diff options
Diffstat (limited to 'drivers/scsi/ata_piix.c')
-rw-r--r-- | drivers/scsi/ata_piix.c | 266 |
1 files changed, 201 insertions, 65 deletions
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 94b1261a259..a9bb3cb7e89 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -105,9 +105,6 @@ enum { PIIX_FLAG_SCR = (1 << 26), /* SCR available */ PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */ PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */ - PIIX_FLAG_COMBINED = (1 << 29), /* combined mode possible */ - /* ICH6/7 use different scheme for map value */ - PIIX_FLAG_COMBINED_ICH6 = PIIX_FLAG_COMBINED | (1 << 30), /* combined mode. if set, PATA is channel 0. * if clear, PATA is channel 1. @@ -126,6 +123,8 @@ enum { ich6_sata = 4, ich6_sata_ahci = 5, ich6m_sata_ahci = 6, + ich7m_sata_ahci = 7, + ich8_sata_ahci = 8, /* constants for mapping table */ P0 = 0, /* port 0 */ @@ -141,11 +140,19 @@ enum { struct piix_map_db { const u32 mask; + const u16 port_enable; + const int present_shift; const int map[][4]; }; +struct piix_host_priv { + const int *map; + const struct piix_map_db *map_db; +}; + static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static void piix_host_stop(struct ata_host_set *host_set); static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); static void piix_pata_error_handler(struct ata_port *ap); @@ -182,15 +189,15 @@ static const struct pci_device_id piix_pci_tbl[] = { /* 82801GB/GR/GH (ICH7, identical to ICH6) */ { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, /* 2801GBM/GHM (ICH7M, identical to ICH6M) */ - { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7m_sata_ahci }, /* Enterprise Southbridge 2 (where's the datasheet?) */ { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, /* SATA Controller 1 IDE (ICH8, no datasheet yet) */ - { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, /* SATA Controller 2 IDE (ICH8, ditto) */ - { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, + { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, /* Mobile SATA Controller IDE (ICH8M, ditto) */ - { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, { } /* terminate list */ }; @@ -254,7 +261,7 @@ static const struct ata_port_operations piix_pata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .host_stop = piix_host_stop, }; static const struct ata_port_operations piix_sata_ops = { @@ -284,11 +291,13 @@ static const struct ata_port_operations piix_sata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .host_stop = piix_host_stop, }; -static struct piix_map_db ich5_map_db = { +static const struct piix_map_db ich5_map_db = { .mask = 0x7, + .port_enable = 0x3, + .present_shift = 4, .map = { /* PM PS SM SS MAP */ { P0, NA, P1, NA }, /* 000b */ @@ -302,8 +311,10 @@ static struct piix_map_db ich5_map_db = { }, }; -static struct piix_map_db ich6_map_db = { +static const struct piix_map_db ich6_map_db = { .mask = 0x3, + .port_enable = 0xf, + .present_shift = 4, .map = { /* PM PS SM SS MAP */ { P0, P2, P1, P3 }, /* 00b */ @@ -313,8 +324,10 @@ static struct piix_map_db ich6_map_db = { }, }; -static struct piix_map_db ich6m_map_db = { +static const struct piix_map_db ich6m_map_db = { .mask = 0x3, + .port_enable = 0x5, + .present_shift = 4, .map = { /* PM PS SM SS MAP */ { P0, P2, RV, RV }, /* 00b */ @@ -324,6 +337,47 @@ static struct piix_map_db ich6m_map_db = { }, }; +static const struct piix_map_db ich7m_map_db = { + .mask = 0x3, + .port_enable = 0x5, + .present_shift = 4, + + /* Map 01b isn't specified in the doc but some notebooks use + * it anyway. ATM, the only case spotted carries subsystem ID + * 1025:0107. This is the only difference from ich6m. + */ + .map = { + /* PM PS SM SS MAP */ + { P0, P2, RV, RV }, /* 00b */ + { IDE, IDE, P1, P3 }, /* 01b */ + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db ich8_map_db = { + .mask = 0x3, + .port_enable = 0x3, + .present_shift = 8, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 00b (hardwired) */ + { RV, RV, RV, RV }, + { RV, RV, RV, RV }, /* 10b (never) */ + { RV, RV, RV, RV }, + }, +}; + +static const struct piix_map_db *piix_map_db_table[] = { + [ich5_sata] = &ich5_map_db, + [esb_sata] = &ich5_map_db, + [ich6_sata] = &ich6_map_db, + [ich6_sata_ahci] = &ich6_map_db, + [ich6m_sata_ahci] = &ich6m_map_db, + [ich7m_sata_ahci] = &ich7m_map_db, + [ich8_sata_ahci] = &ich8_map_db, +}; + static struct ata_port_info piix_port_info[] = { /* piix4_pata */ { @@ -356,63 +410,82 @@ static struct ata_port_info piix_port_info[] = { /* ich5_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED | - PIIX_FLAG_CHECKINTR, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | + PIIX_FLAG_IGNORE_PCS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, - .private_data = &ich5_map_db, }, /* i6300esb_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED | + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, - .private_data = &ich5_map_db, }, /* ich6_sata */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, - .private_data = &ich6_map_db, }, /* ich6_sata_ahci */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, - .private_data = &ich6_map_db, }, /* ich6m_sata_ahci */ { .sht = &piix_sht, - .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 | + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* ich7m_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + + /* ich8_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | PIIX_FLAG_AHCI, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &piix_sata_ops, - .private_data = &ich6m_map_db, }, }; @@ -427,6 +500,11 @@ MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, piix_pci_tbl); MODULE_VERSION(DRV_VERSION); +static int force_pcs = 0; +module_param(force_pcs, int, 0444); +MODULE_PARM_DESC(force_pcs, "force honoring or ignoring PCS to work around " + "device mis-detection (0=default, 1=ignore PCS, 2=honor PCS)"); + /** * piix_pata_cbl_detect - Probe host controller cable detect info * @ap: Port for which cable detect info is desired @@ -491,74 +569,83 @@ static void piix_pata_error_handler(struct ata_port *ap) } /** - * piix_sata_prereset - prereset for SATA host controller + * piix_sata_present_mask - determine present mask for SATA host controller * @ap: Target port * - * Reads and configures SATA PCI device's PCI config register - * Port Configuration and Status (PCS) to determine port and - * device availability. Return -ENODEV to skip reset if no - * device is present. + * Reads SATA PCI device's PCI config register Port Configuration + * and Status (PCS) to determine port and device availability. * * LOCKING: * None (inherited from caller). * * RETURNS: - * 0 if device is present, -ENODEV otherwise. + * determined present_mask */ -static int piix_sata_prereset(struct ata_port *ap) +static unsigned int piix_sata_present_mask(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); - const unsigned int *map = ap->host_set->private_data; + struct piix_host_priv *hpriv = ap->host_set->private_data; + const unsigned int *map = hpriv->map; int base = 2 * ap->hard_port_no; unsigned int present_mask = 0; int port, i; - u8 pcs; + u16 pcs; - pci_read_config_byte(pdev, ICH5_PCS, &pcs); + pci_read_config_word(pdev, ICH5_PCS, &pcs); DPRINTK("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base); - /* enable all ports on this ap and wait for them to settle */ - for (i = 0; i < 2; i++) { - port = map[base + i]; - if (port >= 0) - pcs |= 1 << port; - } - - pci_write_config_byte(pdev, ICH5_PCS, pcs); - msleep(100); - - /* let's see which devices are present */ - pci_read_config_byte(pdev, ICH5_PCS, &pcs); - for (i = 0; i < 2; i++) { port = map[base + i]; if (port < 0) continue; - if (ap->flags & PIIX_FLAG_IGNORE_PCS || pcs & 1 << (4 + port)) + if ((ap->flags & PIIX_FLAG_IGNORE_PCS) || + (pcs & 1 << (hpriv->map_db->present_shift + port))) present_mask |= 1 << i; - else - pcs &= ~(1 << port); } - /* disable offline ports on non-AHCI controllers */ - if (!(ap->flags & PIIX_FLAG_AHCI)) - pci_write_config_byte(pdev, ICH5_PCS, pcs); - DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n", ap->id, pcs, present_mask); - if (!present_mask) { - ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); - ap->eh_context.i.action &= ~ATA_EH_RESET_MASK; - return 0; + return present_mask; +} + +/** + * piix_sata_softreset - reset SATA host port via ATA SRST + * @ap: port to reset + * @classes: resulting classes of attached devices + * + * Reset SATA host port via ATA SRST. On controllers with + * reliable PCS present bits, the bits are used to determine + * device presence. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +static int piix_sata_softreset(struct ata_port *ap, unsigned int *classes) +{ + unsigned int present_mask; + int i, rc; + + present_mask = piix_sata_present_mask(ap); + + rc = ata_std_softreset(ap, classes); + if (rc) + return rc; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + if (!(present_mask & (1 << i))) + classes[i] = ATA_DEV_NONE; } - return ata_std_prereset(ap); + return 0; } static void piix_sata_error_handler(struct ata_port *ap) { - ata_bmdma_drive_eh(ap, piix_sata_prereset, ata_std_softreset, NULL, + ata_bmdma_drive_eh(ap, ata_std_prereset, piix_sata_softreset, NULL, ata_std_postreset); } @@ -761,10 +848,40 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) return no_piix_dma; } +static void __devinit piix_init_pcs(struct pci_dev *pdev, + struct ata_port_info *pinfo, + const struct piix_map_db *map_db) +{ + u16 pcs, new_pcs; + + pci_read_config_word(pdev, ICH5_PCS, &pcs); + + new_pcs = pcs | map_db->port_enable; + + if (new_pcs != pcs) { + DPRINTK("updating PCS from 0x%x to 0x%x\n", pcs, new_pcs); + pci_write_config_word(pdev, ICH5_PCS, new_pcs); + msleep(150); + } + + if (force_pcs == 1) { + dev_printk(KERN_INFO, &pdev->dev, + "force ignoring PCS (0x%x)\n", new_pcs); + pinfo[0].host_flags |= PIIX_FLAG_IGNORE_PCS; + pinfo[1].host_flags |= PIIX_FLAG_IGNORE_PCS; + } else if (force_pcs == 2) { + dev_printk(KERN_INFO, &pdev->dev, + "force honoring PCS (0x%x)\n", new_pcs); + pinfo[0].host_flags &= ~PIIX_FLAG_IGNORE_PCS; + pinfo[1].host_flags &= ~PIIX_FLAG_IGNORE_PCS; + } +} + static void __devinit piix_init_sata_map(struct pci_dev *pdev, - struct ata_port_info *pinfo) + struct ata_port_info *pinfo, + const struct piix_map_db *map_db) { - struct piix_map_db *map_db = pinfo[0].private_data; + struct piix_host_priv *hpriv = pinfo[0].private_data; const unsigned int *map; int i, invalid_map = 0; u8 map_value; @@ -788,6 +905,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, case IDE: WARN_ON((i & 1) || map[i + 1] != IDE); pinfo[i / 2] = piix_port_info[ich5_pata]; + pinfo[i / 2].private_data = hpriv; i++; printk(" IDE IDE"); break; @@ -805,8 +923,8 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, dev_printk(KERN_ERR, &pdev->dev, "invalid MAP value %u\n", map_value); - pinfo[0].private_data = (void *)map; - pinfo[1].private_data = (void *)map; + hpriv->map = map; + hpriv->map_db = map_db; } /** @@ -829,6 +947,7 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) static int printed_version; struct ata_port_info port_info[2]; struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] }; + struct piix_host_priv *hpriv; unsigned long host_flags; if (!printed_version++) @@ -839,8 +958,14 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (!in_module_init) return -ENODEV; + hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + port_info[0] = piix_port_info[ent->driver_data]; port_info[1] = piix_port_info[ent->driver_data]; + port_info[0].private_data = hpriv; + port_info[1].private_data = hpriv; host_flags = port_info[0].host_flags; @@ -855,8 +980,12 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) } /* Initialize SATA map */ - if (host_flags & ATA_FLAG_SATA) - piix_init_sata_map(pdev, port_info); + if (host_flags & ATA_FLAG_SATA) { + piix_init_sata_map(pdev, port_info, + piix_map_db_table[ent->driver_data]); + piix_init_pcs(pdev, port_info, + piix_map_db_table[ent->driver_data]); + } /* On ICH5, some BIOSen disable the interrupt using the * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. @@ -879,6 +1008,13 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return ata_pci_init_one(pdev, ppinfo, 2); } +static void piix_host_stop(struct ata_host_set *host_set) +{ + if (host_set->next == NULL) + kfree(host_set->private_data); + ata_host_stop(host_set); +} + static int __init piix_init(void) { int rc; |