diff options
Diffstat (limited to 'drivers/scsi/aacraid/linit.c')
| -rw-r--r-- | drivers/scsi/aacraid/linit.c | 65 |
1 files changed, 59 insertions, 6 deletions
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 0f948c2fb60..350ea7feb61 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -5,7 +5,7 @@ * based on the old aacraid driver that is.. * Adaptec aacraid device driver for Linux. * - * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com) + * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -82,8 +82,6 @@ static LIST_HEAD(aac_devices); static int aac_cfg_major = -1; char aac_driver_version[] = AAC_DRIVER_FULL_VERSION; -extern int expose_physicals; - /* * Because of the way Linux names scsi devices, the order in this table has * become important. Check for on-board Raid first, add-in cards second. @@ -247,7 +245,19 @@ static struct aac_driver_ident aac_drivers[] = { static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { + struct Scsi_Host *host = cmd->device->host; + struct aac_dev *dev = (struct aac_dev *)host->hostdata; + u32 count = 0; cmd->scsi_done = done; + for (; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) { + struct fib * fib = &dev->fibs[count]; + struct scsi_cmnd * command; + if (fib->hw_fib_va->header.XferState && + ((command = fib->callback_data)) && + (command == cmd) && + (cmd->SCp.phase == AAC_OWNER_FIRMWARE)) + return 0; /* Already owned by Adapter */ + } cmd->SCp.phase = AAC_OWNER_LOWLEVEL; return (aac_scsi_cmd(cmd) ? FAILED : 0); } @@ -446,6 +456,40 @@ static int aac_ioctl(struct scsi_device *sdev, int cmd, void __user * arg) return aac_do_ioctl(dev, cmd, arg); } +static int aac_eh_abort(struct scsi_cmnd* cmd) +{ + struct scsi_device * dev = cmd->device; + struct Scsi_Host * host = dev->host; + struct aac_dev * aac = (struct aac_dev *)host->hostdata; + int count; + int ret = FAILED; + + printk(KERN_ERR "%s: Host adapter abort request (%d,%d,%d,%d)\n", + AAC_DRIVERNAME, + host->host_no, sdev_channel(dev), sdev_id(dev), dev->lun); + switch (cmd->cmnd[0]) { + case SERVICE_ACTION_IN: + if (!(aac->raw_io_interface) || + !(aac->raw_io_64) || + ((cmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16)) + break; + case INQUIRY: + case READ_CAPACITY: + case TEST_UNIT_READY: + /* Mark associated FIB to not complete, eh handler does this */ + for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) { + struct fib * fib = &aac->fibs[count]; + if (fib->hw_fib_va->header.XferState && + (fib->callback_data == cmd)) { + fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT; + cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER; + ret = SUCCESS; + } + } + } + return ret; +} + /* * aac_eh_reset - Reset command handling * @scsi_cmd: SCSI command block causing the reset @@ -457,12 +501,20 @@ static int aac_eh_reset(struct scsi_cmnd* cmd) struct Scsi_Host * host = dev->host; struct scsi_cmnd * command; int count; - struct aac_dev * aac; + struct aac_dev * aac = (struct aac_dev *)host->hostdata; unsigned long flags; + /* Mark the associated FIB to not complete, eh handler does this */ + for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) { + struct fib * fib = &aac->fibs[count]; + if (fib->hw_fib_va->header.XferState && + (fib->callback_data == cmd)) { + fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT; + cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER; + } + } printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n", AAC_DRIVERNAME); - aac = (struct aac_dev *)host->hostdata; if ((count = aac_check_health(aac))) return count; @@ -496,7 +548,7 @@ static int aac_eh_reset(struct scsi_cmnd* cmd) ssleep(1); } printk(KERN_ERR "%s: SCSI bus appears hung\n", AAC_DRIVERNAME); - return -ETIMEDOUT; + return SUCCESS; /* Cause an immediate retry of the command with a ten second delay after successful tur */ } /** @@ -796,6 +848,7 @@ static struct scsi_host_template aac_driver_template = { .bios_param = aac_biosparm, .shost_attrs = aac_attrs, .slave_configure = aac_slave_configure, + .eh_abort_handler = aac_eh_abort, .eh_host_reset_handler = aac_eh_reset, .can_queue = AAC_NUM_IO_FIB, .this_id = MAXIMUM_NUM_CONTAINERS, |