diff options
Diffstat (limited to 'drivers/scsi/ibmmca.c')
| -rw-r--r-- | drivers/scsi/ibmmca.c | 2379 |
1 files changed, 0 insertions, 2379 deletions
diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c deleted file mode 100644 index cd09132d5d7..00000000000 --- a/drivers/scsi/ibmmca.c +++ /dev/null @@ -1,2379 +0,0 @@ -/* - Low Level Linux Driver for the IBM Microchannel SCSI Subsystem for - Linux Kernel >= 2.4.0. - Copyright (c) 1995 Strom Systems, Inc. under the terms of the GNU - General Public License. Written by Martin Kolinek, December 1995. - Further development by: Chris Beauregard, Klaus Kudielka, Michael Lang - See the file Documentation/scsi/ibmmca.txt for a detailed description - of this driver, the commandline arguments and the history of its - development. - See the WWW-page: http://www.uni-mainz.de/~langm000/linux.html for latest - updates, info and ADF-files for adapters supported by this driver. - - Alan Cox <alan@lxorguk.ukuu.org.uk> - Updated for Linux 2.5.45 to use the new error handler, cleaned up the - lock macros and did a few unavoidable locking tweaks, plus one locking - fix in the irq and completion path. - - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/blkdev.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/mca.h> -#include <linux/spinlock.h> -#include <linux/init.h> - -#include <asm/io.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> - -/* Common forward declarations for all Linux-versions: */ -static int ibmmca_queuecommand (struct Scsi_Host *, struct scsi_cmnd *); -static int ibmmca_abort (Scsi_Cmnd *); -static int ibmmca_host_reset (Scsi_Cmnd *); -static int ibmmca_biosparam (struct scsi_device *, struct block_device *, sector_t, int *); -static int ibmmca_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start, off_t offset, int length, int inout); - - - -/* current version of this driver-source: */ -#define IBMMCA_SCSI_DRIVER_VERSION "4.0b-ac" - -/* driver configuration */ -#define IM_MAX_HOSTS 8 /* maximum number of host adapters */ -#define IM_RESET_DELAY 60 /* seconds allowed for a reset */ - -/* driver debugging - #undef all for normal operation */ -/* if defined: count interrupts and ignore this special one: */ -#undef IM_DEBUG_TIMEOUT //50 -#define TIMEOUT_PUN 0 -#define TIMEOUT_LUN 0 -/* verbose interrupt: */ -#undef IM_DEBUG_INT -/* verbose queuecommand: */ -#undef IM_DEBUG_CMD -/* verbose queucommand for specific SCSI-device type: */ -#undef IM_DEBUG_CMD_SPEC_DEV -/* verbose device probing */ -#undef IM_DEBUG_PROBE - -/* device type that shall be displayed on syslog (only during debugging): */ -#define IM_DEBUG_CMD_DEVICE TYPE_TAPE - -/* relative addresses of hardware registers on a subsystem */ -#define IM_CMD_REG(h) ((h)->io_port) /*Command Interface, (4 bytes long) */ -#define IM_ATTN_REG(h) ((h)->io_port+4) /*Attention (1 byte) */ -#define IM_CTR_REG(h) ((h)->io_port+5) /*Basic Control (1 byte) */ -#define IM_INTR_REG(h) ((h)->io_port+6) /*Interrupt Status (1 byte, r/o) */ -#define IM_STAT_REG(h) ((h)->io_port+7) /*Basic Status (1 byte, read only) */ - -/* basic I/O-port of first adapter */ -#define IM_IO_PORT 0x3540 -/* maximum number of hosts that can be found */ -#define IM_N_IO_PORT 8 - -/*requests going into the upper nibble of the Attention register */ -/*note: the lower nibble specifies the device(0-14), or subsystem(15) */ -#define IM_IMM_CMD 0x10 /*immediate command */ -#define IM_SCB 0x30 /*Subsystem Control Block command */ -#define IM_LONG_SCB 0x40 /*long Subsystem Control Block command */ -#define IM_EOI 0xe0 /*end-of-interrupt request */ - -/*values for bits 7,1,0 of Basic Control reg. (bits 6-2 reserved) */ -#define IM_HW_RESET 0x80 /*hardware reset */ -#define IM_ENABLE_DMA 0x02 /*enable subsystem's busmaster DMA */ -#define IM_ENABLE_INTR 0x01 /*enable interrupts to the system */ - -/*to interpret the upper nibble of Interrupt Status register */ -/*note: the lower nibble specifies the device(0-14), or subsystem(15) */ -#define IM_SCB_CMD_COMPLETED 0x10 -#define IM_SCB_CMD_COMPLETED_WITH_RETRIES 0x50 -#define IM_LOOP_SCATTER_BUFFER_FULL 0x60 -#define IM_ADAPTER_HW_FAILURE 0x70 -#define IM_IMMEDIATE_CMD_COMPLETED 0xa0 -#define IM_CMD_COMPLETED_WITH_FAILURE 0xc0 -#define IM_CMD_ERROR 0xe0 -#define IM_SOFTWARE_SEQUENCING_ERROR 0xf0 - -/*to interpret bits 3-0 of Basic Status register (bits 7-4 reserved) */ -#define IM_CMD_REG_FULL 0x08 -#define IM_CMD_REG_EMPTY 0x04 -#define IM_INTR_REQUEST 0x02 -#define IM_BUSY 0x01 - -/*immediate commands (word written into low 2 bytes of command reg) */ -#define IM_RESET_IMM_CMD 0x0400 -#define IM_FEATURE_CTR_IMM_CMD 0x040c -#define IM_DMA_PACING_IMM_CMD 0x040d -#define IM_ASSIGN_IMM_CMD 0x040e -#define IM_ABORT_IMM_CMD 0x040f -#define IM_FORMAT_PREP_IMM_CMD 0x0417 - -/*SCB (Subsystem Control Block) structure */ -struct im_scb { - unsigned short command; /*command word (read, etc.) */ - unsigned short enable; /*enable word, modifies cmd */ - union { - unsigned long log_blk_adr; /*block address on SCSI device */ - unsigned char scsi_cmd_length; /*6,10,12, for other scsi cmd */ - } u1; - unsigned long sys_buf_adr; /*physical system memory adr */ - unsigned long sys_buf_length; /*size of sys mem buffer */ - unsigned long tsb_adr; /*Termination Status Block adr */ - unsigned long scb_chain_adr; /*optional SCB chain address */ - union { - struct { - unsigned short count; /*block count, on SCSI device */ - unsigned short length; /*block length, on SCSI device */ - } blk; - unsigned char scsi_command[12]; /*other scsi command */ - } u2; -}; - -/*structure scatter-gather element (for list of system memory areas) */ -struct im_sge { - void *address; - unsigned long byte_length; -}; - -/*structure returned by a get_pos_info command: */ -struct im_pos_info { - unsigned short pos_id; /* adapter id */ - unsigned char pos_3a; /* pos 3 (if pos 6 = 0) */ - unsigned char pos_2; /* pos 2 */ - unsigned char int_level; /* interrupt level IRQ 11 or 14 */ - unsigned char pos_4a; /* pos 4 (if pos 6 = 0) */ - unsigned short connector_size; /* MCA connector size: 16 or 32 Bit */ - unsigned char num_luns; /* number of supported luns per device */ - unsigned char num_puns; /* number of supported puns */ - unsigned char pacing_factor; /* pacing factor */ - unsigned char num_ldns; /* number of ldns available */ - unsigned char eoi_off; /* time EOI and interrupt inactive */ - unsigned char max_busy; /* time between reset and busy on */ - unsigned short cache_stat; /* ldn cachestat. Bit=1 = not cached */ - unsigned short retry_stat; /* retry status of ldns. Bit=1=disabled */ - unsigned char pos_4b; /* pos 4 (if pos 6 = 1) */ - unsigned char pos_3b; /* pos 3 (if pos 6 = 1) */ - unsigned char pos_6; /* pos 6 */ - unsigned char pos_5; /* pos 5 */ - unsigned short max_overlap; /* maximum overlapping requests */ - unsigned short num_bus; /* number of SCSI-busses */ -}; - -/*values for SCB command word */ -#define IM_NO_SYNCHRONOUS 0x0040 /*flag for any command */ -#define IM_NO_DISCONNECT 0x0080 /*flag for any command */ -#define IM_READ_DATA_CMD 0x1c01 -#define IM_WRITE_DATA_CMD 0x1c02 -#define IM_READ_VERIFY_CMD 0x1c03 -#define IM_WRITE_VERIFY_CMD 0x1c04 -#define IM_REQUEST_SENSE_CMD 0x1c08 -#define IM_READ_CAPACITY_CMD 0x1c09 -#define IM_DEVICE_INQUIRY_CMD 0x1c0b -#define IM_READ_LOGICAL_CMD 0x1c2a -#define IM_OTHER_SCSI_CMD_CMD 0x241f - -/* unused, but supported, SCB commands */ -#define IM_GET_COMMAND_COMPLETE_STATUS_CMD 0x1c07 /* command status */ -#define IM_GET_POS_INFO_CMD 0x1c0a /* returns neat stuff */ -#define IM_READ_PREFETCH_CMD 0x1c31 /* caching controller only */ -#define IM_FOMAT_UNIT_CMD 0x1c16 /* format unit */ -#define IM_REASSIGN_BLOCK_CMD 0x1c18 /* in case of error */ - -/*values to set bits in the enable word of SCB */ -#define IM_READ_CONTROL 0x8000 -#define IM_REPORT_TSB_ONLY_ON_ERROR 0x4000 -#define IM_RETRY_ENABLE 0x2000 -#define IM_POINTER_TO_LIST 0x1000 -#define IM_SUPRESS_EXCEPTION_SHORT 0x0400 -#define IM_BYPASS_BUFFER 0x0200 -#define IM_CHAIN_ON_NO_ERROR 0x0001 - -/*TSB (Termination Status Block) structure */ -struct im_tsb { - unsigned short end_status; - unsigned short reserved1; - unsigned long residual_byte_count; - unsigned long sg_list_element_adr; - unsigned short status_length; - unsigned char dev_status; - unsigned char cmd_status; - unsigned char dev_error; - unsigned char cmd_error; - unsigned short reserved2; - unsigned short reserved3; - unsigned short low_of_last_scb_adr; - unsigned short high_of_last_scb_adr; -}; - -/*subsystem uses interrupt request level 14 */ -#define IM_IRQ 14 -/*SCSI-2 F/W may evade to interrupt 11 */ -#define IM_IRQ_FW 11 - -/* Model 95 has an additional alphanumeric display, which can be used - to display SCSI-activities. 8595 models do not have any disk led, which - makes this feature quite useful. - The regular PS/2 disk led is turned on/off by bits 6,7 of system - control port. */ - -/* LED display-port (actually, last LED on display) */ -#define MOD95_LED_PORT 0x108 -/* system-control-register of PS/2s with diskindicator */ -#define PS2_SYS_CTR 0x92 -/* activity displaying methods */ -#define LED_DISP 1 -#define LED_ADISP 2 -#define LED_ACTIVITY 4 -/* failed intr */ -#define CMD_FAIL 255 - -/* The SCSI-ID(!) of the accessed SCSI-device is shown on PS/2-95 machines' LED - displays. ldn is no longer displayed here, because the ldn mapping is now - done dynamically and the ldn <-> pun,lun maps can be looked-up at boottime - or during uptime in /proc/scsi/ibmmca/<host_no> in case of trouble, - interest, debugging or just for having fun. The left number gives the - host-adapter number and the right shows the accessed SCSI-ID. */ - -/* display_mode is set by the ibmmcascsi= command line arg */ -static int display_mode = 0; -/* set default adapter timeout */ -static unsigned int adapter_timeout = 45; -/* for probing on feature-command: */ -static unsigned int global_command_error_excuse = 0; -/* global setting by command line for adapter_speed */ -static int global_adapter_speed = 0; /* full speed by default */ - -/* Panel / LED on, do it right for F/W addressin, too. adisplay will - * just ignore ids>7, as the panel has only 7 digits available */ -#define PS2_DISK_LED_ON(ad,id) { if (display_mode & LED_DISP) { if (id>9) \ - outw((ad+48)|((id+55)<<8), MOD95_LED_PORT ); else \ - outw((ad+48)|((id+48)<<8), MOD95_LED_PORT ); } else \ - if (display_mode & LED_ADISP) { if (id<7) outb((char)(id+48),MOD95_LED_PORT+1+id); \ - outb((char)(ad+48), MOD95_LED_PORT); } \ - if ((display_mode & LED_ACTIVITY)||(!display_mode)) \ - outb(inb(PS2_SYS_CTR) | 0xc0, PS2_SYS_CTR); } - -/* Panel / LED off */ -/* bug fixed, Dec 15, 1997, where | was replaced by & here */ -#define PS2_DISK_LED_OFF() { if (display_mode & LED_DISP) \ - outw(0x2020, MOD95_LED_PORT ); else if (display_mode & LED_ADISP) { \ - outl(0x20202020,MOD95_LED_PORT); outl(0x20202020,MOD95_LED_PORT+4); } \ - if ((display_mode & LED_ACTIVITY)||(!display_mode)) \ - outb(inb(PS2_SYS_CTR) & 0x3f, PS2_SYS_CTR); } - -/* types of different supported hardware that goes to hostdata special */ -#define IBM_SCSI2_FW 0 -#define IBM_7568_WCACHE 1 -#define IBM_EXP_UNIT 2 -#define IBM_SCSI_WCACHE 3 -#define IBM_SCSI 4 -#define IBM_INTEGSCSI 5 - -/* other special flags for hostdata structure */ -#define FORCED_DETECTION 100 -#define INTEGRATED_SCSI 101 - -/* List of possible IBM-SCSI-adapters */ -static short ibmmca_id_table[] = { - 0x8efc, - 0x8efd, - 0x8ef8, - 0x8eff, - 0x8efe, - /* No entry for integrated SCSI, that's part of the register */ - 0 -}; - -static const char *ibmmca_description[] = { - "IBM SCSI-2 F/W Adapter", /* special = 0 */ - "IBM 7568 Industrial Computer SCSI Adapter w/Cache", /* special = 1 */ - "IBM Expansion Unit SCSI Controller", /* special = 2 */ - "IBM SCSI Adapter w/Cache", /* special = 3 */ - "IBM SCSI Adapter", /* special = 4 */ - "IBM Integrated SCSI Controller", /* special = 5 */ -}; - -/* Max number of logical devices (can be up from 0 to 14). 15 is the address -of the adapter itself. */ -#define MAX_LOG_DEV 15 - -/*local data for a logical device */ -struct logical_device { - struct im_scb scb; /* SCSI-subsystem-control-block structure */ - struct im_tsb tsb; /* SCSI command complete status block structure */ - struct im_sge sge[16]; /* scatter gather list structure */ - unsigned char buf[256]; /* SCSI command return data buffer */ - Scsi_Cmnd *cmd; /* SCSI-command that is currently in progress */ - int device_type; /* type of the SCSI-device. See include/scsi/scsi.h - for interpretation of the possible values */ - int block_length; /* blocksize of a particular logical SCSI-device */ - int cache_flag; /* 1 if this is uncached, 0 if cache is present for ldn */ - int retry_flag; /* 1 if adapter retry is disabled, 0 if enabled */ -}; - -/* statistics of the driver during operations (for proc_info) */ -struct Driver_Statistics { - /* SCSI statistics on the adapter */ - int ldn_access[MAX_LOG_DEV + 1]; /* total accesses on a ldn */ - int ldn_read_access[MAX_LOG_DEV + 1]; /* total read-access on a ldn */ - int ldn_write_access[MAX_LOG_DEV + 1]; /* total write-access on a ldn */ - int ldn_inquiry_access[MAX_LOG_DEV + 1]; /* total inquiries on a ldn */ - int ldn_modeselect_access[MAX_LOG_DEV + 1]; /* total mode selects on ldn */ - int scbs; /* short SCBs queued */ - int long_scbs; /* long SCBs queued */ - int total_accesses; /* total accesses on all ldns */ - int total_interrupts; /* total interrupts (should be - same as total_accesses) */ - int total_errors; /* command completed with error */ - /* dynamical assignment statistics */ - int total_scsi_devices; /* number of physical pun,lun */ - int dyn_flag; /* flag showing dynamical mode */ - int dynamical_assignments; /* number of remappings of ldns */ - int ldn_assignments[MAX_LOG_DEV + 1]; /* number of remappings of each - ldn */ -}; - -/* data structure for each host adapter */ -struct ibmmca_hostdata { - /* array of logical devices: */ - struct logical_device _ld[MAX_LOG_DEV + 1]; - /* array to convert (pun, lun) into logical device number: */ - unsigned char _get_ldn[16][8]; - /*array that contains the information about the physical SCSI-devices - attached to this host adapter: */ - unsigned char _get_scsi[16][8]; - /* used only when checking logical devices: */ - int _local_checking_phase_flag; - /* report received interrupt: */ - int _got_interrupt; - /* report termination-status of SCSI-command: */ - int _stat_result; - /* reset status (used only when doing reset): */ - int _reset_status; - /* code of the last SCSI command (needed for panic info): */ - int _last_scsi_command[MAX_LOG_DEV + 1]; - /* identifier of the last SCSI-command type */ - int _last_scsi_type[MAX_LOG_DEV + 1]; - /* last blockcount */ - int _last_scsi_blockcount[MAX_LOG_DEV + 1]; - /* last locgical block address */ - unsigned long _last_scsi_logical_block[MAX_LOG_DEV + 1]; - /* Counter that points on the next reassignable ldn for dynamical - remapping. The default value is 7, that is the first reassignable - number in the list at boottime: */ - int _next_ldn; - /* Statistics-structure for this IBM-SCSI-host: */ - struct Driver_Statistics _IBM_DS; - /* This hostadapters pos-registers pos2 until pos6 */ - unsigned int _pos[8]; - /* assign a special variable, that contains dedicated info about the - adaptertype */ - int _special; - /* connector size on the MCA bus */ - int _connector_size; - /* synchronous SCSI transfer rate bitpattern */ - int _adapter_speed; -}; - -/* macros to access host data structure */ -#define subsystem_pun(h) ((h)->this_id) -#define subsystem_maxid(h) ((h)->max_id) -#define ld(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_ld) -#define get_ldn(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_get_ldn) -#define get_scsi(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_get_scsi) -#define local_checking_phase_flag(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_local_checking_phase_flag) -#define got_interrupt(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_got_interrupt) -#define stat_result(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_stat_result) -#define reset_status(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_reset_status) -#define last_scsi_command(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_command) -#define last_scsi_type(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_type) -#define last_scsi_blockcount(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_blockcount) -#define last_scsi_logical_block(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_logical_block) -#define last_scsi_type(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_last_scsi_type) -#define next_ldn(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_next_ldn) -#define IBM_DS(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_IBM_DS) -#define special(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_special) -#define subsystem_connector_size(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_connector_size) -#define adapter_speed(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_adapter_speed) -#define pos2(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[2]) -#define pos3(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[3]) -#define pos4(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[4]) -#define pos5(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[5]) -#define pos6(h) (((struct ibmmca_hostdata *) (h)->hostdata)->_pos[6]) - -/* Define a arbitrary number as subsystem-marker-type. This number is, as - described in the ANSI-SCSI-standard, not occupied by other device-types. */ -#define TYPE_IBM_SCSI_ADAPTER 0x2F - -/* Define 0xFF for no device type, because this type is not defined within - the ANSI-SCSI-standard, therefore, it can be used and should not cause any - harm. */ -#define TYPE_NO_DEVICE 0xFF - -/* define medium-changer. If this is not defined previously, e.g. Linux - 2.0.x, define this type here. */ -#ifndef TYPE_MEDIUM_CHANGER -#define TYPE_MEDIUM_CHANGER 0x08 -#endif - -/* define possible operations for the immediate_assign command */ -#define SET_LDN 0 -#define REMOVE_LDN 1 - -/* ldn which is used to probe the SCSI devices */ -#define PROBE_LDN 0 - -/* reset status flag contents */ -#define IM_RESET_NOT_IN_PROGRESS 0 -#define IM_RESET_IN_PROGRESS 1 -#define IM_RESET_FINISHED_OK 2 -#define IM_RESET_FINISHED_FAIL 3 -#define IM_RESET_NOT_IN_PROGRESS_NO_INT 4 -#define IM_RESET_FINISHED_OK_NO_INT 5 - -/* define undefined SCSI-command */ -#define NO_SCSI 0xffff - -/*-----------------------------------------------------------------------*/ - -/* if this is nonzero, ibmmcascsi option has been passed to the kernel */ -static int io_port[IM_MAX_HOSTS] = { 0, 0, 0, 0, 0, 0, 0, 0 }; -static int scsi_id[IM_MAX_HOSTS] = { 7, 7, 7, 7, 7, 7, 7, 7 }; - -/* fill module-parameters only, when this define is present. - (that is kernel version 2.1.x) */ -#if defined(MODULE) -static char *boot_options = NULL; -module_param(boot_options, charp, 0); -module_param_array(io_port, int, NULL, 0); -module_param_array(scsi_id, int, NULL, 0); - -MODULE_LICENSE("GPL"); -#endif -/*counter of concurrent disk read/writes, to turn on/off disk led */ -static int disk_rw_in_progress = 0; - -static unsigned int pos[8]; /* whole pos register-line for diagnosis */ -/* Taking into account the additions, made by ZP Gu. - * This selects now the preset value from the configfile and - * offers the 'normal' commandline option to be accepted */ -#ifdef CONFIG_IBMMCA_SCSI_ORDER_STANDARD -static char ibm_ansi_order = 1; -#else -static char ibm_ansi_order = 0; -#endif - -static void issue_cmd(struct Scsi_Host *, unsigned long, unsigned char); -static void internal_done(Scsi_Cmnd * cmd); -static void check_devices(struct Scsi_Host *, int); -static int immediate_assign(struct Scsi_Host *, unsigned int, unsigned int, unsigned int, unsigned int); -static int immediate_feature(struct Scsi_Host *, unsigned int, unsigned int); -#ifdef CONFIG_IBMMCA_SCSI_DEV_RESET -static int immediate_reset(struct Scsi_Host *, unsigned int); -#endif -static int device_inquiry(struct Scsi_Host *, int); -static int read_capacity(struct Scsi_Host *, int); -static int get_pos_info(struct Scsi_Host *); -static char *ti_p(int); -static char *ti_l(int); -static char *ibmrate(unsigned int, int); -static int probe_display(int); -static int probe_bus_mode(struct Scsi_Host *); -static int device_exists(struct Scsi_Host *, int, int *, int *); -static int option_setup(char *); -/* local functions needed for proc_info */ -static int ldn_access_load(struct Scsi_Host *, int); -static int ldn_access_total_read_write(struct Scsi_Host *); - -static irqreturn_t interrupt_handler(int irq, void *dev_id) -{ - unsigned int intr_reg; - unsigned int cmd_result; - unsigned int ldn; - unsigned long flags; - Scsi_Cmnd *cmd; - int lastSCSI; - struct device *dev = dev_id; - struct Scsi_Host *shpnt = dev_get_drvdata(dev); - - spin_lock_irqsave(shpnt->host_lock, flags); - - if(!(inb(IM_STAT_REG(shpnt)) & IM_INTR_REQUEST)) { - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_NONE; - } - - /* the reset-function already did all the job, even ints got - renabled on the subsystem, so just return */ - if ((reset_status(shpnt) == IM_RESET_NOT_IN_PROGRESS_NO_INT) || (reset_status(shpnt) == IM_RESET_FINISHED_OK_NO_INT)) { - reset_status(shpnt) = IM_RESET_NOT_IN_PROGRESS; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - - /*must wait for attention reg not busy, then send EOI to subsystem */ - while (1) { - if (!(inb(IM_STAT_REG(shpnt)) & IM_BUSY)) - break; - cpu_relax(); - } - - /*get command result and logical device */ - intr_reg = (unsigned char) (inb(IM_INTR_REG(shpnt))); - cmd_result = intr_reg & 0xf0; - ldn = intr_reg & 0x0f; - /* get the last_scsi_command here */ - lastSCSI = last_scsi_command(shpnt)[ldn]; - outb(IM_EOI | ldn, IM_ATTN_REG(shpnt)); - - /*these should never happen (hw fails, or a local programming bug) */ - if (!global_command_error_excuse) { - switch (cmd_result) { - /* Prevent from Ooopsing on error to show the real reason */ - case IM_ADAPTER_HW_FAILURE: - case IM_SOFTWARE_SEQUENCING_ERROR: - case IM_CMD_ERROR: - printk(KERN_ERR "IBM MCA SCSI: Fatal Subsystem ERROR!\n"); - printk(KERN_ERR " Last cmd=0x%x, ena=%x, len=", lastSCSI, ld(shpnt)[ldn].scb.enable); - if (ld(shpnt)[ldn].cmd) - printk("%ld/%ld,", (long) (scsi_bufflen(ld(shpnt)[ldn].cmd)), (long) (ld(shpnt)[ldn].scb.sys_buf_length)); - else - printk("none,"); - if (ld(shpnt)[ldn].cmd) - printk("Blocksize=%d", ld(shpnt)[ldn].scb.u2.blk.length); - else - printk("Blocksize=none"); - printk(", host=%p, ldn=0x%x\n", shpnt, ldn); - if (ld(shpnt)[ldn].cmd) { - printk(KERN_ERR "Blockcount=%d/%d\n", last_scsi_blockcount(shpnt)[ldn], ld(shpnt)[ldn].scb.u2.blk.count); - printk(KERN_ERR "Logical block=%lx/%lx\n", last_scsi_logical_block(shpnt)[ldn], ld(shpnt)[ldn].scb.u1.log_blk_adr); - } - printk(KERN_ERR "Reason given: %s\n", (cmd_result == IM_ADAPTER_HW_FAILURE) ? "HARDWARE FAILURE" : (cmd_result == IM_SOFTWARE_SEQUENCING_ERROR) ? "SOFTWARE SEQUENCING ERROR" : (cmd_result == IM_CMD_ERROR) ? "COMMAND ERROR" : "UNKNOWN"); - /* if errors appear, enter this section to give detailed info */ - printk(KERN_ERR "IBM MCA SCSI: Subsystem Error-Status follows:\n"); - printk(KERN_ERR " Command Type................: %x\n", last_scsi_type(shpnt)[ldn]); - printk(KERN_ERR " Attention Register..........: %x\n", inb(IM_ATTN_REG(shpnt))); - printk(KERN_ERR " Basic Control Register......: %x\n", inb(IM_CTR_REG(shpnt))); - printk(KERN_ERR " Interrupt Status Register...: %x\n", intr_reg); - printk(KERN_ERR " Basic Status Register.......: %x\n", inb(IM_STAT_REG(shpnt))); - if ((last_scsi_type(shpnt)[ldn] == IM_SCB) || (last_scsi_type(shpnt)[ldn] == IM_LONG_SCB)) { - printk(KERN_ERR " SCB-Command.................: %x\n", ld(shpnt)[ldn].scb.command); - printk(KERN_ERR " SCB-Enable..................: %x\n", ld(shpnt)[ldn].scb.enable); - printk(KERN_ERR " SCB-logical block address...: %lx\n", ld(shpnt)[ldn].scb.u1.log_blk_adr); - printk(KERN_ERR " SCB-system buffer address...: %lx\n", ld(shpnt)[ldn].scb.sys_buf_adr); - printk(KERN_ERR " SCB-system buffer length....: %lx\n", ld(shpnt)[ldn].scb.sys_buf_length); - printk(KERN_ERR " SCB-tsb address.............: %lx\n", ld(shpnt)[ldn].scb.tsb_adr); - printk(KERN_ERR " SCB-Chain address...........: %lx\n", ld(shpnt)[ldn].scb.scb_chain_adr); - printk(KERN_ERR " SCB-block count.............: %x\n", ld(shpnt)[ldn].scb.u2.blk.count); - printk(KERN_ERR " SCB-block length............: %x\n", ld(shpnt)[ldn].scb.u2.blk.length); - } - printk(KERN_ERR " Send this report to the maintainer.\n"); - panic("IBM MCA SCSI: Fatal error message from the subsystem (0x%X,0x%X)!\n", lastSCSI, cmd_result); - break; - } - } else { - /* The command error handling is made silent, but we tell the - * calling function, that there is a reported error from the - * adapter. */ - switch (cmd_result) { - case IM_ADAPTER_HW_FAILURE: - case IM_SOFTWARE_SEQUENCING_ERROR: - case IM_CMD_ERROR: - global_command_error_excuse = CMD_FAIL; - break; - default: - global_command_error_excuse = 0; - break; - } - } - /* if no panic appeared, increase the interrupt-counter */ - IBM_DS(shpnt).total_interrupts++; - /*only for local checking phase */ - if (local_checking_phase_flag(shpnt)) { - stat_result(shpnt) = cmd_result; - got_interrupt(shpnt) = 1; - reset_status(shpnt) = IM_RESET_FINISHED_OK; - last_scsi_command(shpnt)[ldn] = NO_SCSI; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - /* handling of commands coming from upper level of scsi driver */ - if (last_scsi_type(shpnt)[ldn] == IM_IMM_CMD) { - /* verify ldn, and may handle rare reset immediate command */ - if ((reset_status(shpnt) == IM_RESET_IN_PROGRESS) && (last_scsi_command(shpnt)[ldn] == IM_RESET_IMM_CMD)) { - if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) { - disk_rw_in_progress = 0; - PS2_DISK_LED_OFF(); - reset_status(shpnt) = IM_RESET_FINISHED_FAIL; - } else { - /*reset disk led counter, turn off disk led */ - disk_rw_in_progress = 0; - PS2_DISK_LED_OFF(); - reset_status(shpnt) = IM_RESET_FINISHED_OK; - } - stat_result(shpnt) = cmd_result; - last_scsi_command(shpnt)[ldn] = NO_SCSI; - last_scsi_type(shpnt)[ldn] = 0; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } else if (last_scsi_command(shpnt)[ldn] == IM_ABORT_IMM_CMD) { - /* react on SCSI abort command */ -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Interrupt from SCSI-abort.\n"); -#endif - disk_rw_in_progress = 0; - PS2_DISK_LED_OFF(); - cmd = ld(shpnt)[ldn].cmd; - ld(shpnt)[ldn].cmd = NULL; - if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) - cmd->result = DID_NO_CONNECT << 16; - else - cmd->result = DID_ABORT << 16; - stat_result(shpnt) = cmd_result; - last_scsi_command(shpnt)[ldn] = NO_SCSI; - last_scsi_type(shpnt)[ldn] = 0; - if (cmd->scsi_done) - (cmd->scsi_done) (cmd); /* should be the internal_done */ - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } else { - disk_rw_in_progress = 0; - PS2_DISK_LED_OFF(); - reset_status(shpnt) = IM_RESET_FINISHED_OK; - stat_result(shpnt) = cmd_result; - last_scsi_command(shpnt)[ldn] = NO_SCSI; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - } - last_scsi_command(shpnt)[ldn] = NO_SCSI; - last_scsi_type(shpnt)[ldn] = 0; - cmd = ld(shpnt)[ldn].cmd; - ld(shpnt)[ldn].cmd = NULL; -#ifdef IM_DEBUG_TIMEOUT - if (cmd) { - if ((cmd->target == TIMEOUT_PUN) && (cmd->device->lun == TIMEOUT_LUN)) { - spin_unlock_irqsave(shpnt->host_lock, flags); - printk("IBM MCA SCSI: Ignoring interrupt from pun=%x, lun=%x.\n", cmd->target, cmd->device->lun); - return IRQ_HANDLED; - } - } -#endif - /*if no command structure, just return, else clear cmd */ - if (!cmd) - { - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; - } - -#ifdef IM_DEBUG_INT - printk("cmd=%02x ireg=%02x ds=%02x cs=%02x de=%02x ce=%02x\n", cmd->cmnd[0], intr_reg, ld(shpnt)[ldn].tsb.dev_status, ld(shpnt)[ldn].tsb.cmd_status, ld(shpnt)[ldn].tsb.dev_error, ld(shpnt)[ldn].tsb.cmd_error); -#endif - /*if this is end of media read/write, may turn off PS/2 disk led */ - if ((ld(shpnt)[ldn].device_type != TYPE_NO_LUN) && (ld(shpnt)[ldn].device_type != TYPE_NO_DEVICE)) { - /* only access this, if there was a valid device addressed */ - if (--disk_rw_in_progress == 0) - PS2_DISK_LED_OFF(); - } - - /* IBM describes the status-mask to be 0x1e, but this is not conform - * with SCSI-definition, I suppose, the reason for it is that IBM - * adapters do not support CMD_TERMINATED, TASK_SET_FULL and - * ACA_ACTIVE as returning statusbyte information. (ML) */ - if (cmd_result == IM_CMD_COMPLETED_WITH_FAILURE) { - cmd->result = (unsigned char) (ld(shpnt)[ldn].tsb.dev_status & 0x1e); - IBM_DS(shpnt).total_errors++; - } else - cmd->result = 0; - /* write device status into cmd->result, and call done function */ - if (lastSCSI == NO_SCSI) { /* unexpected interrupt :-( */ - cmd->result |= DID_BAD_INTR << 16; - printk("IBM MCA SCSI: WARNING - Interrupt from non-pending SCSI-command!\n"); - } else /* things went right :-) */ - cmd->result |= DID_OK << 16; - if (cmd->scsi_done) - (cmd->scsi_done) (cmd); - spin_unlock_irqrestore(shpnt->host_lock, flags); - return IRQ_HANDLED; -} - -static void issue_cmd(struct Scsi_Host *shpnt, unsigned long cmd_reg, - unsigned char attn_reg) -{ - unsigned long flags; - /* must wait for attention reg not busy */ - while (1) { - spin_lock_irqsave(shpnt->host_lock, flags); - if (!(inb(IM_STAT_REG(shpnt)) & IM_BUSY)) - break; - spin_unlock_irqrestore(shpnt->host_lock, flags); - } - /* write registers and enable system interrupts */ - outl(cmd_reg, IM_CMD_REG(shpnt)); - outb(attn_reg, IM_ATTN_REG(shpnt)); - spin_unlock_irqrestore(shpnt->host_lock, flags); -} - -static void internal_done(Scsi_Cmnd * cmd) -{ - cmd->SCp.Status++; - return; -} - -/* SCSI-SCB-command for device_inquiry */ -static int device_inquiry(struct Scsi_Host *shpnt, int ldn) -{ - int retr; - struct im_scb *scb; - struct im_tsb *tsb; - unsigned char *buf; - - scb = &(ld(shpnt)[ldn].scb); - tsb = &(ld(shpnt)[ldn].tsb); - buf = (unsigned char *) (&(ld(shpnt)[ldn].buf)); - ld(shpnt)[ldn].tsb.dev_status = 0; /* prepare statusblock */ - for (retr = 0; retr < 3; retr++) { - /* fill scb with inquiry command */ - scb->command = IM_DEVICE_INQUIRY_CMD | IM_NO_DISCONNECT; - scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_RETRY_ENABLE | IM_BYPASS_BUFFER; - last_scsi_command(shpnt)[ldn] = IM_DEVICE_INQUIRY_CMD; - last_scsi_type(shpnt)[ldn] = IM_SCB; - scb->sys_buf_adr = isa_virt_to_bus(buf); - scb->sys_buf_length = 255; /* maximum bufferlength gives max info */ - scb->tsb_adr = isa_virt_to_bus(tsb); - /* issue scb to passed ldn, and busy wait for interrupt */ - got_interrupt(shpnt) = 0; - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_SCB | ldn); - while (!got_interrupt(shpnt)) - barrier(); - - /*if command successful, break */ - if ((stat_result(shpnt) == IM_SCB_CMD_COMPLETED) || (stat_result(shpnt) == IM_SCB_CMD_COMPLETED_WITH_RETRIES)) - return 1; - } - /*if all three retries failed, return "no device at this ldn" */ - if (retr >= 3) - return 0; - else - return 1; -} - -static int read_capacity(struct Scsi_Host *shpnt, int ldn) -{ - int retr; - struct im_scb *scb; - struct im_tsb *tsb; - unsigned char *buf; - - scb = &(ld(shpnt)[ldn].scb); - tsb = &(ld(shpnt)[ldn].tsb); - buf = (unsigned char *) (&(ld(shpnt)[ldn].buf)); - ld(shpnt)[ldn].tsb.dev_status = 0; - for (retr = 0; retr < 3; retr++) { - /*fill scb with read capacity command */ - scb->command = IM_READ_CAPACITY_CMD; - scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_READ_CONTROL | IM_RETRY_ENABLE | IM_BYPASS_BUFFER; - last_scsi_command(shpnt)[ldn] = IM_READ_CAPACITY_CMD; - last_scsi_type(shpnt)[ldn] = IM_SCB; - scb->sys_buf_adr = isa_virt_to_bus(buf); - scb->sys_buf_length = 8; - scb->tsb_adr = isa_virt_to_bus(tsb); - /*issue scb to passed ldn, and busy wait for interrupt */ - got_interrupt(shpnt) = 0; - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_SCB | ldn); - while (!got_interrupt(shpnt)) - barrier(); - - /*if got capacity, get block length and return one device found */ - if ((stat_result(shpnt) == IM_SCB_CMD_COMPLETED) || (stat_result(shpnt) == IM_SCB_CMD_COMPLETED_WITH_RETRIES)) - return 1; - } - /*if all three retries failed, return "no device at this ldn" */ - if (retr >= 3) - return 0; - else - return 1; -} - -static int get_pos_info(struct Scsi_Host *shpnt) -{ - int retr; - struct im_scb *scb; - struct im_tsb *tsb; - unsigned char *buf; - - scb = &(ld(shpnt)[MAX_LOG_DEV].scb); - tsb = &(ld(shpnt)[MAX_LOG_DEV].tsb); - buf = (unsigned char *) (&(ld(shpnt)[MAX_LOG_DEV].buf)); - ld(shpnt)[MAX_LOG_DEV].tsb.dev_status = 0; - for (retr = 0; retr < 3; retr++) { - /*fill scb with get_pos_info command */ - scb->command = IM_GET_POS_INFO_CMD; - scb->enable = IM_READ_CONTROL | IM_REPORT_TSB_ONLY_ON_ERROR | IM_RETRY_ENABLE | IM_BYPASS_BUFFER; - last_scsi_command(shpnt)[MAX_LOG_DEV] = IM_GET_POS_INFO_CMD; - last_scsi_type(shpnt)[MAX_LOG_DEV] = IM_SCB; - scb->sys_buf_adr = isa_virt_to_bus(buf); - if (special(shpnt) == IBM_SCSI2_FW) - scb->sys_buf_length = 256; /* get all info from F/W adapter */ - else - scb->sys_buf_length = 18; /* get exactly 18 bytes for other SCSI */ - scb->tsb_adr = isa_virt_to_bus(tsb); - /*issue scb to ldn=15, and busy wait for interrupt */ - got_interrupt(shpnt) = 0; - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_SCB | MAX_LOG_DEV); - - /* FIXME: timeout */ - while (!got_interrupt(shpnt)) - barrier(); - - /*if got POS-stuff, get block length and return one device found */ - if ((stat_result(shpnt) == IM_SCB_CMD_COMPLETED) || (stat_result(shpnt) == IM_SCB_CMD_COMPLETED_WITH_RETRIES)) - return 1; - } - /* if all three retries failed, return "no device at this ldn" */ - if (retr >= 3) - return 0; - else - return 1; -} - -/* SCSI-immediate-command for assign. This functions maps/unmaps specific - ldn-numbers on SCSI (PUN,LUN). It is needed for presetting of the - subsystem and for dynamical remapping od ldns. */ -static int immediate_assign(struct Scsi_Host *shpnt, unsigned int pun, - unsigned int lun, unsigned int ldn, - unsigned int operation) -{ - int retr; - unsigned long imm_cmd; - - for (retr = 0; retr < 3; retr++) { - /* select mutation level of the SCSI-adapter */ - switch (special(shpnt)) { - case IBM_SCSI2_FW: - imm_cmd = (unsigned long) (IM_ASSIGN_IMM_CMD); - imm_cmd |= (unsigned long) ((lun & 7) << 24); - imm_cmd |= (unsigned long) ((operation & 1) << 23); - imm_cmd |= (unsigned long) ((pun & 7) << 20) | ((pun & 8) << 24); - imm_cmd |= (unsigned long) ((ldn & 15) << 16); - break; - default: - imm_cmd = inl(IM_CMD_REG(shpnt)); - imm_cmd &= (unsigned long) (0xF8000000); /* keep reserved bits */ - imm_cmd |= (unsigned long) (IM_ASSIGN_IMM_CMD); - imm_cmd |= (unsigned long) ((lun & 7) << 24); - imm_cmd |= (unsigned long) ((operation & 1) << 23); - imm_cmd |= (unsigned long) ((pun & 7) << 20); - imm_cmd |= (unsigned long) ((ldn & 15) << 16); - break; - } - last_scsi_command(shpnt)[MAX_LOG_DEV] = IM_ASSIGN_IMM_CMD; - last_scsi_type(shpnt)[MAX_LOG_DEV] = IM_IMM_CMD; - got_interrupt(shpnt) = 0; - issue_cmd(shpnt, (unsigned long) (imm_cmd), IM_IMM_CMD | MAX_LOG_DEV); - while (!got_interrupt(shpnt)) - barrier(); - - /*if command successful, break */ - if (stat_result(shpnt) == IM_IMMEDIATE_CMD_COMPLETED) - return 1; - } - if (retr >= 3) - return 0; - else - return 1; -} - -static int immediate_feature(struct Scsi_Host *shpnt, unsigned int speed, unsigned int timeout) -{ - int retr; - unsigned long imm_cmd; - - for (retr = 0; retr < 3; retr++) { - /* select mutation level of the SCSI-adapter */ - imm_cmd = IM_FEATURE_CTR_IMM_CMD; - imm_cmd |= (unsigned long) ((speed & 0x7) << 29); - imm_cmd |= (unsigned long) ((timeout & 0x1fff) << 16); - last_scsi_command(shpnt)[MAX_LOG_DEV] = IM_FEATURE_CTR_IMM_CMD; - last_scsi_type(shpnt)[MAX_LOG_DEV] = IM_IMM_CMD; - got_interrupt(shpnt) = 0; - /* we need to run into command errors in order to probe for the - * right speed! */ - global_command_error_excuse = 1; - issue_cmd(shpnt, (unsigned long) (imm_cmd), IM_IMM_CMD | MAX_LOG_DEV); - - /* FIXME: timeout */ - while (!got_interrupt(shpnt)) - barrier(); - if (global_command_error_excuse == CMD_FAIL) { - global_command_error_excuse = 0; - return 2; - } else - global_command_error_excuse = 0; - /*if command successful, break */ - if (stat_result(shpnt) == IM_IMMEDIATE_CMD_COMPLETED) - return 1; - } - if (retr >= 3) - return 0; - else - return 1; -} - -#ifdef CONFIG_IBMMCA_SCSI_DEV_RESET -static int immediate_reset(struct Scsi_Host *shpnt, unsigned int ldn) -{ - int retries; - int ticks; - unsigned long imm_command; - - for (retries = 0; retries < 3; retries++) { - imm_command = inl(IM_CMD_REG(shpnt)); - imm_command &= (unsigned long) (0xFFFF0000); /* keep reserved bits */ - imm_command |= (unsigned long) (IM_RESET_IMM_CMD); - last_scsi_command(shpnt)[ldn] = IM_RESET_IMM_CMD; - last_scsi_type(shpnt)[ldn] = IM_IMM_CMD; - got_interrupt(shpnt) = 0; - reset_status(shpnt) = IM_RESET_IN_PROGRESS; - issue_cmd(shpnt, (unsigned long) (imm_command), IM_IMM_CMD | ldn); - ticks = IM_RESET_DELAY * HZ; - while (reset_status(shpnt) == IM_RESET_IN_PROGRESS && --ticks) { - udelay((1 + 999 / HZ) * 1000); - barrier(); - } - /* if reset did not complete, just complain */ - if (!ticks) { - printk(KERN_ERR "IBM MCA SCSI: reset did not complete within %d seconds.\n", IM_RESET_DELAY); - reset_status(shpnt) = IM_RESET_FINISHED_OK; - /* did not work, finish */ - return 1; - } - /*if command successful, break */ - if (stat_result(shpnt) == IM_IMMEDIATE_CMD_COMPLETED) - return 1; - } - if (retries >= 3) - return 0; - else - return 1; -} -#endif - -/* type-interpreter for physical device numbers */ -static char *ti_p(int dev) -{ - switch (dev) { - case TYPE_IBM_SCSI_ADAPTER: - return ("A"); - case TYPE_DISK: - return ("D"); - case TYPE_TAPE: - return ("T"); - case TYPE_PROCESSOR: - return ("P"); - case TYPE_WORM: - return ("W"); - case TYPE_ROM: - return ("R"); - case TYPE_SCANNER: - return ("S"); - case TYPE_MOD: - return ("M"); - case TYPE_MEDIUM_CHANGER: - return ("C"); - case TYPE_NO_LUN: - return ("+"); /* show NO_LUN */ - } - return ("-"); /* TYPE_NO_DEVICE and others */ -} - -/* interpreter for logical device numbers (ldn) */ -static char *ti_l(int val) -{ - const char hex[16] = "0123456789abcdef"; - static char answer[2]; - - answer[1] = (char) (0x0); - if (val <= MAX_LOG_DEV) - answer[0] = hex[val]; - else - answer[0] = '-'; - return (char *) &answer; -} - -/* transfers bitpattern of the feature command to values in MHz */ -static char *ibmrate(unsigned int speed, int i) -{ - switch (speed) { - case 0: - return i ? "5.00" : "10.00"; - case 1: - return i ? "4.00" : "8.00"; - case 2: - return i ? "3.33" : "6.66"; - case 3: - return i ? "2.86" : "5.00"; - case 4: - return i ? "2.50" : "4.00"; - case 5: - return i ? "2.22" : "3.10"; - case 6: - return i ? "2.00" : "2.50"; - case 7: - return i ? "1.82" : "2.00"; - } - return "---"; -} - -static int probe_display(int what) -{ - static int rotator = 0; - const char rotor[] = "|/-\\"; - - if (!(display_mode & LED_DISP)) - return 0; - if (!what) { - outl(0x20202020, MOD95_LED_PORT); - outl(0x20202020, MOD95_LED_PORT + 4); - } else { - outb('S', MOD95_LED_PORT + 7); - outb('C', MOD95_LED_PORT + 6); - outb('S', MOD95_LED_PORT + 5); - outb('I', MOD95_LED_PORT + 4); - outb('i', MOD95_LED_PORT + 3); - outb('n', MOD95_LED_PORT + 2); - outb('i', MOD95_LED_PORT + 1); - outb((char) (rotor[rotator]), MOD95_LED_PORT); - rotator++; - if (rotator > 3) - rotator = 0; - } - return 0; -} - -static int probe_bus_mode(struct Scsi_Host *shpnt) -{ - struct im_pos_info *info; - int num_bus = 0; - int ldn; - - info = (struct im_pos_info *) (&(ld(shpnt)[MAX_LOG_DEV].buf)); - if (get_pos_info(shpnt)) { - if (info->connector_size & 0xf000) - subsystem_connector_size(shpnt) = 16; - else - subsystem_connector_size(shpnt) = 32; - num_bus |= (info->pos_4b & 8) >> 3; - for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) { - if ((special(shpnt) == IBM_SCSI_WCACHE) || (special(shpnt) == IBM_7568_WCACHE)) { - if (!((info->cache_stat >> ldn) & 1)) - ld(shpnt)[ldn].cache_flag = 0; - } - if (!((info->retry_stat >> ldn) & 1)) - ld(shpnt)[ldn].retry_flag = 0; - } -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: SCSI-Cache bits: "); - for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) { - printk("%d", ld(shpnt)[ldn].cache_flag); - } - printk("\nIBM MCA SCSI: SCSI-Retry bits: "); - for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) { - printk("%d", ld(shpnt)[ldn].retry_flag); - } - printk("\n"); -#endif - } - return num_bus; -} - -/* probing scsi devices */ -static void check_devices(struct Scsi_Host *shpnt, int adaptertype) -{ - int id, lun, ldn, ticks; - int count_devices; /* local counter for connected device */ - int max_pun; - int num_bus; - int speedrun; /* local adapter_speed check variable */ - - /* assign default values to certain variables */ - ticks = 0; - count_devices = 0; - IBM_DS(shpnt).dyn_flag = 0; /* normally no need for dynamical ldn management */ - IBM_DS(shpnt).total_errors = 0; /* set errorcounter to 0 */ - next_ldn(shpnt) = 7; /* next ldn to be assigned is 7, because 0-6 is 'hardwired' */ - - /* initialize the very important driver-informational arrays/structs */ - memset(ld(shpnt), 0, sizeof(ld(shpnt))); - for (ldn = 0; ldn <= MAX_LOG_DEV; ldn++) { - last_scsi_command(shpnt)[ldn] = NO_SCSI; /* emptify last SCSI-command storage */ - last_scsi_type(shpnt)[ldn] = 0; - ld(shpnt)[ldn].cache_flag = 1; - ld(shpnt)[ldn].retry_flag = 1; - } - memset(get_ldn(shpnt), TYPE_NO_DEVICE, sizeof(get_ldn(shpnt))); /* this is essential ! */ - memset(get_scsi(shpnt), TYPE_NO_DEVICE, sizeof(get_scsi(shpnt))); /* this is essential ! */ - for (lun = 0; lun < 8; lun++) { - /* mark the adapter at its pun on all luns */ - get_scsi(shpnt)[subsystem_pun(shpnt)][lun] = TYPE_IBM_SCSI_ADAPTER; - get_ldn(shpnt)[subsystem_pun(shpnt)][lun] = MAX_LOG_DEV; /* make sure, the subsystem - ldn is active for all - luns. */ - } - probe_display(0); /* Supercool display usage during SCSI-probing. */ - /* This makes sense, when booting without any */ - /* monitor connected on model XX95. */ - - /* STEP 1: */ - adapter_speed(shpnt) = global_adapter_speed; - speedrun = adapter_speed(shpnt); - while (immediate_feature(shpnt, speedrun, adapter_timeout) == 2) { - probe_display(1); - if (speedrun == 7) - panic("IBM MCA SCSI: Cannot set Synchronous-Transfer-Rate!\n"); - speedrun++; - if (speedrun > 7) - speedrun = 7; - } - adapter_speed(shpnt) = speedrun; - /* Get detailed information about the current adapter, necessary for - * device operations: */ - num_bus = probe_bus_mode(shpnt); - - /* num_bus contains only valid data for the F/W adapter! */ - if (adaptertype == IBM_SCSI2_FW) { /* F/W SCSI adapter: */ - /* F/W adapter PUN-space extension evaluation: */ - if (num_bus) { - printk(KERN_INFO "IBM MCA SCSI: Separate bus mode (wide-addressing enabled)\n"); - subsystem_maxid(shpnt) = 16; - } else { - printk(KERN_INFO "IBM MCA SCSI: Combined bus mode (wide-addressing disabled)\n"); - subsystem_maxid(shpnt) = 8; - } - printk(KERN_INFO "IBM MCA SCSI: Sync.-Rate (F/W: 20, Int.: 10, Ext.: %s) MBytes/s\n", ibmrate(speedrun, adaptertype)); - } else /* all other IBM SCSI adapters: */ - printk(KERN_INFO "IBM MCA SCSI: Synchronous-SCSI-Transfer-Rate: %s MBytes/s\n", ibmrate(speedrun, adaptertype)); - - /* assign correct PUN device space */ - max_pun = subsystem_maxid(shpnt); - -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Current SCSI-host index: %d\n", shpnt); - printk("IBM MCA SCSI: Removing default logical SCSI-device mapping."); -#else - printk(KERN_INFO "IBM MCA SCSI: Dev. Order: %s, Mapping (takes <2min): ", (ibm_ansi_order) ? "ANSI" : "New"); -#endif - for (ldn = 0; ldn < MAX_LOG_DEV; ldn++) { - probe_display(1); -#ifdef IM_DEBUG_PROBE - printk("."); -#endif - immediate_assign(shpnt, 0, 0, ldn, REMOVE_LDN); /* remove ldn (wherever) */ - } - lun = 0; /* default lun is 0 */ -#ifndef IM_DEBUG_PROBE - printk("cleared,"); -#endif - /* STEP 2: */ -#ifdef IM_DEBUG_PROBE - printk("\nIBM MCA SCSI: Scanning SCSI-devices."); -#endif - for (id = 0; id < max_pun; id++) -#ifdef CONFIG_SCSI_MULTI_LUN - for (lun = 0; lun < 8; lun++) -#endif - { - probe_display(1); -#ifdef IM_DEBUG_PROBE - printk("."); -#endif - if (id != subsystem_pun(shpnt)) { - /* if pun is not the adapter: */ - /* set ldn=0 to pun,lun */ - immediate_assign(shpnt, id, lun, PROBE_LDN, SET_LDN); - if (device_inquiry(shpnt, PROBE_LDN)) { /* probe device */ - get_scsi(shpnt)[id][lun] = (unsigned char) (ld(shpnt)[PROBE_LDN].buf[0]); - /* entry, even for NO_LUN */ - if (ld(shpnt)[PROBE_LDN].buf[0] != TYPE_NO_LUN) - count_devices++; /* a existing device is found */ - } - /* remove ldn */ - immediate_assign(shpnt, id, lun, PROBE_LDN, REMOVE_LDN); - } - } -#ifndef IM_DEBUG_PROBE - printk("scanned,"); -#endif - /* STEP 3: */ -#ifdef IM_DEBUG_PROBE - printk("\nIBM MCA SCSI: Mapping SCSI-devices."); -#endif - ldn = 0; - lun = 0; -#ifdef CONFIG_SCSI_MULTI_LUN - for (lun = 0; lun < 8 && ldn < MAX_LOG_DEV; lun++) -#endif - for (id = 0; id < max_pun && ldn < MAX_LOG_DEV; id++) { - probe_display(1); -#ifdef IM_DEBUG_PROBE - printk("."); -#endif - if (id != subsystem_pun(shpnt)) { - if (get_scsi(shpnt)[id][lun] != TYPE_NO_LUN && get_scsi(shpnt)[id][lun] != TYPE_NO_DEVICE) { - /* Only map if accepted type. Always enter for - lun == 0 to get no gaps into ldn-mapping for ldn<7. */ - immediate_assign(shpnt, id, lun, ldn, SET_LDN); - get_ldn(shpnt)[id][lun] = ldn; /* map ldn */ - if (device_exists(shpnt, ldn, &ld(shpnt)[ldn].block_length, &ld(shpnt)[ldn].device_type)) { -#ifdef CONFIG_IBMMCA_SCSI_DEV_RESET - printk("resetting device at ldn=%x ... ", ldn); - immediate_reset(shpnt, ldn); -#endif - ldn++; - } else { - /* device vanished, probably because we don't know how to - * handle it or because it has problems */ - if (lun > 0) { - /* remove mapping */ - get_ldn(shpnt)[id][lun] = TYPE_NO_DEVICE; - immediate_assign(shpnt, 0, 0, ldn, REMOVE_LDN); - } else - ldn++; - } - } else if (lun == 0) { - /* map lun == 0, even if no device exists */ - immediate_assign(shpnt, id, lun, ldn, SET_LDN); - get_ldn(shpnt)[id][lun] = ldn; /* map ldn */ - ldn++; - } - } - } - /* STEP 4: */ - - /* map remaining ldns to non-existing devices */ - for (lun = 1; lun < 8 && ldn < MAX_LOG_DEV; lun++) - for (id = 0; id < max_pun && ldn < MAX_LOG_DEV; id++) { - if (get_scsi(shpnt)[id][lun] == TYPE_NO_LUN || get_scsi(shpnt)[id][lun] == TYPE_NO_DEVICE) { - probe_display(1); - /* Map remaining ldns only to NON-existing pun,lun - combinations to make sure an inquiry will fail. - For MULTI_LUN, it is needed to avoid adapter autonome - SCSI-remapping. */ - immediate_assign(shpnt, id, lun, ldn, SET_LDN); - get_ldn(shpnt)[id][lun] = ldn; - ldn++; - } - } -#ifndef IM_DEBUG_PROBE - printk("mapped."); -#endif - printk("\n"); -#ifdef IM_DEBUG_PROBE - if (ibm_ansi_order) - printk("IBM MCA SCSI: Device order: IBM/ANSI (pun=7 is first).\n"); - else - printk("IBM MCA SCSI: Device order: New Industry Standard (pun=0 is first).\n"); -#endif - -#ifdef IM_DEBUG_PROBE - /* Show the physical and logical mapping during boot. */ - printk("IBM MCA SCSI: Determined SCSI-device-mapping:\n"); - printk(" Physical SCSI-Device Map Logical SCSI-Device Map\n"); - printk("ID\\LUN 0 1 2 3 4 5 6 7 ID\\LUN 0 1 2 3 4 5 6 7\n"); - for (id = 0; id < max_pun; id++) { - printk("%2d ", id); - for (lun = 0; lun < 8; lun++) - printk("%2s ", ti_p(get_scsi(shpnt)[id][lun])); - printk(" %2d ", id); - for (lun = 0; lun < 8; lun++) - printk("%2s ", ti_l(get_ldn(shpnt)[id][lun])); - printk("\n"); - } -#endif - - /* assign total number of found SCSI-devices to the statistics struct */ - IBM_DS(shpnt).total_scsi_devices = count_devices; - - /* decide for output in /proc-filesystem, if the configuration of - SCSI-devices makes dynamical reassignment of devices necessary */ - if (count_devices >= MAX_LOG_DEV) - IBM_DS(shpnt).dyn_flag = 1; /* dynamical assignment is necessary */ - else - IBM_DS(shpnt).dyn_flag = 0; /* dynamical assignment is not necessary */ - - /* If no SCSI-devices are assigned, return 1 in order to cause message. */ - if (ldn == 0) - printk("IBM MCA SCSI: Warning: No SCSI-devices found/assigned!\n"); - - /* reset the counters for statistics on the current adapter */ - IBM_DS(shpnt).scbs = 0; - IBM_DS(shpnt).long_scbs = 0; - IBM_DS(shpnt).total_accesses = 0; - IBM_DS(shpnt).total_interrupts = 0; - IBM_DS(shpnt).dynamical_assignments = 0; - memset(IBM_DS(shpnt).ldn_access, 0x0, sizeof(IBM_DS(shpnt).ldn_access)); - memset(IBM_DS(shpnt).ldn_read_access, 0x0, sizeof(IBM_DS(shpnt).ldn_read_access)); - memset(IBM_DS(shpnt).ldn_write_access, 0x0, sizeof(IBM_DS(shpnt).ldn_write_access)); - memset(IBM_DS(shpnt).ldn_inquiry_access, 0x0, sizeof(IBM_DS(shpnt).ldn_inquiry_access)); - memset(IBM_DS(shpnt).ldn_modeselect_access, 0x0, sizeof(IBM_DS(shpnt).ldn_modeselect_access)); - memset(IBM_DS(shpnt).ldn_assignments, 0x0, sizeof(IBM_DS(shpnt).ldn_assignments)); - probe_display(0); - return; -} - -static int device_exists(struct Scsi_Host *shpnt, int ldn, int *block_length, int *device_type) -{ - unsigned char *buf; - /* if no valid device found, return immediately with 0 */ - if (!(device_inquiry(shpnt, ldn))) - return 0; - buf = (unsigned char *) (&(ld(shpnt)[ldn].buf)); - if (*buf == TYPE_ROM) { - *device_type = TYPE_ROM; - *block_length = 2048; /* (standard blocksize for yellow-/red-book) */ - return 1; - } - if (*buf == TYPE_WORM) { - *device_type = TYPE_WORM; - *block_length = 2048; - return 1; - } - if (*buf == TYPE_DISK) { - *device_type = TYPE_DISK; - if (read_capacity(shpnt, ldn)) { - *block_length = *(buf + 7) + (*(buf + 6) << 8) + (*(buf + 5) << 16) + (*(buf + 4) << 24); - return 1; - } else - return 0; - } - if (*buf == TYPE_MOD) { - *device_type = TYPE_MOD; - if (read_capacity(shpnt, ldn)) { - *block_length = *(buf + 7) + (*(buf + 6) << 8) + (*(buf + 5) << 16) + (*(buf + 4) << 24); - return 1; - } else - return 0; - } - if (*buf == TYPE_TAPE) { - *device_type = TYPE_TAPE; - *block_length = 0; /* not in use (setting by mt and mtst in op.) */ - return 1; - } - if (*buf == TYPE_PROCESSOR) { - *device_type = TYPE_PROCESSOR; - *block_length = 0; /* they set their stuff on drivers */ - return 1; - } - if (*buf == TYPE_SCANNER) { - *device_type = TYPE_SCANNER; - *block_length = 0; /* they set their stuff on drivers */ - return 1; - } - if (*buf == TYPE_MEDIUM_CHANGER) { - *device_type = TYPE_MEDIUM_CHANGER; - *block_length = 0; /* One never knows, what to expect on a medium - changer device. */ - return 1; - } - return 0; -} - -static void internal_ibmmca_scsi_setup(char *str, int *ints) -{ - int i, j, io_base, id_base; - char *token; - - io_base = 0; - id_base = 0; - if (str) { - j = 0; - while ((token = strsep(&str, ",")) != NULL) { - if (!strcmp(token, "activity")) - display_mode |= LED_ACTIVITY; - if (!strcmp(token, "display")) - display_mode |= LED_DISP; - if (!strcmp(token, "adisplay")) - display_mode |= LED_ADISP; - if (!strcmp(token, "normal")) - ibm_ansi_order = 0; - if (!strcmp(token, "ansi")) - ibm_ansi_order = 1; - if (!strcmp(token, "fast")) - global_adapter_speed = 0; - if (!strcmp(token, "medium")) - global_adapter_speed = 4; - if (!strcmp(token, "slow")) - global_adapter_speed = 7; - if ((*token == '-') || (isdigit(*token))) { - if (!(j % 2) && (io_base < IM_MAX_HOSTS)) - io_port[io_base++] = simple_strtoul(token, NULL, 0); - if ((j % 2) && (id_base < IM_MAX_HOSTS)) - scsi_id[id_base++] = simple_strtoul(token, NULL, 0); - j++; - } - } - } else if (ints) { - for (i = 0; i < IM_MAX_HOSTS && 2 * i + 2 < ints[0]; i++) { - io_port[i] = ints[2 * i + 2]; - scsi_id[i] = ints[2 * i + 2]; - } - } - return; -} - -#if 0 - FIXME NEED TO MOVE TO SYSFS - -static int ibmmca_getinfo(char *buf, int slot, void *dev_id) -{ - struct Scsi_Host *shpnt; - int len, speciale, connectore, k; - unsigned int pos[8]; - unsigned long flags; - struct Scsi_Host *dev = dev_id; - - spin_lock_irqsave(dev->host_lock, flags); - - shpnt = dev; /* assign host-structure to local pointer */ - len = 0; /* set filled text-buffer index to 0 */ - /* get the _special contents of the hostdata structure */ - speciale = ((struct ibmmca_hostdata *) shpnt->hostdata)->_special; - connectore = ((struct ibmmca_hostdata *) shpnt->hostdata)->_connector_size; - for (k = 2; k < 4; k++) - pos[k] = ((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k]; - if (speciale == FORCED_DETECTION) { /* forced detection */ - len += sprintf(buf + len, - "Adapter category: forced detected\n" "***************************************\n" "*** Forced detected SCSI Adapter ***\n" "*** No chip-information available ***\n" "***************************************\n"); - } else if (speciale == INTEGRATED_SCSI) { - /* if the integrated subsystem has been found automatically: */ - len += sprintf(buf + len, - "Adapter category: integrated\n" "Chip revision level: %d\n" "Chip status: %s\n" "8 kByte NVRAM status: %s\n", ((pos[2] & 0xf0) >> 4), (pos[2] & 1) ? "enabled" : "disabled", (pos[2] & 2) ? "locked" : "accessible"); - } else if ((speciale >= 0) && (speciale < ARRAY_SIZE(subsys_list))) { - /* if the subsystem is a slot adapter */ - len += sprintf(buf + len, "Adapter category: slot-card\n" "ROM Segment Address: "); - if ((pos[2] & 0xf0) == 0xf0) - len += sprintf(buf + len, "off\n"); - else - len += sprintf(buf + len, "0x%x\n", ((pos[2] & 0xf0) << 13) + 0xc0000); - len += sprintf(buf + len, "Chip status: %s\n", (pos[2] & 1) ? "enabled" : "disabled"); - len += sprintf(buf + len, "Adapter I/O Offset: 0x%x\n", ((pos[2] & 0x0e) << 2)); - } else { - len += sprintf(buf + len, "Adapter category: unknown\n"); - } - /* common subsystem information to write to the slotn file */ - len += sprintf(buf + len, "Subsystem PUN: %d\n", shpnt->this_id); - len += sprintf(buf + len, "I/O base address range: 0x%x-0x%x\n", (unsigned int) (shpnt->io_port), (unsigned int) (shpnt->io_port + 7)); - len += sprintf(buf + len, "MCA-slot size: %d bits", connectore); - /* Now make sure, the bufferlength is devidable by 4 to avoid - * paging problems of the buffer. */ - while (len % sizeof(int) != (sizeof(int) - 1)) - len += sprintf(buf + len, " "); - len += sprintf(buf + len, "\n"); - - spin_unlock_irqrestore(shpnt->host_lock, flags); - - return len; -} -#endif - -static struct scsi_host_template ibmmca_driver_template = { - .proc_name = "ibmmca", - .proc_info = ibmmca_proc_info, - .name = "IBM SCSI-Subsystem", - .queuecommand = ibmmca_queuecommand, - .eh_abort_handler = ibmmca_abort, - .eh_host_reset_handler = ibmmca_host_reset, - .bios_param = ibmmca_biosparam, - .can_queue = 16, - .this_id = 7, - .sg_tablesize = 16, - .cmd_per_lun = 1, - .use_clustering = ENABLE_CLUSTERING, -}; - -static int ibmmca_probe(struct device *dev) -{ - struct Scsi_Host *shpnt; - int port, id, i, j, k, irq, enabled, ret = -EINVAL; - struct mca_device *mca_dev = to_mca_device(dev); - const char *description = ibmmca_description[mca_dev->index]; - - /* First of all, print the version number of the driver. This is - * important to allow better user bugreports in case of already - * having problems with the MCA_bus probing. */ - printk(KERN_INFO "IBM MCA SCSI: Version %s\n", IBMMCA_SCSI_DRIVER_VERSION); - /* The POS2-register of all PS/2 model SCSI-subsystems has the following - * interpretation of bits: - * Bit 7 - 4 : Chip Revision ID (Release) - * Bit 3 - 2 : Reserved - * Bit 1 : 8k NVRAM Disabled - * Bit 0 : Chip Enable (EN-Signal) - * The POS3-register is interpreted as follows: - * Bit 7 - 5 : SCSI ID - * Bit 4 : Reserved = 0 - * Bit 3 - 0 : Reserved = 0 - * (taken from "IBM, PS/2 Hardware Interface Technical Reference, Common - * Interfaces (1991)"). - * In short words, this means, that IBM PS/2 machines only support - * 1 single subsystem by default. The slot-adapters must have another - * configuration on pos2. Here, one has to assume the following - * things for POS2-register: - * Bit 7 - 4 : Chip Revision ID (Release) - * Bit 3 - 1 : port offset factor - * Bit 0 : Chip Enable (EN-Signal) - * As I found a patch here, setting the IO-registers to 0x3540 forced, - * as there was a 0x05 in POS2 on a model 56, I assume, that the - * port 0x3540 must be fix for integrated SCSI-controllers. - * Ok, this discovery leads to the following implementation: (M.Lang) */ - - /* first look for the IBM SCSI integrated subsystem on the motherboard */ - for (j = 0; j < 8; j++) /* read the pos-information */ - pos[j] = mca_device_read_pos(mca_dev, j); - id = (pos[3] & 0xe0) >> 5; /* this is correct and represents the PUN */ - enabled = (pos[2] &0x01); - if (!enabled) { - printk(KERN_WARNING "IBM MCA SCSI: WARNING - Your SCSI-subsystem is disabled!\n"); - printk(KERN_WARNING " SCSI-operations may not work.\n"); - } - - /* pos2 = pos3 = 0xff if there is no integrated SCSI-subsystem present, but - * if we ignore the settings of all surrounding pos registers, it is not - * completely sufficient to only check pos2 and pos3. */ - /* Therefore, now the following if statement is used to - * make sure, we see a real integrated onboard SCSI-interface and no - * internal system information, which gets mapped to some pos registers - * on models 95xx. */ - if (mca_dev->slot == MCA_INTEGSCSI && - ((!pos[0] && !pos[1] && pos[2] > 0 && - pos[3] > 0 && !pos[4] && !pos[5] && - !pos[6] && !pos[7]) || - (pos[0] == 0xff && pos[1] == 0xff && - pos[2] < 0xff && pos[3] < 0xff && - pos[4] == 0xff && pos[5] == 0xff && - pos[6] == 0xff && pos[7] == 0xff))) { - irq = IM_IRQ; - port = IM_IO_PORT; - } else { - irq = IM_IRQ; - port = IM_IO_PORT + ((pos[2] &0x0e) << 2); - if ((mca_dev->index == IBM_SCSI2_FW) && (pos[6] != 0)) { - printk(KERN_ERR "IBM MCA SCSI: ERROR - Wrong POS(6)-register setting!\n"); - printk(KERN_ERR " Impossible to determine adapter PUN!\n"); - printk(KERN_ERR " Guessing adapter PUN = 7.\n"); - id = 7; - } else { - id = (pos[3] & 0xe0) >> 5; /* get subsystem PUN */ - if (mca_dev->index == IBM_SCSI2_FW) { - id |= (pos[3] & 0x10) >> 1; /* get subsystem PUN high-bit - * for F/W adapters */ - } - } - if ((mca_dev->index == IBM_SCSI2_FW) && - (pos[4] & 0x01) && (pos[6] == 0)) { - /* IRQ11 is used by SCSI-2 F/W Adapter/A */ - printk(KERN_DEBUG "IBM MCA SCSI: SCSI-2 F/W adapter needs IRQ 11.\n"); - irq = IM_IRQ_FW; - } - } - - - - /* give detailed information on the subsystem. This helps me - * additionally during debugging and analyzing bug-reports. */ - printk(KERN_INFO "IBM MCA SCSI: %s found, io=0x%x, scsi id=%d,\n", - description, port, id); - if (mca_dev->slot == MCA_INTEGSCSI) - printk(KERN_INFO " chip rev.=%d, 8K NVRAM=%s, subsystem=%s\n", ((pos[2] & 0xf0) >> 4), (pos[2] & 2) ? "locked" : "accessible", (pos[2] & 1) ? "enabled." : "disabled."); - else { - if ((pos[2] & 0xf0) == 0xf0) - printk(KERN_DEBUG " ROM Addr.=off,"); - else - printk(KERN_DEBUG " ROM Addr.=0x%x,", ((pos[2] & 0xf0) << 13) + 0xc0000); - - printk(KERN_DEBUG " port-offset=0x%x, subsystem=%s\n", ((pos[2] & 0x0e) << 2), (pos[2] & 1) ? "enabled." : "disabled."); - } - - /* check I/O region */ - if (!request_region(port, IM_N_IO_PORT, description)) { - printk(KERN_ERR "IBM MCA SCSI: Unable to get I/O region 0x%x-0x%x (%d ports).\n", port, port + IM_N_IO_PORT - 1, IM_N_IO_PORT); - goto out_fail; - } - - /* register host */ - shpnt = scsi_host_alloc(&ibmmca_driver_template, - sizeof(struct ibmmca_hostdata)); - if (!shpnt) { - printk(KERN_ERR "IBM MCA SCSI: Unable to register host.\n"); - goto out_release; - } - - dev_set_drvdata(dev, shpnt); - if(request_irq(irq, interrupt_handler, IRQF_SHARED, description, dev)) { - printk(KERN_ERR "IBM MCA SCSI: failed to request interrupt %d\n", irq); - goto out_free_host; - } - - /* request I/O region */ - special(shpnt) = mca_dev->index; /* important assignment or else crash! */ - subsystem_connector_size(shpnt) = 0; /* preset slot-size */ - shpnt->irq = irq; /* assign necessary stuff for the adapter */ - shpnt->io_port = port; - shpnt->n_io_port = IM_N_IO_PORT; - shpnt->this_id = id; - shpnt->max_id = 8; /* 8 PUNs are default */ - /* now, the SCSI-subsystem is connected to Linux */ - -#ifdef IM_DEBUG_PROBE - ctrl = (unsigned int) (inb(IM_CTR_REG(found))); /* get control-register status */ - printk("IBM MCA SCSI: Control Register contents: %x, status: %x\n", ctrl, inb(IM_STAT_REG(found))); - printk("IBM MCA SCSI: This adapters' POS-registers: "); - for (i = 0; i < 8; i++) - printk("%x ", pos[i]); - printk("\n"); -#endif - reset_status(shpnt) = IM_RESET_NOT_IN_PROGRESS; - - for (i = 0; i < 16; i++) /* reset the tables */ - for (j = 0; j < 8; j++) - get_ldn(shpnt)[i][j] = MAX_LOG_DEV; - - /* check which logical devices exist */ - /* after this line, local interrupting is possible: */ - local_checking_phase_flag(shpnt) = 1; - check_devices(shpnt, mca_dev->index); /* call by value, using the global variable hosts */ - local_checking_phase_flag(shpnt) = 0; - - /* an ibm mca subsystem has been detected */ - - for (k = 2; k < 7; k++) - ((struct ibmmca_hostdata *) shpnt->hostdata)->_pos[k] = pos[k]; - ((struct ibmmca_hostdata *) shpnt->hostdata)->_special = INTEGRATED_SCSI; - mca_device_set_name(mca_dev, description); - /* FIXME: NEED TO REPLUMB TO SYSFS - mca_set_adapter_procfn(MCA_INTEGSCSI, (MCA_ProcFn) ibmmca_getinfo, shpnt); - */ - mca_device_set_claim(mca_dev, 1); - if (scsi_add_host(shpnt, dev)) { - dev_printk(KERN_ERR, dev, "IBM MCA SCSI: scsi_add_host failed\n"); - goto out_free_host; - } - scsi_scan_host(shpnt); - - return 0; - out_free_host: - scsi_host_put(shpnt); - out_release: - release_region(port, IM_N_IO_PORT); - out_fail: - return ret; -} - -static int __devexit ibmmca_remove(struct device *dev) -{ - struct Scsi_Host *shpnt = dev_get_drvdata(dev); - scsi_remove_host(shpnt); - release_region(shpnt->io_port, shpnt->n_io_port); - free_irq(shpnt->irq, dev); - scsi_host_put(shpnt); - return 0; -} - -/* The following routine is the SCSI command queue for the midlevel driver */ -static int ibmmca_queuecommand_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *)) -{ - unsigned int ldn; - unsigned int scsi_cmd; - struct im_scb *scb; - struct Scsi_Host *shpnt; - int current_ldn; - int id, lun; - int target; - int max_pun; - int i; - struct scatterlist *sg; - - shpnt = cmd->device->host; - - max_pun = subsystem_maxid(shpnt); - if (ibm_ansi_order) { - target = max_pun - 1 - cmd->device->id; - if ((target <= subsystem_pun(shpnt)) && (cmd->device->id <= subsystem_pun(shpnt))) - target--; - else if ((target >= subsystem_pun(shpnt)) && (cmd->device->id >= subsystem_pun(shpnt))) - target++; - } else - target = cmd->device->id; - - /* if (target,lun) is NO LUN or not existing at all, return error */ - if ((get_scsi(shpnt)[target][cmd->device->lun] == TYPE_NO_LUN) || (get_scsi(shpnt)[target][cmd->device->lun] == TYPE_NO_DEVICE)) { - cmd->result = DID_NO_CONNECT << 16; - if (done) - done(cmd); - return 0; - } - - /*if (target,lun) unassigned, do further checks... */ - ldn = get_ldn(shpnt)[target][cmd->device->lun]; - if (ldn >= MAX_LOG_DEV) { /* on invalid ldn do special stuff */ - if (ldn > MAX_LOG_DEV) { /* dynamical remapping if ldn unassigned */ - current_ldn = next_ldn(shpnt); /* stop-value for one circle */ - while (ld(shpnt)[next_ldn(shpnt)].cmd) { /* search for a occupied, but not in */ - /* command-processing ldn. */ - next_ldn(shpnt)++; - if (next_ldn(shpnt) >= MAX_LOG_DEV) - next_ldn(shpnt) = 7; - if (current_ldn == next_ldn(shpnt)) { /* One circle done ? */ - /* no non-processing ldn found */ - scmd_printk(KERN_WARNING, cmd, - "IBM MCA SCSI: Cannot assign SCSI-device dynamically!\n" - " On ldn 7-14 SCSI-commands everywhere in progress.\n" - " Reporting DID_NO_CONNECT for device.\n"); - cmd->result = DID_NO_CONNECT << 16; /* return no connect */ - if (done) - done(cmd); - return 0; - } - } - - /* unmap non-processing ldn */ - for (id = 0; id < max_pun; id++) - for (lun = 0; lun < 8; lun++) { - if (get_ldn(shpnt)[id][lun] == next_ldn(shpnt)) { - get_ldn(shpnt)[id][lun] = TYPE_NO_DEVICE; - get_scsi(shpnt)[id][lun] = TYPE_NO_DEVICE; - /* unmap entry */ - } - } - /* set reduced interrupt_handler-mode for checking */ - local_checking_phase_flag(shpnt) = 1; - /* map found ldn to pun,lun */ - get_ldn(shpnt)[target][cmd->device->lun] = next_ldn(shpnt); - /* change ldn to the right value, that is now next_ldn */ - ldn = next_ldn(shpnt); - /* unassign all ldns (pun,lun,ldn does not matter for remove) */ - immediate_assign(shpnt, 0, 0, 0, REMOVE_LDN); - /* set only LDN for remapped device */ - immediate_assign(shpnt, target, cmd->device->lun, ldn, SET_LDN); - /* get device information for ld[ldn] */ - if (device_exists(shpnt, ldn, &ld(shpnt)[ldn].block_length, &ld(shpnt)[ldn].device_type)) { - ld(shpnt)[ldn].cmd = NULL; /* To prevent panic set 0, because - devices that were not assigned, - should have nothing in progress. */ - get_scsi(shpnt)[target][cmd->device->lun] = ld(shpnt)[ldn].device_type; - /* increase assignment counters for statistics in /proc */ - IBM_DS(shpnt).dynamical_assignments++; - IBM_DS(shpnt).ldn_assignments[ldn]++; - } else - /* panic here, because a device, found at boottime has - vanished */ - panic("IBM MCA SCSI: ldn=0x%x, SCSI-device on (%d,%d) vanished!\n", ldn, target, cmd->device->lun); - /* unassign again all ldns (pun,lun,ldn does not matter for remove) */ - immediate_assign(shpnt, 0, 0, 0, REMOVE_LDN); - /* remap all ldns, as written in the pun/lun table */ - lun = 0; -#ifdef CONFIG_SCSI_MULTI_LUN - for (lun = 0; lun < 8; lun++) -#endif - for (id = 0; id < max_pun; id++) { - if (get_ldn(shpnt)[id][lun] <= MAX_LOG_DEV) - immediate_assign(shpnt, id, lun, get_ldn(shpnt)[id][lun], SET_LDN); - } - /* set back to normal interrupt_handling */ - local_checking_phase_flag(shpnt) = 0; -#ifdef IM_DEBUG_PROBE - /* Information on syslog terminal */ - printk("IBM MCA SCSI: ldn=0x%x dynamically reassigned to (%d,%d).\n", ldn, target, cmd->device->lun); -#endif - /* increase next_ldn for next dynamical assignment */ - next_ldn(shpnt)++; - if (next_ldn(shpnt) >= MAX_LOG_DEV) - next_ldn(shpnt) = 7; - } else { /* wall against Linux accesses to the subsystem adapter */ - cmd->result = DID_BAD_TARGET << 16; - if (done) - done(cmd); - return 0; - } - } - - /*verify there is no command already in progress for this log dev */ - if (ld(shpnt)[ldn].cmd) - panic("IBM MCA SCSI: cmd already in progress for this ldn.\n"); - - /*save done in cmd, and save cmd for the interrupt handler */ - cmd->scsi_done = done; - ld(shpnt)[ldn].cmd = cmd; - - /*fill scb information independent of the scsi command */ - scb = &(ld(shpnt)[ldn].scb); - ld(shpnt)[ldn].tsb.dev_status = 0; - scb->enable = IM_REPORT_TSB_ONLY_ON_ERROR | IM_RETRY_ENABLE; - scb->tsb_adr = isa_virt_to_bus(&(ld(shpnt)[ldn].tsb)); - scsi_cmd = cmd->cmnd[0]; - - if (scsi_sg_count(cmd)) { - BUG_ON(scsi_sg_count(cmd) > 16); - - scsi_for_each_sg(cmd, sg, scsi_sg_count(cmd), i) { - ld(shpnt)[ldn].sge[i].address = (void *) (isa_page_to_bus(sg_page(sg)) + sg->offset); - ld(shpnt)[ldn].sge[i].byte_length = sg->length; - } - scb->enable |= IM_POINTER_TO_LIST; - scb->sys_buf_adr = isa_virt_to_bus(&(ld(shpnt)[ldn].sge[0])); - scb->sys_buf_length = scsi_sg_count(cmd) * sizeof(struct im_sge); - } else { - scb->sys_buf_adr = isa_virt_to_bus(scsi_sglist(cmd)); - /* recent Linux midlevel SCSI places 1024 byte for inquiry - * command. Far too much for old PS/2 hardware. */ - switch (scsi_cmd) { - /* avoid command errors by setting bufferlengths to - * ANSI-standard. Beware of forcing it to 255, - * this could SEGV the kernel!!! */ - case INQUIRY: - case REQUEST_SENSE: - case MODE_SENSE: - case MODE_SELECT: - if (scsi_bufflen(cmd) > 255) - scb->sys_buf_length = 255; - else - scb->sys_buf_length = scsi_bufflen(cmd); - break; - case TEST_UNIT_READY: - scb->sys_buf_length = 0; - break; - default: - scb->sys_buf_length = scsi_bufflen(cmd); - break; - } - } - /*fill scb information dependent on scsi command */ - -#ifdef IM_DEBUG_CMD - printk("issue scsi cmd=%02x to ldn=%d\n", scsi_cmd, ldn); -#endif - - /* for specific device-type debugging: */ -#ifdef IM_DEBUG_CMD_SPEC_DEV - if (ld(shpnt)[ldn].device_type == IM_DEBUG_CMD_DEVICE) - printk("(SCSI-device-type=0x%x) issue scsi cmd=%02x to ldn=%d\n", ld(shpnt)[ldn].device_type, scsi_cmd, ldn); -#endif - - /* for possible panics store current command */ - last_scsi_command(shpnt)[ldn] = scsi_cmd; - last_scsi_type(shpnt)[ldn] = IM_SCB; - /* update statistical info */ - IBM_DS(shpnt).total_accesses++; - IBM_DS(shpnt).ldn_access[ldn]++; - - switch (scsi_cmd) { - case READ_6: - case WRITE_6: - case READ_10: - case WRITE_10: - case READ_12: - case WRITE_12: - /* Distinguish between disk and other devices. Only disks (that are the - most frequently accessed devices) should be supported by the - IBM-SCSI-Subsystem commands. */ - switch (ld(shpnt)[ldn].device_type) { - case TYPE_DISK: /* for harddisks enter here ... */ - case TYPE_MOD: /* ... try it also for MO-drives (send flames as */ - /* you like, if this won't work.) */ - if (scsi_cmd == READ_6 || scsi_cmd == READ_10 || scsi_cmd == READ_12) { - /* read command preparations */ - scb->enable |= IM_READ_CONTROL; - IBM_DS(shpnt).ldn_read_access[ldn]++; /* increase READ-access on ldn stat. */ - scb->command = IM_READ_DATA_CMD | IM_NO_DISCONNECT; - } else { /* write command preparations */ - IBM_DS(shpnt).ldn_write_access[ldn]++; /* increase write-count on ldn stat. */ - scb->command = IM_WRITE_DATA_CMD | IM_NO_DISCONNECT; - } - if (scsi_cmd == READ_6 || scsi_cmd == WRITE_6) { - scb->u1.log_blk_adr = (((unsigned) cmd->cmnd[3]) << 0) | (((unsigned) cmd->cmnd[2]) << 8) | ((((unsigned) cmd->cmnd[1]) & 0x1f) << 16); - scb->u2.blk.count = (unsigned) cmd->cmnd[4]; - } else { - scb->u1.log_blk_adr = (((unsigned) cmd->cmnd[5]) << 0) | (((unsigned) cmd->cmnd[4]) << 8) | (((unsigned) cmd->cmnd[3]) << 16) | (((unsigned) cmd->cmnd[2]) << 24); - scb->u2.blk.count = (((unsigned) cmd->cmnd[8]) << 0) | (((unsigned) cmd->cmnd[7]) << 8); - } - last_scsi_logical_block(shpnt)[ldn] = scb->u1.log_blk_adr; - last_scsi_blockcount(shpnt)[ldn] = scb->u2.blk.count; - scb->u2.blk.length = ld(shpnt)[ldn].block_length; - break; - /* for other devices, enter here. Other types are not known by - Linux! TYPE_NO_LUN is forbidden as valid device. */ - case TYPE_ROM: - case TYPE_TAPE: - case TYPE_PROCESSOR: - case TYPE_WORM: - case TYPE_SCANNER: - case TYPE_MEDIUM_CHANGER: - /* If there is a sequential-device, IBM recommends to use - IM_OTHER_SCSI_CMD_CMD instead of subsystem READ/WRITE. - This includes CD-ROM devices, too, due to the partial sequential - read capabilities. */ - scb->command = IM_OTHER_SCSI_CMD_CMD; - if (scsi_cmd == READ_6 || scsi_cmd == READ_10 || scsi_cmd == READ_12) - /* enable READ */ - scb->enable |= IM_READ_CONTROL; - scb->enable |= IM_BYPASS_BUFFER; - scb->u1.scsi_cmd_length = cmd->cmd_len; - memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len); - last_scsi_type(shpnt)[ldn] = IM_LONG_SCB; - /* Read/write on this non-disk devices is also displayworthy, - so flash-up the LED/display. */ - break; - } - break; - case INQUIRY: - IBM_DS(shpnt).ldn_inquiry_access[ldn]++; - scb->command = IM_DEVICE_INQUIRY_CMD; - scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; - scb->u1.log_blk_adr = 0; - break; - case TEST_UNIT_READY: - scb->command = IM_OTHER_SCSI_CMD_CMD; - scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; - scb->u1.log_blk_adr = 0; - scb->u1.scsi_cmd_length = 6; - memcpy(scb->u2.scsi_command, cmd->cmnd, 6); - last_scsi_type(shpnt)[ldn] = IM_LONG_SCB; - break; - case READ_CAPACITY: - /* the length of system memory buffer must be exactly 8 bytes */ - scb->command = IM_READ_CAPACITY_CMD; - scb->enable |= IM_READ_CONTROL | IM_BYPASS_BUFFER; - if (scb->sys_buf_length > 8) - scb->sys_buf_length = 8; - break; - /* Commands that need read-only-mode (system <- device): */ - case REQUEST_SENSE: - scb->command = IM_REQUEST_SENSE_CMD; - scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; - break; - /* Commands that need write-only-mode (system -> device): */ - case MODE_SELECT: - case MODE_SELECT_10: - IBM_DS(shpnt).ldn_modeselect_access[ldn]++; - scb->command = IM_OTHER_SCSI_CMD_CMD; - scb->enable |= IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; /*Select needs WRITE-enabled */ - scb->u1.scsi_cmd_length = cmd->cmd_len; - memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len); - last_scsi_type(shpnt)[ldn] = IM_LONG_SCB; - break; - /* For other commands, read-only is useful. Most other commands are - running without an input-data-block. */ - default: - scb->command = IM_OTHER_SCSI_CMD_CMD; - scb->enable |= IM_READ_CONTROL | IM_SUPRESS_EXCEPTION_SHORT | IM_BYPASS_BUFFER; - scb->u1.scsi_cmd_length = cmd->cmd_len; - memcpy(scb->u2.scsi_command, cmd->cmnd, cmd->cmd_len); - last_scsi_type(shpnt)[ldn] = IM_LONG_SCB; - break; - } - /*issue scb command, and return */ - if (++disk_rw_in_progress == 1) - PS2_DISK_LED_ON(shpnt->host_no, target); - - if (last_scsi_type(shpnt)[ldn] == IM_LONG_SCB) { - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_LONG_SCB | ldn); - IBM_DS(shpnt).long_scbs++; - } else { - issue_cmd(shpnt, isa_virt_to_bus(scb), IM_SCB | ldn); - IBM_DS(shpnt).scbs++; - } - return 0; -} - -static DEF_SCSI_QCMD(ibmmca_queuecommand) - -static int __ibmmca_abort(Scsi_Cmnd * cmd) -{ - /* Abort does not work, as the adapter never generates an interrupt on - * whatever situation is simulated, even when really pending commands - * are running on the adapters' hardware ! */ - - struct Scsi_Host *shpnt; - unsigned int ldn; - void (*saved_done) (Scsi_Cmnd *); - int target; - int max_pun; - unsigned long imm_command; - -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort subroutine called...\n"); -#endif - - shpnt = cmd->device->host; - - max_pun = subsystem_maxid(shpnt); - if (ibm_ansi_order) { - target = max_pun - 1 - cmd->device->id; - if ((target <= subsystem_pun(shpnt)) && (cmd->device->id <= subsystem_pun(shpnt))) - target--; - else if ((target >= subsystem_pun(shpnt)) && (cmd->device->id >= subsystem_pun(shpnt))) - target++; - } else - target = cmd->device->id; - - /* get logical device number, and disable system interrupts */ - printk(KERN_WARNING "IBM MCA SCSI: Sending abort to device pun=%d, lun=%d.\n", target, cmd->device->lun); - ldn = get_ldn(shpnt)[target][cmd->device->lun]; - - /*if cmd for this ldn has already finished, no need to abort */ - if (!ld(shpnt)[ldn].cmd) { - return SUCCESS; - } - - /* Clear ld.cmd, save done function, install internal done, - * send abort immediate command (this enables sys. interrupts), - * and wait until the interrupt arrives. - */ - saved_done = cmd->scsi_done; - cmd->scsi_done = internal_done; - cmd->SCp.Status = 0; - last_scsi_command(shpnt)[ldn] = IM_ABORT_IMM_CMD; - last_scsi_type(shpnt)[ldn] = IM_IMM_CMD; - imm_command = inl(IM_CMD_REG(shpnt)); - imm_command &= (unsigned long) (0xffff0000); /* mask reserved stuff */ - imm_command |= (unsigned long) (IM_ABORT_IMM_CMD); - /* must wait for attention reg not busy */ - /* FIXME - timeout, politeness */ - while (1) { - if (!(inb(IM_STAT_REG(shpnt)) & IM_BUSY)) - break; - } - /* write registers and enable system interrupts */ - outl(imm_command, IM_CMD_REG(shpnt)); - outb(IM_IMM_CMD | ldn, IM_ATTN_REG(shpnt)); -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort queued to adapter...\n"); -#endif - spin_unlock_irq(shpnt->host_lock); - while (!cmd->SCp.Status) - yield(); - spin_lock_irq(shpnt->host_lock); - cmd->scsi_done = saved_done; -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort returned with adapter response...\n"); -#endif - - /*if abort went well, call saved done, then return success or error */ - if (cmd->result == (DID_ABORT << 16)) - { - cmd->result |= DID_ABORT << 16; - if (cmd->scsi_done) - (cmd->scsi_done) (cmd); - ld(shpnt)[ldn].cmd = NULL; -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort finished with success.\n"); -#endif - return SUCCESS; - } else { - cmd->result |= DID_NO_CONNECT << 16; - if (cmd->scsi_done) - (cmd->scsi_done) (cmd); - ld(shpnt)[ldn].cmd = NULL; -#ifdef IM_DEBUG_PROBE - printk("IBM MCA SCSI: Abort failed.\n"); -#endif - return FAILED; - } -} - -static int ibmmca_abort(Scsi_Cmnd * cmd) -{ - struct Scsi_Host *shpnt = cmd->device->host; - int rc; - - spin_lock_irq(shpnt->host_lock); - rc = __ibmmca_abort(cmd); - spin_unlock_irq(shpnt->host_lock); - - return rc; -} - -static int __ibmmca_host_reset(Scsi_Cmnd * cmd) -{ - struct Scsi_Host *shpnt; - Scsi_Cmnd *cmd_aid; - int ticks, i; - unsigned long imm_command; - - BUG_ON(cmd == NULL); - - ticks = IM_RESET_DELAY * HZ; - shpnt = cmd->device->host; - - if (local_checking_phase_flag(shpnt)) { - printk(KERN_WARNING "IBM MCA SCSI: unable to reset while checking devices.\n"); - return FAILED; - } - - /* issue reset immediate command to subsystem, and wait for interrupt */ - printk("IBM MCA SCSI: resetting all devices.\n"); - reset_status(shpnt) = IM_RESET_IN_PROGRESS; - last_scsi_command(shpnt)[0xf] = IM_RESET_IMM_CMD; - last_scsi_type(shpnt)[0xf] = IM_IMM_CMD; - imm_command = inl(IM_CMD_REG(shpnt)); - imm_command &= (unsigned long) (0xffff0000); /* mask reserved stuff */ - imm_command |= (unsigned long) (IM_RESET_IMM_CMD); - /* must wait for attention reg not busy */ - while (1) { - if (!(inb(IM_STAT_REG(shpnt)) & IM_BUSY)) - break; - spin_unlock_irq(shpnt->host_lock); - yield(); - spin_lock_irq(shpnt->host_lock); - } - /*write registers and enable system interrupts */ - outl(imm_command, IM_CMD_REG(shpnt)); - outb(IM_IMM_CMD | 0xf, IM_ATTN_REG(shpnt)); - /* wait for interrupt finished or intr_stat register to be set, as the - * interrupt will not be executed, while we are in here! */ - - /* FIXME: This is really really icky we so want a sleeping version of this ! */ - while (reset_status(shpnt) == IM_RESET_IN_PROGRESS && --ticks && ((inb(IM_INTR_REG(shpnt)) & 0x8f) != 0x8f)) { - udelay((1 + 999 / HZ) * 1000); - barrier(); - } - /* if reset did not complete, just return an error */ - if (!ticks) { - printk(KERN_ERR "IBM MCA SCSI: reset did not complete within %d seconds.\n", IM_RESET_DELAY); - reset_status(shpnt) = IM_RESET_FINISHED_FAIL; - return FAILED; - } - - if ((inb(IM_INTR_REG(shpnt)) & 0x8f) == 0x8f) { - /* analysis done by this routine and not by the intr-routine */ - if (inb(IM_INTR_REG(shpnt)) == 0xaf) - reset_status(shpnt) = IM_RESET_FINISHED_OK_NO_INT; - else if (inb(IM_INTR_REG(shpnt)) == 0xcf) - reset_status(shpnt) = IM_RESET_FINISHED_FAIL; - else /* failed, 4get it */ - reset_status(shpnt) = IM_RESET_NOT_IN_PROGRESS_NO_INT; - outb(IM_EOI | 0xf, IM_ATTN_REG(shpnt)); - } - - /* if reset failed, just return an error */ - if (reset_status(shpnt) == IM_RESET_FINISHED_FAIL) { - printk(KERN_ERR "IBM MCA SCSI: reset failed.\n"); - return FAILED; - } - - /* so reset finished ok - call outstanding done's, and return success */ - printk(KERN_INFO "IBM MCA SCSI: Reset successfully completed.\n"); - for (i = 0; i < MAX_LOG_DEV; i++) { - cmd_aid = ld(shpnt)[i].cmd; - if (cmd_aid && cmd_aid->scsi_done) { - ld(shpnt)[i].cmd = NULL; - cmd_aid->result = DID_RESET << 16; - } - } - return SUCCESS; -} - -static int ibmmca_host_reset(Scsi_Cmnd * cmd) -{ - struct Scsi_Host *shpnt = cmd->device->host; - int rc; - - spin_lock_irq(shpnt->host_lock); - rc = __ibmmca_host_reset(cmd); - spin_unlock_irq(shpnt->host_lock); - - return rc; -} - -static int ibmmca_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int *info) -{ - int size = capacity; - info[0] = 64; - info[1] = 32; - info[2] = size / (info[0] * info[1]); - if (info[2] >= 1024) { - info[0] = 128; - info[1] = 63; - info[2] = size / (info[0] * info[1]); - if (info[2] >= 1024) { - info[0] = 255; - info[1] = 63; - info[2] = size / (info[0] * info[1]); - if (info[2] >= 1024) - info[2] = 1023; - } - } - return 0; -} - -/* calculate percentage of total accesses on a ldn */ -static int ldn_access_load(struct Scsi_Host *shpnt, int ldn) -{ - if (IBM_DS(shpnt).total_accesses == 0) - return (0); - if (IBM_DS(shpnt).ldn_access[ldn] == 0) - return (0); - return (IBM_DS(shpnt).ldn_access[ldn] * 100) / IBM_DS(shpnt).total_accesses; -} - -/* calculate total amount of r/w-accesses */ -static int ldn_access_total_read_write(struct Scsi_Host *shpnt) -{ - int a; - int i; - - a = 0; - for (i = 0; i <= MAX_LOG_DEV; i++) - a += IBM_DS(shpnt).ldn_read_access[i] + IBM_DS(shpnt).ldn_write_access[i]; - return (a); -} - -static int ldn_access_total_inquiry(struct Scsi_Host *shpnt) -{ - int a; - int i; - - a = 0; - for (i = 0; i <= MAX_LOG_DEV; i++) - a += IBM_DS(shpnt).ldn_inquiry_access[i]; - return (a); -} - -static int ldn_access_total_modeselect(struct Scsi_Host *shpnt) -{ - int a; - int i; - - a = 0; - for (i = 0; i <= MAX_LOG_DEV; i++) - a += IBM_DS(shpnt).ldn_modeselect_access[i]; - return (a); -} - -/* routine to display info in the proc-fs-structure (a deluxe feature) */ -static int ibmmca_proc_info(struct Scsi_Host *shpnt, char *buffer, char **start, off_t offset, int length, int inout) -{ - int len = 0; - int i, id, lun; - unsigned long flags; - int max_pun; - - - spin_lock_irqsave(shpnt->host_lock, flags); /* Check it */ - - max_pun = subsystem_maxid(shpnt); - - len += sprintf(buffer + len, "\n IBM-SCSI-Subsystem-Linux-Driver, Version %s\n\n\n", IBMMCA_SCSI_DRIVER_VERSION); - len += sprintf(buffer + len, " SCSI Access-Statistics:\n"); - len += sprintf(buffer + len, " Device Scanning Order....: %s\n", (ibm_ansi_order) ? "IBM/ANSI" : "New Industry Standard"); -#ifdef CONFIG_SCSI_MULTI_LUN - len += sprintf(buffer + len, " Multiple LUN probing.....: Yes\n"); -#else - len += sprintf(buffer + len, " Multiple LUN probing.....: No\n"); -#endif - len += sprintf(buffer + len, " This Hostnumber..........: %d\n", shpnt->host_no); - len += sprintf(buffer + len, " Base I/O-Port............: 0x%x\n", (unsigned int) (IM_CMD_REG(shpnt))); - len += sprintf(buffer + len, " (Shared) IRQ.............: %d\n", IM_IRQ); - len += sprintf(buffer + len, " Total Interrupts.........: %d\n", IBM_DS(shpnt).total_interrupts); - len += sprintf(buffer + len, " Total SCSI Accesses......: %d\n", IBM_DS(shpnt).total_accesses); - len += sprintf(buffer + len, " Total short SCBs.........: %d\n", IBM_DS(shpnt).scbs); - len += sprintf(buffer + len, " Total long SCBs..........: %d\n", IBM_DS(shpnt).long_scbs); - len += sprintf(buffer + len, " Total SCSI READ/WRITE..: %d\n", ldn_access_total_read_write(shpnt)); - len += sprintf(buffer + len, " Total SCSI Inquiries...: %d\n", ldn_access_total_inquiry(shpnt)); - len += sprintf(buffer + len, " Total SCSI Modeselects.: %d\n", ldn_access_total_modeselect(shpnt)); - len += sprintf(buffer + len, " Total SCSI other cmds..: %d\n", IBM_DS(shpnt).total_accesses - ldn_access_total_read_write(shpnt) - - ldn_access_total_modeselect(shpnt) - - ldn_access_total_inquiry(shpnt)); - len += sprintf(buffer + len, " Total SCSI command fails.: %d\n\n", IBM_DS(shpnt).total_errors); - len += sprintf(buffer + len, " Logical-Device-Number (LDN) Access-Statistics:\n"); - len += sprintf(buffer + len, " LDN | Accesses [%%] | READ | WRITE | ASSIGNMENTS\n"); - len += sprintf(buffer + len, " -----|--------------|-----------|-----------|--------------\n"); - for (i = 0; i <= MAX_LOG_DEV; i++) - len += sprintf(buffer + len, " %2X | %3d | %8d | %8d | %8d\n", i, ldn_access_load(shpnt, i), IBM_DS(shpnt).ldn_read_access[i], IBM_DS(shpnt).ldn_write_access[i], IBM_DS(shpnt).ldn_assignments[i]); - len += sprintf(buffer + len, " -----------------------------------------------------------\n\n"); - len += sprintf(buffer + len, " Dynamical-LDN-Assignment-Statistics:\n"); - len += sprintf(buffer + len, " Number of physical SCSI-devices..: %d (+ Adapter)\n", IBM_DS(shpnt).total_scsi_devices); - len += sprintf(buffer + len, " Dynamical Assignment necessary...: %s\n", IBM_DS(shpnt).dyn_flag ? "Yes" : "No "); - len += sprintf(buffer + len, " Next LDN to be assigned..........: 0x%x\n", next_ldn(shpnt)); - len += sprintf(buffer + len, " Dynamical assignments done yet...: %d\n", IBM_DS(shpnt).dynamical_assignments); - len += sprintf(buffer + len, "\n Current SCSI-Device-Mapping:\n"); - len += sprintf(buffer + len, " Physical SCSI-Device Map Logical SCSI-Device Map\n"); - len += sprintf(buffer + len, " ID\\LUN 0 1 2 3 4 5 6 7 ID\\LUN 0 1 2 3 4 5 6 7\n"); - for (id = 0; id < max_pun; id++) { - len += sprintf(buffer + len, " %2d ", id); - for (lun = 0; lun < 8; lun++) - len += sprintf(buffer + len, "%2s ", ti_p(get_scsi(shpnt)[id][lun])); - len += sprintf(buffer + len, " %2d ", id); - for (lun = 0; lun < 8; lun++) - len += sprintf(buffer + len, "%2s ", ti_l(get_ldn(shpnt)[id][lun])); - len += sprintf(buffer + len, "\n"); - } - - len += sprintf(buffer + len, "(A = IBM-Subsystem, D = Harddisk, T = Tapedrive, P = Processor, W = WORM,\n"); - len += sprintf(buffer + len, " R = CD-ROM, S = Scanner, M = MO-Drive, C = Medium-Changer, + = unprovided LUN,\n"); - len += sprintf(buffer + len, " - = nothing found, nothing assigned or unprobed LUN)\n\n"); - - *start = buffer + offset; - len -= offset; - if (len > length) - len = length; - spin_unlock_irqrestore(shpnt->host_lock, flags); - return len; -} - -static int option_setup(char *str) -{ - int ints[IM_MAX_HOSTS]; - char *cur = str; - int i = 1; - - while (cur && isdigit(*cur) && i < IM_MAX_HOSTS) { - ints[i++] = simple_strtoul(cur, NULL, 0); - if ((cur = strchr(cur, ',')) != NULL) - cur++; - } - ints[0] = i - 1; - internal_ibmmca_scsi_setup(cur, ints); - return 1; -} - -__setup("ibmmcascsi=", option_setup); - -static struct mca_driver ibmmca_driver = { - .id_table = ibmmca_id_table, - .driver = { - .name = "ibmmca", - .bus = &mca_bus_type, - .probe = ibmmca_probe, - .remove = __devexit_p(ibmmca_remove), - }, -}; - -static int __init ibmmca_init(void) -{ -#ifdef MODULE - /* If the driver is run as module, read from conf.modules or cmd-line */ - if (boot_options) - option_setup(boot_options); -#endif - - return mca_register_driver_integrated(&ibmmca_driver, MCA_INTEGSCSI); -} - -static void __exit ibmmca_exit(void) -{ - mca_unregister_driver(&ibmmca_driver); -} - -module_init(ibmmca_init); -module_exit(ibmmca_exit); |