diff options
Diffstat (limited to 'drivers/rtc/rtc-cmos.c')
| -rw-r--r-- | drivers/rtc/rtc-cmos.c | 332 |
1 files changed, 208 insertions, 124 deletions
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index d7bb9bac71d..b184367637d 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -36,25 +36,9 @@ #include <linux/platform_device.h> #include <linux/mod_devicetable.h> -#ifdef CONFIG_HPET_EMULATE_RTC -#include <asm/hpet.h> -#endif - /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */ #include <asm-generic/rtc.h> -#ifndef CONFIG_HPET_EMULATE_RTC -#define is_hpet_enabled() 0 -#define hpet_set_alarm_time(hrs, min, sec) do { } while (0) -#define hpet_set_periodic_freq(arg) 0 -#define hpet_mask_rtc_irq_bit(arg) do { } while (0) -#define hpet_set_rtc_irq_bit(arg) do { } while (0) -#define hpet_rtc_timer_init() do { } while (0) -#define hpet_register_irq_handler(h) 0 -#define hpet_unregister_irq_handler(h) do { } while (0) -extern irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id); -#endif - struct cmos_rtc { struct rtc_device *rtc; struct device *dev; @@ -93,6 +77,72 @@ static inline int is_intr(u8 rtc_intr) /*----------------------------------------------------------------*/ +/* Much modern x86 hardware has HPETs (10+ MHz timers) which, because + * many BIOS programmers don't set up "sane mode" IRQ routing, are mostly + * used in a broken "legacy replacement" mode. The breakage includes + * HPET #1 hijacking the IRQ for this RTC, and being unavailable for + * other (better) use. + * + * When that broken mode is in use, platform glue provides a partial + * emulation of hardware RTC IRQ facilities using HPET #1. We don't + * want to use HPET for anything except those IRQs though... + */ +#ifdef CONFIG_HPET_EMULATE_RTC +#include <asm/hpet.h> +#else + +static inline int is_hpet_enabled(void) +{ + return 0; +} + +static inline int hpet_mask_rtc_irq_bit(unsigned long mask) +{ + return 0; +} + +static inline int hpet_set_rtc_irq_bit(unsigned long mask) +{ + return 0; +} + +static inline int +hpet_set_alarm_time(unsigned char hrs, unsigned char min, unsigned char sec) +{ + return 0; +} + +static inline int hpet_set_periodic_freq(unsigned long freq) +{ + return 0; +} + +static inline int hpet_rtc_dropped_irq(void) +{ + return 0; +} + +static inline int hpet_rtc_timer_init(void) +{ + return 0; +} + +extern irq_handler_t hpet_rtc_interrupt; + +static inline int hpet_register_irq_handler(irq_handler_t handler) +{ + return 0; +} + +static inline int hpet_unregister_irq_handler(irq_handler_t handler) +{ + return 0; +} + +#endif + +/*----------------------------------------------------------------*/ + static int cmos_read_time(struct device *dev, struct rtc_time *t) { /* REVISIT: if the clock has a "century" register, use @@ -185,11 +235,56 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t) return 0; } +static void cmos_checkintr(struct cmos_rtc *cmos, unsigned char rtc_control) +{ + unsigned char rtc_intr; + + /* NOTE after changing RTC_xIE bits we always read INTR_FLAGS; + * allegedly some older rtcs need that to handle irqs properly + */ + rtc_intr = CMOS_READ(RTC_INTR_FLAGS); + + if (is_hpet_enabled()) + return; + + rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; + if (is_intr(rtc_intr)) + rtc_update_irq(cmos->rtc, 1, rtc_intr); +} + +static void cmos_irq_enable(struct cmos_rtc *cmos, unsigned char mask) +{ + unsigned char rtc_control; + + /* flush any pending IRQ status, notably for update irqs, + * before we enable new IRQs + */ + rtc_control = CMOS_READ(RTC_CONTROL); + cmos_checkintr(cmos, rtc_control); + + rtc_control |= mask; + CMOS_WRITE(rtc_control, RTC_CONTROL); + hpet_set_rtc_irq_bit(mask); + + cmos_checkintr(cmos, rtc_control); +} + +static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask) +{ + unsigned char rtc_control; + + rtc_control = CMOS_READ(RTC_CONTROL); + rtc_control &= ~mask; + CMOS_WRITE(rtc_control, RTC_CONTROL); + hpet_mask_rtc_irq_bit(mask); + + cmos_checkintr(cmos, rtc_control); +} + static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t) { struct cmos_rtc *cmos = dev_get_drvdata(dev); unsigned char mon, mday, hrs, min, sec; - unsigned char rtc_control, rtc_intr; if (!is_valid_irq(cmos->irq)) return -EIO; @@ -213,17 +308,10 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t) sec = t->time.tm_sec; sec = (sec < 60) ? BIN2BCD(sec) : 0xff; - hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min, t->time.tm_sec); spin_lock_irq(&rtc_lock); /* next rtc irq must not be from previous alarm setting */ - rtc_control = CMOS_READ(RTC_CONTROL); - rtc_control &= ~RTC_AIE; - CMOS_WRITE(rtc_control, RTC_CONTROL); - rtc_intr = CMOS_READ(RTC_INTR_FLAGS); - rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; - if (is_intr(rtc_intr)) - rtc_update_irq(cmos->rtc, 1, rtc_intr); + cmos_irq_disable(cmos, RTC_AIE); /* update alarm */ CMOS_WRITE(hrs, RTC_HOURS_ALARM); @@ -237,14 +325,13 @@ static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t) CMOS_WRITE(mon, cmos->mon_alrm); } - if (t->enabled) { - rtc_control |= RTC_AIE; - CMOS_WRITE(rtc_control, RTC_CONTROL); - rtc_intr = CMOS_READ(RTC_INTR_FLAGS); - rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; - if (is_intr(rtc_intr)) - rtc_update_irq(cmos->rtc, 1, rtc_intr); - } + /* FIXME the HPET alarm glue currently ignores day_alrm + * and mon_alrm ... + */ + hpet_set_alarm_time(t->time.tm_hour, t->time.tm_min, t->time.tm_sec); + + if (t->enabled) + cmos_irq_enable(cmos, RTC_AIE); spin_unlock_irq(&rtc_lock); @@ -267,8 +354,8 @@ static int cmos_irq_set_freq(struct device *dev, int freq) f = 16 - f; spin_lock_irqsave(&rtc_lock, flags); - if (!hpet_set_periodic_freq(freq)) - CMOS_WRITE(RTC_REF_CLCK_32KHZ | f, RTC_FREQ_SELECT); + hpet_set_periodic_freq(freq); + CMOS_WRITE(RTC_REF_CLCK_32KHZ | f, RTC_FREQ_SELECT); spin_unlock_irqrestore(&rtc_lock, flags); return 0; @@ -277,26 +364,17 @@ static int cmos_irq_set_freq(struct device *dev, int freq) static int cmos_irq_set_state(struct device *dev, int enabled) { struct cmos_rtc *cmos = dev_get_drvdata(dev); - unsigned char rtc_control, rtc_intr; unsigned long flags; if (!is_valid_irq(cmos->irq)) return -ENXIO; spin_lock_irqsave(&rtc_lock, flags); - rtc_control = CMOS_READ(RTC_CONTROL); if (enabled) - rtc_control |= RTC_PIE; + cmos_irq_enable(cmos, RTC_PIE); else - rtc_control &= ~RTC_PIE; - - CMOS_WRITE(rtc_control, RTC_CONTROL); - - rtc_intr = CMOS_READ(RTC_INTR_FLAGS); - rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; - if (is_intr(rtc_intr)) - rtc_update_irq(cmos->rtc, 1, rtc_intr); + cmos_irq_disable(cmos, RTC_PIE); spin_unlock_irqrestore(&rtc_lock, flags); return 0; @@ -308,7 +386,6 @@ static int cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { struct cmos_rtc *cmos = dev_get_drvdata(dev); - unsigned char rtc_control, rtc_intr; unsigned long flags; switch (cmd) { @@ -316,51 +393,29 @@ cmos_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) case RTC_AIE_ON: case RTC_UIE_OFF: case RTC_UIE_ON: - case RTC_PIE_OFF: - case RTC_PIE_ON: if (!is_valid_irq(cmos->irq)) return -EINVAL; break; + /* PIE ON/OFF is handled by cmos_irq_set_state() */ default: return -ENOIOCTLCMD; } spin_lock_irqsave(&rtc_lock, flags); - rtc_control = CMOS_READ(RTC_CONTROL); switch (cmd) { case RTC_AIE_OFF: /* alarm off */ - rtc_control &= ~RTC_AIE; - hpet_mask_rtc_irq_bit(RTC_AIE); + cmos_irq_disable(cmos, RTC_AIE); break; case RTC_AIE_ON: /* alarm on */ - rtc_control |= RTC_AIE; - hpet_set_rtc_irq_bit(RTC_AIE); + cmos_irq_enable(cmos, RTC_AIE); break; case RTC_UIE_OFF: /* update off */ - rtc_control &= ~RTC_UIE; - hpet_mask_rtc_irq_bit(RTC_UIE); + cmos_irq_disable(cmos, RTC_UIE); break; case RTC_UIE_ON: /* update on */ - rtc_control |= RTC_UIE; - hpet_set_rtc_irq_bit(RTC_UIE); - break; - case RTC_PIE_OFF: /* periodic off */ - rtc_control &= ~RTC_PIE; - hpet_mask_rtc_irq_bit(RTC_PIE); - break; - case RTC_PIE_ON: /* periodic on */ - rtc_control |= RTC_PIE; - hpet_set_rtc_irq_bit(RTC_PIE); + cmos_irq_enable(cmos, RTC_UIE); break; } - if (!is_hpet_enabled()) - CMOS_WRITE(rtc_control, RTC_CONTROL); - - rtc_intr = CMOS_READ(RTC_INTR_FLAGS); - rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; - if (is_intr(rtc_intr)) - rtc_update_irq(cmos->rtc, 1, rtc_intr); - spin_unlock_irqrestore(&rtc_lock, flags); return 0; } @@ -502,27 +557,29 @@ static irqreturn_t cmos_interrupt(int irq, void *p) u8 rtc_control; spin_lock(&rtc_lock); - /* - * In this case it is HPET RTC interrupt handler - * calling us, with the interrupt information - * passed as arg1, instead of irq. + + /* When the HPET interrupt handler calls us, the interrupt + * status is passed as arg1 instead of the irq number. But + * always clear irq status, even when HPET is in the way. + * + * Note that HPET and RTC are almost certainly out of phase, + * giving different IRQ status ... */ + irqstat = CMOS_READ(RTC_INTR_FLAGS); + rtc_control = CMOS_READ(RTC_CONTROL); if (is_hpet_enabled()) irqstat = (unsigned long)irq & 0xF0; - else { - irqstat = CMOS_READ(RTC_INTR_FLAGS); - rtc_control = CMOS_READ(RTC_CONTROL); - irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; - } + irqstat &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; /* All Linux RTC alarms should be treated as if they were oneshot. * Similar code may be needed in system wakeup paths, in case the * alarm woke the system. */ if (irqstat & RTC_AIE) { - rtc_control = CMOS_READ(RTC_CONTROL); rtc_control &= ~RTC_AIE; CMOS_WRITE(rtc_control, RTC_CONTROL); + hpet_mask_rtc_irq_bit(RTC_AIE); + CMOS_READ(RTC_INTR_FLAGS); } spin_unlock(&rtc_lock); @@ -629,18 +686,13 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) * do something about other clock frequencies. */ cmos_rtc.rtc->irq_freq = 1024; - if (!hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq)) - CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT); + hpet_set_periodic_freq(cmos_rtc.rtc->irq_freq); + CMOS_WRITE(RTC_REF_CLCK_32KHZ | 0x06, RTC_FREQ_SELECT); + + /* disable irqs */ + cmos_irq_disable(&cmos_rtc, RTC_PIE | RTC_AIE | RTC_UIE); - /* disable irqs. - * - * NOTE after changing RTC_xIE bits we always read INTR_FLAGS; - * allegedly some older rtcs need that to handle irqs properly - */ rtc_control = CMOS_READ(RTC_CONTROL); - rtc_control &= ~(RTC_PIE | RTC_AIE | RTC_UIE); - CMOS_WRITE(rtc_control, RTC_CONTROL); - CMOS_READ(RTC_INTR_FLAGS); spin_unlock_irq(&rtc_lock); @@ -687,7 +739,7 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) goto cleanup2; } - pr_info("%s: alarms up to one %s%s\n", + pr_info("%s: alarms up to one %s%s%s\n", cmos_rtc.rtc->dev.bus_id, is_valid_irq(rtc_irq) ? (cmos_rtc.mon_alrm @@ -695,8 +747,8 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) : (cmos_rtc.day_alrm ? "month" : "day")) : "no", - cmos_rtc.century ? ", y3k" : "" - ); + cmos_rtc.century ? ", y3k" : "", + is_hpet_enabled() ? ", hpet irqs" : ""); return 0; @@ -713,13 +765,8 @@ cleanup0: static void cmos_do_shutdown(void) { - unsigned char rtc_control; - spin_lock_irq(&rtc_lock); - rtc_control = CMOS_READ(RTC_CONTROL); - rtc_control &= ~(RTC_PIE|RTC_AIE|RTC_UIE); - CMOS_WRITE(rtc_control, RTC_CONTROL); - CMOS_READ(RTC_INTR_FLAGS); + cmos_irq_disable(&cmos_rtc, RTC_IRQMASK); spin_unlock_irq(&rtc_lock); } @@ -753,24 +800,23 @@ static void __exit cmos_do_remove(struct device *dev) static int cmos_suspend(struct device *dev, pm_message_t mesg) { struct cmos_rtc *cmos = dev_get_drvdata(dev); - int do_wake = device_may_wakeup(dev); unsigned char tmp; /* only the alarm might be a wakeup event source */ spin_lock_irq(&rtc_lock); cmos->suspend_ctrl = tmp = CMOS_READ(RTC_CONTROL); if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) { - unsigned char irqstat; + unsigned char mask; - if (do_wake) - tmp &= ~(RTC_PIE|RTC_UIE); + if (device_may_wakeup(dev)) + mask = RTC_IRQMASK & ~RTC_AIE; else - tmp &= ~(RTC_PIE|RTC_AIE|RTC_UIE); + mask = RTC_IRQMASK; + tmp &= ~mask; CMOS_WRITE(tmp, RTC_CONTROL); - irqstat = CMOS_READ(RTC_INTR_FLAGS); - irqstat &= (tmp & RTC_IRQMASK) | RTC_IRQF; - if (is_intr(irqstat)) - rtc_update_irq(cmos->rtc, 1, irqstat); + hpet_mask_rtc_irq_bit(mask); + + cmos_checkintr(cmos, tmp); } spin_unlock_irq(&rtc_lock); @@ -790,13 +836,25 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg) return 0; } +/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even + * after a detour through G3 "mechanical off", although the ACPI spec + * says wakeup should only work from G1/S4 "hibernate". To most users, + * distinctions between S4 and S5 are pointless. So when the hardware + * allows, don't draw that distinction. + */ +static inline int cmos_poweroff(struct device *dev) +{ + return cmos_suspend(dev, PMSG_HIBERNATE); +} + static int cmos_resume(struct device *dev) { struct cmos_rtc *cmos = dev_get_drvdata(dev); unsigned char tmp = cmos->suspend_ctrl; /* re-enable any irqs previously active */ - if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) { + if (tmp & RTC_IRQMASK) { + unsigned char mask; if (cmos->enabled_wake) { if (cmos->wake_off) @@ -807,18 +865,28 @@ static int cmos_resume(struct device *dev) } spin_lock_irq(&rtc_lock); - CMOS_WRITE(tmp, RTC_CONTROL); - tmp = CMOS_READ(RTC_INTR_FLAGS); - tmp &= (cmos->suspend_ctrl & RTC_IRQMASK) | RTC_IRQF; - if (is_intr(tmp)) - rtc_update_irq(cmos->rtc, 1, tmp); + do { + CMOS_WRITE(tmp, RTC_CONTROL); + hpet_set_rtc_irq_bit(tmp & RTC_IRQMASK); + + mask = CMOS_READ(RTC_INTR_FLAGS); + mask &= (tmp & RTC_IRQMASK) | RTC_IRQF; + if (!is_hpet_enabled() || !is_intr(mask)) + break; + + /* force one-shot behavior if HPET blocked + * the wake alarm's irq + */ + rtc_update_irq(cmos->rtc, 1, mask); + tmp &= ~RTC_AIE; + hpet_mask_rtc_irq_bit(RTC_AIE); + } while (mask & RTC_AIE); spin_unlock_irq(&rtc_lock); } pr_debug("%s: resume, ctrl %02x\n", cmos_rtc.rtc->dev.bus_id, - cmos->suspend_ctrl); - + tmp); return 0; } @@ -826,6 +894,12 @@ static int cmos_resume(struct device *dev) #else #define cmos_suspend NULL #define cmos_resume NULL + +static inline int cmos_poweroff(struct device *dev) +{ + return -ENOSYS; +} + #endif /*----------------------------------------------------------------*/ @@ -845,10 +919,6 @@ static int cmos_resume(struct device *dev) static int __devinit cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) { - /* REVISIT paranoia argues for a shutdown notifier, since PNP - * drivers can't provide shutdown() methods to disable IRQs. - * Or better yet, fix PNP to allow those methods... - */ if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0)) /* Some machines contain a PNP entry for the RTC, but * don't define the IRQ. It should always be safe to @@ -884,6 +954,13 @@ static int cmos_pnp_resume(struct pnp_dev *pnp) #define cmos_pnp_resume NULL #endif +static void cmos_pnp_shutdown(struct device *pdev) +{ + if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(pdev)) + return; + + cmos_do_shutdown(); +} static const struct pnp_device_id rtc_ids[] = { { .id = "PNP0b00", }, @@ -903,6 +980,10 @@ static struct pnp_driver cmos_pnp_driver = { .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, .suspend = cmos_pnp_suspend, .resume = cmos_pnp_resume, + .driver = { + .name = (char *)driver_name, + .shutdown = cmos_pnp_shutdown, + } }; #endif /* CONFIG_PNP */ @@ -928,6 +1009,9 @@ static int __exit cmos_platform_remove(struct platform_device *pdev) static void cmos_platform_shutdown(struct platform_device *pdev) { + if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pdev->dev)) + return; + cmos_do_shutdown(); } |