summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/aacraid/rkt.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aacraid/rkt.c')
-rw-r--r--drivers/scsi/aacraid/rkt.c178
1 files changed, 112 insertions, 66 deletions
diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c
index 557287a0b80..e9b775d6bec 100644
--- a/drivers/scsi/aacraid/rkt.c
+++ b/drivers/scsi/aacraid/rkt.c
@@ -49,40 +49,57 @@
static irqreturn_t aac_rkt_intr(int irq, void *dev_id, struct pt_regs *regs)
{
struct aac_dev *dev = dev_id;
- unsigned long bellbits;
- u8 intstat, mask;
- intstat = rkt_readb(dev, MUnit.OISR);
- /*
- * Read mask and invert because drawbridge is reversed.
- * This allows us to only service interrupts that have
- * been enabled.
- */
- mask = ~(dev->OIMR);
- /* Check to see if this is our interrupt. If it isn't just return */
- if (intstat & mask)
- {
- bellbits = rkt_readl(dev, OutboundDoorbellReg);
- if (bellbits & DoorBellPrintfReady) {
- aac_printf(dev, rkt_readl(dev, IndexRegs.Mailbox[5]));
- rkt_writel(dev, MUnit.ODR,DoorBellPrintfReady);
- rkt_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
- }
- else if (bellbits & DoorBellAdapterNormCmdReady) {
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
- aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
- }
- else if (bellbits & DoorBellAdapterNormRespReady) {
- aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
- rkt_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
- }
- else if (bellbits & DoorBellAdapterNormCmdNotFull) {
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+
+ if (dev->new_comm_interface) {
+ u32 Index = rkt_readl(dev, MUnit.OutboundQueue);
+ if (Index == 0xFFFFFFFFL)
+ Index = rkt_readl(dev, MUnit.OutboundQueue);
+ if (Index != 0xFFFFFFFFL) {
+ do {
+ if (aac_intr_normal(dev, Index)) {
+ rkt_writel(dev, MUnit.OutboundQueue, Index);
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespReady);
+ }
+ Index = rkt_readl(dev, MUnit.OutboundQueue);
+ } while (Index != 0xFFFFFFFFL);
+ return IRQ_HANDLED;
}
- else if (bellbits & DoorBellAdapterNormRespNotFull) {
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
- rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
+ } else {
+ unsigned long bellbits;
+ u8 intstat;
+ intstat = rkt_readb(dev, MUnit.OISR);
+ /*
+ * Read mask and invert because drawbridge is reversed.
+ * This allows us to only service interrupts that have
+ * been enabled.
+ * Check to see if this is our interrupt. If it isn't just return
+ */
+ if (intstat & ~(dev->OIMR))
+ {
+ bellbits = rkt_readl(dev, OutboundDoorbellReg);
+ if (bellbits & DoorBellPrintfReady) {
+ aac_printf(dev, rkt_readl (dev, IndexRegs.Mailbox[5]));
+ rkt_writel(dev, MUnit.ODR,DoorBellPrintfReady);
+ rkt_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdReady) {
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
+ aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
+// rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
+ }
+ else if (bellbits & DoorBellAdapterNormRespReady) {
+ rkt_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
+ aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
+ }
+ else if (bellbits & DoorBellAdapterNormCmdNotFull) {
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ }
+ else if (bellbits & DoorBellAdapterNormRespNotFull) {
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+ rkt_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
+ }
+ return IRQ_HANDLED;
}
- return IRQ_HANDLED;
}
return IRQ_NONE;
}
@@ -166,14 +183,16 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command,
/*
* Yield the processor in case we are slow
*/
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
+ schedule_timeout_uninterruptible(1);
}
if (ok != 1) {
/*
* Restore interrupt mask even though we timed out
*/
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+ if (dev->new_comm_interface)
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+ else
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
return -ETIMEDOUT;
}
/*
@@ -196,7 +215,10 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command,
/*
* Restore interrupt mask
*/
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+ if (dev->new_comm_interface)
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+ else
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
return 0;
}
@@ -268,15 +290,6 @@ static void aac_rkt_start_adapter(struct aac_dev *dev)
init = dev->init;
init->HostElapsedSeconds = cpu_to_le32(get_seconds());
- /*
- * First clear out all interrupts. Then enable the one's that we
- * can handle.
- */
- rkt_writeb(dev, MUnit.OIMR, 0xff);
- rkt_writel(dev, MUnit.ODR, 0xffffffff);
-// rkt_writeb(dev, MUnit.OIMR, ~(u8)OUTBOUND_DOORBELL_INTERRUPT_MASK);
- rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
-
// We can only use a 32 bit address here
rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
@@ -350,6 +363,39 @@ static int aac_rkt_check_health(struct aac_dev *dev)
}
/**
+ * aac_rkt_send
+ * @fib: fib to issue
+ *
+ * Will send a fib, returning 0 if successful.
+ */
+static int aac_rkt_send(struct fib * fib)
+{
+ u64 addr = fib->hw_fib_pa;
+ struct aac_dev *dev = fib->dev;
+ volatile void __iomem *device = dev->regs.rkt;
+ u32 Index;
+
+ dprintk((KERN_DEBUG "%p->aac_rkt_send(%p->%llx)\n", dev, fib, addr));
+ Index = rkt_readl(dev, MUnit.InboundQueue);
+ if (Index == 0xFFFFFFFFL)
+ Index = rkt_readl(dev, MUnit.InboundQueue);
+ dprintk((KERN_DEBUG "Index = 0x%x\n", Index));
+ if (Index == 0xFFFFFFFFL)
+ return Index;
+ device += Index;
+ dprintk((KERN_DEBUG "entry = %x %x %u\n", (u32)(addr & 0xffffffff),
+ (u32)(addr >> 32), (u32)le16_to_cpu(fib->hw_fib->header.Size)));
+ writel((u32)(addr & 0xffffffff), device);
+ device += sizeof(u32);
+ writel((u32)(addr >> 32), device);
+ device += sizeof(u32);
+ writel(le16_to_cpu(fib->hw_fib->header.Size), device);
+ rkt_writel(dev, MUnit.InboundQueue, Index);
+ dprintk((KERN_DEBUG "aac_rkt_send - return 0\n"));
+ return 0;
+}
+
+/**
* aac_rkt_init - initialize an i960 based AAC card
* @dev: device to configure
*
@@ -369,13 +415,8 @@ int aac_rkt_init(struct aac_dev *dev)
name = dev->name;
/*
- * Map in the registers from the adapter.
+ * Check to see if the board panic'd while booting.
*/
- if((dev->regs.rkt = ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL)
- {
- printk(KERN_WARNING "aacraid: unable to map i960.\n" );
- goto error_iounmap;
- }
/*
* Check to see if the board failed any self tests.
*/
@@ -410,8 +451,7 @@ int aac_rkt_init(struct aac_dev *dev)
dev->name, instance, status);
goto error_iounmap;
}
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
+ schedule_timeout_uninterruptible(1);
}
if (request_irq(dev->scsi_host_ptr->irq, aac_rkt_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0)
{
@@ -426,6 +466,7 @@ int aac_rkt_init(struct aac_dev *dev)
dev->a_ops.adapter_notify = aac_rkt_notify_adapter;
dev->a_ops.adapter_sync_cmd = rkt_sync_cmd;
dev->a_ops.adapter_check_health = aac_rkt_check_health;
+ dev->a_ops.adapter_send = aac_rkt_send;
/*
* First clear out all interrupts. Then enable the one's that we
@@ -437,15 +478,24 @@ int aac_rkt_init(struct aac_dev *dev)
if (aac_init_adapter(dev) == NULL)
goto error_irq;
- /*
- * Start any kernel threads needed
- */
- dev->thread_pid = kernel_thread((int (*)(void *))aac_command_thread, dev, 0);
- if(dev->thread_pid < 0)
- {
- printk(KERN_ERR "aacraid: Unable to create rkt thread.\n");
- goto error_kfree;
- }
+ if (dev->new_comm_interface) {
+ /*
+ * FIB Setup has already been done, but we can minimize the
+ * damage by at least ensuring the OS never issues more
+ * commands than we can handle. The Rocket adapters currently
+ * can only handle 246 commands and 8 AIFs at the same time,
+ * and in fact do notify us accordingly if we negotiate the
+ * FIB size. The problem that causes us to add this check is
+ * to ensure that we do not overdo it with the adapter when a
+ * hard coded FIB override is being utilized. This special
+ * case warrants this half baked, but convenient, check here.
+ */
+ if (dev->scsi_host_ptr->can_queue > (246 - AAC_NUM_MGT_FIB)) {
+ dev->init->MaxIoCommands = cpu_to_le32(246);
+ dev->scsi_host_ptr->can_queue = 246 - AAC_NUM_MGT_FIB;
+ }
+ rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+ }
/*
* Tell the adapter that all is configured, and it can start
* accepting requests
@@ -453,15 +503,11 @@ int aac_rkt_init(struct aac_dev *dev)
aac_rkt_start_adapter(dev);
return 0;
-error_kfree:
- kfree(dev->queues);
-
error_irq:
rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
free_irq(dev->scsi_host_ptr->irq, (void *)dev);
error_iounmap:
- iounmap(dev->regs.rkt);
return -1;
}