diff options
Diffstat (limited to 'drivers/scsi/libata-scsi.c')
-rw-r--r-- | drivers/scsi/libata-scsi.c | 272 |
1 files changed, 218 insertions, 54 deletions
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 9871f8272df..996058af1bc 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -41,6 +41,7 @@ #include <scsi/scsi_eh.h> #include <scsi/scsi_device.h> #include <scsi/scsi_request.h> +#include <scsi/scsi_tcq.h> #include <scsi/scsi_transport.h> #include <linux/libata.h> #include <linux/hdreg.h> @@ -302,7 +303,6 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) /** * ata_scsi_qc_new - acquire new ata_queued_cmd reference - * @ap: ATA port to which the new command is attached * @dev: ATA device to which the new command is attached * @cmd: SCSI command that originated this ATA command * @done: SCSI command completion function @@ -321,14 +321,13 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) * RETURNS: * Command allocated, or %NULL if none available. */ -struct ata_queued_cmd *ata_scsi_qc_new(struct ata_port *ap, - struct ata_device *dev, +struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct ata_queued_cmd *qc; - qc = ata_qc_new_init(ap, dev); + qc = ata_qc_new_init(dev); if (qc) { qc->scsicmd = cmd; qc->scsidone = done; @@ -398,7 +397,7 @@ int ata_scsi_device_resume(struct scsi_device *sdev) struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *dev = &ap->device[sdev->id]; - return ata_device_resume(ap, dev); + return ata_device_resume(dev); } int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) @@ -406,7 +405,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) struct ata_port *ap = ata_shost_to_port(sdev->host); struct ata_device *dev = &ap->device[sdev->id]; - return ata_device_suspend(ap, dev, state); + return ata_device_suspend(dev, state); } /** @@ -417,6 +416,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) * @sk: the sense key we'll fill out * @asc: the additional sense code we'll fill out * @ascq: the additional sense code qualifier we'll fill out + * @verbose: be verbose * * Converts an ATA error into a SCSI error. Fill out pointers to * SK, ASC, and ASCQ bytes for later use in fixed or descriptor @@ -426,7 +426,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) * spin_lock_irqsave(host_set lock) */ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, - u8 *ascq) + u8 *ascq, int verbose) { int i; @@ -491,8 +491,9 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, } } /* No immediate match */ - printk(KERN_WARNING "ata%u: no sense translation for " - "error 0x%02x\n", id, drv_err); + if (verbose) + printk(KERN_WARNING "ata%u: no sense translation for " + "error 0x%02x\n", id, drv_err); } /* Fall back to interpreting status bits */ @@ -505,8 +506,9 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, } } /* No error? Undecoded? */ - printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n", - id, drv_stat); + if (verbose) + printk(KERN_WARNING "ata%u: no sense translation for " + "status: 0x%02x\n", id, drv_stat); /* We need a sensible error return here, which is tricky, and one that won't cause people to do things like return a disk wrongly */ @@ -515,9 +517,10 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, *ascq = 0x00; translate_done: - printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to " - "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err, - *sk, *asc, *ascq); + if (verbose) + printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x " + "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", + id, drv_stat, drv_err, *sk, *asc, *ascq); return; } @@ -537,9 +540,10 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_taskfile *tf = &qc->tf; + struct ata_taskfile *tf = &qc->result_tf; unsigned char *sb = cmd->sense_buffer; unsigned char *desc = sb + 8; + int verbose = qc->ap->ops->error_handler == NULL; memset(sb, 0, SCSI_SENSE_BUFFERSIZE); @@ -552,7 +556,7 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) if (qc->err_mask || tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { ata_to_sense_error(qc->ap->id, tf->command, tf->feature, - &sb[1], &sb[2], &sb[3]); + &sb[1], &sb[2], &sb[3], verbose); sb[1] &= 0x0f; } @@ -608,8 +612,9 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) void ata_gen_fixed_sense(struct ata_queued_cmd *qc) { struct scsi_cmnd *cmd = qc->scsicmd; - struct ata_taskfile *tf = &qc->tf; + struct ata_taskfile *tf = &qc->result_tf; unsigned char *sb = cmd->sense_buffer; + int verbose = qc->ap->ops->error_handler == NULL; memset(sb, 0, SCSI_SENSE_BUFFERSIZE); @@ -622,7 +627,7 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc) if (qc->err_mask || tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { ata_to_sense_error(qc->ap->id, tf->command, tf->feature, - &sb[2], &sb[12], &sb[13]); + &sb[2], &sb[12], &sb[13], verbose); sb[2] &= 0x0f; } @@ -680,6 +685,14 @@ static void ata_scsi_dev_config(struct scsi_device *sdev, request_queue_t *q = sdev->request_queue; blk_queue_max_hw_segments(q, q->max_hw_segments - 1); } + + if (dev->flags & ATA_DFLAG_NCQ) { + int depth; + + depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); + depth = min(ATA_MAX_QUEUE - 1, depth); + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); + } } /** @@ -714,6 +727,43 @@ int ata_scsi_slave_config(struct scsi_device *sdev) } /** + * ata_scsi_change_queue_depth - SCSI callback for queue depth config + * @sdev: SCSI device to configure queue depth for + * @queue_depth: new queue depth + * + * This is libata standard hostt->change_queue_depth callback. + * SCSI will call into this callback when user tries to set queue + * depth via sysfs. + * + * LOCKING: + * SCSI layer (we don't care) + * + * RETURNS: + * Newly configured queue depth. + */ +int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev; + int max_depth; + + if (queue_depth < 1) + return sdev->queue_depth; + + dev = ata_scsi_find_dev(ap, sdev); + if (!dev || !ata_dev_enabled(dev)) + return sdev->queue_depth; + + max_depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); + max_depth = min(ATA_MAX_QUEUE - 1, max_depth); + if (queue_depth > max_depth) + queue_depth = max_depth; + + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth); + return queue_depth; +} + +/** * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command * @qc: Storage for translated ATA taskfile * @scsicmd: SCSI command to translate @@ -748,7 +798,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, tf->nsect = 1; /* 1 sector, lba=0 */ if (qc->dev->flags & ATA_DFLAG_LBA) { - qc->tf.flags |= ATA_TFLAG_LBA; + tf->flags |= ATA_TFLAG_LBA; tf->lbah = 0x0; tf->lbam = 0x0; @@ -1099,7 +1149,36 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicm */ goto nothing_to_do; - if (dev->flags & ATA_DFLAG_LBA) { + if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ) { + /* yay, NCQ */ + if (!lba_48_ok(block, n_block)) + goto out_of_range; + + tf->protocol = ATA_PROT_NCQ; + tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; + + if (tf->flags & ATA_TFLAG_WRITE) + tf->command = ATA_CMD_FPDMA_WRITE; + else + tf->command = ATA_CMD_FPDMA_READ; + + qc->nsect = n_block; + + tf->nsect = qc->tag << 3; + tf->hob_feature = (n_block >> 8) & 0xff; + tf->feature = n_block & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device = 1 << 6; + if (tf->flags & ATA_TFLAG_FUA) + tf->device |= 1 << 7; + } else if (dev->flags & ATA_DFLAG_LBA) { tf->flags |= ATA_TFLAG_LBA; if (lba_28_ok(block, n_block)) { @@ -1199,14 +1278,11 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) */ if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && ((cdb[2] & 0x20) || need_sense)) { - qc->ap->ops->tf_read(qc->ap, &qc->tf); ata_gen_ata_desc_sense(qc); } else { if (!need_sense) { cmd->result = SAM_STAT_GOOD; } else { - qc->ap->ops->tf_read(qc->ap, &qc->tf); - /* TODO: decide which descriptor format to use * for 48b LBA devices and call that here * instead of the fixed desc, which is only @@ -1217,10 +1293,8 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) } } - if (need_sense) { - /* The ata_gen_..._sense routines fill in tf */ - ata_dump_status(qc->ap->id, &qc->tf); - } + if (need_sense && !qc->ap->ops->error_handler) + ata_dump_status(qc->ap->id, &qc->result_tf); qc->scsidone(cmd); @@ -1228,8 +1302,40 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) } /** + * ata_scmd_need_defer - Check whether we need to defer scmd + * @dev: ATA device to which the command is addressed + * @is_io: Is the command IO (and thus possibly NCQ)? + * + * NCQ and non-NCQ commands cannot run together. As upper layer + * only knows the queue depth, we are responsible for maintaining + * exclusion. This function checks whether a new command can be + * issued to @dev. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 1 if deferring is needed, 0 otherwise. + */ +static int ata_scmd_need_defer(struct ata_device *dev, int is_io) +{ + struct ata_port *ap = dev->ap; + + if (!(dev->flags & ATA_DFLAG_NCQ)) + return 0; + + if (is_io) { + if (!ata_tag_valid(ap->active_tag)) + return 0; + } else { + if (!ata_tag_valid(ap->active_tag) && !ap->sactive) + return 0; + } + return 1; +} + +/** * ata_scsi_translate - Translate then issue SCSI command to ATA device - * @ap: ATA port to which the command is addressed * @dev: ATA device to which the command is addressed * @cmd: SCSI command to execute * @done: SCSI command completion function @@ -1250,19 +1356,25 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) * * LOCKING: * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command + * needs to be deferred. */ - -static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd, +static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), ata_xlat_func_t xlat_func) { struct ata_queued_cmd *qc; u8 *scsicmd = cmd->cmnd; + int is_io = xlat_func == ata_scsi_rw_xlat; VPRINTK("ENTER\n"); - qc = ata_scsi_qc_new(ap, dev, cmd, done); + if (unlikely(ata_scmd_need_defer(dev, is_io))) + goto defer; + + qc = ata_scsi_qc_new(dev, cmd, done); if (!qc) goto err_mem; @@ -1270,8 +1382,8 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, if (cmd->sc_data_direction == DMA_FROM_DEVICE || cmd->sc_data_direction == DMA_TO_DEVICE) { if (unlikely(cmd->request_bufflen < 1)) { - printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", - ap->id, dev->devno); + ata_dev_printk(dev, KERN_WARNING, + "WARNING: zero len r/w req\n"); goto err_did; } @@ -1293,13 +1405,13 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, ata_qc_issue(qc); VPRINTK("EXIT\n"); - return; + return 0; early_finish: ata_qc_free(qc); done(cmd); DPRINTK("EXIT - early finish (good or error)\n"); - return; + return 0; err_did: ata_qc_free(qc); @@ -1307,7 +1419,11 @@ err_mem: cmd->result = (DID_ERROR << 16); done(cmd); DPRINTK("EXIT - internal\n"); - return; + return 0; + +defer: + DPRINTK("EXIT - defer\n"); + return SCSI_MLQUEUE_DEVICE_BUSY; } /** @@ -2004,7 +2120,6 @@ static void atapi_sense_complete(struct ata_queued_cmd *qc) * a sense descriptors, since that's only * correct for ATA, not ATAPI */ - qc->ap->ops->tf_read(qc->ap, &qc->tf); ata_gen_ata_desc_sense(qc); } @@ -2070,6 +2185,26 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) VPRINTK("ENTER, err_mask 0x%X\n", err_mask); + /* handle completion from new EH */ + if (unlikely(qc->ap->ops->error_handler && + (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) { + + if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) { + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into a + * sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); + } + + qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; + qc->scsidone(cmd); + ata_qc_free(qc); + return; + } + + /* successful completion or old EH failure path */ if (unlikely(err_mask & AC_ERR_DEV)) { cmd->result = SAM_STAT_CHECK_CONDITION; atapi_request_sense(qc); @@ -2080,7 +2215,6 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) * a sense descriptors, since that's only * correct for ATA, not ATAPI */ - qc->ap->ops->tf_read(qc->ap, &qc->tf); ata_gen_ata_desc_sense(qc); } else { u8 *scsicmd = cmd->cmnd; @@ -2211,8 +2345,9 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) { if (unlikely(dev->class == ATA_DEV_ATAPI)) { - printk(KERN_WARNING "ata%u(%u): WARNING: ATAPI is %s, device ignored.\n", - ap->id, dev->devno, atapi_enabled ? "not supported with this driver" : "disabled"); + ata_dev_printk(dev, KERN_WARNING, + "WARNING: ATAPI is %s, device ignored.\n", + atapi_enabled ? "not supported with this driver" : "disabled"); return NULL; } } @@ -2361,6 +2496,9 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) */ qc->nsect = cmd->bufflen / ATA_SECT_SIZE; + /* request result TF */ + qc->flags |= ATA_QCFLAG_RESULT_TF; + return 0; invalid_fld: @@ -2437,19 +2575,24 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap, #endif } -static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), - struct ata_port *ap, struct ata_device *dev) +static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *), + struct ata_device *dev) { + int rc = 0; + if (dev->class == ATA_DEV_ATA) { ata_xlat_func_t xlat_func = ata_get_xlat_func(dev, cmd->cmnd[0]); if (xlat_func) - ata_scsi_translate(ap, dev, cmd, done, xlat_func); + rc = ata_scsi_translate(dev, cmd, done, xlat_func); else - ata_scsi_simulate(ap, dev, cmd, done); + ata_scsi_simulate(dev, cmd, done); } else - ata_scsi_translate(ap, dev, cmd, done, atapi_xlat); + rc = ata_scsi_translate(dev, cmd, done, atapi_xlat); + + return rc; } /** @@ -2468,15 +2611,16 @@ static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struc * Releases scsi-layer-held lock, and obtains host_set lock. * * RETURNS: - * Zero. + * Return value from __ata_scsi_queuecmd() if @cmd can be queued, + * 0 otherwise. */ - int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct ata_port *ap; struct ata_device *dev; struct scsi_device *scsidev = cmd->device; struct Scsi_Host *shost = scsidev->host; + int rc = 0; ap = ata_shost_to_port(shost); @@ -2487,7 +2631,7 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) dev = ata_scsi_find_dev(ap, scsidev); if (likely(dev)) - __ata_scsi_queuecmd(cmd, done, ap, dev); + rc = __ata_scsi_queuecmd(cmd, done, dev); else { cmd->result = (DID_BAD_TARGET << 16); done(cmd); @@ -2495,12 +2639,11 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) spin_unlock(&ap->host_set->lock); spin_lock(shost->host_lock); - return 0; + return rc; } /** * ata_scsi_simulate - simulate SCSI command on ATA device - * @ap: port the device is connected to * @dev: the target device * @cmd: SCSI command being sent to device. * @done: SCSI command completion function. @@ -2512,14 +2655,12 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) * spin_lock_irqsave(host_set lock) */ -void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd, +void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct ata_scsi_args args; const u8 *scsicmd = cmd->cmnd; - args.ap = ap; args.dev = dev; args.id = dev->id; args.cmd = cmd; @@ -2605,3 +2746,26 @@ void ata_scsi_scan_host(struct ata_port *ap) } } +/** + * ata_schedule_scsi_eh - schedule EH for SCSI host + * @shost: SCSI host to invoke error handling on. + * + * Schedule SCSI EH without scmd. This is a hack. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + **/ +void ata_schedule_scsi_eh(struct Scsi_Host *shost) +{ + unsigned long flags; + + spin_lock_irqsave(shost->host_lock, flags); + + if (scsi_host_set_state(shost, SHOST_RECOVERY) == 0 || + scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY) == 0) { + shost->host_eh_scheduled++; + scsi_eh_wakeup(shost); + } + + spin_unlock_irqrestore(shost->host_lock, flags); +} |