diff options
Diffstat (limited to 'drivers/scsi/aacraid/src.c')
-rw-r--r-- | drivers/scsi/aacraid/src.c | 293 |
1 files changed, 242 insertions, 51 deletions
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index 957595a7a45..2bee51506a9 100644 --- a/drivers/scsi/aacraid/src.c +++ b/drivers/scsi/aacraid/src.c @@ -96,6 +96,38 @@ static irqreturn_t aac_src_intr_message(int irq, void *dev_id) our_interrupt = 1; /* handle AIF */ aac_intr_normal(dev, 0, 2, 0, NULL); + } else if (bellbits_shifted & OUTBOUNDDOORBELL_0) { + unsigned long sflags; + struct list_head *entry; + int send_it = 0; + + if (dev->sync_fib) { + our_interrupt = 1; + if (dev->sync_fib->callback) + dev->sync_fib->callback(dev->sync_fib->callback_data, + dev->sync_fib); + spin_lock_irqsave(&dev->sync_fib->event_lock, sflags); + if (dev->sync_fib->flags & FIB_CONTEXT_FLAG_WAIT) { + dev->management_fib_count--; + up(&dev->sync_fib->event_wait); + } + spin_unlock_irqrestore(&dev->sync_fib->event_lock, sflags); + spin_lock_irqsave(&dev->sync_lock, sflags); + if (!list_empty(&dev->sync_fib_list)) { + entry = dev->sync_fib_list.next; + dev->sync_fib = list_entry(entry, struct fib, fiblink); + list_del(entry); + send_it = 1; + } else { + dev->sync_fib = NULL; + } + spin_unlock_irqrestore(&dev->sync_lock, sflags); + if (send_it) { + aac_adapter_sync_cmd(dev, SEND_SYNCHRONOUS_FIB, + (u32)dev->sync_fib->hw_fib_pa, 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); + } + } } } @@ -177,56 +209,63 @@ static int src_sync_cmd(struct aac_dev *dev, u32 command, */ src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT); - ok = 0; - start = jiffies; + if (!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) { + ok = 0; + start = jiffies; - /* - * Wait up to 30 seconds - */ - while (time_before(jiffies, start+30*HZ)) { - /* Delay 5 microseconds to let Mon960 get info. */ - udelay(5); - - /* Mon960 will set doorbell0 bit - * when it has completed the command + /* + * Wait up to 5 minutes */ - if ((src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT) & OUTBOUNDDOORBELL_0) { - /* Clear the doorbell */ - src_writel(dev, - MUnit.ODR_C, - OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT); - ok = 1; - break; + while (time_before(jiffies, start+300*HZ)) { + udelay(5); /* Delay 5 microseconds to let Mon960 get info. */ + /* + * Mon960 will set doorbell0 bit when it has completed the command. + */ + if ((src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT) & OUTBOUNDDOORBELL_0) { + /* + * Clear the doorbell. + */ + src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT); + ok = 1; + break; + } + /* + * Yield the processor in case we are slow + */ + msleep(1); } - - /* Yield the processor in case we are slow */ - msleep(1); - } - if (unlikely(ok != 1)) { - /* Restore interrupt mask even though we timed out */ - aac_adapter_enable_int(dev); - return -ETIMEDOUT; + if (unlikely(ok != 1)) { + /* + * Restore interrupt mask even though we timed out + */ + aac_adapter_enable_int(dev); + return -ETIMEDOUT; + } + /* + * Pull the synch status from Mailbox 0. + */ + if (status) + *status = readl(&dev->IndexRegs->Mailbox[0]); + if (r1) + *r1 = readl(&dev->IndexRegs->Mailbox[1]); + if (r2) + *r2 = readl(&dev->IndexRegs->Mailbox[2]); + if (r3) + *r3 = readl(&dev->IndexRegs->Mailbox[3]); + if (r4) + *r4 = readl(&dev->IndexRegs->Mailbox[4]); + + /* + * Clear the synch command doorbell. + */ + src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT); } - /* Pull the synch status from Mailbox 0 */ - if (status) - *status = readl(&dev->IndexRegs->Mailbox[0]); - if (r1) - *r1 = readl(&dev->IndexRegs->Mailbox[1]); - if (r2) - *r2 = readl(&dev->IndexRegs->Mailbox[2]); - if (r3) - *r3 = readl(&dev->IndexRegs->Mailbox[3]); - if (r4) - *r4 = readl(&dev->IndexRegs->Mailbox[4]); - - /* Clear the synch command doorbell */ - src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT); - - /* Restore interrupt mask */ + /* + * Restore interrupt mask + */ aac_adapter_enable_int(dev); return 0; - } /** @@ -386,9 +425,7 @@ static int aac_src_ioremap(struct aac_dev *dev, u32 size) { if (!size) { iounmap(dev->regs.src.bar0); - dev->regs.src.bar0 = NULL; - iounmap(dev->base); - dev->base = NULL; + dev->base = dev->regs.src.bar0 = NULL; return 0; } dev->regs.src.bar1 = ioremap(pci_resource_start(dev->pdev, 2), @@ -404,7 +441,27 @@ static int aac_src_ioremap(struct aac_dev *dev, u32 size) return -1; } dev->IndexRegs = &((struct src_registers __iomem *) - dev->base)->IndexRegs; + dev->base)->u.tupelo.IndexRegs; + return 0; +} + +/** + * aac_srcv_ioremap + * @size: mapping resize request + * + */ +static int aac_srcv_ioremap(struct aac_dev *dev, u32 size) +{ + if (!size) { + iounmap(dev->regs.src.bar0); + dev->base = dev->regs.src.bar0 = NULL; + return 0; + } + dev->base = dev->regs.src.bar0 = ioremap(dev->scsi_host_ptr->base, size); + if (dev->base == NULL) + return -1; + dev->IndexRegs = &((struct src_registers __iomem *) + dev->base)->u.denali.IndexRegs; return 0; } @@ -419,7 +476,7 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled) bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS, 0, 0, 0, 0, 0, 0, &var, &reset_mask, NULL, NULL, NULL); if (bled || (var != 0x00000001)) - bled = -EINVAL; + return -EINVAL; if (dev->supplement_adapter_info.SupportedOptions2 & AAC_OPTION_DOORBELL_RESET) { src_writel(dev, MUnit.IDR, reset_mask); @@ -579,15 +636,149 @@ int aac_src_init(struct aac_dev *dev) dev->dbg_size = AAC_MIN_SRC_BAR1_SIZE; aac_adapter_enable_int(dev); + + if (!dev->sync_mode) { + /* + * Tell the adapter that all is configured, and it can + * start accepting requests + */ + aac_src_start_adapter(dev); + } + return 0; + +error_iounmap: + + return -1; +} + +/** + * aac_srcv_init - initialize an SRCv card + * @dev: device to configure + * + */ + +int aac_srcv_init(struct aac_dev *dev) +{ + unsigned long start; + unsigned long status; + int restart = 0; + int instance = dev->id; + const char *name = dev->name; + + dev->a_ops.adapter_ioremap = aac_srcv_ioremap; + dev->a_ops.adapter_comm = aac_src_select_comm; + + dev->base_size = AAC_MIN_SRCV_BAR0_SIZE; + if (aac_adapter_ioremap(dev, dev->base_size)) { + printk(KERN_WARNING "%s: unable to map adapter.\n", name); + goto error_iounmap; + } + + /* Failure to reset here is an option ... */ + dev->a_ops.adapter_sync_cmd = src_sync_cmd; + dev->a_ops.adapter_enable_int = aac_src_disable_interrupt; + if ((aac_reset_devices || reset_devices) && + !aac_src_restart_adapter(dev, 0)) + ++restart; /* - * Tell the adapter that all is configured, and it can - * start accepting requests + * Check to see if the board panic'd while booting. */ - aac_src_start_adapter(dev); + status = src_readl(dev, MUnit.OMR); + if (status & KERNEL_PANIC) { + if (aac_src_restart_adapter(dev, aac_src_check_health(dev))) + goto error_iounmap; + ++restart; + } + /* + * Check to see if the board failed any self tests. + */ + status = src_readl(dev, MUnit.OMR); + if (status & SELF_TEST_FAILED) { + printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance); + goto error_iounmap; + } + /* + * Check to see if the monitor panic'd while booting. + */ + if (status & MONITOR_PANIC) { + printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance); + goto error_iounmap; + } + start = jiffies; + /* + * Wait for the adapter to be up and running. Wait up to 3 minutes + */ + while (!((status = src_readl(dev, MUnit.OMR)) & KERNEL_UP_AND_RUNNING)) { + if ((restart && + (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) || + time_after(jiffies, start+HZ*startup_timeout)) { + printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", + dev->name, instance, status); + goto error_iounmap; + } + if (!restart && + ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) || + time_after(jiffies, start + HZ * + ((startup_timeout > 60) + ? (startup_timeout - 60) + : (startup_timeout / 2))))) { + if (likely(!aac_src_restart_adapter(dev, aac_src_check_health(dev)))) + start = jiffies; + ++restart; + } + msleep(1); + } + if (restart && aac_commit) + aac_commit = 1; + /* + * Fill in the common function dispatch table. + */ + dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter; + dev->a_ops.adapter_disable_int = aac_src_disable_interrupt; + dev->a_ops.adapter_notify = aac_src_notify_adapter; + dev->a_ops.adapter_sync_cmd = src_sync_cmd; + dev->a_ops.adapter_check_health = aac_src_check_health; + dev->a_ops.adapter_restart = aac_src_restart_adapter; + + /* + * First clear out all interrupts. Then enable the one's that we + * can handle. + */ + aac_adapter_comm(dev, AAC_COMM_MESSAGE); + aac_adapter_disable_int(dev); + src_writel(dev, MUnit.ODR_C, 0xffffffff); + aac_adapter_enable_int(dev); + if (aac_init_adapter(dev) == NULL) + goto error_iounmap; + if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1) + goto error_iounmap; + dev->msi = aac_msi && !pci_enable_msi(dev->pdev); + if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr, + IRQF_SHARED|IRQF_DISABLED, "aacraid", dev) < 0) { + if (dev->msi) + pci_disable_msi(dev->pdev); + printk(KERN_ERR "%s%d: Interrupt unavailable.\n", + name, instance); + goto error_iounmap; + } + dev->dbg_base = dev->scsi_host_ptr->base; + dev->dbg_base_mapped = dev->base; + dev->dbg_size = dev->base_size; + + aac_adapter_enable_int(dev); + + if (!dev->sync_mode) { + /* + * Tell the adapter that all is configured, and it can + * start accepting requests + */ + aac_src_start_adapter(dev); + } return 0; error_iounmap: return -1; } + |