summaryrefslogtreecommitdiffstats
path: root/drivers/s390/char/tape_34xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/s390/char/tape_34xx.c')
-rw-r--r--drivers/s390/char/tape_34xx.c161
1 files changed, 70 insertions, 91 deletions
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 22ca34361ed..807ded5eb04 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -8,6 +8,8 @@
* Martin Schwidefsky <schwidefsky@de.ibm.com>
*/
+#define KMSG_COMPONENT "tape"
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bio.h>
@@ -18,8 +20,6 @@
#include "tape.h"
#include "tape_std.h"
-#define PRINTK_HEADER "TAPE_34XX: "
-
/*
* Pointer to debug area.
*/
@@ -203,8 +203,7 @@ tape_34xx_unsolicited_irq(struct tape_device *device, struct irb *irb)
tape_34xx_schedule_work(device, TO_MSEN);
} else {
DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id);
- PRINT_WARN("Unsolicited IRQ (Device End) caught.\n");
- tape_dump_sense(device, NULL, irb);
+ tape_dump_sense_dbf(device, NULL, irb);
}
return TAPE_IO_SUCCESS;
}
@@ -226,9 +225,7 @@ tape_34xx_erp_read_opposite(struct tape_device *device,
tape_std_read_backward(device, request);
return tape_34xx_erp_retry(request);
}
- if (request->op != TO_RBA)
- PRINT_ERR("read_opposite called with state:%s\n",
- tape_op_verbose[request->op]);
+
/*
* We tried to read forward and backward, but hat no
* success -> failed.
@@ -241,13 +238,9 @@ tape_34xx_erp_bug(struct tape_device *device, struct tape_request *request,
struct irb *irb, int no)
{
if (request->op != TO_ASSIGN) {
- PRINT_WARN("An unexpected condition #%d was caught in "
- "tape error recovery.\n", no);
- PRINT_WARN("Please report this incident.\n");
- if (request)
- PRINT_WARN("Operation of tape:%s\n",
- tape_op_verbose[request->op]);
- tape_dump_sense(device, request, irb);
+ dev_err(&device->cdev->dev, "An unexpected condition %d "
+ "occurred in tape error recovery\n", no);
+ tape_dump_sense_dbf(device, request, irb);
}
return tape_34xx_erp_failed(request, -EIO);
}
@@ -261,9 +254,8 @@ tape_34xx_erp_overrun(struct tape_device *device, struct tape_request *request,
struct irb *irb)
{
if (irb->ecw[3] == 0x40) {
- PRINT_WARN ("Data overrun error between control-unit "
- "and drive. Use a faster channel connection, "
- "if possible! \n");
+ dev_warn (&device->cdev->dev, "A data overrun occurred between"
+ " the control unit and tape unit\n");
return tape_34xx_erp_failed(request, -EIO);
}
return tape_34xx_erp_bug(device, request, irb, -1);
@@ -280,7 +272,8 @@ tape_34xx_erp_sequence(struct tape_device *device,
/*
* cu detected incorrect block-id sequence on tape.
*/
- PRINT_WARN("Illegal block-id sequence found!\n");
+ dev_warn (&device->cdev->dev, "The block ID sequence on the "
+ "tape is incorrect\n");
return tape_34xx_erp_failed(request, -EIO);
}
/*
@@ -393,8 +386,6 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
/* Writing at physical end of volume */
return tape_34xx_erp_failed(request, -ENOSPC);
default:
- PRINT_ERR("Invalid op in %s:%i\n",
- __func__, __LINE__);
return tape_34xx_erp_failed(request, 0);
}
}
@@ -420,7 +411,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
irb, -4);
/* data check is permanent, CU recovery has failed */
- PRINT_WARN("Permanent read error\n");
+ dev_warn (&device->cdev->dev, "A read error occurred "
+ "that cannot be recovered\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x25:
// a write data check occurred
@@ -433,22 +425,26 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
irb, -5);
// data check is permanent, cu-recovery has failed
- PRINT_WARN("Permanent write error\n");
+ dev_warn (&device->cdev->dev, "A write error on the "
+ "tape cannot be recovered\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x26:
/* Data Check (read opposite) occurred. */
return tape_34xx_erp_read_opposite(device, request);
case 0x28:
/* ID-Mark at tape start couldn't be written */
- PRINT_WARN("ID-Mark could not be written.\n");
+ dev_warn (&device->cdev->dev, "Writing the ID-mark "
+ "failed\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x31:
/* Tape void. Tried to read beyond end of device. */
- PRINT_WARN("Read beyond end of recorded area.\n");
+ dev_warn (&device->cdev->dev, "Reading the tape beyond"
+ " the end of the recorded area failed\n");
return tape_34xx_erp_failed(request, -ENOSPC);
case 0x41:
/* Record sequence error. */
- PRINT_WARN("Invalid block-id sequence found.\n");
+ dev_warn (&device->cdev->dev, "The tape contains an "
+ "incorrect block ID sequence\n");
return tape_34xx_erp_failed(request, -EIO);
default:
/* all data checks for 3480 should result in one of
@@ -470,16 +466,12 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
switch (sense[3]) {
case 0x00:
/* Unit check with erpa code 0. Report and ignore. */
- PRINT_WARN("Non-error sense was found. "
- "Unit-check will be ignored.\n");
return TAPE_IO_SUCCESS;
case 0x21:
/*
* Data streaming not operational. CU will switch to
* interlock mode. Reissue the command.
*/
- PRINT_WARN("Data streaming not operational. "
- "Switching to interlock-mode.\n");
return tape_34xx_erp_retry(request);
case 0x22:
/*
@@ -487,11 +479,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
* error on the lower interface, internal path not usable,
* or error during cartridge load.
*/
- PRINT_WARN("A path equipment check occurred. One of the "
- "following conditions occurred:\n");
- PRINT_WARN("drive adapter error, buffer error on the lower "
- "interface, internal path not usable, error "
- "during cartridge load.\n");
+ dev_warn (&device->cdev->dev, "A path equipment check occurred"
+ " for the tape device\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x24:
/*
@@ -514,7 +503,6 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
* but the hardware isn't capable to do idrc, or a perform
* subsystem func is issued and the CU is not on-line.
*/
- PRINT_WARN ("Function incompatible. Try to switch off idrc\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x2a:
/*
@@ -552,23 +540,26 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
* reading the format id mark or that that format specified
* is not supported by the drive.
*/
- PRINT_WARN("Drive not capable processing the tape format!\n");
+ dev_warn (&device->cdev->dev, "The tape unit cannot process "
+ "the tape format\n");
return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
case 0x30:
/* The medium is write protected. */
- PRINT_WARN("Medium is write protected!\n");
+ dev_warn (&device->cdev->dev, "The tape medium is write-"
+ "protected\n");
return tape_34xx_erp_failed(request, -EACCES);
case 0x32:
// Tension loss. We cannot recover this, it's an I/O error.
- PRINT_WARN("The drive lost tape tension.\n");
+ dev_warn (&device->cdev->dev, "The tape does not have the "
+ "required tape tension\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x33:
/*
* Load Failure. The cartridge was not inserted correctly or
* the tape is not threaded correctly.
*/
- PRINT_WARN("Cartridge load failure. Reload the cartridge "
- "and try again.\n");
+ dev_warn (&device->cdev->dev, "The tape unit failed to load"
+ " the cartridge\n");
tape_34xx_delete_sbid_from(device, 0);
return tape_34xx_erp_failed(request, -EIO);
case 0x34:
@@ -576,8 +567,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
* Unload failure. The drive cannot maintain tape tension
* and control tape movement during an unload operation.
*/
- PRINT_WARN("Failure during cartridge unload. "
- "Please try manually.\n");
+ dev_warn (&device->cdev->dev, "Automatic unloading of the tape"
+ " cartridge failed\n");
if (request->op == TO_RUN)
return tape_34xx_erp_failed(request, -EIO);
return tape_34xx_erp_bug(device, request, irb, sense[3]);
@@ -589,8 +580,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
* - the cartridge loader does not respond correctly
* - a failure occurs during an index, load, or unload cycle
*/
- PRINT_WARN("Equipment check! Please check the drive and "
- "the cartridge loader.\n");
+ dev_warn (&device->cdev->dev, "An equipment check has occurred"
+ " on the tape unit\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x36:
if (device->cdev->id.driver_info == tape_3490)
@@ -603,7 +594,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
* Tape length error. The tape is shorter than reported in
* the beginning-of-tape data.
*/
- PRINT_WARN("Tape length error.\n");
+ dev_warn (&device->cdev->dev, "The tape information states an"
+ " incorrect length\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x38:
/*
@@ -620,12 +612,12 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
return tape_34xx_erp_failed(request, -EIO);
case 0x3a:
/* Drive switched to not ready. */
- PRINT_WARN("Drive not ready. Turn the ready/not ready switch "
- "to ready position and try again.\n");
+ dev_warn (&device->cdev->dev, "The tape unit is not ready\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x3b:
/* Manual rewind or unload. This causes an I/O error. */
- PRINT_WARN("Medium was rewound or unloaded manually.\n");
+ dev_warn (&device->cdev->dev, "The tape medium has been "
+ "rewound or unloaded manually\n");
tape_34xx_delete_sbid_from(device, 0);
return tape_34xx_erp_failed(request, -EIO);
case 0x42:
@@ -633,7 +625,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
* Degraded mode. A condition that can cause degraded
* performance is detected.
*/
- PRINT_WARN("Subsystem is running in degraded mode.\n");
+ dev_warn (&device->cdev->dev, "The tape subsystem is running "
+ "in degraded mode\n");
return tape_34xx_erp_retry(request);
case 0x43:
/* Drive not ready. */
@@ -652,7 +645,6 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
break;
}
}
- PRINT_WARN("The drive is not ready.\n");
return tape_34xx_erp_failed(request, -ENOMEDIUM);
case 0x44:
/* Locate Block unsuccessful. */
@@ -663,7 +655,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
return tape_34xx_erp_failed(request, -EIO);
case 0x45:
/* The drive is assigned to a different channel path. */
- PRINT_WARN("The drive is assigned elsewhere.\n");
+ dev_warn (&device->cdev->dev, "The tape unit is already "
+ "assigned\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x46:
/*
@@ -671,11 +664,12 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
* the power supply may be switched off or
* the drive address may not be set correctly.
*/
- PRINT_WARN("The drive is not on-line.");
+ dev_warn (&device->cdev->dev, "The tape unit is not online\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x47:
/* Volume fenced. CU reports volume integrity is lost. */
- PRINT_WARN("Volume fenced. The volume integrity is lost.\n");
+ dev_warn (&device->cdev->dev, "The control unit has fenced "
+ "access to the tape volume\n");
tape_34xx_delete_sbid_from(device, 0);
return tape_34xx_erp_failed(request, -EIO);
case 0x48:
@@ -683,20 +677,21 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
return tape_34xx_erp_retry(request);
case 0x49:
/* Bus out check. A parity check error on the bus was found. */
- PRINT_WARN("Bus out check. A data transfer over the bus "
- "has been corrupted.\n");
+ dev_warn (&device->cdev->dev, "A parity error occurred on the "
+ "tape bus\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x4a:
/* Control unit erp failed. */
- PRINT_WARN("The control unit I/O error recovery failed.\n");
+ dev_warn (&device->cdev->dev, "I/O error recovery failed on "
+ "the tape control unit\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x4b:
/*
* CU and drive incompatible. The drive requests micro-program
* patches, which are not available on the CU.
*/
- PRINT_WARN("The drive needs microprogram patches from the "
- "control unit, which are not available.\n");
+ dev_warn (&device->cdev->dev, "The tape unit requires a "
+ "firmware update\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x4c:
/*
@@ -721,8 +716,8 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
* the block to be written is larger than allowed for
* buffered mode.
*/
- PRINT_WARN("Maximum block size for buffered "
- "mode exceeded.\n");
+ dev_warn (&device->cdev->dev, "The maximum block size"
+ " for buffered mode is exceeded\n");
return tape_34xx_erp_failed(request, -ENOBUFS);
}
/* This erpa is reserved for 3480. */
@@ -759,22 +754,20 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
return tape_34xx_erp_retry(request);
case 0x55:
/* Channel interface recovery (permanent). */
- PRINT_WARN("A permanent channel interface error occurred.\n");
+ dev_warn (&device->cdev->dev, "A channel interface error cannot be"
+ " recovered\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x56:
/* Channel protocol error. */
- PRINT_WARN("A channel protocol error occurred.\n");
+ dev_warn (&device->cdev->dev, "A channel protocol error "
+ "occurred\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x57:
if (device->cdev->id.driver_info == tape_3480) {
/* Attention intercept. */
- PRINT_WARN("An attention intercept occurred, "
- "which will be recovered.\n");
return tape_34xx_erp_retry(request);
} else {
/* Global status intercept. */
- PRINT_WARN("An global status intercept was received, "
- "which will be recovered.\n");
return tape_34xx_erp_retry(request);
}
case 0x5a:
@@ -782,42 +775,31 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
* Tape length incompatible. The tape inserted is too long,
* which could cause damage to the tape or the drive.
*/
- PRINT_WARN("Tape Length Incompatible\n");
- PRINT_WARN("Tape length exceeds IBM enhanced capacity "
- "cartdridge length or a medium\n");
- PRINT_WARN("with EC-CST identification mark has been mounted "
- "in a device that writes\n");
- PRINT_WARN("3480 or 3480 XF format.\n");
+ dev_warn (&device->cdev->dev, "The tape unit does not support "
+ "the tape length\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x5b:
/* Format 3480 XF incompatible */
if (sense[1] & SENSE_BEGINNING_OF_TAPE)
/* The tape will get overwritten. */
return tape_34xx_erp_retry(request);
- PRINT_WARN("Format 3480 XF Incompatible\n");
- PRINT_WARN("Medium has been created in 3480 format. "
- "To change the format writes\n");
- PRINT_WARN("must be issued at BOT.\n");
+ dev_warn (&device->cdev->dev, "The tape unit does not support"
+ " format 3480 XF\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x5c:
/* Format 3480-2 XF incompatible */
- PRINT_WARN("Format 3480-2 XF Incompatible\n");
- PRINT_WARN("Device can only read 3480 or 3480 XF format.\n");
+ dev_warn (&device->cdev->dev, "The tape unit does not support tape "
+ "format 3480-2 XF\n");
return tape_34xx_erp_failed(request, -EIO);
case 0x5d:
/* Tape length violation. */
- PRINT_WARN("Tape Length Violation\n");
- PRINT_WARN("The mounted tape exceeds IBM Enhanced Capacity "
- "Cartdridge System Tape length.\n");
- PRINT_WARN("This may cause damage to the drive or tape when "
- "processing to the EOV\n");
+ dev_warn (&device->cdev->dev, "The tape unit does not support"
+ " the current tape length\n");
return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
case 0x5e:
/* Compaction algorithm incompatible. */
- PRINT_WARN("Compaction Algorithm Incompatible\n");
- PRINT_WARN("The volume is recorded using an incompatible "
- "compaction algorithm,\n");
- PRINT_WARN("which is not supported by the device.\n");
+ dev_warn (&device->cdev->dev, "The tape unit does not support"
+ " the compaction algorithm\n");
return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
/* The following erpas should have been covered earlier. */
@@ -848,7 +830,6 @@ tape_34xx_irq(struct tape_device *device, struct tape_request *request,
(irb->scsw.cmd.dstat & DEV_STAT_DEV_END) &&
(request->op == TO_WRI)) {
/* Write at end of volume */
- PRINT_INFO("End of volume\n"); /* XXX */
return tape_34xx_erp_failed(request, -ENOSPC);
}
@@ -869,9 +850,7 @@ tape_34xx_irq(struct tape_device *device, struct tape_request *request,
}
DBF_EVENT(6, "xunknownirq\n");
- PRINT_ERR("Unexpected interrupt.\n");
- PRINT_ERR("Current op is: %s", tape_op_verbose[request->op]);
- tape_dump_sense(device, request, irb);
+ tape_dump_sense_dbf(device, request, irb);
return TAPE_IO_STOP;
}