summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/aacraid/linit.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aacraid/linit.c')
-rw-r--r--drivers/scsi/aacraid/linit.c35
1 files changed, 17 insertions, 18 deletions
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index e42a479ce64..359e7ddfdb4 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -82,6 +82,8 @@ static LIST_HEAD(aac_devices);
static int aac_cfg_major = -1;
char aac_driver_version[] = AAC_DRIVER_FULL_VERSION;
+extern int expose_physicals;
+
/*
* Because of the way Linux names scsi devices, the order in this table has
* become important. Check for on-board Raid first, add-in cards second.
@@ -394,6 +396,7 @@ static int aac_slave_configure(struct scsi_device *sdev)
sdev->skip_ms_page_3f = 1;
}
if ((sdev->type == TYPE_DISK) &&
+ !expose_physicals &&
(sdev_channel(sdev) != CONTAINER_CHANNEL)) {
struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
if (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))
@@ -454,17 +457,17 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n",
AAC_DRIVERNAME);
aac = (struct aac_dev *)host->hostdata;
- if (aac_adapter_check_health(aac)) {
- printk(KERN_ERR "%s: Host adapter appears dead\n",
- AAC_DRIVERNAME);
- return -ENODEV;
- }
+
+ if ((count = aac_check_health(aac)))
+ return count;
/*
* Wait for all commands to complete to this specific
* target (block maximum 60 seconds).
*/
for (count = 60; count; --count) {
- int active = 0;
+ int active = aac->in_reset;
+
+ if (active == 0)
__shost_for_each_device(dev, host) {
spin_lock_irqsave(&dev->list_lock, flags);
list_for_each_entry(command, &dev->cmd_list, list) {
@@ -864,13 +867,6 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
* Map in the registers from the adapter.
*/
aac->base_size = AAC_MIN_FOOTPRINT_SIZE;
- if ((aac->regs.sa = ioremap(
- (unsigned long)aac->scsi_host_ptr->base, AAC_MIN_FOOTPRINT_SIZE))
- == NULL) {
- printk(KERN_WARNING "%s: unable to map adapter.\n",
- AAC_DRIVERNAME);
- goto out_free_fibs;
- }
if ((*aac_drivers[index].init)(aac))
goto out_unmap;
@@ -928,12 +924,12 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
* all containers are on the virtual channel 0 (CONTAINER_CHANNEL)
* physical channels are address by their actual physical number+1
*/
- if (aac->nondasd_support == 1)
+ if ((aac->nondasd_support == 1) || expose_physicals)
shost->max_channel = aac->maximum_num_channels;
else
shost->max_channel = 0;
- aac_get_config_status(aac);
+ aac_get_config_status(aac, 0);
aac_get_containers(aac);
list_add(&aac->entry, insert);
@@ -969,8 +965,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
aac_fib_map_free(aac);
pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
kfree(aac->queues);
- iounmap(aac->regs.sa);
- out_free_fibs:
+ aac_adapter_ioremap(aac, 0);
kfree(aac->fibs);
kfree(aac->fsa_dev);
out_free_host:
@@ -1005,7 +1000,7 @@ static void __devexit aac_remove_one(struct pci_dev *pdev)
kfree(aac->queues);
free_irq(pdev->irq, aac);
- iounmap(aac->regs.sa);
+ aac_adapter_ioremap(aac, 0);
kfree(aac->fibs);
kfree(aac->fsa_dev);
@@ -1013,6 +1008,10 @@ static void __devexit aac_remove_one(struct pci_dev *pdev)
list_del(&aac->entry);
scsi_host_put(shost);
pci_disable_device(pdev);
+ if (list_empty(&aac_devices)) {
+ unregister_chrdev(aac_cfg_major, "aac");
+ aac_cfg_major = -1;
+ }
}
static struct pci_driver aac_pci_driver = {