summaryrefslogtreecommitdiffstats
path: root/drivers/s390/net/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/s390/net/Kconfig')
-rw-r--r--drivers/s390/net/Kconfig84
1 files changed, 45 insertions, 39 deletions
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index eada69dec4f..a7745c82b4a 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -5,22 +5,25 @@ config LCS
tristate "Lan Channel Station Interface"
depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
help
- Select this option if you want to use LCS networking on IBM S/390
- or zSeries. This device driver supports Token Ring (IEEE 802.5),
- FDDI (IEEE 802.7) and Ethernet.
- This option is also available as a module which will be
- called lcs.ko. If you do not know what it is, it's safe to say "Y".
+ Select this option if you want to use LCS networking on IBM System z.
+ This device driver supports Token Ring (IEEE 802.5),
+ FDDI (IEEE 802.7) and Ethernet.
+ To compile as a module, choose M. The module name is lcs.ko.
+ If you do not know what it is, it's safe to choose Y.
-config CTC
- tristate "CTC device support"
+config CTCM
+ tristate "CTC and MPC SNA device support"
depends on CCW && NETDEVICES
help
- Select this option if you want to use channel-to-channel networking
- on IBM S/390 or zSeries. This device driver supports real CTC
- coupling using ESCON. It also supports virtual CTCs when running
- under VM. It will use the channel device configuration if this is
- available. This option is also available as a module which will be
- called ctc.ko. If you do not know what it is, it's safe to say "Y".
+ Select this option if you want to use channel-to-channel
+ point-to-point networking on IBM System z.
+ This device driver supports real CTC coupling using ESCON.
+ It also supports virtual CTCs when running under VM.
+ This driver also supports channel-to-channel MPC SNA devices.
+ MPC is an SNA protocol device used by Communication Server for Linux.
+ To compile as a module, choose M. The module name is ctcm.ko.
+ To compile into the kernel, choose Y.
+ If you do not need any channel-to-channel connection, choose N.
config NETIUCV
tristate "IUCV network device support (VM only)"
@@ -29,9 +32,9 @@ config NETIUCV
Select this option if you want to use inter-user communication
vehicle networking under VM or VIF. It enables a fast communication
link between VM guests. Using ifconfig a point-to-point connection
- can be established to the Linux for zSeries and S7390 system
- running on the other VM guest. This option is also available
- as a module which will be called netiucv.ko. If unsure, say "Y".
+ can be established to the Linux on IBM System z
+ running on the other VM guest. To compile as a module, choose M.
+ The module name is netiucv.ko. If unsure, choose Y.
config SMSGIUCV
tristate "IUCV special message support (VM only)"
@@ -47,43 +50,46 @@ config CLAW
This driver supports channel attached CLAW devices.
CLAW is Common Link Access for Workstation. Common devices
that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices.
- To compile as a module choose M here: The module will be called
- claw.ko to compile into the kernel choose Y
+ To compile as a module, choose M. The module name is claw.ko.
+ To compile into the kernel, choose Y.
config QETH
tristate "Gigabit Ethernet device support"
depends on CCW && NETDEVICES && IP_MULTICAST && QDIO
help
- This driver supports the IBM S/390 and zSeries OSA Express adapters
+ This driver supports the IBM System z OSA Express adapters
in QDIO mode (all media types), HiperSockets interfaces and VM GuestLAN
interfaces in QDIO and HIPER mode.
- For details please refer to the documentation provided by IBM at
- <http://www10.software.ibm.com/developerworks/opensource/linux390>
+ For details please refer to the documentation provided by IBM at
+ <http://www.ibm.com/developerworks/linux/linux390>
- To compile this driver as a module, choose M here: the
- module will be called qeth.ko.
+ To compile this driver as a module, choose M.
+ The module name is qeth.ko.
+config QETH_L2
+ tristate "qeth layer 2 device support"
+ depends on QETH
+ help
+ Select this option to be able to run qeth devices in layer 2 mode.
+ To compile as a module, choose M. The module name is qeth_l2.ko.
+ If unsure, choose y.
-comment "Gigabit Ethernet default settings"
- depends on QETH
+config QETH_L3
+ tristate "qeth layer 3 device support"
+ depends on QETH
+ help
+ Select this option to be able to run qeth devices in layer 3 mode.
+ To compile as a module choose M. The module name is qeth_l3.ko.
+ If unsure, choose Y.
config QETH_IPV6
- bool "IPv6 support for gigabit ethernet"
- depends on (QETH = IPV6) || (QETH && IPV6 = 'y')
- help
- If CONFIG_QETH is switched on, this option will include IPv6
- support in the qeth device driver.
-
-config QETH_VLAN
- bool "VLAN support for gigabit ethernet"
- depends on (QETH = VLAN_8021Q) || (QETH && VLAN_8021Q = 'y')
- help
- If CONFIG_QETH is switched on, this option will include IEEE
- 802.1q VLAN support in the qeth device driver.
+ bool
+ depends on (QETH_L3 = IPV6) || (QETH_L3 && IPV6 = 'y')
+ default y
config CCWGROUP
- tristate
- default (LCS || CTC || QETH)
+ tristate
+ default (LCS || CTCM || QETH)
endmenu