summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/isci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/isci')
-rw-r--r--drivers/scsi/isci/firmware/Makefile19
-rw-r--r--drivers/scsi/isci/firmware/README36
-rw-r--r--drivers/scsi/isci/firmware/create_fw.c99
-rw-r--r--drivers/scsi/isci/firmware/create_fw.h77
-rw-r--r--drivers/scsi/isci/host.c340
-rw-r--r--drivers/scsi/isci/host.h27
-rw-r--r--drivers/scsi/isci/init.c25
-rw-r--r--drivers/scsi/isci/isci.h1
-rw-r--r--drivers/scsi/isci/phy.c172
-rw-r--r--drivers/scsi/isci/port.c104
-rw-r--r--drivers/scsi/isci/port.h10
-rw-r--r--drivers/scsi/isci/port_config.c35
-rw-r--r--drivers/scsi/isci/probe_roms.c2
-rw-r--r--drivers/scsi/isci/probe_roms.h89
-rw-r--r--drivers/scsi/isci/remote_device.c10
-rw-r--r--drivers/scsi/isci/task.c2
-rw-r--r--drivers/scsi/isci/task.h7
17 files changed, 610 insertions, 445 deletions
diff --git a/drivers/scsi/isci/firmware/Makefile b/drivers/scsi/isci/firmware/Makefile
deleted file mode 100644
index 5f54461cabc..00000000000
--- a/drivers/scsi/isci/firmware/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-# Makefile for create_fw
-#
-CC=gcc
-CFLAGS=-c -Wall -O2 -g
-LDFLAGS=
-SOURCES=create_fw.c
-OBJECTS=$(SOURCES:.cpp=.o)
-EXECUTABLE=create_fw
-
-all: $(SOURCES) $(EXECUTABLE)
-
-$(EXECUTABLE): $(OBJECTS)
- $(CC) $(LDFLAGS) $(OBJECTS) -o $@
-
-.c.o:
- $(CC) $(CFLAGS) $< -O $@
-
-clean:
- rm -f *.o $(EXECUTABLE)
diff --git a/drivers/scsi/isci/firmware/README b/drivers/scsi/isci/firmware/README
deleted file mode 100644
index 8056d2bd233..00000000000
--- a/drivers/scsi/isci/firmware/README
+++ /dev/null
@@ -1,36 +0,0 @@
-This defines the temporary binary blow we are to pass to the SCU
-driver to emulate the binary firmware that we will eventually be
-able to access via NVRAM on the SCU controller.
-
-The current size of the binary blob is expected to be 149 bytes or larger
-
-Header Types:
-0x1: Phy Masks
-0x2: Phy Gens
-0x3: SAS Addrs
-0xff: End of Data
-
-ID string - u8[12]: "#SCU MAGIC#\0"
-Version - u8: 1
-SubVersion - u8: 0
-
-Header Type - u8: 0x1
-Size - u8: 8
-Phy Mask - u32[8]
-
-Header Type - u8: 0x2
-Size - u8: 8
-Phy Gen - u32[8]
-
-Header Type - u8: 0x3
-Size - u8: 8
-Sas Addr - u64[8]
-
-Header Type - u8: 0xf
-
-
-==============================================================================
-
-Place isci_firmware.bin in /lib/firmware
-Be sure to recreate the initramfs image to include the firmware.
-
diff --git a/drivers/scsi/isci/firmware/create_fw.c b/drivers/scsi/isci/firmware/create_fw.c
deleted file mode 100644
index c7a2887a7e9..00000000000
--- a/drivers/scsi/isci/firmware/create_fw.c
+++ /dev/null
@@ -1,99 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <string.h>
-#include <errno.h>
-#include <asm/types.h>
-#include <strings.h>
-#include <stdint.h>
-
-#include "create_fw.h"
-#include "../probe_roms.h"
-
-int write_blob(struct isci_orom *isci_orom)
-{
- FILE *fd;
- int err;
- size_t count;
-
- fd = fopen(blob_name, "w+");
- if (!fd) {
- perror("Open file for write failed");
- fclose(fd);
- return -EIO;
- }
-
- count = fwrite(isci_orom, sizeof(struct isci_orom), 1, fd);
- if (count != 1) {
- perror("Write data failed");
- fclose(fd);
- return -EIO;
- }
-
- fclose(fd);
-
- return 0;
-}
-
-void set_binary_values(struct isci_orom *isci_orom)
-{
- int ctrl_idx, phy_idx, port_idx;
-
- /* setting OROM signature */
- strncpy(isci_orom->hdr.signature, sig, strlen(sig));
- isci_orom->hdr.version = version;
- isci_orom->hdr.total_block_length = sizeof(struct isci_orom);
- isci_orom->hdr.hdr_length = sizeof(struct sci_bios_oem_param_block_hdr);
- isci_orom->hdr.num_elements = num_elements;
-
- for (ctrl_idx = 0; ctrl_idx < 2; ctrl_idx++) {
- isci_orom->ctrl[ctrl_idx].controller.mode_type = mode_type;
- isci_orom->ctrl[ctrl_idx].controller.max_concurrent_dev_spin_up =
- max_num_concurrent_dev_spin_up;
- isci_orom->ctrl[ctrl_idx].controller.do_enable_ssc =
- enable_ssc;
-
- for (port_idx = 0; port_idx < 4; port_idx++)
- isci_orom->ctrl[ctrl_idx].ports[port_idx].phy_mask =
- phy_mask[ctrl_idx][port_idx];
-
- for (phy_idx = 0; phy_idx < 4; phy_idx++) {
- isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.high =
- (__u32)(sas_addr[ctrl_idx][phy_idx] >> 32);
- isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.low =
- (__u32)(sas_addr[ctrl_idx][phy_idx]);
-
- isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control0 =
- afe_tx_amp_control0;
- isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control1 =
- afe_tx_amp_control1;
- isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control2 =
- afe_tx_amp_control2;
- isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control3 =
- afe_tx_amp_control3;
- }
- }
-}
-
-int main(void)
-{
- int err;
- struct isci_orom *isci_orom;
-
- isci_orom = malloc(sizeof(struct isci_orom));
- memset(isci_orom, 0, sizeof(struct isci_orom));
-
- set_binary_values(isci_orom);
-
- err = write_blob(isci_orom);
- if (err < 0) {
- free(isci_orom);
- return err;
- }
-
- free(isci_orom);
- return 0;
-}
diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h
deleted file mode 100644
index 5f298828d22..00000000000
--- a/drivers/scsi/isci/firmware/create_fw.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#ifndef _CREATE_FW_H_
-#define _CREATE_FW_H_
-#include "../probe_roms.h"
-
-
-/* we are configuring for 2 SCUs */
-static const int num_elements = 2;
-
-/*
- * For all defined arrays:
- * elements 0-3 are for SCU0, ports 0-3
- * elements 4-7 are for SCU1, ports 0-3
- *
- * valid configurations for one SCU are:
- * P0 P1 P2 P3
- * ----------------
- * 0xF,0x0,0x0,0x0 # 1 x4 port
- * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1
- * # ports
- * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2
- * # port
- * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port
- * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration)
- *
- * if there is a port/phy on which you do not wish to override the default
- * values, use the value assigned to UNINIT_PARAM (255).
- */
-
-/* discovery mode type (port auto config mode by default ) */
-
-/*
- * if there is a port/phy on which you do not wish to override the default
- * values, use the value "0000000000000000". SAS address of zero's is
- * considered invalid and will not be used.
- */
-#ifdef MPC
-static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE;
-static const __u8 phy_mask[2][4] = { {1, 2, 4, 8},
- {1, 2, 4, 8} };
-static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL,
- 0x5FCFFFFFF0000002ULL,
- 0x5FCFFFFFF0000003ULL,
- 0x5FCFFFFFF0000004ULL },
- { 0x5FCFFFFFF0000005ULL,
- 0x5FCFFFFFF0000006ULL,
- 0x5FCFFFFFF0000007ULL,
- 0x5FCFFFFFF0000008ULL } };
-#else /* APC (default) */
-static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
-static const __u8 phy_mask[2][4];
-static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL,
- 0x5FCFFFFF00000001ULL,
- 0x5FCFFFFF00000001ULL,
- 0x5FCFFFFF00000001ULL },
- { 0x5FCFFFFF00000002ULL,
- 0x5FCFFFFF00000002ULL,
- 0x5FCFFFFF00000002ULL,
- 0x5FCFFFFF00000002ULL } };
-#endif
-
-/* Maximum number of concurrent device spin up */
-static const int max_num_concurrent_dev_spin_up = 1;
-
-/* enable of ssc operation */
-static const int enable_ssc;
-
-/* AFE_TX_AMP_CONTROL */
-static const unsigned int afe_tx_amp_control0 = 0x000bdd08;
-static const unsigned int afe_tx_amp_control1 = 0x000ffc00;
-static const unsigned int afe_tx_amp_control2 = 0x000b7c09;
-static const unsigned int afe_tx_amp_control3 = 0x000afc6e;
-
-static const char blob_name[] = "isci_firmware.bin";
-static const char sig[] = "ISCUOEMB";
-static const unsigned char version = 0x10;
-
-#endif
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index e7fe9c4c85b..1a65d651423 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -899,7 +899,8 @@ static enum sci_status sci_controller_start_next_phy(struct isci_host *ihost)
*/
if ((iphy->is_in_link_training == false && state == SCI_PHY_INITIAL) ||
(iphy->is_in_link_training == false && state == SCI_PHY_STOPPED) ||
- (iphy->is_in_link_training == true && is_phy_starting(iphy))) {
+ (iphy->is_in_link_training == true && is_phy_starting(iphy)) ||
+ (ihost->port_agent.phy_ready_mask != ihost->port_agent.phy_configured_mask)) {
is_controller_start_complete = false;
break;
}
@@ -1666,6 +1667,9 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost
/* Default to no SSC operation. */
ihost->oem_parameters.controller.do_enable_ssc = false;
+ /* Default to short cables on all phys. */
+ ihost->oem_parameters.controller.cable_selection_mask = 0;
+
/* Initialize all of the port parameter information to narrow ports. */
for (index = 0; index < SCI_MAX_PORTS; index++) {
ihost->oem_parameters.ports[index].phy_mask = 0;
@@ -1673,8 +1677,9 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost
/* Initialize all of the phy parameter information. */
for (index = 0; index < SCI_MAX_PHYS; index++) {
- /* Default to 6G (i.e. Gen 3) for now. */
- ihost->user_parameters.phys[index].max_speed_generation = 3;
+ /* Default to 3G (i.e. Gen 2). */
+ ihost->user_parameters.phys[index].max_speed_generation =
+ SCIC_SDS_PARM_GEN2_SPEED;
/* the frequencies cannot be 0 */
ihost->user_parameters.phys[index].align_insertion_frequency = 0x7f;
@@ -1694,7 +1699,7 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost
ihost->user_parameters.ssp_inactivity_timeout = 5;
ihost->user_parameters.stp_max_occupancy_timeout = 5;
ihost->user_parameters.ssp_max_occupancy_timeout = 20;
- ihost->user_parameters.no_outbound_task_timeout = 20;
+ ihost->user_parameters.no_outbound_task_timeout = 2;
}
static void controller_timeout(unsigned long data)
@@ -1759,7 +1764,7 @@ static enum sci_status sci_controller_construct(struct isci_host *ihost,
return sci_controller_reset(ihost);
}
-int sci_oem_parameters_validate(struct sci_oem_params *oem)
+int sci_oem_parameters_validate(struct sci_oem_params *oem, u8 version)
{
int i;
@@ -1791,18 +1796,61 @@ int sci_oem_parameters_validate(struct sci_oem_params *oem)
oem->controller.max_concurr_spin_up < 1)
return -EINVAL;
+ if (oem->controller.do_enable_ssc) {
+ if (version < ISCI_ROM_VER_1_1 && oem->controller.do_enable_ssc != 1)
+ return -EINVAL;
+
+ if (version >= ISCI_ROM_VER_1_1) {
+ u8 test = oem->controller.ssc_sata_tx_spread_level;
+
+ switch (test) {
+ case 0:
+ case 2:
+ case 3:
+ case 6:
+ case 7:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ test = oem->controller.ssc_sas_tx_spread_level;
+ if (oem->controller.ssc_sas_tx_type == 0) {
+ switch (test) {
+ case 0:
+ case 2:
+ case 3:
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else if (oem->controller.ssc_sas_tx_type == 1) {
+ switch (test) {
+ case 0:
+ case 3:
+ case 6:
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ }
+ }
+
return 0;
}
static enum sci_status sci_oem_parameters_set(struct isci_host *ihost)
{
u32 state = ihost->sm.current_state_id;
+ struct isci_pci_info *pci_info = to_pci_info(ihost->pdev);
if (state == SCIC_RESET ||
state == SCIC_INITIALIZING ||
state == SCIC_INITIALIZED) {
- if (sci_oem_parameters_validate(&ihost->oem_parameters))
+ if (sci_oem_parameters_validate(&ihost->oem_parameters,
+ pci_info->orom->hdr.version))
return SCI_FAILURE_INVALID_PARAMETER_VALUE;
return SCI_SUCCESS;
@@ -1857,6 +1905,31 @@ static void power_control_timeout(unsigned long data)
ihost->power_control.phys_waiting--;
ihost->power_control.phys_granted_power++;
sci_phy_consume_power_handler(iphy);
+
+ if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
+ u8 j;
+
+ for (j = 0; j < SCI_MAX_PHYS; j++) {
+ struct isci_phy *requester = ihost->power_control.requesters[j];
+
+ /*
+ * Search the power_control queue to see if there are other phys
+ * attached to the same remote device. If found, take all of
+ * them out of await_sas_power state.
+ */
+ if (requester != NULL && requester != iphy) {
+ u8 other = memcmp(requester->frame_rcvd.iaf.sas_addr,
+ iphy->frame_rcvd.iaf.sas_addr,
+ sizeof(requester->frame_rcvd.iaf.sas_addr));
+
+ if (other == 0) {
+ ihost->power_control.requesters[j] = NULL;
+ ihost->power_control.phys_waiting--;
+ sci_phy_consume_power_handler(requester);
+ }
+ }
+ }
+ }
}
/*
@@ -1891,9 +1964,34 @@ void sci_controller_power_control_queue_insert(struct isci_host *ihost,
ihost->power_control.timer_started = true;
} else {
- /* Add the phy in the waiting list */
- ihost->power_control.requesters[iphy->phy_index] = iphy;
- ihost->power_control.phys_waiting++;
+ /*
+ * There are phys, attached to the same sas address as this phy, are
+ * already in READY state, this phy don't need wait.
+ */
+ u8 i;
+ struct isci_phy *current_phy;
+
+ for (i = 0; i < SCI_MAX_PHYS; i++) {
+ u8 other;
+ current_phy = &ihost->phys[i];
+
+ other = memcmp(current_phy->frame_rcvd.iaf.sas_addr,
+ iphy->frame_rcvd.iaf.sas_addr,
+ sizeof(current_phy->frame_rcvd.iaf.sas_addr));
+
+ if (current_phy->sm.current_state_id == SCI_PHY_READY &&
+ current_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS &&
+ other == 0) {
+ sci_phy_consume_power_handler(iphy);
+ break;
+ }
+ }
+
+ if (i == SCI_MAX_PHYS) {
+ /* Add the phy in the waiting list */
+ ihost->power_control.requesters[iphy->phy_index] = iphy;
+ ihost->power_control.phys_waiting++;
+ }
}
}
@@ -1908,162 +2006,250 @@ void sci_controller_power_control_queue_remove(struct isci_host *ihost,
ihost->power_control.requesters[iphy->phy_index] = NULL;
}
+static int is_long_cable(int phy, unsigned char selection_byte)
+{
+ return !!(selection_byte & (1 << phy));
+}
+
+static int is_medium_cable(int phy, unsigned char selection_byte)
+{
+ return !!(selection_byte & (1 << (phy + 4)));
+}
+
+static enum cable_selections decode_selection_byte(
+ int phy,
+ unsigned char selection_byte)
+{
+ return ((selection_byte & (1 << phy)) ? 1 : 0)
+ + (selection_byte & (1 << (phy + 4)) ? 2 : 0);
+}
+
+static unsigned char *to_cable_select(struct isci_host *ihost)
+{
+ if (is_cable_select_overridden())
+ return ((unsigned char *)&cable_selection_override)
+ + ihost->id;
+ else
+ return &ihost->oem_parameters.controller.cable_selection_mask;
+}
+
+enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy)
+{
+ return decode_selection_byte(phy, *to_cable_select(ihost));
+}
+
+char *lookup_cable_names(enum cable_selections selection)
+{
+ static char *cable_names[] = {
+ [short_cable] = "short",
+ [long_cable] = "long",
+ [medium_cable] = "medium",
+ [undefined_cable] = "<undefined, assumed long>" /* bit 0==1 */
+ };
+ return (selection <= undefined_cable) ? cable_names[selection]
+ : cable_names[undefined_cable];
+}
+
#define AFE_REGISTER_WRITE_DELAY 10
-/* Initialize the AFE for this phy index. We need to read the AFE setup from
- * the OEM parameters
- */
static void sci_controller_afe_initialization(struct isci_host *ihost)
{
+ struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe;
const struct sci_oem_params *oem = &ihost->oem_parameters;
struct pci_dev *pdev = ihost->pdev;
u32 afe_status;
u32 phy_id;
+ unsigned char cable_selection_mask = *to_cable_select(ihost);
/* Clear DFX Status registers */
- writel(0x0081000f, &ihost->scu_registers->afe.afe_dfx_master_control0);
+ writel(0x0081000f, &afe->afe_dfx_master_control0);
udelay(AFE_REGISTER_WRITE_DELAY);
- if (is_b0(pdev)) {
+ if (is_b0(pdev) || is_c0(pdev) || is_c1(pdev)) {
/* PM Rx Equalization Save, PM SPhy Rx Acknowledgement
- * Timer, PM Stagger Timer */
- writel(0x0007BFFF, &ihost->scu_registers->afe.afe_pmsn_master_control2);
+ * Timer, PM Stagger Timer
+ */
+ writel(0x0007FFFF, &afe->afe_pmsn_master_control2);
udelay(AFE_REGISTER_WRITE_DELAY);
}
/* Configure bias currents to normal */
if (is_a2(pdev))
- writel(0x00005A00, &ihost->scu_registers->afe.afe_bias_control);
+ writel(0x00005A00, &afe->afe_bias_control);
else if (is_b0(pdev) || is_c0(pdev))
- writel(0x00005F00, &ihost->scu_registers->afe.afe_bias_control);
+ writel(0x00005F00, &afe->afe_bias_control);
+ else if (is_c1(pdev))
+ writel(0x00005500, &afe->afe_bias_control);
udelay(AFE_REGISTER_WRITE_DELAY);
/* Enable PLL */
- if (is_b0(pdev) || is_c0(pdev))
- writel(0x80040A08, &ihost->scu_registers->afe.afe_pll_control0);
- else
- writel(0x80040908, &ihost->scu_registers->afe.afe_pll_control0);
+ if (is_a2(pdev))
+ writel(0x80040908, &afe->afe_pll_control0);
+ else if (is_b0(pdev) || is_c0(pdev))
+ writel(0x80040A08, &afe->afe_pll_control0);
+ else if (is_c1(pdev)) {
+ writel(0x80000B08, &afe->afe_pll_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ writel(0x00000B08, &afe->afe_pll_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ writel(0x80000B08, &afe->afe_pll_control0);
+ }
udelay(AFE_REGISTER_WRITE_DELAY);
/* Wait for the PLL to lock */
do {
- afe_status = readl(&ihost->scu_registers->afe.afe_common_block_status);
+ afe_status = readl(&afe->afe_common_block_status);
udelay(AFE_REGISTER_WRITE_DELAY);
} while ((afe_status & 0x00001000) == 0);
if (is_a2(pdev)) {
- /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */
- writel(0x7bcc96ad, &ihost->scu_registers->afe.afe_pmsn_master_control0);
+ /* Shorten SAS SNW lock time (RxLock timer value from 76
+ * us to 50 us)
+ */
+ writel(0x7bcc96ad, &afe->afe_pmsn_master_control0);
udelay(AFE_REGISTER_WRITE_DELAY);
}
for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) {
+ struct scu_afe_transceiver *xcvr = &afe->scu_afe_xcvr[phy_id];
const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id];
+ int cable_length_long =
+ is_long_cable(phy_id, cable_selection_mask);
+ int cable_length_medium =
+ is_medium_cable(phy_id, cable_selection_mask);
- if (is_b0(pdev)) {
- /* Configure transmitter SSC parameters */
- writel(0x00030000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
+ if (is_a2(pdev)) {
+ /* All defaults, except the Receive Word
+ * Alignament/Comma Detect Enable....(0xe800)
+ */
+ writel(0x00004512, &xcvr->afe_xcvr_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(0x0050100F, &xcvr->afe_xcvr_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+ } else if (is_b0(pdev)) {
+ /* Configure transmitter SSC parameters */
+ writel(0x00030000, &xcvr->afe_tx_ssc_control);
udelay(AFE_REGISTER_WRITE_DELAY);
} else if (is_c0(pdev)) {
- /* Configure transmitter SSC parameters */
- writel(0x0003000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control);
+ /* Configure transmitter SSC parameters */
+ writel(0x00010202, &xcvr->afe_tx_ssc_control);
udelay(AFE_REGISTER_WRITE_DELAY);
- /*
- * All defaults, except the Receive Word Alignament/Comma Detect
- * Enable....(0xe800) */
- writel(0x00004500, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+ /* All defaults, except the Receive Word
+ * Alignament/Comma Detect Enable....(0xe800)
+ */
+ writel(0x00014500, &xcvr->afe_xcvr_control0);
udelay(AFE_REGISTER_WRITE_DELAY);
- } else {
- /*
- * All defaults, except the Receive Word Alignament/Comma Detect
- * Enable....(0xe800) */
- writel(0x00004512, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+ } else if (is_c1(pdev)) {
+ /* Configure transmitter SSC parameters */
+ writel(0x00010202, &xcvr->afe_tx_ssc_control);
udelay(AFE_REGISTER_WRITE_DELAY);
- writel(0x0050100F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1);
+ /* All defaults, except the Receive Word
+ * Alignament/Comma Detect Enable....(0xe800)
+ */
+ writel(0x0001C500, &xcvr->afe_xcvr_control0);
udelay(AFE_REGISTER_WRITE_DELAY);
}
- /*
- * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
- * & increase TX int & ext bias 20%....(0xe85c) */
+ /* Power up TX and RX out from power down (PWRDNTX and
+ * PWRDNRX) & increase TX int & ext bias 20%....(0xe85c)
+ */
if (is_a2(pdev))
- writel(0x000003F0, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ writel(0x000003F0, &xcvr->afe_channel_control);
else if (is_b0(pdev)) {
- /* Power down TX and RX (PWRDNTX and PWRDNRX) */
- writel(0x000003D7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ writel(0x000003D7, &xcvr->afe_channel_control);
udelay(AFE_REGISTER_WRITE_DELAY);
- /*
- * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
- * & increase TX int & ext bias 20%....(0xe85c) */
- writel(0x000003D4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
- } else {
- writel(0x000001E7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ writel(0x000003D4, &xcvr->afe_channel_control);
+ } else if (is_c0(pdev)) {
+ writel(0x000001E7, &xcvr->afe_channel_control);
udelay(AFE_REGISTER_WRITE_DELAY);
- /*
- * Power up TX and RX out from power down (PWRDNTX and PWRDNRX)
- * & increase TX int & ext bias 20%....(0xe85c) */
- writel(0x000001E4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control);
+ writel(0x000001E4, &xcvr->afe_channel_control);
+ } else if (is_c1(pdev)) {
+ writel(cable_length_long ? 0x000002F7 : 0x000001F7,
+ &xcvr->afe_channel_control);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(cable_length_long ? 0x000002F4 : 0x000001F4,
+ &xcvr->afe_channel_control);
}
udelay(AFE_REGISTER_WRITE_DELAY);
if (is_a2(pdev)) {
/* Enable TX equalization (0xe824) */
- writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
+ writel(0x00040000, &xcvr->afe_tx_control);
udelay(AFE_REGISTER_WRITE_DELAY);
}
- /*
- * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On),
- * RDD=0x0(RX Detect Enabled) ....(0xe800) */
- writel(0x00004100, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0);
+ if (is_a2(pdev) || is_b0(pdev))
+ /* RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0,
+ * TPD=0x0(TX Power On), RDD=0x0(RX Detect
+ * Enabled) ....(0xe800)
+ */
+ writel(0x00004100, &xcvr->afe_xcvr_control0);
+ else if (is_c0(pdev))
+ writel(0x00014100, &xcvr->afe_xcvr_control0);
+ else if (is_c1(pdev))
+ writel(0x0001C100, &xcvr->afe_xcvr_control0);
udelay(AFE_REGISTER_WRITE_DELAY);
/* Leave DFE/FFE on */
if (is_a2(pdev))
- writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+ writel(0x3F11103F, &xcvr->afe_rx_ssc_control0);
else if (is_b0(pdev)) {
- writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+ writel(0x3F11103F, &xcvr->afe_rx_ssc_control0);
udelay(AFE_REGISTER_WRITE_DELAY);
/* Enable TX equalization (0xe824) */
- writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
- } else {
- writel(0x0140DF0F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1);
+ writel(0x00040000, &xcvr->afe_tx_control);
+ } else if (is_c0(pdev)) {
+ writel(0x01400C0F, &xcvr->afe_rx_ssc_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(0x3F6F103F, &xcvr->afe_rx_ssc_control0);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ /* Enable TX equalization (0xe824) */
+ writel(0x00040000, &xcvr->afe_tx_control);
+ } else if (is_c1(pdev)) {
+ writel(cable_length_long ? 0x01500C0C :
+ cable_length_medium ? 0x01400C0D : 0x02400C0D,
+ &xcvr->afe_xcvr_control1);
+ udelay(AFE_REGISTER_WRITE_DELAY);
+
+ writel(0x000003E0, &xcvr->afe_dfx_rx_control1);
udelay(AFE_REGISTER_WRITE_DELAY);
- writel(0x3F6F103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0);
+ writel(cable_length_long ? 0x33091C1F :
+ cable_length_medium ? 0x3315181F : 0x2B17161F,
+ &xcvr->afe_rx_ssc_control0);
udelay(AFE_REGISTER_WRITE_DELAY);
/* Enable TX equalization (0xe824) */
- writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control);
+ writel(0x00040000, &xcvr->afe_tx_control);
}
udelay(AFE_REGISTER_WRITE_DELAY);
- writel(oem_phy->afe_tx_amp_control0,
- &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0);
+ writel(oem_phy->afe_tx_amp_control0, &xcvr->afe_tx_amp_control0);
udelay(AFE_REGISTER_WRITE_DELAY);
- writel(oem_phy->afe_tx_amp_control1,
- &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1);
+ writel(oem_phy->afe_tx_amp_control1, &xcvr->afe_tx_amp_control1);
udelay(AFE_REGISTER_WRITE_DELAY);
- writel(oem_phy->afe_tx_amp_control2,
- &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2);
+ writel(oem_phy->afe_tx_amp_control2, &xcvr->afe_tx_amp_control2);
udelay(AFE_REGISTER_WRITE_DELAY);
- writel(oem_phy->afe_tx_amp_control3,
- &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3);
+ writel(oem_phy->afe_tx_amp_control3, &xcvr->afe_tx_amp_control3);
udelay(AFE_REGISTER_WRITE_DELAY);
}
/* Transfer control to the PEs */
- writel(0x00010f00, &ihost->scu_registers->afe.afe_dfx_master_control0);
+ writel(0x00010f00, &afe->afe_dfx_master_control0);
udelay(AFE_REGISTER_WRITE_DELAY);
}
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 646051afd3c..5477f0fa823 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -435,11 +435,36 @@ static inline bool is_b0(struct pci_dev *pdev)
static inline bool is_c0(struct pci_dev *pdev)
{
- if (pdev->revision >= 5)
+ if (pdev->revision == 5)
return true;
return false;
}
+static inline bool is_c1(struct pci_dev *pdev)
+{
+ if (pdev->revision >= 6)
+ return true;
+ return false;
+}
+
+enum cable_selections {
+ short_cable = 0,
+ long_cable = 1,
+ medium_cable = 2,
+ undefined_cable = 3
+};
+
+#define CABLE_OVERRIDE_DISABLED (0x10000)
+
+static inline int is_cable_select_overridden(void)
+{
+ return cable_selection_override < CABLE_OVERRIDE_DISABLED;
+}
+
+enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy);
+void validate_cable_selections(struct isci_host *ihost);
+char *lookup_cable_names(enum cable_selections);
+
/* set hw control for 'activity', even though active enclosures seem to drive
* the activity led on their own. Skip setting FSENG control on 'status' due
* to unexpected operation and 'error' due to not being a supported automatic
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index a97edabcb85..17c4c2c89c2 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -65,7 +65,7 @@
#include "probe_roms.h"
#define MAJ 1
-#define MIN 0
+#define MIN 1
#define BUILD 0
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
__stringify(BUILD)
@@ -94,7 +94,7 @@ MODULE_DEVICE_TABLE(pci, isci_id_table);
/* linux isci specific settings */
-unsigned char no_outbound_task_to = 20;
+unsigned char no_outbound_task_to = 2;
module_param(no_outbound_task_to, byte, 0);
MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)");
@@ -114,7 +114,7 @@ u16 stp_inactive_to = 5;
module_param(stp_inactive_to, ushort, 0);
MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)");
-unsigned char phy_gen = 3;
+unsigned char phy_gen = SCIC_SDS_PARM_GEN2_SPEED;
module_param(phy_gen, byte, 0);
MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)");
@@ -122,6 +122,14 @@ unsigned char max_concurr_spinup;
module_param(max_concurr_spinup, byte, 0);
MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
+uint cable_selection_override = CABLE_OVERRIDE_DISABLED;
+module_param(cable_selection_override, uint, 0);
+
+MODULE_PARM_DESC(cable_selection_override,
+ "This field indicates length of the SAS/SATA cable between "
+ "host and device. If any bits > 15 are set (default) "
+ "indicates \"use platform defaults\"");
+
static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
@@ -412,6 +420,14 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
return NULL;
isci_host->shost = shost;
+ dev_info(&pdev->dev, "%sSCU controller %d: phy 3-0 cables: "
+ "{%s, %s, %s, %s}\n",
+ (is_cable_select_overridden() ? "* " : ""), isci_host->id,
+ lookup_cable_names(decode_cable_selection(isci_host, 3)),
+ lookup_cable_names(decode_cable_selection(isci_host, 2)),
+ lookup_cable_names(decode_cable_selection(isci_host, 1)),
+ lookup_cable_names(decode_cable_selection(isci_host, 0)));
+
err = isci_host_init(isci_host);
if (err)
goto err_shost;
@@ -466,7 +482,8 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic
orom = isci_request_oprom(pdev);
for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) {
- if (sci_oem_parameters_validate(&orom->ctrl[i])) {
+ if (sci_oem_parameters_validate(&orom->ctrl[i],
+ orom->hdr.version)) {
dev_warn(&pdev->dev,
"[%d]: invalid oem parameters detected, falling back to firmware\n", i);
devm_kfree(&pdev->dev, orom);
diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h
index 8efeb6b0832..234ab46fce3 100644
--- a/drivers/scsi/isci/isci.h
+++ b/drivers/scsi/isci/isci.h
@@ -480,6 +480,7 @@ extern u16 ssp_inactive_to;
extern u16 stp_inactive_to;
extern unsigned char phy_gen;
extern unsigned char max_concurr_spinup;
+extern uint cable_selection_override;
irqreturn_t isci_msix_isr(int vec, void *data);
irqreturn_t isci_intx_isr(int vec, void *data);
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 35f50c2183e..fe18acfd6eb 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -91,22 +91,23 @@ sci_phy_transport_layer_initialization(struct isci_phy *iphy,
static enum sci_status
sci_phy_link_layer_initialization(struct isci_phy *iphy,
- struct scu_link_layer_registers __iomem *reg)
+ struct scu_link_layer_registers __iomem *llr)
{
struct isci_host *ihost = iphy->owning_port->owning_controller;
+ struct sci_phy_user_params *phy_user;
+ struct sci_phy_oem_params *phy_oem;
int phy_idx = iphy->phy_index;
- struct sci_phy_user_params *phy_user = &ihost->user_parameters.phys[phy_idx];
- struct sci_phy_oem_params *phy_oem =
- &ihost->oem_parameters.phys[phy_idx];
- u32 phy_configuration;
struct sci_phy_cap phy_cap;
+ u32 phy_configuration;
u32 parity_check = 0;
u32 parity_count = 0;
u32 llctl, link_rate;
u32 clksm_value = 0;
u32 sp_timeouts = 0;
- iphy->link_layer_registers = reg;
+ phy_user = &ihost->user_parameters.phys[phy_idx];
+ phy_oem = &ihost->oem_parameters.phys[phy_idx];
+ iphy->link_layer_registers = llr;
/* Set our IDENTIFY frame data */
#define SCI_END_DEVICE 0x01
@@ -116,32 +117,26 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) |
SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) |
SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE),
- &iphy->link_layer_registers->transmit_identification);
+ &llr->transmit_identification);
/* Write the device SAS Address */
- writel(0xFEDCBA98,
- &iphy->link_layer_registers->sas_device_name_high);
- writel(phy_idx, &iphy->link_layer_registers->sas_device_name_low);
+ writel(0xFEDCBA98, &llr->sas_device_name_high);
+ writel(phy_idx, &llr->sas_device_name_low);
/* Write the source SAS Address */
- writel(phy_oem->sas_address.high,
- &iphy->link_layer_registers->source_sas_address_high);
- writel(phy_oem->sas_address.low,
- &iphy->link_layer_registers->source_sas_address_low);
+ writel(phy_oem->sas_address.high, &llr->source_sas_address_high);
+ writel(phy_oem->sas_address.low, &llr->source_sas_address_low);
/* Clear and Set the PHY Identifier */
- writel(0, &iphy->link_layer_registers->identify_frame_phy_id);
- writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx),
- &iphy->link_layer_registers->identify_frame_phy_id);
+ writel(0, &llr->identify_frame_phy_id);
+ writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), &llr->identify_frame_phy_id);
/* Change the initial state of the phy configuration register */
- phy_configuration =
- readl(&iphy->link_layer_registers->phy_configuration);
+ phy_configuration = readl(&llr->phy_configuration);
/* Hold OOB state machine in reset */
phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET);
- writel(phy_configuration,
- &iphy->link_layer_registers->phy_configuration);
+ writel(phy_configuration, &llr->phy_configuration);
/* Configure the SNW capabilities */
phy_cap.all = 0;
@@ -149,15 +144,64 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
phy_cap.gen3_no_ssc = 1;
phy_cap.gen2_no_ssc = 1;
phy_cap.gen1_no_ssc = 1;
- if (ihost->oem_parameters.controller.do_enable_ssc == true) {
+ if (ihost->oem_parameters.controller.do_enable_ssc) {
+ struct scu_afe_registers __iomem *afe = &ihost->scu_registers->afe;
+ struct scu_afe_transceiver *xcvr = &afe->scu_afe_xcvr[phy_idx];
+ struct isci_pci_info *pci_info = to_pci_info(ihost->pdev);
+ bool en_sas = false;
+ bool en_sata = false;
+ u32 sas_type = 0;
+ u32 sata_spread = 0x2;
+ u32 sas_spread = 0x2;
+
phy_cap.gen3_ssc = 1;
phy_cap.gen2_ssc = 1;
phy_cap.gen1_ssc = 1;
+
+ if (pci_info->orom->hdr.version < ISCI_ROM_VER_1_1)
+ en_sas = en_sata = true;
+ else {
+ sata_spread = ihost->oem_parameters.controller.ssc_sata_tx_spread_level;
+ sas_spread = ihost->oem_parameters.controller.ssc_sas_tx_spread_level;
+
+ if (sata_spread)
+ en_sata = true;
+
+ if (sas_spread) {
+ en_sas = true;
+ sas_type = ihost->oem_parameters.controller.ssc_sas_tx_type;
+ }
+
+ }
+
+ if (en_sas) {
+ u32 reg;
+
+ reg = readl(&xcvr->afe_xcvr_control0);
+ reg |= (0x00100000 | (sas_type << 19));
+ writel(reg, &xcvr->afe_xcvr_control0);
+
+ reg = readl(&xcvr->afe_tx_ssc_control);
+ reg |= sas_spread << 8;
+ writel(reg, &xcvr->afe_tx_ssc_control);
+ }
+
+ if (en_sata) {
+ u32 reg;
+
+ reg = readl(&xcvr->afe_tx_ssc_control);
+ reg |= sata_spread;
+ writel(reg, &xcvr->afe_tx_ssc_control);
+
+ reg = readl(&llr->stp_control);
+ reg |= 1 << 12;
+ writel(reg, &llr->stp_control);
+ }
}
- /*
- * The SAS specification indicates that the phy_capabilities that
- * are transmitted shall have an even parity. Calculate the parity. */
+ /* The SAS specification indicates that the phy_capabilities that
+ * are transmitted shall have an even parity. Calculate the parity.
+ */
parity_check = phy_cap.all;
while (parity_check != 0) {
if (parity_check & 0x1)
@@ -165,20 +209,20 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
parity_check >>= 1;
}
- /*
- * If parity indicates there are an odd number of bits set, then
- * set the parity bit to 1 in the phy capabilities. */
+ /* If parity indicates there are an odd number of bits set, then
+ * set the parity bit to 1 in the phy capabilities.
+ */
if ((parity_count % 2) != 0)
phy_cap.parity = 1;
- writel(phy_cap.all, &iphy->link_layer_registers->phy_capabilities);
+ writel(phy_cap.all, &llr->phy_capabilities);
/* Set the enable spinup period but disable the ability to send
* notify enable spinup
*/
writel(SCU_ENSPINUP_GEN_VAL(COUNT,
phy_user->notify_enable_spin_up_insertion_frequency),
- &iphy->link_layer_registers->notify_enable_spinup_control);
+ &llr->notify_enable_spinup_control);
/* Write the ALIGN Insertion Ferequency for connected phy and
* inpendent of connected state
@@ -189,11 +233,13 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL,
phy_user->align_insertion_frequency);
- writel(clksm_value, &iphy->link_layer_registers->clock_skew_management);
+ writel(clksm_value, &llr->clock_skew_management);
- /* @todo Provide a way to write this register correctly */
- writel(0x02108421,
- &iphy->link_layer_registers->afe_lookup_table_control);
+ if (is_c0(ihost->pdev) || is_c1(ihost->pdev)) {
+ writel(0x04210400, &llr->afe_lookup_table_control);
+ writel(0x020A7C05, &llr->sas_primitive_timeout);
+ } else
+ writel(0x02108421, &llr->afe_lookup_table_control);
llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT,
(u8)ihost->user_parameters.no_outbound_task_timeout);
@@ -210,9 +256,9 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
break;
}
llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
- writel(llctl, &iphy->link_layer_registers->link_layer_control);
+ writel(llctl, &llr->link_layer_control);
- sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts);
+ sp_timeouts = readl(&llr->sas_phy_timeouts);
/* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */
sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF);
@@ -222,20 +268,23 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy,
*/
sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B);
- writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts);
+ writel(sp_timeouts, &llr->sas_phy_timeouts);
if (is_a2(ihost->pdev)) {
- /* Program the max ARB time for the PHY to 700us so we inter-operate with
- * the PMC expander which shuts down PHYs if the expander PHY generates too
- * many breaks. This time value will guarantee that the initiator PHY will
- * generate the break.
+ /* Program the max ARB time for the PHY to 700us so we
+ * inter-operate with the PMC expander which shuts down
+ * PHYs if the expander PHY generates too many breaks.
+ * This time value will guarantee that the initiator PHY
+ * will generate the break.
*/
writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME,
- &iphy->link_layer_registers->maximum_arbitration_wait_timer_timeout);
+ &llr->maximum_arbitration_wait_timer_timeout);
}
- /* Disable link layer hang detection, rely on the OS timeout for I/O timeouts. */
- writel(0, &iphy->link_layer_registers->link_layer_hang_detection_timeout);
+ /* Disable link layer hang detection, rely on the OS timeout for
+ * I/O timeouts.
+ */
+ writel(0, &llr->link_layer_hang_detection_timeout);
/* We can exit the initial state to the stopped state */
sci_change_state(&iphy->sm, SCI_PHY_STOPPED);
@@ -1049,24 +1098,25 @@ static void scu_link_layer_stop_protocol_engine(
writel(enable_spinup_value, &iphy->link_layer_registers->notify_enable_spinup_control);
}
-/**
- *
- *
- * This method will start the OOB/SN state machine for this struct isci_phy object.
- */
-static void scu_link_layer_start_oob(
- struct isci_phy *iphy)
+static void scu_link_layer_start_oob(struct isci_phy *iphy)
{
- u32 scu_sas_pcfg_value;
-
- scu_sas_pcfg_value =
- readl(&iphy->link_layer_registers->phy_configuration);
- scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
- scu_sas_pcfg_value &=
- ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
- SCU_SAS_PCFG_GEN_BIT(HARD_RESET));
- writel(scu_sas_pcfg_value,
- &iphy->link_layer_registers->phy_configuration);
+ struct scu_link_layer_registers __iomem *ll = iphy->link_layer_registers;
+ u32 val;
+
+ /** Reset OOB sequence - start */
+ val = readl(&ll->phy_configuration);
+ val &= ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) |
+ SCU_SAS_PCFG_GEN_BIT(HARD_RESET));
+ writel(val, &ll->phy_configuration);
+ readl(&ll->phy_configuration); /* flush */
+ /** Reset OOB sequence - end */
+
+ /** Start OOB sequence - start */
+ val = readl(&ll->phy_configuration);
+ val |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE);
+ writel(val, &ll->phy_configuration);
+ readl(&ll->phy_configuration); /* flush */
+ /** Start OOB sequence - end */
}
/**
diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index ac7f27749f9..7c6ac58a5c4 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -114,7 +114,7 @@ static u32 sci_port_get_phys(struct isci_port *iport)
* value is returned if the specified port is not valid. When this value is
* returned, no data is copied to the properties output parameter.
*/
-static enum sci_status sci_port_get_properties(struct isci_port *iport,
+enum sci_status sci_port_get_properties(struct isci_port *iport,
struct sci_port_properties *prop)
{
if (!iport || iport->logical_port_index == SCIC_SDS_DUMMY_PORT)
@@ -647,19 +647,26 @@ void sci_port_setup_transports(struct isci_port *iport, u32 device_id)
}
}
-static void sci_port_activate_phy(struct isci_port *iport, struct isci_phy *iphy,
- bool do_notify_user)
+static void sci_port_resume_phy(struct isci_port *iport, struct isci_phy *iphy)
+{
+ sci_phy_resume(iphy);
+ iport->enabled_phy_mask |= 1 << iphy->phy_index;
+}
+
+static void sci_port_activate_phy(struct isci_port *iport,
+ struct isci_phy *iphy,
+ u8 flags)
{
struct isci_host *ihost = iport->owning_controller;
- if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA)
+ if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA && (flags & PF_RESUME))
sci_phy_resume(iphy);
iport->active_phy_mask |= 1 << iphy->phy_index;
sci_controller_clear_invalid_phy(ihost, iphy);
- if (do_notify_user == true)
+ if (flags & PF_NOTIFY)
isci_port_link_up(ihost, iport, iphy);
}
@@ -669,14 +676,19 @@ void sci_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy,
struct isci_host *ihost = iport->owning_controller;
iport->active_phy_mask &= ~(1 << iphy->phy_index);
+ iport->enabled_phy_mask &= ~(1 << iphy->phy_index);
if (!iport->active_phy_mask)
iport->last_active_phy = iphy->phy_index;
iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
- /* Re-assign the phy back to the LP as if it were a narrow port */
- writel(iphy->phy_index,
- &iport->port_pe_configuration_register[iphy->phy_index]);
+ /* Re-assign the phy back to the LP as if it were a narrow port for APC
+ * mode. For MPC mode, the phy will remain in the port.
+ */
+ if (iport->owning_controller->oem_parameters.controller.mode_type ==
+ SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE)
+ writel(iphy->phy_index,
+ &iport->port_pe_configuration_register[iphy->phy_index]);
if (do_notify_user == true)
isci_port_link_down(ihost, iphy, iport);
@@ -701,18 +713,16 @@ static void sci_port_invalid_link_up(struct isci_port *iport, struct isci_phy *i
* sci_port_general_link_up_handler - phy can be assigned to port?
* @sci_port: sci_port object for which has a phy that has gone link up.
* @sci_phy: This is the struct isci_phy object that has gone link up.
- * @do_notify_user: This parameter specifies whether to inform the user (via
- * sci_port_link_up()) as to the fact that a new phy as become ready.
+ * @flags: PF_RESUME, PF_NOTIFY to sci_port_activate_phy
*
- * Determine if this phy can be assigned to this
- * port . If the phy is not a valid PHY for
- * this port then the function will notify the user. A PHY can only be
- * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in
- * the same port. none
+ * Determine if this phy can be assigned to this port . If the phy is
+ * not a valid PHY for this port then the function will notify the user.
+ * A PHY can only be part of a port if it's attached SAS ADDRESS is the
+ * same as all other PHYs in the same port.
*/
static void sci_port_general_link_up_handler(struct isci_port *iport,
- struct isci_phy *iphy,
- bool do_notify_user)
+ struct isci_phy *iphy,
+ u8 flags)
{
struct sci_sas_address port_sas_address;
struct sci_sas_address phy_sas_address;
@@ -730,7 +740,7 @@ static void sci_port_general_link_up_handler(struct isci_port *iport,
iport->active_phy_mask == 0) {
struct sci_base_state_machine *sm = &iport->sm;
- sci_port_activate_phy(iport, iphy, do_notify_user);
+ sci_port_activate_phy(iport, iphy, flags);
if (sm->current_state_id == SCI_PORT_RESETTING)
port_state_machine_change(iport, SCI_PORT_READY);
} else
@@ -781,11 +791,16 @@ bool sci_port_link_detected(
struct isci_phy *iphy)
{
if ((iport->logical_port_index != SCIC_SDS_DUMMY_PORT) &&
- (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) &&
- sci_port_is_wide(iport)) {
- sci_port_invalid_link_up(iport, iphy);
-
- return false;
+ (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA)) {
+ if (sci_port_is_wide(iport)) {
+ sci_port_invalid_link_up(iport, iphy);
+ return false;
+ } else {
+ struct isci_host *ihost = iport->owning_controller;
+ struct isci_port *dst_port = &(ihost->ports[iphy->phy_index]);
+ writel(iphy->phy_index,
+ &dst_port->port_pe_configuration_register[iphy->phy_index]);
+ }
}
return true;
@@ -975,6 +990,13 @@ static void sci_port_ready_substate_waiting_enter(struct sci_base_state_machine
}
}
+static void scic_sds_port_ready_substate_waiting_exit(
+ struct sci_base_state_machine *sm)
+{
+ struct isci_port *iport = container_of(sm, typeof(*iport), sm);
+ sci_port_resume_port_task_scheduler(iport);
+}
+
static void sci_port_ready_substate_operational_enter(struct sci_base_state_machine *sm)
{
u32 index;
@@ -988,13 +1010,13 @@ static void sci_port_ready_substate_operational_enter(struct sci_base_state_mach
writel(iport->physical_port_index,
&iport->port_pe_configuration_register[
iport->phy_table[index]->phy_index]);
+ if (((iport->active_phy_mask^iport->enabled_phy_mask) & (1 << index)) != 0)
+ sci_port_resume_phy(iport, iport->phy_table[index]);
}
}
sci_port_update_viit_entry(iport);
- sci_port_resume_port_task_scheduler(iport);
-
/*
* Post the dummy task for the port so the hardware can schedule
* io correctly
@@ -1061,20 +1083,9 @@ static void sci_port_ready_substate_configuring_enter(struct sci_base_state_mach
if (iport->active_phy_mask == 0) {
isci_port_not_ready(ihost, iport);
- port_state_machine_change(iport,
- SCI_PORT_SUB_WAITING);
- } else if (iport->started_request_count == 0)
- port_state_machine_change(iport,
- SCI_PORT_SUB_OPERATIONAL);
-}
-
-static void sci_port_ready_substate_configuring_exit(struct sci_base_state_machine *sm)
-{
- struct isci_port *iport = container_of(sm, typeof(*iport), sm);
-
- sci_port_suspend_port_task_scheduler(iport);
- if (iport->ready_exit)
- sci_port_invalidate_dummy_remote_node(iport);
+ port_state_machine_change(iport, SCI_PORT_SUB_WAITING);
+ } else
+ port_state_machine_change(iport, SCI_PORT_SUB_OPERATIONAL);
}
enum sci_status sci_port_start(struct isci_port *iport)
@@ -1252,7 +1263,7 @@ enum sci_status sci_port_add_phy(struct isci_port *iport,
if (status != SCI_SUCCESS)
return status;
- sci_port_general_link_up_handler(iport, iphy, true);
+ sci_port_general_link_up_handler(iport, iphy, PF_NOTIFY|PF_RESUME);
iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING);
@@ -1262,7 +1273,7 @@ enum sci_status sci_port_add_phy(struct isci_port *iport,
if (status != SCI_SUCCESS)
return status;
- sci_port_general_link_up_handler(iport, iphy, true);
+ sci_port_general_link_up_handler(iport, iphy, PF_NOTIFY);
/* Re-enter the configuring state since this may be the last phy in
* the port.
@@ -1338,13 +1349,13 @@ enum sci_status sci_port_link_up(struct isci_port *iport,
/* Since this is the first phy going link up for the port we
* can just enable it and continue
*/
- sci_port_activate_phy(iport, iphy, true);
+ sci_port_activate_phy(iport, iphy, PF_NOTIFY|PF_RESUME);
port_state_machine_change(iport,
SCI_PORT_SUB_OPERATIONAL);
return SCI_SUCCESS;
case SCI_PORT_SUB_OPERATIONAL:
- sci_port_general_link_up_handler(iport, iphy, true);
+ sci_port_general_link_up_handler(iport, iphy, PF_NOTIFY|PF_RESUME);
return SCI_SUCCESS;
case SCI_PORT_RESETTING:
/* TODO We should make sure that the phy that has gone
@@ -1361,7 +1372,7 @@ enum sci_status sci_port_link_up(struct isci_port *iport,
/* In the resetting state we don't notify the user regarding
* link up and link down notifications.
*/
- sci_port_general_link_up_handler(iport, iphy, false);
+ sci_port_general_link_up_handler(iport, iphy, PF_RESUME);
return SCI_SUCCESS;
default:
dev_warn(sciport_to_dev(iport),
@@ -1584,14 +1595,14 @@ static const struct sci_base_state sci_port_state_table[] = {
},
[SCI_PORT_SUB_WAITING] = {
.enter_state = sci_port_ready_substate_waiting_enter,
+ .exit_state = scic_sds_port_ready_substate_waiting_exit,
},
[SCI_PORT_SUB_OPERATIONAL] = {
.enter_state = sci_port_ready_substate_operational_enter,
.exit_state = sci_port_ready_substate_operational_exit
},
[SCI_PORT_SUB_CONFIGURING] = {
- .enter_state = sci_port_ready_substate_configuring_enter,
- .exit_state = sci_port_ready_substate_configuring_exit
+ .enter_state = sci_port_ready_substate_configuring_enter
},
[SCI_PORT_RESETTING] = {
.exit_state = sci_port_resetting_state_exit
@@ -1609,6 +1620,7 @@ void sci_port_construct(struct isci_port *iport, u8 index,
iport->logical_port_index = SCIC_SDS_DUMMY_PORT;
iport->physical_port_index = index;
iport->active_phy_mask = 0;
+ iport->enabled_phy_mask = 0;
iport->last_active_phy = 0;
iport->ready_exit = false;
diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h
index cb5ffbc3860..08116090eb7 100644
--- a/drivers/scsi/isci/port.h
+++ b/drivers/scsi/isci/port.h
@@ -63,6 +63,9 @@
#define SCIC_SDS_DUMMY_PORT 0xFF
+#define PF_NOTIFY (1 << 0)
+#define PF_RESUME (1 << 1)
+
struct isci_phy;
struct isci_host;
@@ -83,6 +86,8 @@ enum isci_status {
* @logical_port_index: software port index
* @physical_port_index: hardware port index
* @active_phy_mask: identifies phy members
+ * @enabled_phy_mask: phy mask for the port
+ * that are already part of the port
* @reserved_tag:
* @reserved_rni: reserver for port task scheduler workaround
* @started_request_count: reference count for outstanding commands
@@ -104,6 +109,7 @@ struct isci_port {
u8 logical_port_index;
u8 physical_port_index;
u8 active_phy_mask;
+ u8 enabled_phy_mask;
u8 last_active_phy;
u16 reserved_rni;
u16 reserved_tag;
@@ -250,6 +256,10 @@ bool sci_port_link_detected(
struct isci_port *iport,
struct isci_phy *iphy);
+enum sci_status sci_port_get_properties(
+ struct isci_port *iport,
+ struct sci_port_properties *prop);
+
enum sci_status sci_port_link_up(struct isci_port *iport,
struct isci_phy *iphy);
enum sci_status sci_port_link_down(struct isci_port *iport,
diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c
index 38a99d28114..6d1e9544cbe 100644
--- a/drivers/scsi/isci/port_config.c
+++ b/drivers/scsi/isci/port_config.c
@@ -57,7 +57,7 @@
#define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10)
#define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10)
-#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (100)
+#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (250)
enum SCIC_SDS_APC_ACTIVITY {
SCIC_SDS_APC_SKIP_PHY,
@@ -466,6 +466,23 @@ sci_apc_agent_validate_phy_configuration(struct isci_host *ihost,
return sci_port_configuration_agent_validate_ports(ihost, port_agent);
}
+/*
+ * This routine will restart the automatic port configuration timeout
+ * timer for the next time period. This could be caused by either a link
+ * down event or a link up event where we can not yet tell to which a phy
+ * belongs.
+ */
+static void sci_apc_agent_start_timer(
+ struct sci_port_configuration_agent *port_agent,
+ u32 timeout)
+{
+ if (port_agent->timer_pending)
+ sci_del_timer(&port_agent->timer);
+
+ port_agent->timer_pending = true;
+ sci_mod_timer(&port_agent->timer, timeout);
+}
+
static void sci_apc_agent_configure_ports(struct isci_host *ihost,
struct sci_port_configuration_agent *port_agent,
struct isci_phy *iphy,
@@ -565,17 +582,8 @@ static void sci_apc_agent_configure_ports(struct isci_host *ihost,
break;
case SCIC_SDS_APC_START_TIMER:
- /*
- * This can occur for either a link down event, or a link
- * up event where we cannot yet tell the port to which a
- * phy belongs.
- */
- if (port_agent->timer_pending)
- sci_del_timer(&port_agent->timer);
-
- port_agent->timer_pending = true;
- sci_mod_timer(&port_agent->timer,
- SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION);
+ sci_apc_agent_start_timer(port_agent,
+ SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION);
break;
case SCIC_SDS_APC_SKIP_PHY:
@@ -607,7 +615,8 @@ static void sci_apc_agent_link_up(struct isci_host *ihost,
if (!iport) {
/* the phy is not the part of this port */
port_agent->phy_ready_mask |= 1 << phy_index;
- sci_apc_agent_configure_ports(ihost, port_agent, iphy, true);
+ sci_apc_agent_start_timer(port_agent,
+ SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION);
} else {
/* the phy is already the part of the port */
u32 port_state = iport->sm.current_state_id;
diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c
index b5f4341de24..9b8117b9d75 100644
--- a/drivers/scsi/isci/probe_roms.c
+++ b/drivers/scsi/isci/probe_roms.c
@@ -147,7 +147,7 @@ struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmw
memcpy(orom, fw->data, fw->size);
- if (is_c0(pdev))
+ if (is_c0(pdev) || is_c1(pdev))
goto out;
/*
diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h
index 2c75248ca32..bb0e9d4d97c 100644
--- a/drivers/scsi/isci/probe_roms.h
+++ b/drivers/scsi/isci/probe_roms.h
@@ -152,7 +152,7 @@ struct sci_user_parameters {
#define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4
struct sci_oem_params;
-int sci_oem_parameters_validate(struct sci_oem_params *oem);
+int sci_oem_parameters_validate(struct sci_oem_params *oem, u8 version);
struct isci_orom;
struct isci_orom *isci_request_oprom(struct pci_dev *pdev);
@@ -191,6 +191,11 @@ struct isci_oem_hdr {
0x1a, 0x04, 0xc6)
#define ISCI_EFI_VAR_NAME "RstScuO"
+#define ISCI_ROM_VER_1_0 0x10
+#define ISCI_ROM_VER_1_1 0x11
+#define ISCI_ROM_VER_1_3 0x13
+#define ISCI_ROM_VER_LATEST ISCI_ROM_VER_1_3
+
/* Allowed PORT configuration modes APC Automatic PORT configuration mode is
* defined by the OEM configuration parameters providing no PHY_MASK parameters
* for any PORT. i.e. There are no phys assigned to any of the ports at start.
@@ -220,8 +225,86 @@ struct sci_oem_params {
struct {
uint8_t mode_type;
uint8_t max_concurr_spin_up;
- uint8_t do_enable_ssc;
- uint8_t reserved;
+ /*
+ * This bitfield indicates the OEM's desired default Tx
+ * Spread Spectrum Clocking (SSC) settings for SATA and SAS.
+ * NOTE: Default SSC Modulation Frequency is 31.5KHz.
+ */
+ union {
+ struct {
+ /*
+ * NOTE: Max spread for SATA is +0 / -5000 PPM.
+ * Down-spreading SSC (only method allowed for SATA):
+ * SATA SSC Tx Disabled = 0x0
+ * SATA SSC Tx at +0 / -1419 PPM Spread = 0x2
+ * SATA SSC Tx at +0 / -2129 PPM Spread = 0x3
+ * SATA SSC Tx at +0 / -4257 PPM Spread = 0x6
+ * SATA SSC Tx at +0 / -4967 PPM Spread = 0x7
+ */
+ uint8_t ssc_sata_tx_spread_level:4;
+ /*
+ * SAS SSC Tx Disabled = 0x0
+ *
+ * NOTE: Max spread for SAS down-spreading +0 /
+ * -2300 PPM
+ * Down-spreading SSC:
+ * SAS SSC Tx at +0 / -1419 PPM Spread = 0x2
+ * SAS SSC Tx at +0 / -2129 PPM Spread = 0x3
+ *
+ * NOTE: Max spread for SAS center-spreading +2300 /
+ * -2300 PPM
+ * Center-spreading SSC:
+ * SAS SSC Tx at +1064 / -1064 PPM Spread = 0x3
+ * SAS SSC Tx at +2129 / -2129 PPM Spread = 0x6
+ */
+ uint8_t ssc_sas_tx_spread_level:3;
+ /*
+ * NOTE: Refer to the SSC section of the SAS 2.x
+ * Specification for proper setting of this field.
+ * For standard SAS Initiator SAS PHY operation it
+ * should be 0 for Down-spreading.
+ * SAS SSC Tx spread type:
+ * Down-spreading SSC = 0
+ * Center-spreading SSC = 1
+ */
+ uint8_t ssc_sas_tx_type:1;
+ };
+ uint8_t do_enable_ssc;
+ };
+ /*
+ * This field indicates length of the SAS/SATA cable between
+ * host and device.
+ * This field is used make relationship between analog
+ * parameters of the phy in the silicon and length of the cable.
+ * Supported cable attenuation levels:
+ * "short"- up to 3m, "medium"-3m to 6m, and "long"- more than
+ * 6m.
+ *
+ * This is bit mask field:
+ *
+ * BIT: (MSB) 7 6 5 4
+ * ASSIGNMENT: <phy3><phy2><phy1><phy0> - Medium cable
+ * length assignment
+ * BIT: 3 2 1 0 (LSB)
+ * ASSIGNMENT: <phy3><phy2><phy1><phy0> - Long cable length
+ * assignment
+ *
+ * BITS 7-4 are set when the cable length is assigned to medium
+ * BITS 3-0 are set when the cable length is assigned to long
+ *
+ * The BIT positions are clear when the cable length is
+ * assigned to short.
+ *
+ * Setting the bits for both long and medium cable length is
+ * undefined.
+ *
+ * A value of 0x84 would assign
+ * phy3 - medium
+ * phy2 - long
+ * phy1 - short
+ * phy0 - short
+ */
+ uint8_t cable_selection_mask;
} controller;
struct {
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index b207cd3b15a..dd74b6ceeb8 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -53,6 +53,7 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <scsi/sas.h>
+#include <linux/bitops.h>
#include "isci.h"
#include "port.h"
#include "remote_device.h"
@@ -1101,6 +1102,7 @@ static enum sci_status sci_remote_device_da_construct(struct isci_port *iport,
struct isci_remote_device *idev)
{
enum sci_status status;
+ struct sci_port_properties properties;
struct domain_device *dev = idev->domain_dev;
sci_remote_device_construct(iport, idev);
@@ -1110,6 +1112,11 @@ static enum sci_status sci_remote_device_da_construct(struct isci_port *iport,
* entries will be needed to store the remote node.
*/
idev->is_direct_attached = true;
+
+ sci_port_get_properties(iport, &properties);
+ /* Get accurate port width from port's phy mask for a DA device. */
+ idev->device_port_width = hweight32(properties.phy_mask);
+
status = sci_controller_allocate_remote_node_context(iport->owning_controller,
idev,
&idev->rnc.remote_node_index);
@@ -1125,9 +1132,6 @@ static enum sci_status sci_remote_device_da_construct(struct isci_port *iport,
idev->connection_rate = sci_port_get_max_allowed_speed(iport);
- /* / @todo Should I assign the port width by reading all of the phys on the port? */
- idev->device_port_width = 1;
-
return SCI_SUCCESS;
}
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 66ad3dc8949..f5a3f7d2bda 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -496,7 +496,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost,
}
}
- isci_print_tmf(tmf);
+ isci_print_tmf(ihost, tmf);
if (tmf->status == SCI_SUCCESS)
ret = TMF_RESP_FUNC_COMPLETE;
diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h
index bc78c0a41d5..1b27b3797c6 100644
--- a/drivers/scsi/isci/task.h
+++ b/drivers/scsi/isci/task.h
@@ -106,7 +106,6 @@ struct isci_tmf {
} resp;
unsigned char lun[8];
u16 io_tag;
- struct isci_remote_device *device;
enum isci_tmf_function_codes tmf_code;
int status;
@@ -120,10 +119,10 @@ struct isci_tmf {
};
-static inline void isci_print_tmf(struct isci_tmf *tmf)
+static inline void isci_print_tmf(struct isci_host *ihost, struct isci_tmf *tmf)
{
if (SAS_PROTOCOL_SATA == tmf->proto)
- dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev,
+ dev_dbg(&ihost->pdev->dev,
"%s: status = %x\n"
"tmf->resp.d2h_fis.status = %x\n"
"tmf->resp.d2h_fis.error = %x\n",
@@ -132,7 +131,7 @@ static inline void isci_print_tmf(struct isci_tmf *tmf)
tmf->resp.d2h_fis.status,
tmf->resp.d2h_fis.error);
else
- dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev,
+ dev_dbg(&ihost->pdev->dev,
"%s: status = %x\n"
"tmf->resp.resp_iu.data_present = %x\n"
"tmf->resp.resp_iu.status = %x\n"
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 13:58:25 +0000