diff options
Diffstat (limited to 'drivers/rtc')
| -rw-r--r-- | drivers/rtc/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/rtc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/rtc/class.c | 13 | ||||
| -rw-r--r-- | drivers/rtc/interface.c | 574 | ||||
| -rw-r--r-- | drivers/rtc/rtc-cmos.c | 19 | ||||
| -rw-r--r-- | drivers/rtc/rtc-dev.c | 104 | ||||
| -rw-r--r-- | drivers/rtc/rtc-ds1305.c | 2 | ||||
| -rw-r--r-- | drivers/rtc/rtc-ds1307.c | 12 | ||||
| -rw-r--r-- | drivers/rtc/rtc-ds1374.c | 2 | ||||
| -rw-r--r-- | drivers/rtc/rtc-ds3232.c | 2 | ||||
| -rw-r--r-- | drivers/rtc/rtc-lib.c | 28 | ||||
| -rw-r--r-- | drivers/rtc/rtc-max6902.c | 3 | ||||
| -rw-r--r-- | drivers/rtc/rtc-mrst.c | 582 | ||||
| -rw-r--r-- | drivers/rtc/rtc-omap.c | 6 | ||||
| -rw-r--r-- | drivers/rtc/rtc-rx8025.c | 2 | ||||
| -rw-r--r-- | drivers/rtc/rtc-sa1100.c | 161 |
16 files changed, 1139 insertions, 384 deletions
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 2883428d5ac..4941cade319 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -463,6 +463,18 @@ config RTC_DRV_CMOS This driver can also be built as a module. If so, the module will be called rtc-cmos. +config RTC_DRV_VRTC + tristate "Virtual RTC for Moorestown platforms" + depends on X86_MRST + default y if X86_MRST + + help + Say "yes" here to get direct support for the real time clock + found on Moorestown platforms. The VRTC is a emulated RTC that + derives its clock source from a real RTC in the PMIC. The MC146818 + style programming interface is mostly conserved, but any + updates are done via IPC calls to the system controller FW. + config RTC_DRV_DS1216 tristate "Dallas DS1216" depends on SNI_RM diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 4c2832df469..2afdaf3ff98 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o obj-$(CONFIG_RTC_DRV_COH901331) += rtc-coh901331.o obj-$(CONFIG_RTC_DRV_DAVINCI) += rtc-davinci.o obj-$(CONFIG_RTC_DRV_DM355EVM) += rtc-dm355evm.o +obj-$(CONFIG_RTC_DRV_VRTC) += rtc-mrst.o obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o obj-$(CONFIG_RTC_DRV_DS1286) += rtc-ds1286.o obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c index e6539cbabb3..9583cbcc6b7 100644 --- a/drivers/rtc/class.c +++ b/drivers/rtc/class.c @@ -16,6 +16,7 @@ #include <linux/kdev_t.h> #include <linux/idr.h> #include <linux/slab.h> +#include <linux/workqueue.h> #include "rtc-core.h" @@ -152,6 +153,18 @@ struct rtc_device *rtc_device_register(const char *name, struct device *dev, spin_lock_init(&rtc->irq_task_lock); init_waitqueue_head(&rtc->irq_queue); + /* Init timerqueue */ + timerqueue_init_head(&rtc->timerqueue); + INIT_WORK(&rtc->irqwork, rtc_timer_do_work); + /* Init aie timer */ + rtc_timer_init(&rtc->aie_timer, rtc_aie_update_irq, (void *)rtc); + /* Init uie timer */ + rtc_timer_init(&rtc->uie_rtctimer, rtc_uie_update_irq, (void *)rtc); + /* Init pie timer */ + hrtimer_init(&rtc->pie_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + rtc->pie_timer.function = rtc_pie_update_irq; + rtc->pie_enabled = 0; + strlcpy(rtc->name, name, RTC_DEVICE_NAME_SIZE); dev_set_name(&rtc->dev, "rtc%d", id); diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index a0c816238aa..90384b9f6b2 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -14,15 +14,11 @@ #include <linux/rtc.h> #include <linux/sched.h> #include <linux/log2.h> +#include <linux/workqueue.h> -int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm) +static int __rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm) { int err; - - err = mutex_lock_interruptible(&rtc->ops_lock); - if (err) - return err; - if (!rtc->ops) err = -ENODEV; else if (!rtc->ops->read_time) @@ -31,7 +27,18 @@ int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm) memset(tm, 0, sizeof(struct rtc_time)); err = rtc->ops->read_time(rtc->dev.parent, tm); } + return err; +} + +int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm) +{ + int err; + err = mutex_lock_interruptible(&rtc->ops_lock); + if (err) + return err; + + err = __rtc_read_time(rtc, tm); mutex_unlock(&rtc->ops_lock); return err; } @@ -106,188 +113,54 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs) } EXPORT_SYMBOL_GPL(rtc_set_mmss); -static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *alarm) +int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) { int err; err = mutex_lock_interruptible(&rtc->ops_lock); if (err) return err; - - if (rtc->ops == NULL) - err = -ENODEV; - else if (!rtc->ops->read_alarm) - err = -EINVAL; - else { - memset(alarm, 0, sizeof(struct rtc_wkalrm)); - err = rtc->ops->read_alarm(rtc->dev.parent, alarm); - } - + alarm->enabled = rtc->aie_timer.enabled; + if (alarm->enabled) + alarm->time = rtc_ktime_to_tm(rtc->aie_timer.node.expires); mutex_unlock(&rtc->ops_lock); - return err; + + return 0; } +EXPORT_SYMBOL_GPL(rtc_read_alarm); -int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) +int __rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) { + struct rtc_time tm; + long now, scheduled; int err; - struct rtc_time before, now; - int first_time = 1; - unsigned long t_now, t_alm; - enum { none, day, month, year } missing = none; - unsigned days; - - /* The lower level RTC driver may return -1 in some fields, - * creating invalid alarm->time values, for reasons like: - * - * - The hardware may not be capable of filling them in; - * many alarms match only on time-of-day fields, not - * day/month/year calendar data. - * - * - Some hardware uses illegal values as "wildcard" match - * values, which non-Linux firmware (like a BIOS) may try - * to set up as e.g. "alarm 15 minutes after each hour". - * Linux uses only oneshot alarms. - * - * When we see that here, we deal with it by using values from - * a current RTC timestamp for any missing (-1) values. The - * RTC driver prevents "periodic alarm" modes. - * - * But this can be racey, because some fields of the RTC timestamp - * may have wrapped in the interval since we read the RTC alarm, - * which would lead to us inserting inconsistent values in place - * of the -1 fields. - * - * Reading the alarm and timestamp in the reverse sequence - * would have the same race condition, and not solve the issue. - * - * So, we must first read the RTC timestamp, - * then read the RTC alarm value, - * and then read a second RTC timestamp. - * - * If any fields of the second timestamp have changed - * when compared with the first timestamp, then we know - * our timestamp may be inconsistent with that used by - * the low-level rtc_read_alarm_internal() function. - * - * So, when the two timestamps disagree, we just loop and do - * the process again to get a fully consistent set of values. - * - * This could all instead be done in the lower level driver, - * but since more than one lower level RTC implementation needs it, - * then it's probably best best to do it here instead of there.. - */ - /* Get the "before" timestamp */ - err = rtc_read_time(rtc, &before); - if (err < 0) + err = rtc_valid_tm(&alarm->time); + if (err) return err; - do { - if (!first_time) - memcpy(&before, &now, sizeof(struct rtc_time)); - first_time = 0; - - /* get the RTC alarm values, which may be incomplete */ - err = rtc_read_alarm_internal(rtc, alarm); - if (err) - return err; - if (!alarm->enabled) - return 0; - - /* full-function RTCs won't have such missing fields */ - if (rtc_valid_tm(&alarm->time) == 0) - return 0; - - /* get the "after" timestamp, to detect wrapped fields */ - err = rtc_read_time(rtc, &now); - if (err < 0) - return err; - - /* note that tm_sec is a "don't care" value here: */ - } while ( before.tm_min != now.tm_min - || before.tm_hour != now.tm_hour - || before.tm_mon != now.tm_mon - || before.tm_year != now.tm_year); - - /* Fill in the missing alarm fields using the timestamp; we - * know there's at least one since alarm->time is invalid. - */ - if (alarm->time.tm_sec == -1) - alarm->time.tm_sec = now.tm_sec; - if (alarm->time.tm_min == -1) - alarm->time.tm_min = now.tm_min; - if (alarm->time.tm_hour == -1) - alarm->time.tm_hour = now.tm_hour; - - /* For simplicity, only support date rollover for now */ - if (alarm->time.tm_mday == -1) { - alarm->time.tm_mday = now.tm_mday; - missing = day; - } - if (alarm->time.tm_mon == -1) { - alarm->time.tm_mon = now.tm_mon; - if (missing == none) - missing = month; - } - if (alarm->time.tm_year == -1) { - alarm->time.tm_year = now.tm_year; - if (missing == none) - missing = year; - } - - /* with luck, no rollover is needed */ - rtc_tm_to_time(&now, &t_now); - rtc_tm_to_time(&alarm->time, &t_alm); - if (t_now < t_alm) - goto done; - - switch (missing) { + rtc_tm_to_time(&alarm->time, &scheduled); - /* 24 hour rollover ... if it's now 10am Monday, an alarm that - * that will trigger at 5am will do so at 5am Tuesday, which - * could also be in the next month or year. This is a common - * case, especially for PCs. - */ - case day: - dev_dbg(&rtc->dev, "alarm rollover: %s\n", "day"); - t_alm += 24 * 60 * 60; - rtc_time_to_tm(t_alm, &alarm->time); - break; - - /* Month rollover ... if it's the 31th, an alarm on the 3rd will - * be next month. An alarm matching on the 30th, 29th, or 28th - * may end up in the month after that! Many newer PCs support - * this type of alarm. + /* Make sure we're not setting alarms in the past */ + err = __rtc_read_time(rtc, &tm); + rtc_tm_to_time(&tm, &now); + if (scheduled <= now) + return -ETIME; + /* + * XXX - We just checked to make sure the alarm time is not + * in the past, but there is still a race window where if + * the is alarm set for the next second and the second ticks + * over right here, before we set the alarm. */ - case month: - dev_dbg(&rtc->dev, "alarm rollover: %s\n", "month"); - do { - if (alarm->time.tm_mon < 11) - alarm->time.tm_mon++; - else { - alarm->time.tm_mon = 0; - alarm->time.tm_year++; - } - days = rtc_month_days(alarm->time.tm_mon, - alarm->time.tm_year); - } while (days < alarm->time.tm_mday); - break; - - /* Year rollover ... easy except for leap years! */ - case year: - dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year"); - do { - alarm->time.tm_year++; - } while (rtc_valid_tm(&alarm->time) != 0); - break; - - default: - dev_warn(&rtc->dev, "alarm rollover not handled\n"); - } -done: - return 0; + if (!rtc->ops) + err = -ENODEV; + else if (!rtc->ops->set_alarm) + err = -EINVAL; + else + err = rtc->ops->set_alarm(rtc->dev.parent, alarm); + + return err; } -EXPORT_SYMBOL_GPL(rtc_read_alarm); int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) { @@ -300,16 +173,18 @@ int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) err = mutex_lock_interruptible(&rtc->ops_lock); if (err) return err; - - if (!rtc->ops) - err = -ENODEV; - else if (!rtc->ops->set_alarm) - err = -EINVAL; - else - err = rtc->ops->set_alarm(rtc->dev.parent, alarm); - + if (rtc->aie_timer.enabled) { + rtc_timer_remove(rtc, &rtc->aie_timer); + rtc->aie_timer.enabled = 0; + } + rtc->aie_timer.node.expires = rtc_tm_to_ktime(alarm->time); + rtc->aie_timer.period = ktime_set(0, 0); + if (alarm->enabled) { + rtc->aie_timer.enabled = 1; + rtc_timer_enqueue(rtc, &rtc->aie_timer); + } mutex_unlock(&rtc->ops_lock); - return err; + return 0; } EXPORT_SYMBOL_GPL(rtc_set_alarm); @@ -319,6 +194,16 @@ int rtc_alarm_irq_enable(struct rtc_device *rtc, unsigned int enabled) if (err) return err; + if (rtc->aie_timer.enabled != enabled) { + if (enabled) { + rtc->aie_timer.enabled = 1; + rtc_timer_enqueue(rtc, &rtc->aie_timer); + } else { + rtc_timer_remove(rtc, &rtc->aie_timer); + rtc->aie_timer.enabled = 0; + } + } + if (!rtc->ops) err = -ENODEV; else if (!rtc->ops->alarm_irq_enable) @@ -337,52 +222,53 @@ int rtc_update_irq_enable(struct rtc_device *rtc, unsigned int enabled) if (err) return err; -#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL - if (enabled == 0 && rtc->uie_irq_active) { - mutex_unlock(&rtc->ops_lock); - return rtc_dev_update_irq_enable_emul(rtc, enabled); + /* make sure we're changing state */ + if (rtc->uie_rtctimer.enabled == enabled) + goto out; + + if (enabled) { + struct rtc_time tm; + ktime_t now, onesec; + + __rtc_read_time(rtc, &tm); + onesec = ktime_set(1, 0); + now = rtc_tm_to_ktime(tm); + rtc->uie_rtctimer.node.expires = ktime_add(now, onesec); + rtc->uie_rtctimer.period = ktime_set(1, 0); + rtc->uie_rtctimer.enabled = 1; + rtc_timer_enqueue(rtc, &rtc->uie_rtctimer); + } else { + rtc_timer_remove(rtc, &rtc->uie_rtctimer); + rtc->uie_rtctimer.enabled = 0; } -#endif - - if (!rtc->ops) - err = -ENODEV; - else if (!rtc->ops->update_irq_enable) - err = -EINVAL; - else - err = rtc->ops->update_irq_enable(rtc->dev.parent, enabled); +out: mutex_unlock(&rtc->ops_lock); - -#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL - /* - * Enable emulation if the driver did not provide - * the update_irq_enable function pointer or if returned - * -EINVAL to signal that it has been configured without - * interrupts or that are not available at the moment. - */ - if (err == -EINVAL) - err = rtc_dev_update_irq_enable_emul(rtc, enabled); -#endif return err; + } EXPORT_SYMBOL_GPL(rtc_update_irq_enable); + /** - * rtc_update_irq - report RTC periodic, alarm, and/or update irqs - * @rtc: the rtc device - * @num: how many irqs are being reported (usually one) - * @events: mask of RTC_IRQF with one or more of RTC_PF, RTC_AF, RTC_UF - * Context: any + * rtc_handle_legacy_irq - AIE, UIE and PIE event hook + * @rtc: pointer to the rtc device + * + * This function is called when an AIE, UIE or PIE mode interrupt + * has occured (or been emulated). + * + * Triggers the registered irq_task function callback. */ -void rtc_update_irq(struct rtc_device *rtc, - unsigned long num, unsigned long events) +static void rtc_handle_legacy_irq(struct rtc_device *rtc, int num, int mode) { unsigned long flags; + /* mark one irq of the appropriate mode */ spin_lock_irqsave(&rtc->irq_lock, flags); - rtc->irq_data = (rtc->irq_data + (num << 8)) | events; + rtc->irq_data = (rtc->irq_data + (num << 8)) | (RTC_IRQF|mode); spin_unlock_irqrestore(&rtc->irq_lock, flags); + /* call the task func */ spin_lock_irqsave(&rtc->irq_task_lock, flags); if (rtc->irq_task) rtc->irq_task->func(rtc->irq_task->private_data); @@ -391,6 +277,69 @@ void rtc_update_irq(struct rtc_device *rtc, wake_up_interruptible(&rtc->irq_queue); kill_fasync(&rtc->async_queue, SIGIO, POLL_IN); } + + +/** + * rtc_aie_update_irq - AIE mode rtctimer hook + * @private: pointer to the rtc_device + * + * This functions is called when the aie_timer expires. + */ +void rtc_aie_update_irq(void *private) +{ + struct rtc_device *rtc = (struct rtc_device *)private; + rtc_handle_legacy_irq(rtc, 1, RTC_AF); +} + + +/** + * rtc_uie_update_irq - UIE mode rtctimer hook + * @private: pointer to the rtc_device + * + * This functions is called when the uie_timer expires. + */ +void rtc_uie_update_irq(void *private) +{ + struct rtc_device *rtc = (struct rtc_device *)private; + rtc_handle_legacy_irq(rtc, 1, RTC_UF); +} + + +/** + * rtc_pie_update_irq - PIE mode hrtimer hook + * @timer: pointer to the pie mode hrtimer + * + * This function is used to emulate PIE mode interrupts + * using an hrtimer. This function is called when the periodic + * hrtimer expires. + */ +enum hrtimer_restart rtc_pie_update_irq(struct hrtimer *timer) +{ + struct rtc_device *rtc; + ktime_t period; + int count; + rtc = container_of(timer, struct rtc_device, pie_timer); + + period = ktime_set(0, NSEC_PER_SEC/rtc->irq_freq); + count = hrtimer_forward_now(timer, period); + + rtc_handle_legacy_irq(rtc, count, RTC_PF); + + return HRTIMER_RESTART; +} + +/** + * rtc_update_irq - Triggered when a RTC interrupt occurs. + * @rtc: the rtc device + * @num: how many irqs are being reported (usually one) + * @events: mask of RTC_IRQF with one or more of RTC_PF, RTC_AF, RTC_UF + * Context: any + */ +void rtc_update_irq(struct rtc_device *rtc, + unsigned long num, unsigned long events) +{ + schedule_work(&rtc->irqwork); +} EXPORT_SYMBOL_GPL(rtc_update_irq); static int __rtc_match(struct device *dev, void *data) @@ -477,18 +426,20 @@ int rtc_irq_set_state(struct rtc_device *rtc, struct rtc_task *task, int enabled int err = 0; unsigned long flags; - if (rtc->ops->irq_set_state == NULL) - return -ENXIO; - spin_lock_irqsave(&rtc->irq_task_lock, flags); if (rtc->irq_task != NULL && task == NULL) err = -EBUSY; if (rtc->irq_task != task) err = -EACCES; - spin_unlock_irqrestore(&rtc->irq_task_lock, flags); - if (err == 0) - err = rtc->ops->irq_set_state(rtc->dev.parent, enabled); + if (enabled) { + ktime_t period = ktime_set(0, NSEC_PER_SEC/rtc->irq_freq); + hrtimer_start(&rtc->pie_timer, period, HRTIMER_MODE_REL); + } else { + hrtimer_cancel(&rtc->pie_timer); + } + rtc->pie_enabled = enabled; + spin_unlock_irqrestore(&rtc->irq_task_lock, flags); return err; } @@ -509,21 +460,194 @@ int rtc_irq_set_freq(struct rtc_device *rtc, struct rtc_task *task, int freq) int err = 0; unsigned long flags; - if (rtc->ops->irq_set_freq == NULL) - return -ENXIO; - spin_lock_irqsave(&rtc->irq_task_lock, flags); if (rtc->irq_task != NULL && task == NULL) err = -EBUSY; if (rtc->irq_task != task) err = -EACCES; - spin_unlock_irqrestore(&rtc->irq_task_lock, flags); - if (err == 0) { - err = rtc->ops->irq_set_freq(rtc->dev.parent, freq); - if (err == 0) - rtc->irq_freq = freq; + rtc->irq_freq = freq; + if (rtc->pie_enabled) { + ktime_t period; + hrtimer_cancel(&rtc->pie_timer); + period = ktime_set(0, NSEC_PER_SEC/rtc->irq_freq); + hrtimer_start(&rtc->pie_timer, period, + HRTIMER_MODE_REL); + } } + spin_unlock_irqrestore(&rtc->irq_task_lock, flags); return err; } EXPORT_SYMBOL_GPL(rtc_irq_set_freq); + +/** + * rtc_timer_enqueue - Adds a rtc_timer to the rtc_device timerqueue + * @rtc rtc device + * @timer timer being added. + * + * Enqueues a timer onto the rtc devices timerqueue and sets + * the next alarm event appropriately. + * + * Must hold ops_lock for proper serialization of timerqueue + */ +void rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer) +{ + timerqueue_add(&rtc->timerqueue, &timer->node); + if (&timer->node == timerqueue_getnext(&rtc->timerqueue)) { + struct rtc_wkalrm alarm; + int err; + alarm.time = rtc_ktime_to_tm(timer->node.expires); + alarm.enabled = 1; + err = __rtc_set_alarm(rtc, &alarm); + if (err == -ETIME) + schedule_work(&rtc->irqwork); + } +} + +/** + * rtc_timer_remove - Removes a rtc_timer from the rtc_device timerqueue + * @rtc rtc device + * @timer timer being removed. + * + * Removes a timer onto the rtc devices timerqueue and sets + * the next alarm event appropriately. + * + * Must hold ops_lock for proper serialization of timerqueue + */ +void rtc_timer_remove(struct rtc_device *rtc, struct rtc_timer *timer) +{ + struct timerqueue_node *next = timerqueue_getnext(&rtc->timerqueue); + timerqueue_del(&rtc->timerqueue, &timer->node); + + if (next == &timer->node) { + struct rtc_wkalrm alarm; + int err; + next = timerqueue_getnext(&rtc->timerqueue); + if (!next) + return; + alarm.time = rtc_ktime_to_tm(next->expires); + alarm.enabled = 1; + err = __rtc_set_alarm(rtc, &alarm); + if (err == -ETIME) + schedule_work(&rtc->irqwork); + } +} + +/** + * rtc_timer_do_work - Expires rtc timers + * @rtc rtc device + * @timer timer being removed. + * + * Expires rtc timers. Reprograms next alarm event if needed. + * Called via worktask. + * + * Serializes access to timerqueue via ops_lock mutex + */ +void rtc_timer_do_work(struct work_struct *work) +{ + struct rtc_timer *timer; + struct timerqueue_node *next; + ktime_t now; + struct rtc_time tm; + + struct rtc_device *rtc = + container_of(work, struct rtc_device, irqwork); + + mutex_lock(&rtc->ops_lock); +again: + __rtc_read_time(rtc, &tm); + now = rtc_tm_to_ktime(tm); + while ((next = timerqueue_getnext(&rtc->timerqueue))) { + if (next->expires.tv64 > now.tv64) + break; + + /* expire timer */ + timer = container_of(next, struct rtc_timer, node); + timerqueue_del(&rtc->timerqueue, &timer->node); + timer->enabled = 0; + if (timer->task.func) + timer->task.func(timer->task.private_data); + + /* Re-add/fwd periodic timers */ + if (ktime_to_ns(timer->period)) { + timer->node.expires = ktime_add(timer->node.expires, + timer->period); + timer->enabled = 1; + timerqueue_add(&rtc->timerqueue, &timer->node); + } + } + + /* Set next alarm */ + if (next) { + struct rtc_wkalrm alarm; + int err; + alarm.time = rtc_ktime_to_tm(next->expires); + alarm.enabled = 1; + err = __rtc_set_alarm(rtc, &alarm); + if (err == -ETIME) + goto again; + } + + mutex_unlock(&rtc->ops_lock); +} + + +/* rtc_timer_init - Initializes an rtc_timer + * @timer: timer to be intiialized + * @f: function pointer to be called when timer fires + * @data: private data passed to function pointer + * + * Kernel interface to initializing an rtc_timer. + */ +void rtc_timer_init(struct rtc_timer *timer, void (*f)(void* p), void* data) +{ + timerqueue_init(&timer->node); + timer->enabled = 0; + timer->task.func = f; + timer->task.private_data = data; +} + +/* rtc_timer_start - Sets an rtc_timer to fire in the future + * @ rtc: rtc device to be used + * @ timer: timer being set + * @ expires: time at which to expire the timer + * @ period: period that the timer will recur + * + * Kernel interface to set an rtc_timer + */ +int rtc_timer_start(struct rtc_device *rtc, struct rtc_timer* timer, + ktime_t expires, ktime_t period) +{ + int ret = 0; + mutex_lock(&rtc->ops_lock); + if (timer->enabled) + rtc_timer_remove(rtc, timer); + + timer->node.expires = expires; + timer->period = period; + + timer->enabled = 1; + rtc_timer_enqueue(rtc, timer); + + mutex_unlock(&rtc->ops_lock); + return ret; +} + +/* rtc_timer_cancel - Stops an rtc_timer + * @ rtc: rtc device to be used + * @ timer: timer being set + * + * Kernel interface to cancel an rtc_timer + */ +int rtc_timer_cancel(struct rtc_device *rtc, struct rtc_timer* timer) +{ + int ret = 0; + mutex_lock(&rtc->ops_lock); + if (timer->enabled) + rtc_timer_remove(rtc, timer); + timer->enabled = 0; + mutex_unlock(&rtc->ops_lock); + return ret; +} + + diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 5856167a0c9..c7ff8df347e 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -36,6 +36,7 @@ #include <linux/platform_device.h> #include <linux/mod_devicetable.h> #include <linux/log2.h> +#include <linux/pm.h> /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */ #include <asm-generic/rtc.h> @@ -687,7 +688,8 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) #if defined(CONFIG_ATARI) address_space = 64; #elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \ - || defined(__sparc__) || defined(__mips__) + || defined(__sparc__) || defined(__mips__) \ + || defined(__powerpc__) address_space = 128; #else #warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes. @@ -850,7 +852,7 @@ static void __exit cmos_do_remove(struct device *dev) #ifdef CONFIG_PM -static int cmos_suspend(struct device *dev, pm_message_t mesg) +static int cmos_suspend(struct device *dev) { struct cmos_rtc *cmos = dev_get_drvdata(dev); unsigned char tmp; @@ -898,7 +900,7 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg) */ static inline int cmos_poweroff(struct device *dev) { - return cmos_suspend(dev, PMSG_HIBERNATE); + return cmos_suspend(dev); } static int cmos_resume(struct device *dev) @@ -945,9 +947,9 @@ static int cmos_resume(struct device *dev) return 0; } +static SIMPLE_DEV_PM_OPS(cmos_pm_ops, cmos_suspend, cmos_resume); + #else -#define cmos_suspend NULL -#define cmos_resume NULL static inline int cmos_poweroff(struct device *dev) { @@ -1077,7 +1079,7 @@ static void __exit cmos_pnp_remove(struct pnp_dev *pnp) static int cmos_pnp_suspend(struct pnp_dev *pnp, pm_message_t mesg) { - return cmos_suspend(&pnp->dev, mesg); + return cmos_suspend(&pnp->dev); } static int cmos_pnp_resume(struct pnp_dev *pnp) @@ -1157,8 +1159,9 @@ static struct platform_driver cmos_platform_driver = { .shutdown = cmos_platform_shutdown, .driver = { .name = (char *) driver_name, - .suspend = cmos_suspend, - .resume = cmos_resume, +#ifdef CONFIG_PM + .pm = &cmos_pm_ops, +#endif } }; diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index 62227cd5241..212b16edafc 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -46,105 +46,6 @@ static int rtc_dev_open(struct inode *inode, struct file *file) return err; } -#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL -/* - * Routine to poll RTC seconds field for change as often as possible, - * after first RTC_UIE use timer to reduce polling - */ -static void rtc_uie_task(struct work_struct *work) -{ - struct rtc_device *rtc = - container_of(work, struct rtc_device, uie_task); - struct rtc_time tm; - int num = 0; - int err; - - err = rtc_read_time(rtc, &tm); - - spin_lock_irq(&rtc->irq_lock); - if (rtc->stop_uie_polling || err) { - rtc->uie_task_active = 0; - } else if (rtc->oldsecs != tm.tm_sec) { - num = (tm.tm_sec + 60 - rtc->oldsecs) % 60; - rtc->oldsecs = tm.tm_sec; - rtc->uie_timer.expires = jiffies + HZ - (HZ/10); - rtc->uie_timer_active = 1; - rtc->uie_task_active = 0; - add_timer(&rtc->uie_timer); - } else if (schedule_work(&rtc->uie_task) == 0) { - rtc->uie_task_active = 0; - } - spin_unlock_irq(&rtc->irq_lock); - if (num) - rtc_update_irq(rtc, num, RTC_UF | RTC_IRQF); -} -static void rtc_uie_timer(unsigned long data) -{ - struct rtc_device *rtc = (struct rtc_device *)data; - unsigned long flags; - - spin_lock_irqsave(&rtc->irq_lock, flags); - rtc->uie_timer_active = 0; - rtc->uie_task_active = 1; - if ((schedule_work(&rtc->uie_task) == 0)) - rtc->uie_task_active = 0; - spin_unlock_irqrestore(&rtc->irq_lock, flags); -} - -static int clear_uie(struct rtc_device *rtc) -{ - spin_lock_irq(&rtc->irq_lock); - if (rtc->uie_irq_active) { - rtc->stop_uie_polling = 1; - if (rtc->uie_timer_active) { - spin_unlock_irq(&rtc->irq_lock); - del_timer_sync(&rtc->uie_timer); - spin_lock_irq(&rtc->irq_lock); - rtc->uie_timer_active = 0; - } - if (rtc->uie_task_active) { - spin_unlock_irq(&rtc->irq_lock); - flush_scheduled_work(); - spin_lock_irq(&rtc->irq_lock); - } - rtc->uie_irq_active = 0; - } - spin_unlock_irq(&rtc->irq_lock); - return 0; -} - -static int set_uie(struct rtc_device *rtc) -{ - struct rtc_time tm; - int err; - - err = rtc_read_time(rtc, &tm); - if (err) - return err; - spin_lock_irq(&rtc->irq_lock); - if (!rtc->uie_irq_active) { - rtc->uie_irq_active = 1; - rtc->stop_uie_polling = 0; - rtc->oldsecs = tm.tm_sec; - rtc->uie_task_active = 1; - if (schedule_work(&rtc->uie_task) == 0) - rtc->uie_task_active = 0; - } - rtc->irq_data = 0; - spin_unlock_irq(&rtc->irq_lock); - return 0; -} - -int rtc_dev_update_irq_enable_emul(struct rtc_device *rtc, unsigned int enabled) -{ - if (enabled) - return set_uie(rtc); - else - return clear_uie(rtc); -} -EXPORT_SYMBOL(rtc_dev_update_irq_enable_emul); - -#endif /* CONFIG_RTC_INTF_DEV_UIE_EMUL */ static ssize_t rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) @@ -493,11 +394,6 @@ void rtc_dev_prepare(struct rtc_device *rtc) rtc->dev.devt = MKDEV(MAJOR(rtc_devt), rtc->id); -#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL - INIT_WORK(&rtc->uie_task, rtc_uie_task); - setup_timer(&rtc->uie_timer, rtc_uie_timer, (unsigned long)rtc); -#endif - cdev_init(&rtc->char_dev, &rtc_dev_fops); rtc->char_dev.owner = rtc->owner; } diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c index 48da85e97ca..077af1d7b9e 100644 --- a/drivers/rtc/rtc-ds1305.c +++ b/drivers/rtc/rtc-ds1305.c @@ -813,7 +813,7 @@ static int __devexit ds1305_remove(struct spi_device *spi) if (spi->irq) { set_bit(FLAG_EXITING, &ds1305->flags); free_irq(spi->irq, ds1305); - flush_scheduled_work(); + cancel_work_sync(&ds1305->work); } rtc_device_unregister(ds1305->rtc); diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index d827ce570a8..0d559b6416d 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -106,9 +106,9 @@ struct ds1307 { struct i2c_client *client; struct rtc_device *rtc; struct work_struct work; - s32 (*read_block_data)(struct i2c_client *client, u8 command, + s32 (*read_block_data)(const struct i2c_client *client, u8 command, u8 length, u8 *values); - s32 (*write_block_data)(struct i2c_client *client, u8 command, + s32 (*write_block_data)(const struct i2c_client *client, u8 command, u8 length, const u8 *values); }; @@ -158,8 +158,8 @@ MODULE_DEVICE_TABLE(i2c, ds1307_id); #define BLOCK_DATA_MAX_TRIES 10 -static s32 ds1307_read_block_data_once(struct i2c_client *client, u8 command, - u8 length, u8 *values) +static s32 ds1307_read_block_data_once(const struct i2c_client *client, + u8 command, u8 length, u8 *values) { s32 i, data; @@ -172,7 +172,7 @@ static s32 ds1307_read_block_data_once(struct i2c_client *client, u8 command, return i; } -static s32 ds1307_read_block_data(struct i2c_client *client, u8 command, +static s32 ds1307_read_block_data(const struct i2c_client *client, u8 command, u8 length, u8 *values) { u8 oldvalues[I2C_SMBUS_BLOCK_MAX]; @@ -198,7 +198,7 @@ static s32 ds1307_read_block_data(struct i2c_client *client, u8 command, return length; } -static s32 ds1307_write_block_data(struct i2c_client *client, u8 command, +static s32 ds1307_write_block_data(const struct i2c_client *client, u8 command, u8 length, const u8 *values) { u8 currvalues[I2C_SMBUS_BLOCK_MAX]; diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index 1f0007fd443..47fb6357c34 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -417,7 +417,7 @@ static int __devexit ds1374_remove(struct i2c_client *client) mutex_unlock(&ds1374->mutex); free_irq(client->irq, client); - flush_scheduled_work(); + cancel_work_sync(&ds1374->work); } rtc_device_unregister(ds1374->rtc); diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c index 57063552d3b..23a9ee19764 100644 --- a/drivers/rtc/rtc-ds3232.c +++ b/drivers/rtc/rtc-ds3232.c @@ -463,7 +463,7 @@ static int __devexit ds3232_remove(struct i2c_client *client) mutex_unlock(&ds3232->mutex); free_irq(client->irq, client); - flush_scheduled_work(); + cancel_work_sync(&ds3232->work); } rtc_device_unregister(ds3232->rtc); diff --git a/drivers/rtc/rtc-lib.c b/drivers/rtc/rtc-lib.c index 773851f338b..075f1708dea 100644 --- a/drivers/rtc/rtc-lib.c +++ b/drivers/rtc/rtc-lib.c @@ -117,4 +117,32 @@ int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time) } EXPORT_SYMBOL(rtc_tm_to_time); +/* + * Convert rtc_time to ktime + */ +ktime_t rtc_tm_to_ktime(struct rtc_time tm) +{ + time_t time; + rtc_tm_to_time(&tm, &time); + return ktime_set(time, 0); +} +EXPORT_SYMBOL_GPL(rtc_tm_to_ktime); + +/* + * Convert ktime to rtc_time + */ +struct rtc_time rtc_ktime_to_tm(ktime_t kt) +{ + struct timespec ts; + struct rtc_time ret; + + ts = ktime_to_timespec(kt); + /* Round up any ns */ + if (ts.tv_nsec) + ts.tv_sec++; + rtc_time_to_tm(ts.tv_sec, &ret); + return ret; +} +EXPORT_SYMBOL_GPL(rtc_ktime_to_tm); + MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-max6902.c b/drivers/rtc/rtc-max6902.c index 657403ebd54..0ec3f588a25 100644 --- a/drivers/rtc/rtc-max6902.c +++ b/drivers/rtc/rtc-max6902.c @@ -139,12 +139,13 @@ static int __devinit max6902_probe(struct spi_device *spi) if (IS_ERR(rtc)) return PTR_ERR(rtc); + dev_set_drvdata(&spi->dev, rtc); return 0; } static int __devexit max6902_remove(struct spi_device *spi) { - struct rtc_device *rtc = platform_get_drvdata(spi); + struct rtc_device *rtc = dev_get_drvdata(&spi->dev); rtc_device_unregister(rtc); return 0; diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c new file mode 100644 index 00000000000..bcd0cf63eb1 --- /dev/null +++ b/drivers/rtc/rtc-mrst.c @@ -0,0 +1,582 @@ +/* + * rtc-mrst.c: Driver for Moorestown virtual RTC + * + * (C) Copyright 2009 Intel Corporation + * Author: Jacob Pan (jacob.jun.pan@intel.com) + * Feng Tang (feng.tang@intel.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + * + * Note: + * VRTC is emulated by system controller firmware, the real HW + * RTC is located in the PMIC device. SCU FW shadows PMIC RTC + * in a memory mapped IO space that is visible to the host IA + * processor. + * + * This driver is based upon drivers/rtc/rtc-cmos.c + */ + +/* + * Note: + * * vRTC only supports binary mode and 24H mode + * * vRTC only support PIE and AIE, no UIE, and its PIE only happens + * at 23:59:59pm everyday, no support for adjustable frequency + * * Alarm function is also limited to hr/min/sec. + */ + +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sfi.h> + +#include <asm-generic/rtc.h> +#include <asm/intel_scu_ipc.h> +#include <asm/mrst.h> +#include <asm/mrst-vrtc.h> + +struct mrst_rtc { + struct rtc_device *rtc; + struct device *dev; + int irq; + struct resource *iomem; + + u8 enabled_wake; + u8 suspend_ctrl; +}; + +static const char driver_name[] = "rtc_mrst"; + +#define RTC_IRQMASK (RTC_PF | RTC_AF) + +static inline int is_intr(u8 rtc_intr) +{ + if (!(rtc_intr & RTC_IRQF)) + return 0; + return rtc_intr & RTC_IRQMASK; +} + +/* + * rtc_time's year contains the increment over 1900, but vRTC's YEAR + * register can't be programmed to value larger than 0x64, so vRTC + * driver chose to use 1960 (1970 is UNIX time start point) as the base, + * and does the translation at read/write time. + * + * Why not just use 1970 as the offset? it's because using 1960 will + * make it consistent in leap year setting for both vrtc and low-level + * physical rtc devices. + */ +static int mrst_read_time(struct device *dev, struct rtc_time *time) +{ + unsigned long flags; + + if (rtc_is_updating()) + mdelay(20); + + spin_lock_irqsave(&rtc_lock, flags); + time->tm_sec = vrtc_cmos_read(RTC_SECONDS); + time->tm_min = vrtc_cmos_read(RTC_MINUTES); + time->tm_hour = vrtc_cmos_read(RTC_HOURS); + time->tm_mday = vrtc_cmos_read(RTC_DAY_OF_MONTH); + time->tm_mon = vrtc_cmos_read(RTC_MONTH); + time->tm_year = vrtc_cmos_read(RTC_YEAR); + spin_unlock_irqrestore(&rtc_lock, flags); + + /* Adjust for the 1960/1900 */ + time->tm_year += 60; + time->tm_mon--; + return RTC_24H; +} + +static int mrst_set_time(struct device *dev, struct rtc_time *time) +{ + int ret; + unsigned long flags; + unsigned char mon, day, hrs, min, sec; + unsigned int yrs; + + yrs = time->tm_year; + mon = time->tm_mon + 1; /* tm_mon starts at zero */ + day = time->tm_mday; + hrs = time->tm_hour; + min = time->tm_min; + sec = time->tm_sec; + + if (yrs < 70 || yrs > 138) + return -EINVAL; + yrs -= 60; + + spin_lock_irqsave(&rtc_lock, flags); + + vrtc_cmos_write(yrs, RTC_YEAR); + vrtc_cmos_write(mon, RTC_MONTH); + vrtc_cmos_write(day, RTC_DAY_OF_MONTH); + vrtc_cmos_write(hrs, RTC_HOURS); + vrtc_cmos_write(min, RTC_MINUTES); + vrtc_cmos_write(sec, RTC_SECONDS); + + spin_unlock_irqrestore(&rtc_lock, flags); + + ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETTIME); + return ret; +} + +static int mrst_read_alarm(struct device *dev, struct rtc_wkalrm *t) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + unsigned char rtc_control; + + if (mrst->irq <= 0) + return -EIO; + + /* Basic alarms only support hour, minute, and seconds fields. + * Some also support day and month, for alarms up to a year in + * the future. + */ + t->time.tm_mday = -1; + t->time.tm_mon = -1; + t->time.tm_year = -1; + + /* vRTC only supports binary mode */ + spin_lock_irq(&rtc_lock); + t->time.tm_sec = vrtc_cmos_read(RTC_SECONDS_ALARM); + t->time.tm_min = vrtc_cmos_read(RTC_MINUTES_ALARM); + t->time.tm_hour = vrtc_cmos_read(RTC_HOURS_ALARM); + + rtc_control = vrtc_cmos_read(RTC_CONTROL); + spin_unlock_irq(&rtc_lock); + + t->enabled = !!(rtc_control & RTC_AIE); + t->pending = 0; + + return 0; +} + +static void mrst_checkintr(struct mrst_rtc *mrst, unsigned char rtc_control) +{ + unsigned char rtc_intr; + + /* + * NOTE after changing RTC_xIE bits we always read INTR_FLAGS; + * allegedly some older rtcs need that to handle irqs properly + */ + rtc_intr = vrtc_cmos_read(RTC_INTR_FLAGS); + rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF; + if (is_intr(rtc_intr)) + rtc_update_irq(mrst->rtc, 1, rtc_intr); +} + +static void mrst_irq_enable(struct mrst_rtc *mrst, unsigned char mask) +{ + unsigned char rtc_control; + + /* + * Flush any pending IRQ status, notably for update irqs, + * before we enable new IRQs + */ + rtc_control = vrtc_cmos_read(RTC_CONTROL); + mrst_checkintr(mrst, rtc_control); + + rtc_control |= mask; + vrtc_cmos_write(rtc_control, RTC_CONTROL); + + mrst_checkintr(mrst, rtc_control); +} + +static void mrst_irq_disable(struct mrst_rtc *mrst, unsigned char mask) +{ + unsigned char rtc_control; + + rtc_control = vrtc_cmos_read(RTC_CONTROL); + rtc_control &= ~mask; + vrtc_cmos_write(rtc_control, RTC_CONTROL); + mrst_checkintr(mrst, rtc_control); +} + +static int mrst_set_alarm(struct device *dev, struct rtc_wkalrm *t) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + unsigned char hrs, min, sec; + int ret = 0; + + if (!mrst->irq) + return -EIO; + + hrs = t->time.tm_hour; + min = t->time.tm_min; + sec = t->time.tm_sec; + + spin_lock_irq(&rtc_lock); + /* Next rtc irq must not be from previous alarm setting */ + mrst_irq_disable(mrst, RTC_AIE); + + /* Update alarm */ + vrtc_cmos_write(hrs, RTC_HOURS_ALARM); + vrtc_cmos_write(min, RTC_MINUTES_ALARM); + vrtc_cmos_write(sec, RTC_SECONDS_ALARM); + + spin_unlock_irq(&rtc_lock); + + ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETALARM); + if (ret) + return ret; + + spin_lock_irq(&rtc_lock); + if (t->enabled) + mrst_irq_enable(mrst, RTC_AIE); + + spin_unlock_irq(&rtc_lock); + + return 0; +} + +static int mrst_irq_set_state(struct device *dev, int enabled) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + unsigned long flags; + + if (!mrst->irq) + return -ENXIO; + + spin_lock_irqsave(&rtc_lock, flags); + + if (enabled) + mrst_irq_enable(mrst, RTC_PIE); + else + mrst_irq_disable(mrst, RTC_PIE); + + spin_unlock_irqrestore(&rtc_lock, flags); + return 0; +} + +#if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE) + +/* Currently, the vRTC doesn't support UIE ON/OFF */ +static int +mrst_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + unsigned long flags; + + switch (cmd) { + case RTC_AIE_OFF: + case RTC_AIE_ON: + if (!mrst->irq) + return -EINVAL; + break; + default: + /* PIE ON/OFF is handled by mrst_irq_set_state() */ + return -ENOIOCTLCMD; + } + + spin_lock_irqsave(&rtc_lock, flags); + switch (cmd) { + case RTC_AIE_OFF: /* alarm off */ + mrst_irq_disable(mrst, RTC_AIE); + break; + case RTC_AIE_ON: /* alarm on */ + mrst_irq_enable(mrst, RTC_AIE); + break; + } + spin_unlock_irqrestore(&rtc_lock, flags); + return 0; +} + +#else +#define mrst_rtc_ioctl NULL +#endif + +#if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE) + +static int mrst_procfs(struct device *dev, struct seq_file *seq) +{ + unsigned char rtc_control, valid; + + spin_lock_irq(&rtc_lock); + rtc_control = vrtc_cmos_read(RTC_CONTROL); + valid = vrtc_cmos_read(RTC_VALID); + spin_unlock_irq(&rtc_lock); + + return seq_printf(seq, + "periodic_IRQ\t: %s\n" + "alarm\t\t: %s\n" + "BCD\t\t: no\n" + "periodic_freq\t: daily (not adjustable)\n", + (rtc_control & RTC_PIE) ? "on" : "off", + (rtc_control & RTC_AIE) ? "on" : "off"); +} + +#else +#define mrst_procfs NULL +#endif + +static const struct rtc_class_ops mrst_rtc_ops = { + .ioctl = mrst_rtc_ioctl, + .read_time = mrst_read_time, + .set_time = mrst_set_time, + .read_alarm = mrst_read_alarm, + .set_alarm = mrst_set_alarm, + .proc = mrst_procfs, + .irq_set_state = mrst_irq_set_state, +}; + +static struct mrst_rtc mrst_rtc; + +/* + * When vRTC IRQ is captured by SCU FW, FW will clear the AIE bit in + * Reg B, so no need for this driver to clear it + */ +static irqreturn_t mrst_rtc_irq(int irq, void *p) +{ + u8 irqstat; + + spin_lock(&rtc_lock); + /* This read will clear all IRQ flags inside Reg C */ + irqstat = vrtc_cmos_read(RTC_INTR_FLAGS); + spin_unlock(&rtc_lock); + + irqstat &= RTC_IRQMASK | RTC_IRQF; + if (is_intr(irqstat)) { + rtc_update_irq(p, 1, irqstat); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static int __init +vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, int rtc_irq) +{ + int retval = 0; + unsigned char rtc_control; + + /* There can be only one ... */ + if (mrst_rtc.dev) + return -EBUSY; + + if (!iomem) + return -ENODEV; + + iomem = request_mem_region(iomem->start, + iomem->end + 1 - iomem->start, + driver_name); + if (!iomem) { + dev_dbg(dev, "i/o mem already in use.\n"); + return -EBUSY; + } + + mrst_rtc.irq = rtc_irq; + mrst_rtc.iomem = iomem; + + mrst_rtc.rtc = rtc_device_register(driver_name, dev, + &mrst_rtc_ops, THIS_MODULE); + if (IS_ERR(mrst_rtc.rtc)) { + retval = PTR_ERR(mrst_rtc.rtc); + goto cleanup0; + } + + mrst_rtc.dev = dev; + dev_set_drvdata(dev, &mrst_rtc); + rename_region(iomem, dev_name(&mrst_rtc.rtc->dev)); + + spin_lock_irq(&rtc_lock); + mrst_irq_disable(&mrst_rtc, RTC_PIE | RTC_AIE); + rtc_control = vrtc_cmos_read(RTC_CONTROL); + spin_unlock_irq(&rtc_lock); + + if (!(rtc_control & RTC_24H) || (rtc_control & (RTC_DM_BINARY))) + dev_dbg(dev, "TODO: support more than 24-hr BCD mode\n"); + + if (rtc_irq) { + retval = request_irq(rtc_irq, mrst_rtc_irq, + IRQF_DISABLED, dev_name(&mrst_rtc.rtc->dev), + mrst_rtc.rtc); + if (retval < 0) { + dev_dbg(dev, "IRQ %d is already in use, err %d\n", + rtc_irq, retval); + goto cleanup1; + } + } + dev_dbg(dev, "initialised\n"); + return 0; + +cleanup1: + mrst_rtc.dev = NULL; + rtc_device_unregister(mrst_rtc.rtc); +cleanup0: + release_region(iomem->start, iomem->end + 1 - iomem->start); + dev_err(dev, "rtc-mrst: unable to initialise\n"); + return retval; +} + +static void rtc_mrst_do_shutdown(void) +{ + spin_lock_irq(&rtc_lock); + mrst_irq_disable(&mrst_rtc, RTC_IRQMASK); + spin_unlock_irq(&rtc_lock); +} + +static void __exit rtc_mrst_do_remove(struct device *dev) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + struct resource *iomem; + + rtc_mrst_do_shutdown(); + + if (mrst->irq) + free_irq(mrst->irq, mrst->rtc); + + rtc_device_unregister(mrst->rtc); + mrst->rtc = NULL; + + iomem = mrst->iomem; + release_region(iomem->start, iomem->end + 1 - iomem->start); + mrst->iomem = NULL; + + mrst->dev = NULL; + dev_set_drvdata(dev, NULL); +} + +#ifdef CONFIG_PM +static int mrst_suspend(struct device *dev, pm_message_t mesg) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + unsigned char tmp; + + /* Only the alarm might be a wakeup event source */ + spin_lock_irq(&rtc_lock); + mrst->suspend_ctrl = tmp = vrtc_cmos_read(RTC_CONTROL); + if (tmp & (RTC_PIE | RTC_AIE)) { + unsigned char mask; + + if (device_may_wakeup(dev)) + mask = RTC_IRQMASK & ~RTC_AIE; + else + mask = RTC_IRQMASK; + tmp &= ~mask; + vrtc_cmos_write(tmp, RTC_CONTROL); + + mrst_checkintr(mrst, tmp); + } + spin_unlock_irq(&rtc_lock); + + if (tmp & RTC_AIE) { + mrst->enabled_wake = 1; + enable_irq_wake(mrst->irq); + } + + dev_dbg(&mrst_rtc.rtc->dev, "suspend%s, ctrl %02x\n", + (tmp & RTC_AIE) ? ", alarm may wake" : "", + tmp); + + return 0; +} + +/* + * We want RTC alarms to wake us from the deep power saving state + */ +static inline int mrst_poweroff(struct device *dev) +{ + return mrst_suspend(dev, PMSG_HIBERNATE); +} + +static int mrst_resume(struct device *dev) +{ + struct mrst_rtc *mrst = dev_get_drvdata(dev); + unsigned char tmp = mrst->suspend_ctrl; + + /* Re-enable any irqs previously active */ + if (tmp & RTC_IRQMASK) { + unsigned char mask; + + if (mrst->enabled_wake) { + disable_irq_wake(mrst->irq); + mrst->enabled_wake = 0; + } + + spin_lock_irq(&rtc_lock); + do { + vrtc_cmos_write(tmp, RTC_CONTROL); + + mask = vrtc_cmos_read(RTC_INTR_FLAGS); + mask &= (tmp & RTC_IRQMASK) | RTC_IRQF; + if (!is_intr(mask)) + break; + + rtc_update_irq(mrst->rtc, 1, mask); + tmp &= ~RTC_AIE; + } while (mask & RTC_AIE); + spin_unlock_irq(&rtc_lock); + } + + dev_dbg(&mrst_rtc.rtc->dev, "resume, ctrl %02x\n", tmp); + + return 0; +} + +#else +#define mrst_suspend NULL +#define mrst_resume NULL + +static inline int mrst_poweroff(struct device *dev) +{ + return -ENOSYS; +} + +#endif + +static int __init vrtc_mrst_platform_probe(struct platform_device *pdev) +{ + return vrtc_mrst_do_probe(&pdev->dev, + platform_get_resource(pdev, IORESOURCE_MEM, 0), + platform_get_irq(pdev, 0)); +} + +static int __exit vrtc_mrst_platform_remove(struct platform_device *pdev) +{ + rtc_mrst_do_remove(&pdev->dev); + return 0; +} + +static void vrtc_mrst_platform_shutdown(struct platform_device *pdev) +{ + if (system_state == SYSTEM_POWER_OFF && !mrst_poweroff(&pdev->dev)) + return; + + rtc_mrst_do_shutdown(); +} + +MODULE_ALIAS("platform:vrtc_mrst"); + +static struct platform_driver vrtc_mrst_platform_driver = { + .probe = vrtc_mrst_platform_probe, + .remove = __exit_p(vrtc_mrst_platform_remove), + .shutdown = vrtc_mrst_platform_shutdown, + .driver = { + .name = (char *) driver_name, + .suspend = mrst_suspend, + .resume = mrst_resume, + } +}; + +static int __init vrtc_mrst_init(void) +{ + return platform_driver_register(&vrtc_mrst_platform_driver); +} + +static void __exit vrtc_mrst_exit(void) +{ + platform_driver_unregister(&vrtc_mrst_platform_driver); +} + +module_init(vrtc_mrst_init); +module_exit(vrtc_mrst_exit); + +MODULE_AUTHOR("Jacob Pan; Feng Tang"); +MODULE_DESCRIPTION("Driver for Moorestown virtual RTC"); +MODULE_LICENSE("GPL"); diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 73377b0d65d..e72b523c79a 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -429,13 +429,14 @@ fail1: fail0: iounmap(rtc_base); fail: - release_resource(mem); + release_mem_region(mem->start, resource_size(mem)); return -EIO; } static int __exit omap_rtc_remove(struct platform_device *pdev) { struct rtc_device *rtc = platform_get_drvdata(pdev); + struct resource *mem = dev_get_drvdata(&rtc->dev); device_init_wakeup(&pdev->dev, 0); @@ -447,8 +448,9 @@ static int __exit omap_rtc_remove(struct platform_device *pdev) if (omap_rtc_timer != omap_rtc_alarm) free_irq(omap_rtc_alarm, rtc); - release_resource(dev_get_drvdata(&rtc->dev)); rtc_device_unregister(rtc); + iounmap(rtc_base); + release_mem_region(mem->start, resource_size(mem)); return 0; } diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c index 1146e3522d3..af32a62e12a 100644 --- a/drivers/rtc/rtc-rx8025.c +++ b/drivers/rtc/rtc-rx8025.c @@ -650,7 +650,7 @@ static int __devexit rx8025_remove(struct i2c_client *client) mutex_unlock(lock); free_irq(client->irq, client); - flush_scheduled_work(); + cancel_work_sync(&rx8025->work); } rx8025_sysfs_unregister(&client->dev); diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index e4a44b64170..88ea52b8647 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -39,10 +39,10 @@ #include <mach/regs-ost.h> #endif -#define RTC_DEF_DIVIDER 32768 - 1 +#define RTC_DEF_DIVIDER (32768 - 1) #define RTC_DEF_TRIM 0 -static unsigned long rtc_freq = 1024; +static const unsigned long RTC_FREQ = 1024; static unsigned long timer_freq; static struct rtc_time rtc_alarm; static DEFINE_SPINLOCK(sa1100_rtc_lock); @@ -61,7 +61,8 @@ static inline int rtc_periodic_alarm(struct rtc_time *tm) * Calculate the next alarm time given the requested alarm time mask * and the current time. */ -static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm) +static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, + struct rtc_time *alrm) { unsigned long next_time; unsigned long now_time; @@ -116,7 +117,23 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) rtsr = RTSR; /* clear interrupt sources */ RTSR = 0; - RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2); + /* Fix for a nasty initialization problem the in SA11xx RTSR register. + * See also the comments in sa1100_rtc_probe(). */ + if (rtsr & (RTSR_ALE | RTSR_HZE)) { + /* This is the original code, before there was the if test + * above. This code does not clear interrupts that were not + * enabled. */ + RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2); + } else { + /* For some reason, it is possible to enter this routine + * without interruptions enabled, it has been tested with + * several units (Bug in SA11xx chip?). + * + * This situation leads to an infinite "loop" of interrupt + * routine calling and as a result the processor seems to + * lock on its first call to open(). */ + RTSR = RTSR_AL | RTSR_HZ; + } /* clear alarm interrupt if it has occurred */ if (rtsr & RTSR_AL) @@ -139,8 +156,58 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +static int sa1100_irq_set_freq(struct device *dev, int freq) +{ + if (freq < 1 || freq > timer_freq) { + return -EINVAL; + } else { + struct rtc_device *rtc = (struct rtc_device *)dev; + + rtc->irq_freq = freq; + + return 0; + } +} + static int rtc_timer1_count; +static int sa1100_irq_set_state(struct device *dev, int enabled) +{ + spin_lock_irq(&sa1100_rtc_lock); + if (enabled) { + struct rtc_device *rtc = (struct rtc_device *)dev; + + OSMR1 = timer_freq / rtc->irq_freq + OSCR; + OIER |= OIER_E1; + rtc_timer1_count = 1; + } else { + OIER &= ~OIER_E1; + } + spin_unlock_irq(&sa1100_rtc_lock); + + return 0; +} + +static inline int sa1100_timer1_retrigger(struct rtc_device *rtc) +{ + unsigned long diff; + unsigned long period = timer_freq / rtc->irq_freq; + + spin_lock_irq(&sa1100_rtc_lock); + + do { + OSMR1 += period; + diff = OSMR1 - OSCR; + /* If OSCR > OSMR1, diff is a very large number (unsigned + * math). This means we have a lost interrupt. */ + } while (diff > period); + OIER |= OIER_E1; + + spin_unlock_irq(&sa1100_rtc_lock); + + return 0; +} + static irqreturn_t timer1_interrupt(int irq, void *dev_id) { struct platform_device *pdev = to_platform_device(dev_id); @@ -158,7 +225,11 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id) rtc_update_irq(rtc, rtc_timer1_count, RTC_PF | RTC_IRQF); if (rtc_timer1_count == 1) - rtc_timer1_count = (rtc_freq * ((1 << 30) / (timer_freq >> 2))); + rtc_timer1_count = + (rtc->irq_freq * ((1 << 30) / (timer_freq >> 2))); + + /* retrigger. */ + sa1100_timer1_retrigger(rtc); return IRQ_HANDLED; } @@ -166,8 +237,10 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id) static int sa1100_rtc_read_callback(struct device *dev, int data) { if (data & RTC_PF) { + struct rtc_device *rtc = (struct rtc_device *)dev; + /* interpolate missed periods and set match for the next */ - unsigned long period = timer_freq / rtc_freq; + unsigned long period = timer_freq / rtc->irq_freq; unsigned long oscr = OSCR; unsigned long osmr1 = OSMR1; unsigned long missed = (oscr - osmr1)/period; @@ -178,7 +251,7 @@ static int sa1100_rtc_read_callback(struct device *dev, int data) * Here we compare (match - OSCR) 8 instead of 0 -- * see comment in pxa_timer_interrupt() for explanation. */ - while( (signed long)((osmr1 = OSMR1) - OSCR) <= 8 ) { + while ((signed long)((osmr1 = OSMR1) - OSCR) <= 8) { data += 0x100; OSSR = OSSR_M1; /* clear match on timer 1 */ OSMR1 = osmr1 + period; @@ -190,25 +263,29 @@ static int sa1100_rtc_read_callback(struct device *dev, int data) static int sa1100_rtc_open(struct device *dev) { int ret; + struct rtc_device *rtc = (struct rtc_device *)dev; ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED, - "rtc 1Hz", dev); + "rtc 1Hz", dev); if (ret) { dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz); goto fail_ui; } ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED, - "rtc Alrm", dev); + "rtc Alrm", dev); if (ret) { dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm); goto fail_ai; } ret = request_irq(IRQ_OST1, timer1_interrupt, IRQF_DISABLED, - "rtc timer", dev); + "rtc timer", dev); if (ret) { dev_err(dev, "IRQ %d already in use.\n", IRQ_OST1); goto fail_pi; } + rtc->max_user_freq = RTC_FREQ; + sa1100_irq_set_freq(dev, RTC_FREQ); + return 0; fail_pi: @@ -236,7 +313,7 @@ static void sa1100_rtc_release(struct device *dev) static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { - switch(cmd) { + switch (cmd) { case RTC_AIE_OFF: spin_lock_irq(&sa1100_rtc_lock); RTSR &= ~RTSR_ALE; @@ -257,25 +334,6 @@ static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd, RTSR |= RTSR_HZE; spin_unlock_irq(&sa1100_rtc_lock); return 0; - case RTC_PIE_OFF: - spin_lock_irq(&sa1100_rtc_lock); - OIER &= ~OIER_E1; - spin_unlock_irq(&sa1100_rtc_lock); - return 0; - case RTC_PIE_ON: - spin_lock_irq(&sa1100_rtc_lock); - OSMR1 = timer_freq / rtc_freq + OSCR; - OIER |= OIER_E1; - rtc_timer1_count = 1; - spin_unlock_irq(&sa1100_rtc_lock); - return 0; - case RTC_IRQP_READ: - return put_user(rtc_freq, (unsigned long *)arg); - case RTC_IRQP_SET: - if (arg < 1 || arg > timer_freq) - return -EINVAL; - rtc_freq = arg; - return 0; } return -ENOIOCTLCMD; } @@ -327,12 +385,15 @@ static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq) { + struct rtc_device *rtc = (struct rtc_device *)dev; + seq_printf(seq, "trim/divider\t: 0x%08x\n", (u32) RTTR); seq_printf(seq, "update_IRQ\t: %s\n", (RTSR & RTSR_HZE) ? "yes" : "no"); seq_printf(seq, "periodic_IRQ\t: %s\n", (OIER & OIER_E1) ? "yes" : "no"); - seq_printf(seq, "periodic_freq\t: %ld\n", rtc_freq); + seq_printf(seq, "periodic_freq\t: %d\n", rtc->irq_freq); + seq_printf(seq, "RTSR\t\t: 0x%08x\n", (u32)RTSR); return 0; } @@ -347,6 +408,8 @@ static const struct rtc_class_ops sa1100_rtc_ops = { .read_alarm = sa1100_rtc_read_alarm, .set_alarm = sa1100_rtc_set_alarm, .proc = sa1100_rtc_proc, + .irq_set_freq = sa1100_irq_set_freq, + .irq_set_state = sa1100_irq_set_state, }; static int sa1100_rtc_probe(struct platform_device *pdev) @@ -364,7 +427,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev) */ if (RTTR == 0) { RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16); - dev_warn(&pdev->dev, "warning: initializing default clock divider/trim value\n"); + dev_warn(&pdev->dev, "warning: " + "initializing default clock divider/trim value\n"); /* The current RTC value probably doesn't make sense either */ RCNR = 0; } @@ -372,13 +436,42 @@ static int sa1100_rtc_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 1); rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops, - THIS_MODULE); + THIS_MODULE); if (IS_ERR(rtc)) return PTR_ERR(rtc); platform_set_drvdata(pdev, rtc); + /* Set the irq_freq */ + /*TODO: Find out who is messing with this value after we initialize + * it here.*/ + rtc->irq_freq = RTC_FREQ; + + /* Fix for a nasty initialization problem the in SA11xx RTSR register. + * See also the comments in sa1100_rtc_interrupt(). + * + * Sometimes bit 1 of the RTSR (RTSR_HZ) will wake up 1, which means an + * interrupt pending, even though interrupts were never enabled. + * In this case, this bit it must be reset before enabling + * interruptions to avoid a nonexistent interrupt to occur. + * + * In principle, the same problem would apply to bit 0, although it has + * never been observed to happen. + * + * This issue is addressed both here and in sa1100_rtc_interrupt(). + * If the issue is not addressed here, in the times when the processor + * wakes up with the bit set there will be one spurious interrupt. + * + * The issue is also dealt with in sa1100_rtc_interrupt() to be on the + * safe side, once the condition that lead to this strange + * initialization is unknown and could in principle happen during + * normal processing. + * + * Notice that clearing bit 1 and 0 is accomplished by writting ONES to + * the corresponding bits in RTSR. */ + RTSR = RTSR_AL | RTSR_HZ; + return 0; } @@ -386,7 +479,7 @@ static int sa1100_rtc_remove(struct platform_device *pdev) { struct rtc_device *rtc = platform_get_drvdata(pdev); - if (rtc) + if (rtc) rtc_device_unregister(rtc); return 0; |