diff options
Diffstat (limited to 'drivers/rtc/rtc-rs5c372.c')
-rw-r--r-- | drivers/rtc/rtc-rs5c372.c | 25 |
1 files changed, 20 insertions, 5 deletions
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c index c390e335559..8b561958fb1 100644 --- a/drivers/rtc/rtc-rs5c372.c +++ b/drivers/rtc/rtc-rs5c372.c @@ -1,5 +1,5 @@ /* - * An I2C driver for Ricoh RS5C372 and RV5C38[67] RTCs + * An I2C driver for Ricoh RS5C372, R2025S/D and RV5C38[67] RTCs * * Copyright (C) 2005 Pavel Mironchik <pmironchik@optifacio.net> * Copyright (C) 2006 Tower Technologies @@ -52,7 +52,8 @@ # define RS5C_CTRL1_CT4 (4 << 0) /* 1 Hz level irq */ #define RS5C_REG_CTRL2 15 # define RS5C372_CTRL2_24 (1 << 5) -# define RS5C_CTRL2_XSTP (1 << 4) +# define R2025_CTRL2_XST (1 << 5) +# define RS5C_CTRL2_XSTP (1 << 4) /* only if !R2025S/D */ # define RS5C_CTRL2_CTFG (1 << 2) # define RS5C_CTRL2_AAFG (1 << 1) /* or WAFG */ # define RS5C_CTRL2_BAFG (1 << 0) /* or DAFG */ @@ -64,6 +65,7 @@ enum rtc_type { rtc_undef = 0, + rtc_r2025sd, rtc_rs5c372a, rtc_rs5c372b, rtc_rv5c386, @@ -71,6 +73,7 @@ enum rtc_type { }; static const struct i2c_device_id rs5c372_id[] = { + { "r2025sd", rtc_r2025sd }, { "rs5c372a", rtc_rs5c372a }, { "rs5c372b", rtc_rs5c372b }, { "rv5c386", rtc_rv5c386 }, @@ -531,9 +534,15 @@ static int rs5c_oscillator_setup(struct rs5c372 *rs5c372) unsigned char buf[2]; int addr, i, ret = 0; - if (!(rs5c372->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_XSTP)) - return ret; - rs5c372->regs[RS5C_REG_CTRL2] &= ~RS5C_CTRL2_XSTP; + if (rs5c372->type == rtc_r2025sd) { + if (!(rs5c372->regs[RS5C_REG_CTRL2] & R2025_CTRL2_XST)) + return ret; + rs5c372->regs[RS5C_REG_CTRL2] &= ~R2025_CTRL2_XST; + } else { + if (!(rs5c372->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_XSTP)) + return ret; + rs5c372->regs[RS5C_REG_CTRL2] &= ~RS5C_CTRL2_XSTP; + } addr = RS5C_ADDR(RS5C_REG_CTRL1); buf[0] = rs5c372->regs[RS5C_REG_CTRL1]; @@ -546,6 +555,7 @@ static int rs5c_oscillator_setup(struct rs5c372 *rs5c372) buf[1] |= RS5C372_CTRL2_24; rs5c372->time24 = 1; break; + case rtc_r2025sd: case rtc_rv5c386: case rtc_rv5c387a: buf[0] |= RV5C387_CTRL1_24; @@ -623,6 +633,7 @@ static int rs5c372_probe(struct i2c_client *client, if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C372_CTRL2_24) rs5c372->time24 = 1; break; + case rtc_r2025sd: case rtc_rv5c386: case rtc_rv5c387a: if (rs5c372->regs[RS5C_REG_CTRL1] & RV5C387_CTRL1_24) @@ -638,6 +649,9 @@ static int rs5c372_probe(struct i2c_client *client, /* if the oscillator lost power and no other software (like * the bootloader) set it up, do it here. + * + * The R2025S/D does this a little differently than the other + * parts, so we special case that.. */ err = rs5c_oscillator_setup(rs5c372); if (unlikely(err < 0)) { @@ -650,6 +664,7 @@ static int rs5c372_probe(struct i2c_client *client, dev_info(&client->dev, "%s found, %s, driver version " DRV_VERSION "\n", ({ char *s; switch (rs5c372->type) { + case rtc_r2025sd: s = "r2025sd"; break; case rtc_rs5c372a: s = "rs5c372a"; break; case rtc_rs5c372b: s = "rs5c372b"; break; case rtc_rv5c386: s = "rv5c386"; break; |