x03 : 0x30; + return max8660_write(max8660, MAX8660_VCC1, 0xff, bits); +} + +static struct regulator_ops max8660_dcdc_ops = { + .is_enabled = max8660_dcdc_is_enabled, + .list_voltage = max8660_dcdc_list, + .set_voltage = max8660_dcdc_set, + .get_voltage = max8660_dcdc_get, +}; + + +/* + * LDO5 functions + */ + +static int max8660_ldo5_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_LDO5_MAX_SEL) + return -EINVAL; + return MAX8660_LDO5_MIN_UV + selector * MAX8660_LDO5_STEP; +} + +static int max8660_ldo5_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector = max8660->shadow_regs[MAX8660_MDTV2]; + + return MAX8660_LDO5_MIN_UV + selector * MAX8660_LDO5_STEP; +} + +static int max8660_ldo5_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector; + int ret; + + if (min_uV < MAX8660_LDO5_MIN_UV || min_uV > MAX8660_LDO5_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_LDO5_MIN_UV || max_uV > MAX8660_LDO5_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_LDO5_MIN_UV - MAX8660_LDO5_STEP + 1)) + / MAX8660_LDO5_STEP; + ret = max8660_ldo5_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + ret = max8660_write(max8660, MAX8660_MDTV2, 0, selector); + if (ret) + return ret; + + /* Select target voltage register and activate regulation */ + return max8660_write(max8660, MAX8660_VCC1, 0xff, 0xc0); +} + +static struct regulator_ops max8660_ldo5_ops = { + .list_voltage = max8660_ldo5_list, + .set_voltage = max8660_ldo5_set, + .get_voltage = max8660_ldo5_get, +}; + + +/* + * LDO67 functions + */ + +static int max8660_ldo67_is_enabled(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 val = max8660->shadow_regs[MAX8660_OVER2]; + u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4; + return !!(val & mask); +} + +static int max8660_ldo67_enable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 bit = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4; + return max8660_write(max8660, MAX8660_OVER2, 0xff, bit); +} + +static int max8660_ldo67_disable(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? ~2 : ~4; + return max8660_write(max8660, MAX8660_OVER2, mask, 0); +} + +static int max8660_ldo67_list(struct regulator_dev *rdev, unsigned selector) +{ + if (selector > MAX8660_LDO67_MAX_SEL) + return -EINVAL; + return MAX8660_LDO67_MIN_UV + selector * MAX8660_LDO67_STEP; +} + +static int max8660_ldo67_get(struct regulator_dev *rdev) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 shift = (rdev_get_id(rdev) == MAX8660_V6) ? 0 : 4; + u8 selector = (max8660->shadow_regs[MAX8660_L12VCR] >> shift) & 0xf; + + return MAX8660_LDO67_MIN_UV + selector * MAX8660_LDO67_STEP; +} + +static int max8660_ldo67_set(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + struct max8660 *max8660 = rdev_get_drvdata(rdev); + u8 selector; + int ret; + + if (min_uV < MAX8660_LDO67_MIN_UV || min_uV > MAX8660_LDO67_MAX_UV) + return -EINVAL; + if (max_uV < MAX8660_LDO67_MIN_UV || max_uV > MAX8660_LDO67_MAX_UV) + return -EINVAL; + + selector = (min_uV - (MAX8660_LDO67_MIN_UV - MAX8660_LDO67_STEP + 1)) + / MAX8660_LDO67_STEP; + + ret = max8660_ldo67_list(rdev, selector); + if (ret < 0 || ret > max_uV) + return -EINVAL; + + if (rdev_get_id(rdev) == MAX8660_V6) + return max8660_write(max8660, MAX8660_L12VCR, 0xf0, selector); + else + return max8660_write(max8660, MAX8660_L12VCR, 0x0f, selector << 4); +} + +static struct regulator_ops max8660_ldo67_ops = { + .is_enabled = max8660_ldo67_is_enabled, + .enable = max8660_ldo67_enable, + .disable = max8660_ldo67_disable, + .list_voltage = max8660_ldo67_list, + .get_voltage = max8660_ldo67_get, + .set_voltage = max8660_ldo67_set, +}; + +static struct regulator_desc max8660_reg[] = { + { + .name = "V3(DCDC)", + .id = MAX8660_V3, + .ops = &max8660_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_DCDC_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V4(DCDC)", + .id = MAX8660_V4, + .ops = &max8660_dcdc_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_DCDC_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V5(LDO)", + .id = MAX8660_V5, + .ops = &max8660_ldo5_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO5_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V6(LDO)", + .id = MAX8660_V6, + .ops = &max8660_ldo67_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO67_MAX_SEL + 1, + .owner = THIS_MODULE, + }, + { + .name = "V7(LDO)", + .id = MAX8660_V7, + .ops = &max8660_ldo67_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = MAX8660_LDO67_MAX_SEL + 1, + .owner = THIS_MODULE, + }, +}; + +static int max8660_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + struct regulator_dev **rdev; + struct max8660_platform_data *pdata = client->dev.platform_data; + struct max8660 *max8660; + int boot_on, i, id, ret = -EINVAL; + + if (pdata->num_subdevs > MAX8660_V_END) { + dev_err(&client->dev, "Too much regulators found!\n"); + goto out; + } + + max8660 = kzalloc(sizeof(struct max8660) + + sizeof(struct regulator_dev *) * MAX8660_V_END, + GFP_KERNEL); + if (!max8660) { + ret = -ENOMEM; + goto out; + } + + max8660->client = client; + rdev = max8660->rdev; + + if (pdata->en34_is_high) { + /* Simulate always on */ + max8660->shadow_regs[MAX8660_OVER1] = 5; + } else { + /* Otherwise devices can be toggled via software */ + max8660_dcdc_ops.enable = max8660_dcdc_enable; + max8660_dcdc_ops.disable = max8660_dcdc_disable; + } + + /* + * First, set up shadow registers to prevent glitches. As some + * registers are shared between regulators, everything must be properly + * set up for all regulators in advance. + */ + max8660->shadow_regs[MAX8660_ADTV1] = + max8660->shadow_regs[MAX8660_ADTV2] = + max8660->shadow_regs[MAX8660_SDTV1] = + max8660->shadow_regs[MAX8660_SDTV2] = 0x1b; + max8660->shadow_regs[MAX8660_MDTV1] = + max8660->shadow_regs[MAX8660_MDTV2] = 0x04; + + for (i = 0; i < pdata->num_subdevs; i++) { + + if (!pdata->subdevs[i].platform_data) + goto err_free; + + boot_on = pdata->subdevs[i].platform_data->constraints.boot_on; + + switch (pdata->subdevs[i].id) { + case MAX8660_V3: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER1] |= 1; + break; + + case MAX8660_V4: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER1] |= 4; + break; + + case MAX8660_V5: + break; + + case MAX8660_V6: + if (boot_on) + max8660->shadow_regs[MAX8660_OVER2] |= 2; + break; + + case MAX8660_V7: + if (!strcmp(i2c_id->name, "max8661")) { + dev_err(&client->dev, "Regulator not on this chip!\n"); + goto err_free; + } + + if (boot_on) + max8660->shadow_regs[MAX8660_OVER2] |= 4; + break; + + default: + dev_err(&client->dev, "invalid regulator %s\n", + pdata->subdevs[i].name); + goto err_free; + } + } + + /* Finally register devices */ + for (i = 0; i < pdata->num_subdevs; i++) { + + id = pdata->subdevs[i].id; + + rdev[i] = regulator_register(&max8660_reg[id], &client->dev, + pdata->subdevs[i].platform_data, + max8660); + if (IS_ERR(rdev[i])) { + ret = PTR_ERR(rdev[i]); + dev_err(&client->dev, "failed to register %s\n", + max8660_reg[id].name); + goto err_unregister; + } + } + + i2c_set_clientdata(client, rdev); + dev_info(&client->dev, "Maxim 8660/8661 regulator driver loaded\n"); + return 0; + +err_unregister: + while (--i >= 0) + regulator_unregister(rdev[i]); +err_free: + kfree(max8660); +out: + return ret; +} + +static int max8660_remove(struct i2c_client *client) +{ + struct regulator_dev **rdev = i2c_get_clientdata(client); + int i; + + for (i = 0; i < MAX8660_V_END; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + kfree(rdev); + i2c_set_clientdata(client, NULL); + + return 0; +} + +static const struct i2c_device_id max8660_id[] = { + { "max8660", 0 }, + { "max8661", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max8660_id); + +static struct i2c_driver max8660_driver = { + .probe = max8660_probe, + .remove = max8660_remove, + .driver = { + .name = "max8660", + }, + .id_table = max8660_id, +}; + +static int __init max8660_init(void) +{ + return i2c_add_driver(&max8660_driver); +} +subsys_initcall(max8660_init); + +static void __exit max8660_exit(void) +{ + i2c_del_driver(&max8660_driver); +} +module_exit(max8660_exit); + +/* Module information */ +MODULE_DESCRIPTION("MAXIM 8660/8661 voltage regulator driver"); +MODULE_AUTHOR("Wolfram Sang"); +MODULE_LICENSE("GPL v2"); |