3 files changed, 14 insertions, 14 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index a5d97eaee99..8bb26446037 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -66,7 +66,7 @@ config REGULATOR_USERSPACE_CONSUMER
 
 config REGULATOR_GPIO
 	tristate "GPIO regulator support"
-	depends on GENERIC_GPIO
+	depends on GPIOLIB
 	help
 	  This driver provides support for regulators that can be
 	  controlled via gpios.
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 014c92a5434..815d6df8bd5 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2705,7 +2705,7 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage);
 /**
  * regulator_set_current_limit - set regulator output current limit
  * @regulator: regulator source
- * @min_uA: Minimuum supported current in uA
+ * @min_uA: Minimum supported current in uA
  * @max_uA: Maximum supported current in uA
  *
  * Sets current sink to the desired output current. This can be set during
diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c
index 89bd2faaef8..ce89f7848a5 100644
--- a/drivers/regulator/dbx500-prcmu.c
+++ b/drivers/regulator/dbx500-prcmu.c
@@ -24,18 +24,6 @@
 static int power_state_active_cnt; /* will initialize to zero */
 static DEFINE_SPINLOCK(power_state_active_lock);
 
-int power_state_active_get(void)
-{
-	unsigned long flags;
-	int cnt;
-
-	spin_lock_irqsave(&power_state_active_lock, flags);
-	cnt = power_state_active_cnt;
-	spin_unlock_irqrestore(&power_state_active_lock, flags);
-
-	return cnt;
-}
-
 void power_state_active_enable(void)
 {
 	unsigned long flags;
@@ -65,6 +53,18 @@ out:
 
 #ifdef CONFIG_REGULATOR_DEBUG
 
+static int power_state_active_get(void)
+{
+	unsigned long flags;
+	int cnt;
+
+	spin_lock_irqsave(&power_state_active_lock, flags);
+	cnt = power_state_active_cnt;
+	spin_unlock_irqrestore(&power_state_active_lock, flags);
+
+	return cnt;
+}
+
 static struct ux500_regulator_debug {
 	struct dentry *dir;
 	struct dentry *status_file;