summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/libata-core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/libata-core.c')
-rw-r--r--drivers/scsi/libata-core.c1337
1 files changed, 840 insertions, 497 deletions
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index d92273cbe0d..665ae79e1fd 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -48,9 +48,11 @@
#include <linux/completion.h>
#include <linux/suspend.h>
#include <linux/workqueue.h>
+#include <linux/jiffies.h>
+#include <linux/scatterlist.h>
#include <scsi/scsi.h>
-#include "scsi.h"
#include "scsi_priv.h"
+#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/io.h>
@@ -62,14 +64,15 @@
static unsigned int ata_busy_sleep (struct ata_port *ap,
unsigned long tmout_pat,
unsigned long tmout);
+static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev);
+static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev);
static void ata_set_mode(struct ata_port *ap);
static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev);
-static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift);
+static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift);
static int fgb(u32 bitmap);
-static int ata_choose_xfer_mode(struct ata_port *ap,
+static int ata_choose_xfer_mode(const struct ata_port *ap,
u8 *xfer_mode_out,
unsigned int *xfer_shift_out);
-static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat);
static void __ata_qc_complete(struct ata_queued_cmd *qc);
static unsigned int ata_unique_id = 1;
@@ -85,7 +88,7 @@ MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
/**
- * ata_tf_load - send taskfile registers to host controller
+ * ata_tf_load_pio - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
@@ -95,7 +98,7 @@ MODULE_VERSION(DRV_VERSION);
* Inherited from caller.
*/
-static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -153,7 +156,7 @@ static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf)
* Inherited from caller.
*/
-static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -222,7 +225,7 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
* LOCKING:
* Inherited from caller.
*/
-void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
ata_tf_load_mmio(ap, tf);
@@ -242,7 +245,7 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
* spin_lock_irqsave(host_set lock)
*/
-static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf)
{
DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
@@ -263,7 +266,7 @@ static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf)
* spin_lock_irqsave(host_set lock)
*/
-static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
@@ -283,7 +286,7 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
ata_exec_command_mmio(ap, tf);
@@ -292,28 +295,6 @@ void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
}
/**
- * ata_exec - issue ATA command to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Issues PIO/MMIO write to ATA command register, with proper
- * synchronization with interrupt handler / other threads.
- *
- * LOCKING:
- * Obtains host_set lock.
- */
-
-static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf)
-{
- unsigned long flags;
-
- DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
- spin_lock_irqsave(&ap->host_set->lock, flags);
- ap->ops->exec_command(ap, tf);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-}
-
-/**
* ata_tf_to_host - issue ATA taskfile to host controller
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
@@ -323,30 +304,11 @@ static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf)
* other threads.
*
* LOCKING:
- * Obtains host_set lock.
- */
-
-static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf)
-{
- ap->ops->tf_load(ap, tf);
-
- ata_exec(ap, tf);
-}
-
-/**
- * ata_tf_to_host_nolock - issue ATA taskfile to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Issues ATA taskfile register set to ATA host controller,
- * with proper synchronization with interrupt handler and
- * other threads.
- *
- * LOCKING:
* spin_lock_irqsave(host_set lock)
*/
-void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf)
+static inline void ata_tf_to_host(struct ata_port *ap,
+ const struct ata_taskfile *tf)
{
ap->ops->tf_load(ap, tf);
ap->ops->exec_command(ap, tf);
@@ -368,6 +330,8 @@ static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
+ tf->command = ata_check_status(ap);
+ tf->feature = inb(ioaddr->error_addr);
tf->nsect = inb(ioaddr->nsect_addr);
tf->lbal = inb(ioaddr->lbal_addr);
tf->lbam = inb(ioaddr->lbam_addr);
@@ -400,6 +364,8 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
+ tf->command = ata_check_status(ap);
+ tf->feature = readb((void __iomem *)ioaddr->error_addr);
tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
@@ -520,30 +486,6 @@ u8 ata_altstatus(struct ata_port *ap)
/**
- * ata_chk_err - Read device error reg
- * @ap: port where the device is
- *
- * Reads ATA taskfile error register for
- * currently-selected device and return its value.
- *
- * Note: may NOT be used as the check_err() entry in
- * ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-u8 ata_chk_err(struct ata_port *ap)
-{
- if (ap->ops->check_err)
- return ap->ops->check_err(ap);
-
- if (ap->flags & ATA_FLAG_MMIO) {
- return readb((void __iomem *) ap->ioaddr.error_addr);
- }
- return inb(ap->ioaddr.error_addr);
-}
-
-/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
* @fis: Buffer into which data will output
@@ -556,7 +498,7 @@ u8 ata_chk_err(struct ata_port *ap)
* Inherited from caller.
*/
-void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp)
+void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp)
{
fis[0] = 0x27; /* Register - Host to Device FIS */
fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number,
@@ -590,14 +532,13 @@ void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp)
* @fis: Buffer from which data will be input
* @tf: Taskfile to output
*
- * Converts a standard ATA taskfile to a Serial ATA
- * FIS structure (Register - Host to Device).
+ * Converts a serial ATA FIS structure to a standard ATA taskfile.
*
* LOCKING:
* Inherited from caller.
*/
-void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf)
+void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
{
tf->command = fis[2]; /* status */
tf->feature = fis[3]; /* error */
@@ -615,79 +556,53 @@ void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf)
tf->hob_nsect = fis[13];
}
-/**
- * ata_prot_to_cmd - determine which read/write opcodes to use
- * @protocol: ATA_PROT_xxx taskfile protocol
- * @lba48: true is lba48 is present
- *
- * Given necessary input, determine which read/write commands
- * to use to transfer data.
- *
- * LOCKING:
- * None.
- */
-static int ata_prot_to_cmd(int protocol, int lba48)
-{
- int rcmd = 0, wcmd = 0;
-
- switch (protocol) {
- case ATA_PROT_PIO:
- if (lba48) {
- rcmd = ATA_CMD_PIO_READ_EXT;
- wcmd = ATA_CMD_PIO_WRITE_EXT;
- } else {
- rcmd = ATA_CMD_PIO_READ;
- wcmd = ATA_CMD_PIO_WRITE;
- }
- break;
-
- case ATA_PROT_DMA:
- if (lba48) {
- rcmd = ATA_CMD_READ_EXT;
- wcmd = ATA_CMD_WRITE_EXT;
- } else {
- rcmd = ATA_CMD_READ;
- wcmd = ATA_CMD_WRITE;
- }
- break;
-
- default:
- return -1;
- }
-
- return rcmd | (wcmd << 8);
-}
+static const u8 ata_rw_cmds[] = {
+ /* pio multi */
+ ATA_CMD_READ_MULTI,
+ ATA_CMD_WRITE_MULTI,
+ ATA_CMD_READ_MULTI_EXT,
+ ATA_CMD_WRITE_MULTI_EXT,
+ /* pio */
+ ATA_CMD_PIO_READ,
+ ATA_CMD_PIO_WRITE,
+ ATA_CMD_PIO_READ_EXT,
+ ATA_CMD_PIO_WRITE_EXT,
+ /* dma */
+ ATA_CMD_READ,
+ ATA_CMD_WRITE,
+ ATA_CMD_READ_EXT,
+ ATA_CMD_WRITE_EXT
+};
/**
- * ata_dev_set_protocol - set taskfile protocol and r/w commands
- * @dev: device to examine and configure
+ * ata_rwcmd_protocol - set taskfile r/w commands and protocol
+ * @qc: command to examine and configure
*
- * Examine the device configuration, after we have
- * read the identify-device page and configured the
- * data transfer mode. Set internal state related to
- * the ATA taskfile protocol (pio, pio mult, dma, etc.)
- * and calculate the proper read/write commands to use.
+ * Examine the device configuration and tf->flags to calculate
+ * the proper read/write commands and protocol to use.
*
* LOCKING:
* caller.
*/
-static void ata_dev_set_protocol(struct ata_device *dev)
+void ata_rwcmd_protocol(struct ata_queued_cmd *qc)
{
- int pio = (dev->flags & ATA_DFLAG_PIO);
- int lba48 = (dev->flags & ATA_DFLAG_LBA48);
- int proto, cmd;
+ struct ata_taskfile *tf = &qc->tf;
+ struct ata_device *dev = qc->dev;
- if (pio)
- proto = dev->xfer_protocol = ATA_PROT_PIO;
- else
- proto = dev->xfer_protocol = ATA_PROT_DMA;
+ int index, lba48, write;
+
+ lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
+ write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
- cmd = ata_prot_to_cmd(proto, lba48);
- if (cmd < 0)
- BUG();
+ if (dev->flags & ATA_DFLAG_PIO) {
+ tf->protocol = ATA_PROT_PIO;
+ index = dev->multi_count ? 0 : 4;
+ } else {
+ tf->protocol = ATA_PROT_DMA;
+ index = 8;
+ }
- dev->read_cmd = cmd & 0xff;
- dev->write_cmd = (cmd >> 8) & 0xff;
+ tf->command = ata_rw_cmds[index + lba48 + write];
}
static const char * xfer_mode_str[] = {
@@ -869,7 +784,7 @@ static unsigned int ata_devchk(struct ata_port *ap,
* the event of failure.
*/
-unsigned int ata_dev_classify(struct ata_taskfile *tf)
+unsigned int ata_dev_classify(const struct ata_taskfile *tf)
{
/* Apple's open source Darwin code hints that some devices only
* put a proper signature into the LBA mid/high registers,
@@ -921,8 +836,8 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device)
memset(&tf, 0, sizeof(tf));
- err = ata_chk_err(ap);
ap->ops->tf_read(ap, &tf);
+ err = tf.feature;
dev->class = ATA_DEV_NONE;
@@ -961,7 +876,7 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device)
* caller.
*/
-void ata_dev_id_string(u16 *id, unsigned char *s,
+void ata_dev_id_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len)
{
unsigned int c;
@@ -1078,7 +993,7 @@ void ata_dev_select(struct ata_port *ap, unsigned int device,
* caller.
*/
-static inline void ata_dump_id(struct ata_device *dev)
+static inline void ata_dump_id(const struct ata_device *dev)
{
DPRINTK("49==0x%04x "
"53==0x%04x "
@@ -1106,6 +1021,55 @@ static inline void ata_dump_id(struct ata_device *dev)
dev->id[93]);
}
+/*
+ * Compute the PIO modes available for this device. This is not as
+ * trivial as it seems if we must consider early devices correctly.
+ *
+ * FIXME: pre IDE drive timing (do we care ?).
+ */
+
+static unsigned int ata_pio_modes(const struct ata_device *adev)
+{
+ u16 modes;
+
+ /* Usual case. Word 53 indicates word 88 is valid */
+ if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) {
+ modes = adev->id[ATA_ID_PIO_MODES] & 0x03;
+ modes <<= 3;
+ modes |= 0x7;
+ return modes;
+ }
+
+ /* If word 88 isn't valid then Word 51 holds the PIO timing number
+ for the maximum. Turn it into a mask and return it */
+ modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ;
+ return modes;
+}
+
+static int ata_qc_wait_err(struct ata_queued_cmd *qc,
+ struct completion *wait)
+{
+ int rc = 0;
+
+ if (wait_for_completion_timeout(wait, 30 * HZ) < 1) {
+ /* timeout handling */
+ unsigned int err_mask = ac_err_mask(ata_chk_status(qc->ap));
+
+ if (!err_mask) {
+ printk(KERN_WARNING "ata%u: slow completion (cmd %x)\n",
+ qc->ap->id, qc->tf.command);
+ } else {
+ printk(KERN_WARNING "ata%u: qc timeout (cmd %x)\n",
+ qc->ap->id, qc->tf.command);
+ rc = -EIO;
+ }
+
+ ata_qc_complete(qc, err_mask);
+ }
+
+ return rc;
+}
+
/**
* ata_dev_identify - obtain IDENTIFY x DEVICE page
* @ap: port on which device we wish to probe resides
@@ -1131,10 +1095,9 @@ static inline void ata_dump_id(struct ata_device *dev)
static void ata_dev_identify(struct ata_port *ap, unsigned int device)
{
struct ata_device *dev = &ap->device[device];
- unsigned int i;
+ unsigned int major_version;
u16 tmp;
unsigned long xfer_modes;
- u8 status;
unsigned int using_edd;
DECLARE_COMPLETION(wait);
struct ata_queued_cmd *qc;
@@ -1186,10 +1149,13 @@ retry:
if (rc)
goto err_out;
else
- wait_for_completion(&wait);
+ ata_qc_wait_err(qc, &wait);
- status = ata_chk_status(ap);
- if (status & ATA_ERR) {
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->ops->tf_read(ap, &qc->tf);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (qc->tf.command & ATA_ERR) {
/*
* arg! EDD works for all test cases, but seems to return
* the ATA signature for some ATAPI devices. Until the
@@ -1201,8 +1167,8 @@ retry:
* ATA software reset (SRST, the default) does not appear
* to have this problem.
*/
- if ((using_edd) && (qc->tf.command == ATA_CMD_ID_ATA)) {
- u8 err = ata_chk_err(ap);
+ if ((using_edd) && (dev->class == ATA_DEV_ATA)) {
+ u8 err = qc->tf.feature;
if (err & ATA_ABORTED) {
dev->class = ATA_DEV_ATAPI;
qc->cursg = 0;
@@ -1229,9 +1195,9 @@ retry:
* common ATA, ATAPI feature tests
*/
- /* we require LBA and DMA support (bits 8 & 9 of word 49) */
- if (!ata_id_has_dma(dev->id) || !ata_id_has_lba(dev->id)) {
- printk(KERN_DEBUG "ata%u: no dma/lba\n", ap->id);
+ /* we require DMA support (bits 8 of word 49) */
+ if (!ata_id_has_dma(dev->id)) {
+ printk(KERN_DEBUG "ata%u: no dma\n", ap->id);
goto err_out_nosup;
}
@@ -1239,10 +1205,8 @@ retry:
xfer_modes = dev->id[ATA_ID_UDMA_MODES];
if (!xfer_modes)
xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA;
- if (!xfer_modes) {
- xfer_modes = (dev->id[ATA_ID_PIO_MODES]) << (ATA_SHIFT_PIO + 3);
- xfer_modes |= (0x7 << ATA_SHIFT_PIO);
- }
+ if (!xfer_modes)
+ xfer_modes = ata_pio_modes(dev);
ata_dump_id(dev);
@@ -1251,36 +1215,79 @@ retry:
if (!ata_id_is_ata(dev->id)) /* sanity check */
goto err_out_nosup;
+ /* get major version */
tmp = dev->id[ATA_ID_MAJOR_VER];
- for (i = 14; i >= 1; i--)
- if (tmp & (1 << i))
+ for (major_version = 14; major_version >= 1; major_version--)
+ if (tmp & (1 << major_version))
break;
- /* we require at least ATA-3 */
- if (i < 3) {
- printk(KERN_DEBUG "ata%u: no ATA-3\n", ap->id);
- goto err_out_nosup;
+ /*
+ * The exact sequence expected by certain pre-ATA4 drives is:
+ * SRST RESET
+ * IDENTIFY
+ * INITIALIZE DEVICE PARAMETERS
+ * anything else..
+ * Some drives were very specific about that exact sequence.
+ */
+ if (major_version < 4 || (!ata_id_has_lba(dev->id))) {
+ ata_dev_init_params(ap, dev);
+
+ /* current CHS translation info (id[53-58]) might be
+ * changed. reread the identify device info.
+ */
+ ata_dev_reread_id(ap, dev);
}
- if (ata_id_has_lba48(dev->id)) {
- dev->flags |= ATA_DFLAG_LBA48;
- dev->n_sectors = ata_id_u64(dev->id, 100);
- } else {
- dev->n_sectors = ata_id_u32(dev->id, 60);
+ if (ata_id_has_lba(dev->id)) {
+ dev->flags |= ATA_DFLAG_LBA;
+
+ if (ata_id_has_lba48(dev->id)) {
+ dev->flags |= ATA_DFLAG_LBA48;
+ dev->n_sectors = ata_id_u64(dev->id, 100);
+ } else {
+ dev->n_sectors = ata_id_u32(dev->id, 60);
+ }
+
+ /* print device info to dmesg */
+ printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n",
+ ap->id, device,
+ major_version,
+ ata_mode_string(xfer_modes),
+ (unsigned long long)dev->n_sectors,
+ dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA");
+ } else {
+ /* CHS */
+
+ /* Default translation */
+ dev->cylinders = dev->id[1];
+ dev->heads = dev->id[3];
+ dev->sectors = dev->id[6];
+ dev->n_sectors = dev->cylinders * dev->heads * dev->sectors;
+
+ if (ata_id_current_chs_valid(dev->id)) {
+ /* Current CHS translation is valid. */
+ dev->cylinders = dev->id[54];
+ dev->heads = dev->id[55];
+ dev->sectors = dev->id[56];
+
+ dev->n_sectors = ata_id_u32(dev->id, 57);
+ }
+
+ /* print device info to dmesg */
+ printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n",
+ ap->id, device,
+ major_version,
+ ata_mode_string(xfer_modes),
+ (unsigned long long)dev->n_sectors,
+ (int)dev->cylinders, (int)dev->heads, (int)dev->sectors);
+
}
ap->host->max_cmd_len = 16;
-
- /* print device info to dmesg */
- printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s\n",
- ap->id, device,
- ata_mode_string(xfer_modes),
- (unsigned long long)dev->n_sectors,
- dev->flags & ATA_DFLAG_LBA48 ? " lba48" : "");
}
/* ATAPI-specific feature tests */
- else {
+ else if (dev->class == ATA_DEV_ATAPI) {
if (ata_id_is_ata(dev->id)) /* sanity check */
goto err_out_nosup;
@@ -1310,7 +1317,7 @@ err_out:
}
-static inline u8 ata_dev_knobble(struct ata_port *ap)
+static inline u8 ata_dev_knobble(const struct ata_port *ap)
{
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id)));
}
@@ -1496,7 +1503,155 @@ void ata_port_disable(struct ata_port *ap)
ap->flags |= ATA_FLAG_PORT_DISABLED;
}
-static struct {
+/*
+ * This mode timing computation functionality is ported over from
+ * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
+ */
+/*
+ * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
+ * These were taken from ATA/ATAPI-6 standard, rev 0a, except
+ * for PIO 5, which is a nonstandard extension and UDMA6, which
+ * is currently supported only by Maxtor drives.
+ */
+
+static const struct ata_timing ata_timing[] = {
+
+ { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
+ { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
+ { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
+ { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
+
+ { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
+ { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
+ { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
+
+/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
+
+ { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
+ { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
+ { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
+
+ { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
+ { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
+ { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
+
+/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */
+ { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
+ { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
+
+ { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
+ { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
+ { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
+
+/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
+
+ { 0xFF }
+};
+
+#define ENOUGH(v,unit) (((v)-1)/(unit)+1)
+#define EZ(v,unit) ((v)?ENOUGH(v,unit):0)
+
+static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
+{
+ q->setup = EZ(t->setup * 1000, T);
+ q->act8b = EZ(t->act8b * 1000, T);
+ q->rec8b = EZ(t->rec8b * 1000, T);
+ q->cyc8b = EZ(t->cyc8b * 1000, T);
+ q->active = EZ(t->active * 1000, T);
+ q->recover = EZ(t->recover * 1000, T);
+ q->cycle = EZ(t->cycle * 1000, T);
+ q->udma = EZ(t->udma * 1000, UT);
+}
+
+void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
+ struct ata_timing *m, unsigned int what)
+{
+ if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup);
+ if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b);
+ if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b);
+ if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b);
+ if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active);
+ if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
+ if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle);
+ if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
+}
+
+static const struct ata_timing* ata_timing_find_mode(unsigned short speed)
+{
+ const struct ata_timing *t;
+
+ for (t = ata_timing; t->mode != speed; t++)
+ if (t->mode == 0xFF)
+ return NULL;
+ return t;
+}
+
+int ata_timing_compute(struct ata_device *adev, unsigned short speed,
+ struct ata_timing *t, int T, int UT)
+{
+ const struct ata_timing *s;
+ struct ata_timing p;
+
+ /*
+ * Find the mode.
+ */
+
+ if (!(s = ata_timing_find_mode(speed)))
+ return -EINVAL;
+
+ memcpy(t, s, sizeof(*s));
+
+ /*
+ * If the drive is an EIDE drive, it can tell us it needs extended
+ * PIO/MW_DMA cycle timing.
+ */
+
+ if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
+ memset(&p, 0, sizeof(p));
+ if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
+ if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO];
+ else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY];
+ } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) {
+ p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN];
+ }
+ ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
+ }
+
+ /*
+ * Convert the timing to bus clock counts.
+ */
+
+ ata_timing_quantize(t, t, T, UT);
+
+ /*
+ * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T
+ * and some other commands. We have to ensure that the DMA cycle timing is
+ * slower/equal than the fastest PIO timing.
+ */
+
+ if (speed > XFER_PIO_4) {
+ ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
+ ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
+ }
+
+ /*
+ * Lenghten active & recovery time so that cycle time is correct.
+ */
+
+ if (t->act8b + t->rec8b < t->cyc8b) {
+ t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
+ t->rec8b = t->cyc8b - t->act8b;
+ }
+
+ if (t->active + t->recover < t->cycle) {
+ t->active += (t->cycle - (t->active + t->recover)) / 2;
+ t->recover = t->cycle - t->active;
+ }
+
+ return 0;
+}
+
+static const struct {
unsigned int shift;
u8 base;
} xfer_mode_classes[] = {
@@ -1603,7 +1758,7 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode,
*/
static void ata_set_mode(struct ata_port *ap)
{
- unsigned int i, xfer_shift;
+ unsigned int xfer_shift;
u8 xfer_mode;
int rc;
@@ -1632,11 +1787,6 @@ static void ata_set_mode(struct ata_port *ap)
if (ap->ops->post_set_mode)
ap->ops->post_set_mode(ap);
- for (i = 0; i < 2; i++) {
- struct ata_device *dev = &ap->device[i];
- ata_dev_set_protocol(dev);
- }
-
return;
err_out:
@@ -1746,12 +1896,14 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask)
*
* LOCKING:
* PCI/etc. bus probe sem.
+ * Obtains host_set lock.
*
*/
static unsigned int ata_bus_edd(struct ata_port *ap)
{
struct ata_taskfile tf;
+ unsigned long flags;
/* set up execute-device-diag (bus reset) taskfile */
/* also, take interrupts to a known state (disabled) */
@@ -1762,7 +1914,9 @@ static unsigned int ata_bus_edd(struct ata_port *ap)
tf.protocol = ATA_PROT_NODATA;
/* do bus reset */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
ata_tf_to_host(ap, &tf);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
/* spec says at least 2ms. but who knows with those
* crazy ATAPI devices...
@@ -1910,7 +2064,8 @@ err_out:
DPRINTK("EXIT\n");
}
-static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev)
+static void ata_pr_blacklisted(const struct ata_port *ap,
+ const struct ata_device *dev)
{
printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n",
ap->id, dev->devno);
@@ -1948,7 +2103,7 @@ static const char * ata_dma_blacklist [] = {
"_NEC DV5800A",
};
-static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev)
+static int ata_dma_blacklisted(const struct ata_device *dev)
{
unsigned char model_num[40];
char *s;
@@ -1973,9 +2128,9 @@ static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev)
return 0;
}
-static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
+static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift)
{
- struct ata_device *master, *slave;
+ const struct ata_device *master, *slave;
unsigned int mask;
master = &ap->device[0];
@@ -1987,14 +2142,14 @@ static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
mask = ap->udma_mask;
if (ata_dev_present(master)) {
mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff);
- if (ata_dma_blacklisted(ap, master)) {
+ if (ata_dma_blacklisted(master)) {
mask = 0;
ata_pr_blacklisted(ap, master);
}
}
if (ata_dev_present(slave)) {
mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff);
- if (ata_dma_blacklisted(ap, slave)) {
+ if (ata_dma_blacklisted(slave)) {
mask = 0;
ata_pr_blacklisted(ap, slave);
}
@@ -2004,14 +2159,14 @@ static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
mask = ap->mwdma_mask;
if (ata_dev_present(master)) {
mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07);
- if (ata_dma_blacklisted(ap, master)) {
+ if (ata_dma_blacklisted(master)) {
mask = 0;
ata_pr_blacklisted(ap, master);
}
}
if (ata_dev_present(slave)) {
mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07);
- if (ata_dma_blacklisted(ap, slave)) {
+ if (ata_dma_blacklisted(slave)) {
mask = 0;
ata_pr_blacklisted(ap, slave);
}
@@ -2075,7 +2230,7 @@ static int fgb(u32 bitmap)
* Zero on success, negative on error.
*/
-static int ata_choose_xfer_mode(struct ata_port *ap,
+static int ata_choose_xfer_mode(const struct ata_port *ap,
u8 *xfer_mode_out,
unsigned int *xfer_shift_out)
{
@@ -2138,7 +2293,111 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
if (rc)
ata_port_disable(ap);
else
- wait_for_completion(&wait);
+ ata_qc_wait_err(qc, &wait);
+
+ DPRINTK("EXIT\n");
+}
+
+/**
+ * ata_dev_reread_id - Reread the device identify device info
+ * @ap: port where the device is
+ * @dev: device to reread the identify device info
+ *
+ * LOCKING:
+ */
+
+static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev)
+{
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int rc;
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ ata_sg_init_one(qc, dev->id, sizeof(dev->id));
+ qc->dma_dir = DMA_FROM_DEVICE;
+
+ if (dev->class == ATA_DEV_ATA) {
+ qc->tf.command = ATA_CMD_ID_ATA;
+ DPRINTK("do ATA identify\n");
+ } else {
+ qc->tf.command = ATA_CMD_ID_ATAPI;
+ DPRINTK("do ATAPI identify\n");
+ }
+
+ qc->tf.flags |= ATA_TFLAG_DEVICE;
+ qc->tf.protocol = ATA_PROT_PIO;
+ qc->nsect = 1;
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (rc)
+ goto err_out;
+
+ ata_qc_wait_err(qc, &wait);
+
+ swap_buf_le16(dev->id, ATA_ID_WORDS);
+
+ ata_dump_id(dev);
+
+ DPRINTK("EXIT\n");
+
+ return;
+err_out:
+ ata_port_disable(ap);
+}
+
+/**
+ * ata_dev_init_params - Issue INIT DEV PARAMS command
+ * @ap: Port associated with device @dev
+ * @dev: Device to which command will be sent
+ *
+ * LOCKING:
+ */
+
+static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev)
+{
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ int rc;
+ unsigned long flags;
+ u16 sectors = dev->id[6];
+ u16 heads = dev->id[3];
+
+ /* Number of sectors per track 1-255. Number of heads 1-16 */
+ if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
+ return;
+
+ /* set up init dev params taskfile */
+ DPRINTK("init dev params \n");
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ qc->tf.command = ATA_CMD_INIT_DEV_PARAMS;
+ qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ qc->tf.protocol = ATA_PROT_NODATA;
+ qc->tf.nsect = sectors;
+ qc->tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (rc)
+ ata_port_disable(ap);
+ else
+ ata_qc_wait_err(qc, &wait);
DPRINTK("EXIT\n");
}
@@ -2156,8 +2415,9 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
static void ata_sg_clean(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- struct scatterlist *sg = qc->sg;
+ struct scatterlist *sg = qc->__sg;
int dir = qc->dma_dir;
+ void *pad_buf = NULL;
assert(qc->flags & ATA_QCFLAG_DMAMAP);
assert(sg != NULL);
@@ -2165,16 +2425,40 @@ static void ata_sg_clean(struct ata_queued_cmd *qc)
if (qc->flags & ATA_QCFLAG_SINGLE)
assert(qc->n_elem == 1);
- DPRINTK("unmapping %u sg elements\n", qc->n_elem);
+ VPRINTK("unmapping %u sg elements\n", qc->n_elem);
- if (qc->flags & ATA_QCFLAG_SG)
- dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir);
- else
- dma_unmap_single(ap->host_set->dev, sg_dma_address(&sg[0]),
- sg_dma_len(&sg[0]), dir);
+ /* if we padded the buffer out to 32-bit bound, and data
+ * xfer direction is from-device, we must copy from the
+ * pad buffer back into the supplied buffer
+ */
+ if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE))
+ pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
+
+ if (qc->flags & ATA_QCFLAG_SG) {
+ if (qc->n_elem)
+ dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir);
+ /* restore last sg */
+ sg[qc->orig_n_elem - 1].length += qc->pad_len;
+ if (pad_buf) {
+ struct scatterlist *psg = &qc->pad_sgent;
+ void *addr = kmap_atomic(psg->page, KM_IRQ0);
+ memcpy(addr + psg->offset, pad_buf, qc->pad_len);
+ kunmap_atomic(psg->page, KM_IRQ0);
+ }
+ } else {
+ if (sg_dma_len(&sg[0]) > 0)
+ dma_unmap_single(ap->host_set->dev,
+ sg_dma_address(&sg[0]), sg_dma_len(&sg[0]),
+ dir);
+ /* restore sg */
+ sg->length += qc->pad_len;
+ if (pad_buf)
+ memcpy(qc->buf_virt + sg->length - qc->pad_len,
+ pad_buf, qc->pad_len);
+ }
qc->flags &= ~ATA_QCFLAG_DMAMAP;
- qc->sg = NULL;
+ qc->__sg = NULL;
}
/**
@@ -2190,15 +2474,15 @@ static void ata_sg_clean(struct ata_queued_cmd *qc)
*/
static void ata_fill_sg(struct ata_queued_cmd *qc)
{
- struct scatterlist *sg = qc->sg;
struct ata_port *ap = qc->ap;
- unsigned int idx, nelem;
+ struct scatterlist *sg;
+ unsigned int idx;
- assert(sg != NULL);
+ assert(qc->__sg != NULL);
assert(qc->n_elem > 0);
idx = 0;
- for (nelem = qc->n_elem; nelem; nelem--,sg++) {
+ ata_for_each_sg(sg, qc) {
u32 addr, offset;
u32 sg_len, len;
@@ -2289,14 +2573,13 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
qc->flags |= ATA_QCFLAG_SINGLE;
memset(&qc->sgent, 0, sizeof(qc->sgent));
- qc->sg = &qc->sgent;
+ qc->__sg = &qc->sgent;
qc->n_elem = 1;
+ qc->orig_n_elem = 1;
qc->buf_virt = buf;
- sg = qc->sg;
- sg->page = virt_to_page(buf);
- sg->offset = (unsigned long) buf & ~PAGE_MASK;
- sg->length = buflen;
+ sg = qc->__sg;
+ sg_init_one(sg, buf, buflen);
}
/**
@@ -2317,8 +2600,9 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem)
{
qc->flags |= ATA_QCFLAG_SG;
- qc->sg = sg;
+ qc->__sg = sg;
qc->n_elem = n_elem;
+ qc->orig_n_elem = n_elem;
}
/**
@@ -2338,15 +2622,47 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
int dir = qc->dma_dir;
- struct scatterlist *sg = qc->sg;
+ struct scatterlist *sg = qc->__sg;
dma_addr_t dma_address;
+ /* we must lengthen transfers to end on a 32-bit boundary */
+ qc->pad_len = sg->length & 3;
+ if (qc->pad_len) {
+ void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
+ struct scatterlist *psg = &qc->pad_sgent;
+
+ assert(qc->dev->class == ATA_DEV_ATAPI);
+
+ memset(pad_buf, 0, ATA_DMA_PAD_SZ);
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len,
+ qc->pad_len);
+
+ sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ);
+ sg_dma_len(psg) = ATA_DMA_PAD_SZ;
+ /* trim sg */
+ sg->length -= qc->pad_len;
+
+ DPRINTK("padding done, sg->length=%u pad_len=%u\n",
+ sg->length, qc->pad_len);
+ }
+
+ if (!sg->length) {
+ sg_dma_address(sg) = 0;
+ goto skip_map;
+ }
+
dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt,
sg->length, dir);
- if (dma_mapping_error(dma_address))
+ if (dma_mapping_error(dma_address)) {
+ /* restore sg */
+ sg->length += qc->pad_len;
return -1;
+ }
sg_dma_address(sg) = dma_address;
+skip_map:
sg_dma_len(sg) = sg->length;
DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg),
@@ -2372,19 +2688,69 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc)
static int ata_sg_setup(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- struct scatterlist *sg = qc->sg;
- int n_elem, dir;
+ struct scatterlist *sg = qc->__sg;
+ struct scatterlist *lsg = &sg[qc->n_elem - 1];
+ int n_elem, pre_n_elem, dir, trim_sg = 0;
VPRINTK("ENTER, ata%u\n", ap->id);
assert(qc->flags & ATA_QCFLAG_SG);
+ /* we must lengthen transfers to end on a 32-bit boundary */
+ qc->pad_len = lsg->length & 3;
+ if (qc->pad_len) {
+ void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
+ struct scatterlist *psg = &qc->pad_sgent;
+ unsigned int offset;
+
+ assert(qc->dev->class == ATA_DEV_ATAPI);
+
+ memset(pad_buf, 0, ATA_DMA_PAD_SZ);
+
+ /*
+ * psg->page/offset are used to copy to-be-written
+ * data in this function or read data in ata_sg_clean.
+ */
+ offset = lsg->offset + lsg->length - qc->pad_len;
+ psg->page = nth_page(lsg->page, offset >> PAGE_SHIFT);
+ psg->offset = offset_in_page(offset);
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE) {
+ void *addr = kmap_atomic(psg->page, KM_IRQ0);
+ memcpy(pad_buf, addr + psg->offset, qc->pad_len);
+ kunmap_atomic(psg->page, KM_IRQ0);
+ }
+
+ sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ);
+ sg_dma_len(psg) = ATA_DMA_PAD_SZ;
+ /* trim last sg */
+ lsg->length -= qc->pad_len;
+ if (lsg->length == 0)
+ trim_sg = 1;
+
+ DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n",
+ qc->n_elem - 1, lsg->length, qc->pad_len);
+ }
+
+ pre_n_elem = qc->n_elem;
+ if (trim_sg && pre_n_elem)
+ pre_n_elem--;
+
+ if (!pre_n_elem) {
+ n_elem = 0;
+ goto skip_map;
+ }
+
dir = qc->dma_dir;
- n_elem = dma_map_sg(ap->host_set->dev, sg, qc->n_elem, dir);
- if (n_elem < 1)
+ n_elem = dma_map_sg(ap->host_set->dev, sg, pre_n_elem, dir);
+ if (n_elem < 1) {
+ /* restore last sg */
+ lsg->length += qc->pad_len;
return -1;
+ }
DPRINTK("%d sg elements mapped\n", n_elem);
+skip_map:
qc->n_elem = n_elem;
return 0;
@@ -2393,13 +2759,13 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
/**
* ata_poll_qc_complete - turn irq back on and finish qc
* @qc: Command to complete
- * @drv_stat: ATA status register content
+ * @err_mask: ATA status register content
*
* LOCKING:
* None. (grabs host lock)
*/
-void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_poll_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask)
{
struct ata_port *ap = qc->ap;
unsigned long flags;
@@ -2407,38 +2773,37 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
spin_lock_irqsave(&ap->host_set->lock, flags);
ap->flags &= ~ATA_FLAG_NOINTR;
ata_irq_on(ap);
- ata_qc_complete(qc, drv_stat);
+ ata_qc_complete(qc, err_mask);
spin_unlock_irqrestore(&ap->host_set->lock, flags);
}
/**
* ata_pio_poll -
- * @ap:
+ * @ap: the target ata_port
*
* LOCKING:
* None. (executing in kernel thread context)
*
* RETURNS:
- *
+ * timeout value to use
*/
static unsigned long ata_pio_poll(struct ata_port *ap)
{
u8 status;
- unsigned int poll_state = PIO_ST_UNKNOWN;
- unsigned int reg_state = PIO_ST_UNKNOWN;
- const unsigned int tmout_state = PIO_ST_TMOUT;
-
- switch (ap->pio_task_state) {
- case PIO_ST:
- case PIO_ST_POLL:
- poll_state = PIO_ST_POLL;
- reg_state = PIO_ST;
+ unsigned int poll_state = HSM_ST_UNKNOWN;
+ unsigned int reg_state = HSM_ST_UNKNOWN;
+
+ switch (ap->hsm_task_state) {
+ case HSM_ST:
+ case HSM_ST_POLL:
+ poll_state = HSM_ST_POLL;
+ reg_state = HSM_ST;
break;
- case PIO_ST_LAST:
- case PIO_ST_LAST_POLL:
- poll_state = PIO_ST_LAST_POLL;
- reg_state = PIO_ST_LAST;
+ case HSM_ST_LAST:
+ case HSM_ST_LAST_POLL:
+ poll_state = HSM_ST_LAST_POLL;
+ reg_state = HSM_ST_LAST;
break;
default:
BUG();
@@ -2448,20 +2813,20 @@ static unsigned long ata_pio_poll(struct ata_port *ap)
status = ata_chk_status(ap);
if (status & ATA_BUSY) {
if (time_after(jiffies, ap->pio_task_timeout)) {
- ap->pio_task_state = tmout_state;
+ ap->hsm_task_state = HSM_ST_TMOUT;
return 0;
}
- ap->pio_task_state = poll_state;
+ ap->hsm_task_state = poll_state;
return ATA_SHORT_PAUSE;
}
- ap->pio_task_state = reg_state;
+ ap->hsm_task_state = reg_state;
return 0;
}
/**
- * ata_pio_complete -
- * @ap:
+ * ata_pio_complete - check if drive is busy or idle
+ * @ap: the target ata_port
*
* LOCKING:
* None. (executing in kernel thread context)
@@ -2480,14 +2845,14 @@ static int ata_pio_complete (struct ata_port *ap)
* we enter, BSY will be cleared in a chk-status or two. If not,
* the drive is probably seeking or something. Snooze for a couple
* msecs, then chk-status again. If still busy, fall back to
- * PIO_ST_POLL state.
+ * HSM_ST_POLL state.
*/
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
msleep(2);
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10);
if (drv_stat & (ATA_BUSY | ATA_DRQ)) {
- ap->pio_task_state = PIO_ST_LAST_POLL;
+ ap->hsm_task_state = HSM_ST_LAST_POLL;
ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
return 0;
}
@@ -2495,16 +2860,16 @@ static int ata_pio_complete (struct ata_port *ap)
drv_stat = ata_wait_idle(ap);
if (!ata_ok(drv_stat)) {
- ap->pio_task_state = PIO_ST_ERR;
+ ap->hsm_task_state = HSM_ST_ERR;
return 0;
}
qc = ata_qc_from_tag(ap, ap->active_tag);
assert(qc != NULL);
- ap->pio_task_state = PIO_ST_IDLE;
+ ap->hsm_task_state = HSM_ST_IDLE;
- ata_poll_qc_complete(qc, drv_stat);
+ ata_poll_qc_complete(qc, 0);
/* another command may start at this point */
@@ -2513,7 +2878,7 @@ static int ata_pio_complete (struct ata_port *ap)
/**
- * swap_buf_le16 -
+ * swap_buf_le16 - swap halves of 16-words in place
* @buf: Buffer to swap
* @buf_words: Number of 16-bit words in buffer.
*
@@ -2522,6 +2887,7 @@ static int ata_pio_complete (struct ata_port *ap)
* vice-versa.
*
* LOCKING:
+ * Inherited from caller.
*/
void swap_buf_le16(u16 *buf, unsigned int buf_words)
{
@@ -2544,7 +2910,6 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2590,7 +2955,6 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf,
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2630,7 +2994,6 @@ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf,
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
@@ -2655,14 +3018,14 @@ static void ata_data_xfer(struct ata_port *ap, unsigned char *buf,
static void ata_pio_sector(struct ata_queued_cmd *qc)
{
int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
- struct scatterlist *sg = qc->sg;
+ struct scatterlist *sg = qc->__sg;
struct ata_port *ap = qc->ap;
struct page *page;
unsigned int offset;
unsigned char *buf;
if (qc->cursect == (qc->nsect - 1))
- ap->pio_task_state = PIO_ST_LAST;
+ ap->hsm_task_state = HSM_ST_LAST;
page = sg[qc->cursg].page;
offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE;
@@ -2705,14 +3068,14 @@ static void ata_pio_sector(struct ata_queued_cmd *qc)
static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
{
int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
- struct scatterlist *sg = qc->sg;
+ struct scatterlist *sg = qc->__sg;
struct ata_port *ap = qc->ap;
struct page *page;
unsigned char *buf;
unsigned int offset, count;
if (qc->curbytes + bytes >= qc->nbytes)
- ap->pio_task_state = PIO_ST_LAST;
+ ap->hsm_task_state = HSM_ST_LAST;
next_sg:
if (unlikely(qc->cursg >= qc->n_elem)) {
@@ -2734,11 +3097,11 @@ next_sg:
for (i = 0; i < words; i++)
ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write);
- ap->pio_task_state = PIO_ST_LAST;
+ ap->hsm_task_state = HSM_ST_LAST;
return;
}
- sg = &qc->sg[qc->cursg];
+ sg = &qc->__sg[qc->cursg];
page = sg->page;
offset = sg->offset + qc->cursg_ofs;
@@ -2783,7 +3146,6 @@ next_sg:
*
* LOCKING:
* Inherited from caller.
- *
*/
static void atapi_pio_bytes(struct ata_queued_cmd *qc)
@@ -2815,12 +3177,12 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
err_out:
printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n",
ap->id, dev->devno);
- ap->pio_task_state = PIO_ST_ERR;
+ ap->hsm_task_state = HSM_ST_ERR;
}
/**
- * ata_pio_sector -
- * @ap:
+ * ata_pio_block - start PIO on a block
+ * @ap: the target ata_port
*
* LOCKING:
* None. (executing in kernel thread context)
@@ -2832,19 +3194,19 @@ static void ata_pio_block(struct ata_port *ap)
u8 status;
/*
- * This is purely hueristic. This is a fast path.
+ * This is purely heuristic. This is a fast path.
* Sometimes when we enter, BSY will be cleared in
* a chk-status or two. If not, the drive is probably seeking
* or something. Snooze for a couple msecs, then
* chk-status again. If still busy, fall back to
- * PIO_ST_POLL state.
+ * HSM_ST_POLL state.
*/
status = ata_busy_wait(ap, ATA_BUSY, 5);
if (status & ATA_BUSY) {
msleep(2);
status = ata_busy_wait(ap, ATA_BUSY, 10);
if (status & ATA_BUSY) {
- ap->pio_task_state = PIO_ST_POLL;
+ ap->hsm_task_state = HSM_ST_POLL;
ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO;
return;
}
@@ -2856,7 +3218,7 @@ static void ata_pio_block(struct ata_port *ap)
if (is_atapi_taskfile(&qc->tf)) {
/* no more data to transfer or unsupported ATAPI command */
if ((status & ATA_DRQ) == 0) {
- ap->pio_task_state = PIO_ST_LAST;
+ ap->hsm_task_state = HSM_ST_LAST;
return;
}
@@ -2864,7 +3226,7 @@ static void ata_pio_block(struct ata_port *ap)
} else {
/* handle BSY=0, DRQ=0 as error */
if ((status & ATA_DRQ) == 0) {
- ap->pio_task_state = PIO_ST_ERR;
+ ap->hsm_task_state = HSM_ST_ERR;
return;
}
@@ -2875,18 +3237,15 @@ static void ata_pio_block(struct ata_port *ap)
static void ata_pio_error(struct ata_port *ap)
{
struct ata_queued_cmd *qc;
- u8 drv_stat;
+
+ printk(KERN_WARNING "ata%u: PIO error\n", ap->id);
qc = ata_qc_from_tag(ap, ap->active_tag);
assert(qc != NULL);
- drv_stat = ata_chk_status(ap);
- printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n",
- ap->id, drv_stat);
-
- ap->pio_task_state = PIO_ST_IDLE;
+ ap->hsm_task_state = HSM_ST_IDLE;
- ata_poll_qc_complete(qc, drv_stat | ATA_ERR);
+ ata_poll_qc_complete(qc, AC_ERR_ATA_BUS);
}
static void ata_pio_task(void *_data)
@@ -2899,25 +3258,25 @@ fsm_start:
timeout = 0;
qc_completed = 0;
- switch (ap->pio_task_state) {
- case PIO_ST_IDLE:
+ switch (ap->hsm_task_state) {
+ case HSM_ST_IDLE:
return;
- case PIO_ST:
+ case HSM_ST:
ata_pio_block(ap);
break;
- case PIO_ST_LAST:
+ case HSM_ST_LAST:
qc_completed = ata_pio_complete(ap);
break;
- case PIO_ST_POLL:
- case PIO_ST_LAST_POLL:
+ case HSM_ST_POLL:
+ case HSM_ST_LAST_POLL:
timeout = ata_pio_poll(ap);
break;
- case PIO_ST_TMOUT:
- case PIO_ST_ERR:
+ case HSM_ST_TMOUT:
+ case HSM_ST_ERR:
ata_pio_error(ap);
return;
}
@@ -2928,52 +3287,6 @@ fsm_start:
goto fsm_start;
}
-static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
- struct scsi_cmnd *cmd)
-{
- DECLARE_COMPLETION(wait);
- struct ata_queued_cmd *qc;
- unsigned long flags;
- int rc;
-
- DPRINTK("ATAPI request sense\n");
-
- qc = ata_qc_new_init(ap, dev);
- BUG_ON(qc == NULL);
-
- /* FIXME: is this needed? */
- memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
-
- ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
- qc->dma_dir = DMA_FROM_DEVICE;
-
- memset(&qc->cdb, 0, ap->cdb_len);
- qc->cdb[0] = REQUEST_SENSE;
- qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
-
- qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- qc->tf.command = ATA_CMD_PACKET;
-
- qc->tf.protocol = ATA_PROT_ATAPI;
- qc->tf.lbam = (8 * 1024) & 0xff;
- qc->tf.lbah = (8 * 1024) >> 8;
- qc->nbytes = SCSI_SENSE_BUFFERSIZE;
-
- qc->waiting = &wait;
- qc->complete_fn = ata_qc_complete_noop;
-
- spin_lock_irqsave(&ap->host_set->lock, flags);
- rc = ata_qc_issue(qc);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- if (rc)
- ata_port_disable(ap);
- else
- wait_for_completion(&wait);
-
- DPRINTK("EXIT\n");
-}
-
/**
* ata_qc_timeout - Handle timeout of queued command
* @qc: Command that timed out
@@ -2997,32 +3310,11 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_host_set *host_set = ap->host_set;
- struct ata_device *dev = qc->dev;
u8 host_stat = 0, drv_stat;
unsigned long flags;
DPRINTK("ENTER\n");
- /* FIXME: doesn't this conflict with timeout handling? */
- if (qc->dev->class == ATA_DEV_ATAPI && qc->scsicmd) {
- struct scsi_cmnd *cmd = qc->scsicmd;
-
- if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) {
-
- /* finish completing original command */
- spin_lock_irqsave(&host_set->lock, flags);
- __ata_qc_complete(qc);
- spin_unlock_irqrestore(&host_set->lock, flags);
-
- atapi_request_sense(ap, dev, cmd);
-
- cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16);
- scsi_finish_command(cmd);
-
- goto out;
- }
- }
-
spin_lock_irqsave(&host_set->lock, flags);
/* hack alert! We cannot use the supplied completion
@@ -3055,13 +3347,12 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc)
ap->id, qc->tf.command, drv_stat, host_stat);
/* complete taskfile transaction */
- ata_qc_complete(qc, drv_stat);
+ ata_qc_complete(qc, ac_err_mask(drv_stat));
break;
}
spin_unlock_irqrestore(&host_set->lock, flags);
-out:
DPRINTK("EXIT\n");
}
@@ -3091,14 +3382,14 @@ void ata_eng_timeout(struct ata_port *ap)
DPRINTK("ENTER\n");
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (!qc) {
+ if (qc)
+ ata_qc_timeout(qc);
+ else {
printk(KERN_ERR "ata%u: BUG: timeout without command\n",
ap->id);
goto out;
}
- ata_qc_timeout(qc);
-
out:
DPRINTK("EXIT\n");
}
@@ -3145,25 +3436,17 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
qc = ata_qc_new(ap);
if (qc) {
- qc->sg = NULL;
- qc->flags = 0;
qc->scsicmd = NULL;
qc->ap = ap;
qc->dev = dev;
- qc->cursect = qc->cursg = qc->cursg_ofs = 0;
- qc->nsect = 0;
- qc->nbytes = qc->curbytes = 0;
-
- ata_tf_init(ap, &qc->tf, dev->devno);
- if (dev->flags & ATA_DFLAG_LBA48)
- qc->tf.flags |= ATA_TFLAG_LBA48;
+ ata_qc_reinit(qc);
}
return qc;
}
-static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat)
+int ata_qc_complete_noop(struct ata_queued_cmd *qc, unsigned int err_mask)
{
return 0;
}
@@ -3201,7 +3484,6 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc)
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
- *
*/
void ata_qc_free(struct ata_queued_cmd *qc)
{
@@ -3214,17 +3496,16 @@ void ata_qc_free(struct ata_queued_cmd *qc)
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
- * @drv_stat: ATA Status register contents
+ * @err_mask: ATA Status register contents
*
* Indicate to the mid and upper layers that an ATA
* command has completed, with either an ok or not-ok status.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
- *
*/
-void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask)
{
int rc;
@@ -3241,7 +3522,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
qc->flags &= ~ATA_QCFLAG_ACTIVE;
/* call completion callback */
- rc = qc->complete_fn(qc, drv_stat);
+ rc = qc->complete_fn(qc, err_mask);
/* if callback indicates not to complete command (non-zero),
* return immediately
@@ -3348,7 +3629,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc)
switch (qc->tf.protocol) {
case ATA_PROT_NODATA:
- ata_tf_to_host_nolock(ap, &qc->tf);
+ ata_tf_to_host(ap, &qc->tf);
break;
case ATA_PROT_DMA:
@@ -3359,20 +3640,20 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc)
case ATA_PROT_PIO: /* load tf registers, initiate polling pio */
ata_qc_set_polling(qc);
- ata_tf_to_host_nolock(ap, &qc->tf);
- ap->pio_task_state = PIO_ST;
+ ata_tf_to_host(ap, &qc->tf);
+ ap->hsm_task_state = HSM_ST;
queue_work(ata_wq, &ap->pio_task);
break;
case ATA_PROT_ATAPI:
ata_qc_set_polling(qc);
- ata_tf_to_host_nolock(ap, &qc->tf);
+ ata_tf_to_host(ap, &qc->tf);
queue_work(ata_wq, &ap->packet_task);
break;
case ATA_PROT_ATAPI_NODATA:
ap->flags |= ATA_FLAG_NOINTR;
- ata_tf_to_host_nolock(ap, &qc->tf);
+ ata_tf_to_host(ap, &qc->tf);
queue_work(ata_wq, &ap->packet_task);
break;
@@ -3586,7 +3867,7 @@ u8 ata_bmdma_status(struct ata_port *ap)
void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
host_stat = readb(mmio + ATA_DMA_STATUS);
} else
- host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
return host_stat;
}
@@ -3679,7 +3960,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
ap->ops->irq_clear(ap);
/* complete taskfile transaction */
- ata_qc_complete(qc, status);
+ ata_qc_complete(qc, ac_err_mask(status));
break;
default:
@@ -3715,7 +3996,6 @@ idle_irq:
*
* RETURNS:
* IRQ_NONE or IRQ_HANDLED.
- *
*/
irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
@@ -3775,7 +4055,7 @@ static void atapi_packet_task(void *_data)
/* sleep-wait for BSY to clear */
DPRINTK("busy wait\n");
if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB))
- goto err_out;
+ goto err_out_status;
/* make sure DRQ is set */
status = ata_chk_status(ap);
@@ -3806,14 +4086,16 @@ static void atapi_packet_task(void *_data)
ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
/* PIO commands are handled by polling */
- ap->pio_task_state = PIO_ST;
+ ap->hsm_task_state = HSM_ST;
queue_work(ata_wq, &ap->pio_task);
}
return;
+err_out_status:
+ status = ata_chk_status(ap);
err_out:
- ata_poll_qc_complete(qc, ATA_ERR);
+ ata_poll_qc_complete(qc, __ac_err_mask(status));
}
@@ -3827,16 +4109,24 @@ err_out:
* May be used as the port_start() entry in ata_port_operations.
*
* LOCKING:
+ * Inherited from caller.
*/
int ata_port_start (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
+ int rc;
ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL);
if (!ap->prd)
return -ENOMEM;
+ rc = ata_pad_alloc(ap, dev);
+ if (rc) {
+ dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
+ return rc;
+ }
+
DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd, (unsigned long long) ap->prd_dma);
return 0;
@@ -3852,6 +4142,7 @@ int ata_port_start (struct ata_port *ap)
* May be used as the port_stop() entry in ata_port_operations.
*
* LOCKING:
+ * Inherited from caller.
*/
void ata_port_stop (struct ata_port *ap)
@@ -3859,6 +4150,7 @@ void ata_port_stop (struct ata_port *ap)
struct device *dev = ap->host_set->dev;
dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
+ ata_pad_free(ap, dev);
}
void ata_host_stop (struct ata_host_set *host_set)
@@ -3874,6 +4166,7 @@ void ata_host_stop (struct ata_host_set *host_set)
* @do_unregister: 1 if we fully unregister, 0 to just stop the port
*
* LOCKING:
+ * Inherited from caller.
*/
static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
@@ -3901,12 +4194,11 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
*
* LOCKING:
* Inherited from caller.
- *
*/
static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
struct ata_host_set *host_set,
- struct ata_probe_ent *ent, unsigned int port_no)
+ const struct ata_probe_ent *ent, unsigned int port_no)
{
unsigned int i;
@@ -3916,8 +4208,6 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
host->unique_id = ata_unique_id++;
host->max_cmd_len = 12;
- scsi_assign_lock(host, &host_set->lock);
-
ap->flags = ATA_FLAG_PORT_DISABLED;
ap->id = host->unique_id;
ap->host = host;
@@ -3962,10 +4252,9 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
*
* RETURNS:
* New ata_port on success, for NULL on error.
- *
*/
-static struct ata_port * ata_host_add(struct ata_probe_ent *ent,
+static struct ata_port * ata_host_add(const struct ata_probe_ent *ent,
struct ata_host_set *host_set,
unsigned int port_no)
{
@@ -4010,10 +4299,9 @@ err_out:
*
* RETURNS:
* Number of ports registered. Zero on error (no ports registered).
- *
*/
-int ata_device_add(struct ata_probe_ent *ent)
+int ata_device_add(const struct ata_probe_ent *ent)
{
unsigned int count = 0, i;
struct device *dev = ent->dev;
@@ -4021,11 +4309,10 @@ int ata_device_add(struct ata_probe_ent *ent)
DPRINTK("ENTER\n");
/* alloc a container for our list of ATA ports (buses) */
- host_set = kmalloc(sizeof(struct ata_host_set) +
+ host_set = kzalloc(sizeof(struct ata_host_set) +
(ent->n_ports * sizeof(void *)), GFP_KERNEL);
if (!host_set)
return 0;
- memset(host_set, 0, sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *)));
spin_lock_init(&host_set->lock);
host_set->dev = dev;
@@ -4065,10 +4352,8 @@ int ata_device_add(struct ata_probe_ent *ent)
count++;
}
- if (!count) {
- kfree(host_set);
- return 0;
- }
+ if (!count)
+ goto err_free_ret;
/* obtain irq, that is shared between channels */
if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags,
@@ -4113,7 +4398,7 @@ int ata_device_add(struct ata_probe_ent *ent)
for (i = 0; i < count; i++) {
struct ata_port *ap = host_set->ports[i];
- scsi_scan_host(ap->host);
+ ata_scsi_scan_host(ap);
}
dev_set_drvdata(dev, host_set);
@@ -4126,12 +4411,59 @@ err_out:
ata_host_remove(host_set->ports[i], 1);
scsi_host_put(host_set->ports[i]->host);
}
+err_free_ret:
kfree(host_set);
VPRINTK("EXIT, returning 0\n");
return 0;
}
/**
+ * ata_host_set_remove - PCI layer callback for device removal
+ * @host_set: ATA host set that was removed
+ *
+ * Unregister all objects associated with this host set. Free those
+ * objects.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ */
+
+void ata_host_set_remove(struct ata_host_set *host_set)
+{
+ struct ata_port *ap;
+ unsigned int i;
+
+ for (i = 0; i < host_set->n_ports; i++) {
+ ap = host_set->ports[i];
+ scsi_remove_host(ap->host);
+ }
+
+ free_irq(host_set->irq, host_set);
+
+ for (i = 0; i < host_set->n_ports; i++) {
+ ap = host_set->ports[i];
+
+ ata_scsi_release(ap->host);
+
+ if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) {
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ if (ioaddr->cmd_addr == 0x1f0)
+ release_region(0x1f0, 8);
+ else if (ioaddr->cmd_addr == 0x170)
+ release_region(0x170, 8);
+ }
+
+ scsi_host_put(ap->host);
+ }
+
+ if (host_set->ops->host_stop)
+ host_set->ops->host_stop(host_set);
+
+ kfree(host_set);
+}
+
+/**
* ata_scsi_release - SCSI layer callback hook for host unload
* @host: libata host to be unloaded
*
@@ -4185,19 +4517,17 @@ void ata_std_ports(struct ata_ioports *ioaddr)
}
static struct ata_probe_ent *
-ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
+ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
{
struct ata_probe_ent *probe_ent;
- probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent) {
printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
kobject_name(&(dev->kobj)));
return NULL;
}
- memset(probe_ent, 0, sizeof(*probe_ent));
-
INIT_LIST_HEAD(&probe_ent->node);
probe_ent->dev = dev;
@@ -4226,85 +4556,88 @@ void ata_pci_host_stop (struct ata_host_set *host_set)
* ata_pci_init_native_mode - Initialize native-mode driver
* @pdev: pci device to be initialized
* @port: array[2] of pointers to port info structures.
+ * @ports: bitmap of ports present
*
* Utility function which allocates and initializes an
* ata_probe_ent structure for a standard dual-port
* PIO-based IDE controller. The returned ata_probe_ent
* structure can be passed to ata_device_add(). The returned
* ata_probe_ent structure should then be freed with kfree().
+ *
+ * The caller need only pass the address of the primary port, the
+ * secondary will be deduced automatically. If the device has non
+ * standard secondary port mappings this function can be called twice,
+ * once for each interface.
*/
struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
+ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
{
struct ata_probe_ent *probe_ent =
ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ int p = 0;
+
if (!probe_ent)
return NULL;
- probe_ent->n_ports = 2;
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->private_data = port[0]->private_data;
+
+ if (ports & ATA_PORT_PRIMARY) {
+ probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0);
+ probe_ent->port[p].altstatus_addr =
+ probe_ent->port[p].ctl_addr =
+ pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
+ probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4);
+ ata_std_ports(&probe_ent->port[p]);
+ p++;
+ }
- probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0);
- probe_ent->port[0].altstatus_addr =
- probe_ent->port[0].ctl_addr =
- pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
- probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4);
-
- probe_ent->port[1].cmd_addr = pci_resource_start(pdev, 2);
- probe_ent->port[1].altstatus_addr =
- probe_ent->port[1].ctl_addr =
- pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
- probe_ent->port[1].bmdma_addr = pci_resource_start(pdev, 4) + 8;
-
- ata_std_ports(&probe_ent->port[0]);
- ata_std_ports(&probe_ent->port[1]);
+ if (ports & ATA_PORT_SECONDARY) {
+ probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2);
+ probe_ent->port[p].altstatus_addr =
+ probe_ent->port[p].ctl_addr =
+ pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
+ probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8;
+ ata_std_ports(&probe_ent->port[p]);
+ p++;
+ }
+ probe_ent->n_ports = p;
return probe_ent;
}
-static struct ata_probe_ent *
-ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port,
- struct ata_probe_ent **ppe2)
+static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info *port, int port_num)
{
- struct ata_probe_ent *probe_ent, *probe_ent2;
+ struct ata_probe_ent *probe_ent;
- probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
if (!probe_ent)
return NULL;
- probe_ent2 = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[1]);
- if (!probe_ent2) {
- kfree(probe_ent);
- return NULL;
- }
- probe_ent->n_ports = 1;
- probe_ent->irq = 14;
-
- probe_ent->hard_port_no = 0;
probe_ent->legacy_mode = 1;
-
- probe_ent2->n_ports = 1;
- probe_ent2->irq = 15;
-
- probe_ent2->hard_port_no = 1;
- probe_ent2->legacy_mode = 1;
-
- probe_ent->port[0].cmd_addr = 0x1f0;
- probe_ent->port[0].altstatus_addr =
- probe_ent->port[0].ctl_addr = 0x3f6;
- probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4);
-
- probe_ent2->port[0].cmd_addr = 0x170;
- probe_ent2->port[0].altstatus_addr =
- probe_ent2->port[0].ctl_addr = 0x376;
- probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8;
-
+ probe_ent->n_ports = 1;
+ probe_ent->hard_port_no = port_num;
+ probe_ent->private_data = port->private_data;
+
+ switch(port_num)
+ {
+ case 0:
+ probe_ent->irq = 14;
+ probe_ent->port[0].cmd_addr = 0x1f0;
+ probe_ent->port[0].altstatus_addr =
+ probe_ent->port[0].ctl_addr = 0x3f6;
+ break;
+ case 1:
+ probe_ent->irq = 15;
+ probe_ent->port[0].cmd_addr = 0x170;
+ probe_ent->port[0].altstatus_addr =
+ probe_ent->port[0].ctl_addr = 0x376;
+ break;
+ }
+ probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num;
ata_std_ports(&probe_ent->port[0]);
- ata_std_ports(&probe_ent2->port[0]);
-
- *ppe2 = probe_ent2;
return probe_ent;
}
@@ -4327,13 +4660,12 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port,
*
* RETURNS:
* Zero on success, negative on errno-based value on error.
- *
*/
int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
unsigned int n_ports)
{
- struct ata_probe_ent *probe_ent, *probe_ent2 = NULL;
+ struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL;
struct ata_port_info *port[2];
u8 tmp8, mask;
unsigned int legacy_mode = 0;
@@ -4350,7 +4682,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0
&& (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
- /* TODO: support transitioning to native mode? */
+ /* TODO: What if one channel is in native mode ... */
pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
mask = (1 << 2) | (1 << 0);
if ((tmp8 & mask) != mask)
@@ -4358,11 +4690,20 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
}
/* FIXME... */
- if ((!legacy_mode) && (n_ports > 1)) {
- printk(KERN_ERR "ata: BUG: native mode, n_ports > 1\n");
- return -EINVAL;
+ if ((!legacy_mode) && (n_ports > 2)) {
+ printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n");
+ n_ports = 2;
+ /* For now */
}
+ /* FIXME: Really for ATA it isn't safe because the device may be
+ multi-purpose and we want to leave it alone if it was already
+ enabled. Secondly for shared use as Arjan says we want refcounting
+
+ Checking dev->is_enabled is insufficient as this is not set at
+ boot for the primary video which is BIOS enabled
+ */
+
rc = pci_enable_device(pdev);
if (rc)
return rc;
@@ -4373,6 +4714,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
goto err_out;
}
+ /* FIXME: Should use platform specific mappers for legacy port ranges */
if (legacy_mode) {
if (!request_region(0x1f0, 8, "libata")) {
struct resource *conflict, res;
@@ -4417,10 +4759,17 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
goto err_out_regions;
if (legacy_mode) {
- probe_ent = ata_pci_init_legacy_mode(pdev, port, &probe_ent2);
- } else
- probe_ent = ata_pci_init_native_mode(pdev, port);
- if (!probe_ent) {
+ if (legacy_mode & (1 << 0))
+ probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0);
+ if (legacy_mode & (1 << 1))
+ probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1);
+ } else {
+ if (n_ports == 2)
+ probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ else
+ probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
+ }
+ if (!probe_ent && !probe_ent2) {
rc = -ENOMEM;
goto err_out_regions;
}
@@ -4458,7 +4807,7 @@ err_out:
* @pdev: PCI device that was removed
*
* PCI layer indicates to libata via this hook that
- * hot-unplug or module unload event has occured.
+ * hot-unplug or module unload event has occurred.
* Handle this by unregistering all objects associated
* with this PCI device. Free those objects. Then finally
* release PCI resources and disable device.
@@ -4471,46 +4820,15 @@ void ata_pci_remove_one (struct pci_dev *pdev)
{
struct device *dev = pci_dev_to_dev(pdev);
struct ata_host_set *host_set = dev_get_drvdata(dev);
- struct ata_port *ap;
- unsigned int i;
-
- for (i = 0; i < host_set->n_ports; i++) {
- ap = host_set->ports[i];
-
- scsi_remove_host(ap->host);
- }
-
- free_irq(host_set->irq, host_set);
-
- for (i = 0; i < host_set->n_ports; i++) {
- ap = host_set->ports[i];
-
- ata_scsi_release(ap->host);
-
- if ((ap->flags & ATA_FLAG_NO_LEGACY) == 0) {
- struct ata_ioports *ioaddr = &ap->ioaddr;
-
- if (ioaddr->cmd_addr == 0x1f0)
- release_region(0x1f0, 8);
- else if (ioaddr->cmd_addr == 0x170)
- release_region(0x170, 8);
- }
-
- scsi_host_put(ap->host);
- }
-
- if (host_set->ops->host_stop)
- host_set->ops->host_stop(host_set);
-
- kfree(host_set);
+ ata_host_set_remove(host_set);
pci_release_regions(pdev);
pci_disable_device(pdev);
dev_set_drvdata(dev, NULL);
}
/* move to PCI subsystem */
-int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits)
+int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
{
unsigned long tmp = 0;
@@ -4563,6 +4881,27 @@ static void __exit ata_exit(void)
module_init(ata_init);
module_exit(ata_exit);
+static unsigned long ratelimit_time;
+static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED;
+
+int ata_ratelimit(void)
+{
+ int rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ata_ratelimit_lock, flags);
+
+ if (time_after(jiffies, ratelimit_time)) {
+ rc = 1;
+ ratelimit_time = jiffies + (HZ/5);
+ } else
+ rc = 0;
+
+ spin_unlock_irqrestore(&ata_ratelimit_lock, flags);
+
+ return rc;
+}
+
/*
* libata is essentially a library of internal helper functions for
* low-level ATA host controller drivers. As such, the API/ABI is
@@ -4573,6 +4912,7 @@ module_exit(ata_exit);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
EXPORT_SYMBOL_GPL(ata_std_ports);
EXPORT_SYMBOL_GPL(ata_device_add);
+EXPORT_SYMBOL_GPL(ata_host_set_remove);
EXPORT_SYMBOL_GPL(ata_sg_init);
EXPORT_SYMBOL_GPL(ata_sg_init_one);
EXPORT_SYMBOL_GPL(ata_qc_complete);
@@ -4586,7 +4926,6 @@ EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
EXPORT_SYMBOL_GPL(ata_check_status);
EXPORT_SYMBOL_GPL(ata_altstatus);
-EXPORT_SYMBOL_GPL(ata_chk_err);
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_port_stop);
@@ -4603,6 +4942,7 @@ EXPORT_SYMBOL_GPL(sata_phy_reset);
EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
EXPORT_SYMBOL_GPL(ata_port_disable);
+EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_scsi_error);
@@ -4614,6 +4954,9 @@ EXPORT_SYMBOL_GPL(ata_dev_id_string);
EXPORT_SYMBOL_GPL(ata_dev_config);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
+EXPORT_SYMBOL_GPL(ata_timing_compute);
+EXPORT_SYMBOL_GPL(ata_timing_merge);
+
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
EXPORT_SYMBOL_GPL(ata_pci_host_stop);