diff options
Diffstat (limited to 'drivers/rtc')
| -rw-r--r-- | drivers/rtc/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/rtc/rtc-sa1100.c | 300 |
2 files changed, 184 insertions, 118 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 53eb4e55b28..877cf6fdcf2 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -774,7 +774,7 @@ config RTC_DRV_EP93XX config RTC_DRV_SA1100 tristate "SA11x0/PXA2xx" - depends on ARCH_SA1100 || ARCH_PXA + depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP help If you say Y here you will get access to the real time clock built into your SA11x0 or PXA2xx CPU. diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 0b40bb88a88..fc1ffe97fca 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -27,35 +27,42 @@ #include <linux/init.h> #include <linux/fs.h> #include <linux/interrupt.h> -#include <linux/string.h> #include <linux/pm.h> -#include <linux/bitops.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/io.h> #include <mach/hardware.h> #include <asm/irq.h> -#ifdef CONFIG_ARCH_PXA -#include <mach/regs-rtc.h> -#include <mach/regs-ost.h> -#endif - #define RTC_DEF_DIVIDER (32768 - 1) #define RTC_DEF_TRIM 0 - -static const unsigned long RTC_FREQ = 1024; -static struct rtc_time rtc_alarm; -static DEFINE_SPINLOCK(sa1100_rtc_lock); - -static inline int rtc_periodic_alarm(struct rtc_time *tm) -{ - return (tm->tm_year == -1) || - ((unsigned)tm->tm_mon >= 12) || - ((unsigned)(tm->tm_mday - 1) >= 31) || - ((unsigned)tm->tm_hour > 23) || - ((unsigned)tm->tm_min > 59) || - ((unsigned)tm->tm_sec > 59); -} - +#define RTC_FREQ 1024 + +#define RCNR 0x00 /* RTC Count Register */ +#define RTAR 0x04 /* RTC Alarm Register */ +#define RTSR 0x08 /* RTC Status Register */ +#define RTTR 0x0c /* RTC Timer Trim Register */ + +#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ +#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ +#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ +#define RTSR_AL (1 << 0) /* RTC alarm detected */ + +#define rtc_readl(sa1100_rtc, reg) \ + readl_relaxed((sa1100_rtc)->base + (reg)) +#define rtc_writel(sa1100_rtc, reg, value) \ + writel_relaxed((value), (sa1100_rtc)->base + (reg)) + +struct sa1100_rtc { + struct resource *ress; + void __iomem *base; + struct clk *clk; + int irq_1Hz; + int irq_Alrm; + struct rtc_device *rtc; + spinlock_t lock; /* Protects this structure */ +}; /* * Calculate the next alarm time given the requested alarm time mask * and the current time. @@ -83,46 +90,26 @@ static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, } } -static int rtc_update_alarm(struct rtc_time *alrm) -{ - struct rtc_time alarm_tm, now_tm; - unsigned long now, time; - int ret; - - do { - now = RCNR; - rtc_time_to_tm(now, &now_tm); - rtc_next_alarm_time(&alarm_tm, &now_tm, alrm); - ret = rtc_tm_to_time(&alarm_tm, &time); - if (ret != 0) - break; - - RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL); - RTAR = time; - } while (now != RCNR); - - return ret; -} - static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) { struct platform_device *pdev = to_platform_device(dev_id); - struct rtc_device *rtc = platform_get_drvdata(pdev); + struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev); unsigned int rtsr; unsigned long events = 0; - spin_lock(&sa1100_rtc_lock); + spin_lock(&sa1100_rtc->lock); - rtsr = RTSR; /* clear interrupt sources */ - RTSR = 0; + rtsr = rtc_readl(sa1100_rtc, RTSR); + rtc_writel(sa1100_rtc, RTSR, 0); + /* Fix for a nasty initialization problem the in SA11xx RTSR register. * See also the comments in sa1100_rtc_probe(). */ if (rtsr & (RTSR_ALE | RTSR_HZE)) { /* This is the original code, before there was the if test * above. This code does not clear interrupts that were not * enabled. */ - RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2); + rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ) & (rtsr >> 2)); } else { /* For some reason, it is possible to enter this routine * without interruptions enabled, it has been tested with @@ -131,13 +118,13 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) * This situation leads to an infinite "loop" of interrupt * routine calling and as a result the processor seems to * lock on its first call to open(). */ - RTSR = RTSR_AL | RTSR_HZ; + rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ)); } /* clear alarm interrupt if it has occurred */ if (rtsr & RTSR_AL) rtsr &= ~RTSR_ALE; - RTSR = rtsr & (RTSR_ALE | RTSR_HZE); + rtc_writel(sa1100_rtc, RTSR, rtsr & (RTSR_ALE | RTSR_HZE)); /* update irq data & counter */ if (rtsr & RTSR_AL) @@ -145,91 +132,100 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) if (rtsr & RTSR_HZ) events |= RTC_UF | RTC_IRQF; - rtc_update_irq(rtc, 1, events); + rtc_update_irq(sa1100_rtc->rtc, 1, events); - if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm)) - rtc_update_alarm(&rtc_alarm); - - spin_unlock(&sa1100_rtc_lock); + spin_unlock(&sa1100_rtc->lock); return IRQ_HANDLED; } static int sa1100_rtc_open(struct device *dev) { + struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); int ret; - struct platform_device *plat_dev = to_platform_device(dev); - struct rtc_device *rtc = platform_get_drvdata(plat_dev); - ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED, - "rtc 1Hz", dev); + ret = request_irq(sa1100_rtc->irq_1Hz, sa1100_rtc_interrupt, + IRQF_DISABLED, "rtc 1Hz", dev); if (ret) { - dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz); + dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_1Hz); goto fail_ui; } - ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED, - "rtc Alrm", dev); + ret = request_irq(sa1100_rtc->irq_Alrm, sa1100_rtc_interrupt, + IRQF_DISABLED, "rtc Alrm", dev); if (ret) { - dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm); + dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_Alrm); goto fail_ai; } - rtc->max_user_freq = RTC_FREQ; - rtc_irq_set_freq(rtc, NULL, RTC_FREQ); + sa1100_rtc->rtc->max_user_freq = RTC_FREQ; + rtc_irq_set_freq(sa1100_rtc->rtc, NULL, RTC_FREQ); return 0; fail_ai: - free_irq(IRQ_RTC1Hz, dev); + free_irq(sa1100_rtc->irq_1Hz, dev); fail_ui: return ret; } static void sa1100_rtc_release(struct device *dev) { - spin_lock_irq(&sa1100_rtc_lock); - RTSR = 0; - OIER &= ~OIER_E1; - OSSR = OSSR_M1; - spin_unlock_irq(&sa1100_rtc_lock); - - free_irq(IRQ_RTCAlrm, dev); - free_irq(IRQ_RTC1Hz, dev); + struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + + spin_lock_irq(&sa1100_rtc->lock); + rtc_writel(sa1100_rtc, RTSR, 0); + spin_unlock_irq(&sa1100_rtc->lock); + + free_irq(sa1100_rtc->irq_Alrm, dev); + free_irq(sa1100_rtc->irq_1Hz, dev); } static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) { - spin_lock_irq(&sa1100_rtc_lock); + struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + unsigned int rtsr; + + spin_lock_irq(&sa1100_rtc->lock); + + rtsr = rtc_readl(sa1100_rtc, RTSR); if (enabled) - RTSR |= RTSR_ALE; + rtsr |= RTSR_ALE; else - RTSR &= ~RTSR_ALE; - spin_unlock_irq(&sa1100_rtc_lock); + rtsr &= ~RTSR_ALE; + rtc_writel(sa1100_rtc, RTSR, rtsr); + + spin_unlock_irq(&sa1100_rtc->lock); return 0; } static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm) { - rtc_time_to_tm(RCNR, tm); + struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + + rtc_time_to_tm(rtc_readl(sa1100_rtc, RCNR), tm); return 0; } static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm) { + struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); unsigned long time; int ret; ret = rtc_tm_to_time(tm, &time); if (ret == 0) - RCNR = time; + rtc_writel(sa1100_rtc, RCNR, time); return ret; } static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - u32 rtsr; + struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + unsigned long time; + unsigned int rtsr; - memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time)); - rtsr = RTSR; + time = rtc_readl(sa1100_rtc, RCNR); + rtc_time_to_tm(time, &alrm->time); + rtsr = rtc_readl(sa1100_rtc, RTSR); alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0; alrm->pending = (rtsr & RTSR_AL) ? 1 : 0; return 0; @@ -237,26 +233,39 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - int ret; + struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + struct rtc_time now_tm, alarm_tm; + unsigned long time, alarm; + unsigned int rtsr; - spin_lock_irq(&sa1100_rtc_lock); - ret = rtc_update_alarm(&alrm->time); - if (ret == 0) { - if (alrm->enabled) - RTSR |= RTSR_ALE; - else - RTSR &= ~RTSR_ALE; - } - spin_unlock_irq(&sa1100_rtc_lock); + spin_lock_irq(&sa1100_rtc->lock); - return ret; + time = rtc_readl(sa1100_rtc, RCNR); + rtc_time_to_tm(time, &now_tm); + rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time); + rtc_tm_to_time(&alarm_tm, &alarm); + rtc_writel(sa1100_rtc, RTAR, alarm); + + rtsr = rtc_readl(sa1100_rtc, RTSR); + if (alrm->enabled) + rtsr |= RTSR_ALE; + else + rtsr &= ~RTSR_ALE; + rtc_writel(sa1100_rtc, RTSR, rtsr); + + spin_unlock_irq(&sa1100_rtc->lock); + + return 0; } static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq) { - seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR); - seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR); + struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + seq_printf(seq, "trim/divider\t\t: 0x%08x\n", + rtc_readl(sa1100_rtc, RTTR)); + seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", + rtc_readl(sa1100_rtc, RTSR)); return 0; } @@ -273,7 +282,51 @@ static const struct rtc_class_ops sa1100_rtc_ops = { static int sa1100_rtc_probe(struct platform_device *pdev) { - struct rtc_device *rtc; + struct sa1100_rtc *sa1100_rtc; + unsigned int rttr; + int ret; + + sa1100_rtc = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL); + if (!sa1100_rtc) + return -ENOMEM; + + spin_lock_init(&sa1100_rtc->lock); + platform_set_drvdata(pdev, sa1100_rtc); + + ret = -ENXIO; + sa1100_rtc->ress = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!sa1100_rtc->ress) { + dev_err(&pdev->dev, "No I/O memory resource defined\n"); + goto err_ress; + } + + sa1100_rtc->irq_1Hz = platform_get_irq(pdev, 0); + if (sa1100_rtc->irq_1Hz < 0) { + dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n"); + goto err_ress; + } + sa1100_rtc->irq_Alrm = platform_get_irq(pdev, 1); + if (sa1100_rtc->irq_Alrm < 0) { + dev_err(&pdev->dev, "No alarm IRQ resource defined\n"); + goto err_ress; + } + + ret = -ENOMEM; + sa1100_rtc->base = ioremap(sa1100_rtc->ress->start, + resource_size(sa1100_rtc->ress)); + if (!sa1100_rtc->base) { + dev_err(&pdev->dev, "Unable to map pxa RTC I/O memory\n"); + goto err_map; + } + + sa1100_rtc->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(sa1100_rtc->clk)) { + dev_err(&pdev->dev, "failed to find rtc clock source\n"); + ret = PTR_ERR(sa1100_rtc->clk); + goto err_clk; + } + clk_prepare(sa1100_rtc->clk); + clk_enable(sa1100_rtc->clk); /* * According to the manual we should be able to let RTTR be zero @@ -282,24 +335,24 @@ static int sa1100_rtc_probe(struct platform_device *pdev) * If the clock divider is uninitialized then reset it to the * default value to get the 1Hz clock. */ - if (RTTR == 0) { - RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16); - dev_warn(&pdev->dev, "warning: " - "initializing default clock divider/trim value\n"); + if (rtc_readl(sa1100_rtc, RTTR) == 0) { + rttr = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16); + rtc_writel(sa1100_rtc, RTTR, rttr); + dev_warn(&pdev->dev, "warning: initializing default clock" + " divider/trim value\n"); /* The current RTC value probably doesn't make sense either */ - RCNR = 0; + rtc_writel(sa1100_rtc, RCNR, 0); } device_init_wakeup(&pdev->dev, 1); - rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops, - THIS_MODULE); - - if (IS_ERR(rtc)) - return PTR_ERR(rtc); - - platform_set_drvdata(pdev, rtc); - + sa1100_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, + &sa1100_rtc_ops, THIS_MODULE); + if (IS_ERR(sa1100_rtc->rtc)) { + dev_err(&pdev->dev, "Failed to register RTC device -> %d\n", + ret); + goto err_rtc_reg; + } /* Fix for a nasty initialization problem the in SA11xx RTSR register. * See also the comments in sa1100_rtc_interrupt(). * @@ -322,33 +375,46 @@ static int sa1100_rtc_probe(struct platform_device *pdev) * * Notice that clearing bit 1 and 0 is accomplished by writting ONES to * the corresponding bits in RTSR. */ - RTSR = RTSR_AL | RTSR_HZ; + rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ)); return 0; + +err_rtc_reg: +err_clk: + iounmap(sa1100_rtc->base); +err_ress: +err_map: + kfree(sa1100_rtc); + return ret; } static int sa1100_rtc_remove(struct platform_device *pdev) { - struct rtc_device *rtc = platform_get_drvdata(pdev); - - if (rtc) - rtc_device_unregister(rtc); + struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev); + rtc_device_unregister(sa1100_rtc->rtc); + clk_disable(sa1100_rtc->clk); + clk_unprepare(sa1100_rtc->clk); + iounmap(sa1100_rtc->base); return 0; } #ifdef CONFIG_PM static int sa1100_rtc_suspend(struct device *dev) { + struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + if (device_may_wakeup(dev)) - enable_irq_wake(IRQ_RTCAlrm); + enable_irq_wake(sa1100_rtc->irq_Alrm); return 0; } static int sa1100_rtc_resume(struct device *dev) { + struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + if (device_may_wakeup(dev)) - disable_irq_wake(IRQ_RTCAlrm); + disable_irq_wake(sa1100_rtc->irq_Alrm); return 0; } |