diff options
Diffstat (limited to 'drivers/scsi/libsas')
| -rw-r--r-- | drivers/scsi/libsas/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/scsi/libsas/Makefile | 4 | ||||
| -rw-r--r-- | drivers/scsi/libsas/sas_ata.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/libsas/sas_discover.c | 2 | ||||
| -rw-r--r-- | drivers/scsi/libsas/sas_expander.c | 35 | ||||
| -rw-r--r-- | drivers/scsi/libsas/sas_host_smp.c | 274 | ||||
| -rw-r--r-- | drivers/scsi/libsas/sas_internal.h | 16 | ||||
| -rw-r--r-- | drivers/scsi/libsas/sas_scsi_host.c | 9 | ||||
| -rw-r--r-- | drivers/scsi/libsas/sas_task.c | 36 |
9 files changed, 371 insertions, 16 deletions
diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig index c01a40d321d..18f33cd5441 100644 --- a/drivers/scsi/libsas/Kconfig +++ b/drivers/scsi/libsas/Kconfig @@ -38,6 +38,15 @@ config SCSI_SAS_ATA Builds in ATA support into libsas. Will necessitate the loading of libata along with libsas. +config SCSI_SAS_HOST_SMP + bool "Support for SMP interpretation for SAS hosts" + default y + depends on SCSI_SAS_LIBSAS + help + Allows sas hosts to receive SMP frames. Selecting this + option builds an SMP interpreter into libsas. Say + N here if you want to save the few kb this consumes. + config SCSI_SAS_LIBSAS_DEBUG bool "Compile the SAS Domain Transport Attributes in debug mode" default y diff --git a/drivers/scsi/libsas/Makefile b/drivers/scsi/libsas/Makefile index fd387b91856..1ad1323c60f 100644 --- a/drivers/scsi/libsas/Makefile +++ b/drivers/scsi/libsas/Makefile @@ -33,5 +33,7 @@ libsas-y += sas_init.o \ sas_dump.o \ sas_discover.o \ sas_expander.o \ - sas_scsi_host.o + sas_scsi_host.o \ + sas_task.o libsas-$(CONFIG_SCSI_SAS_ATA) += sas_ata.o +libsas-$(CONFIG_SCSI_SAS_HOST_SMP) += sas_host_smp.o
\ No newline at end of file diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 827cfb132f2..0996f866f14 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -498,7 +498,7 @@ static int sas_execute_task(struct sas_task *task, void *buffer, int size, goto ex_err; } wait_for_completion(&task->completion); - res = -ETASK; + res = -ECOMM; if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { int res2; SAS_DPRINTK("task aborted, flags:0x%x\n", diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 5f3a0d7b18d..31b9af22424 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -98,7 +98,7 @@ static int sas_get_port_device(struct asd_sas_port *port) dev->dev_type = SATA_PM; else dev->dev_type = SATA_DEV; - dev->tproto = SATA_PROTO; + dev->tproto = SAS_PROTOCOL_SATA; } else { struct sas_identify_frame *id = (struct sas_identify_frame *) dev->frame_rcvd; diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 8727436b222..aefd865a578 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -96,7 +96,7 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size, } wait_for_completion(&task->completion); - res = -ETASK; + res = -ECOMM; if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { SAS_DPRINTK("smp task timed out or aborted\n"); i->dft->lldd_abort_task(task); @@ -109,6 +109,16 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size, task->task_status.stat == SAM_GOOD) { res = 0; break; + } if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_UNDERRUN) { + /* no error, but return the number of bytes of + * underrun */ + res = task->task_status.residual; + break; + } if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_OVERRUN) { + res = -EMSGSIZE; + break; } else { SAS_DPRINTK("%s: task to dev %016llx response: 0x%x " "status 0x%x\n", __FUNCTION__, @@ -656,9 +666,9 @@ static struct domain_device *sas_ex_discover_end_dev( sas_ex_get_linkrate(parent, child, phy); #ifdef CONFIG_SCSI_SAS_ATA - if ((phy->attached_tproto & SAS_PROTO_STP) || phy->attached_sata_dev) { + if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) { child->dev_type = SATA_DEV; - if (phy->attached_tproto & SAS_PROTO_STP) + if (phy->attached_tproto & SAS_PROTOCOL_STP) child->tproto = phy->attached_tproto; if (phy->attached_sata_dev) child->tproto |= SATA_DEV; @@ -695,7 +705,7 @@ static struct domain_device *sas_ex_discover_end_dev( } } else #endif - if (phy->attached_tproto & SAS_PROTO_SSP) { + if (phy->attached_tproto & SAS_PROTOCOL_SSP) { child->dev_type = SAS_END_DEV; rphy = sas_end_device_alloc(phy->port); /* FIXME: error handling */ @@ -1896,11 +1906,9 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, } /* no rphy means no smp target support (ie aic94xx host) */ - if (!rphy) { - printk("%s: can we send a smp request to a host?\n", - __FUNCTION__); - return -EINVAL; - } + if (!rphy) + return sas_smp_host_handler(shost, req, rsp); + type = rphy->identify.device_type; if (type != SAS_EDGE_EXPANDER_DEVICE && @@ -1926,6 +1934,15 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, ret = smp_execute_task(dev, bio_data(req->bio), req->data_len, bio_data(rsp->bio), rsp->data_len); + if (ret > 0) { + /* positive number is the untransferred residual */ + rsp->data_len = ret; + req->data_len = 0; + ret = 0; + } else if (ret == 0) { + rsp->data_len = 0; + req->data_len = 0; + } return ret; } diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c new file mode 100644 index 00000000000..16f93123271 --- /dev/null +++ b/drivers/scsi/libsas/sas_host_smp.c @@ -0,0 +1,274 @@ +/* + * Serial Attached SCSI (SAS) Expander discovery and configuration + * + * Copyright (C) 2007 James E.J. Bottomley + * <James.Bottomley@HansenPartnership.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 only. + */ +#include <linux/scatterlist.h> +#include <linux/blkdev.h> + +#include "sas_internal.h" + +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_sas.h> +#include "../scsi_sas_internal.h" + +static void sas_host_smp_discover(struct sas_ha_struct *sas_ha, u8 *resp_data, + u8 phy_id) +{ + struct sas_phy *phy; + struct sas_rphy *rphy; + + if (phy_id >= sas_ha->num_phys) { + resp_data[2] = SMP_RESP_NO_PHY; + return; + } + resp_data[2] = SMP_RESP_FUNC_ACC; + + phy = sas_ha->sas_phy[phy_id]->phy; + resp_data[9] = phy_id; + resp_data[13] = phy->negotiated_linkrate; + memcpy(resp_data + 16, sas_ha->sas_addr, SAS_ADDR_SIZE); + memcpy(resp_data + 24, sas_ha->sas_phy[phy_id]->attached_sas_addr, + SAS_ADDR_SIZE); + resp_data[40] = (phy->minimum_linkrate << 4) | + phy->minimum_linkrate_hw; + resp_data[41] = (phy->maximum_linkrate << 4) | + phy->maximum_linkrate_hw; + + if (!sas_ha->sas_phy[phy_id]->port || + !sas_ha->sas_phy[phy_id]->port->port_dev) + return; + + rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy; + resp_data[12] = rphy->identify.device_type << 4; + resp_data[14] = rphy->identify.initiator_port_protocols; + resp_data[15] = rphy->identify.target_port_protocols; +} + +static void sas_report_phy_sata(struct sas_ha_struct *sas_ha, u8 *resp_data, + u8 phy_id) +{ + struct sas_rphy *rphy; + struct dev_to_host_fis *fis; + int i; + + if (phy_id >= sas_ha->num_phys) { + resp_data[2] = SMP_RESP_NO_PHY; + return; + } + + resp_data[2] = SMP_RESP_PHY_NO_SATA; + + if (!sas_ha->sas_phy[phy_id]->port) + return; + + rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy; + fis = (struct dev_to_host_fis *) + sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd; + if (rphy->identify.target_port_protocols != SAS_PROTOCOL_SATA) + return; + + resp_data[2] = SMP_RESP_FUNC_ACC; + resp_data[9] = phy_id; + memcpy(resp_data + 16, sas_ha->sas_phy[phy_id]->attached_sas_addr, + SAS_ADDR_SIZE); + + /* check to see if we have a valid d2h fis */ + if (fis->fis_type != 0x34) + return; + + /* the d2h fis is required by the standard to be in LE format */ + for (i = 0; i < 20; i += 4) { + u8 *dst = resp_data + 24 + i, *src = + &sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd[i]; + dst[0] = src[3]; + dst[1] = src[2]; + dst[2] = src[1]; + dst[3] = src[0]; + } +} + +static void sas_phy_control(struct sas_ha_struct *sas_ha, u8 phy_id, + u8 phy_op, enum sas_linkrate min, + enum sas_linkrate max, u8 *resp_data) +{ + struct sas_internal *i = + to_sas_internal(sas_ha->core.shost->transportt); + struct sas_phy_linkrates rates; + + if (phy_id >= sas_ha->num_phys) { + resp_data[2] = SMP_RESP_NO_PHY; + return; + } + switch (phy_op) { + case PHY_FUNC_NOP: + case PHY_FUNC_LINK_RESET: + case PHY_FUNC_HARD_RESET: + case PHY_FUNC_DISABLE: + case PHY_FUNC_CLEAR_ERROR_LOG: + case PHY_FUNC_CLEAR_AFFIL: + case PHY_FUNC_TX_SATA_PS_SIGNAL: + break; + + default: + resp_data[2] = SMP_RESP_PHY_UNK_OP; + return; + } + + rates.minimum_linkrate = min; + rates.maximum_linkrate = max; + + if (i->dft->lldd_control_phy(sas_ha->sas_phy[phy_id], phy_op, &rates)) + resp_data[2] = SMP_RESP_FUNC_FAILED; + else + resp_data[2] = SMP_RESP_FUNC_ACC; +} + +int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, + struct request *rsp) +{ + u8 *req_data = NULL, *resp_data = NULL, *buf; + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + int error = -EINVAL, resp_data_len = rsp->data_len; + + /* eight is the minimum size for request and response frames */ + if (req->data_len < 8 || rsp->data_len < 8) + goto out; + + if (bio_offset(req->bio) + req->data_len > PAGE_SIZE || + bio_offset(rsp->bio) + rsp->data_len > PAGE_SIZE) { + shost_printk(KERN_ERR, shost, + "SMP request/response frame crosses page boundary"); + goto out; + } + + req_data = kzalloc(req->data_len, GFP_KERNEL); + + /* make sure frame can always be built ... we copy + * back only the requested length */ + resp_data = kzalloc(max(rsp->data_len, 128U), GFP_KERNEL); + + if (!req_data || !resp_data) { + error = -ENOMEM; + goto out; + } + + local_irq_disable(); + buf = kmap_atomic(bio_page(req->bio), KM_USER0) + bio_offset(req->bio); + memcpy(req_data, buf, req->data_len); + kunmap_atomic(buf - bio_offset(req->bio), KM_USER0); + local_irq_enable(); + + if (req_data[0] != SMP_REQUEST) + goto out; + + /* always succeeds ... even if we can't process the request + * the result is in the response frame */ + error = 0; + + /* set up default don't know response */ + resp_data[0] = SMP_RESPONSE; + resp_data[1] = req_data[1]; + resp_data[2] = SMP_RESP_FUNC_UNK; + + switch (req_data[1]) { + case SMP_REPORT_GENERAL: + req->data_len -= 8; + resp_data_len -= 32; + resp_data[2] = SMP_RESP_FUNC_ACC; + resp_data[9] = sas_ha->num_phys; + break; + + case SMP_REPORT_MANUF_INFO: + req->data_len -= 8; + resp_data_len -= 64; + resp_data[2] = SMP_RESP_FUNC_ACC; + memcpy(resp_data + 12, shost->hostt->name, + SAS_EXPANDER_VENDOR_ID_LEN); + memcpy(resp_data + 20, "libsas virt phy", + SAS_EXPANDER_PRODUCT_ID_LEN); + break; + + case SMP_READ_GPIO_REG: + /* FIXME: need GPIO support in the transport class */ + break; + + case SMP_DISCOVER: + req->data_len =- 16; + if (req->data_len < 0) { + req->data_len = 0; + error = -EINVAL; + goto out; + } + resp_data_len -= 56; + sas_host_smp_discover(sas_ha, resp_data, req_data[9]); + break; + + case SMP_REPORT_PHY_ERR_LOG: + /* FIXME: could implement this with additional + * libsas callbacks providing the HW supports it */ + break; + + case SMP_REPORT_PHY_SATA: + req->data_len =- 16; + if (req->data_len < 0) { + req->data_len = 0; + error = -EINVAL; + goto out; + } + resp_data_len -= 60; + sas_report_phy_sata(sas_ha, resp_data, req_data[9]); + break; + + case SMP_REPORT_ROUTE_INFO: + /* Can't implement; hosts have no routes */ + break; + + case SMP_WRITE_GPIO_REG: + /* FIXME: need GPIO support in the transport class */ + break; + + case SMP_CONF_ROUTE_INFO: + /* Can't implement; hosts have no routes */ + break; + + case SMP_PHY_CONTROL: + req->data_len =- 44; + if (req->data_len < 0) { + req->data_len = 0; + error = -EINVAL; + goto out; + } + resp_data_len -= 8; + sas_phy_control(sas_ha, req_data[9], req_data[10], + req_data[32] >> 4, req_data[33] >> 4, + resp_data); + break; + + case SMP_PHY_TEST_FUNCTION: + /* FIXME: should this be implemented? */ + break; + + default: + /* probably a 2.0 function */ + break; + } + + local_irq_disable(); + buf = kmap_atomic(bio_page(rsp->bio), KM_USER0) + bio_offset(rsp->bio); + memcpy(buf, resp_data, rsp->data_len); + flush_kernel_dcache_page(bio_page(rsp->bio)); + kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0); + local_irq_enable(); + rsp->data_len = resp_data_len; + + out: + kfree(req_data); + kfree(resp_data); + return error; +} diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 2b8213b1832..b4f9368f116 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -45,7 +45,7 @@ void sas_scsi_recover_host(struct Scsi_Host *shost); int sas_show_class(enum sas_class class, char *buf); -int sas_show_proto(enum sas_proto proto, char *buf); +int sas_show_proto(enum sas_protocol proto, char *buf); int sas_show_linkrate(enum sas_linkrate linkrate, char *buf); int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf); @@ -80,6 +80,20 @@ struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy); void sas_hae_reset(struct work_struct *work); +#ifdef CONFIG_SCSI_SAS_HOST_SMP +extern int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, + struct request *rsp); +#else +static inline int sas_smp_host_handler(struct Scsi_Host *shost, + struct request *req, + struct request *rsp) +{ + shost_printk(KERN_ERR, shost, + "Cannot send SMP to a sas host (not enabled in CONFIG)\n"); + return -EINVAL; +} +#endif + static inline void sas_queue_event(int event, spinlock_t *lock, unsigned long *pending, struct work_struct *work, diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index a3fdc57e267..f869fba8680 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -108,7 +108,7 @@ static void sas_scsi_task_done(struct sas_task *task) break; case SAM_CHECK_COND: memcpy(sc->sense_buffer, ts->buf, - max(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size)); + min(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size)); stat = SAM_CHECK_COND; break; default: @@ -148,7 +148,6 @@ static struct sas_task *sas_create_task(struct scsi_cmnd *cmd, if (!task) return NULL; - *(u32 *)cmd->sense_buffer = 0; task->uldd_task = cmd; ASSIGN_SAS_TASK(cmd, task); @@ -200,6 +199,10 @@ int sas_queue_up(struct sas_task *task) */ int sas_queuecommand(struct scsi_cmnd *cmd, void (*scsi_done)(struct scsi_cmnd *)) + __releases(host->host_lock) + __acquires(dev->sata_dev.ap->lock) + __releases(dev->sata_dev.ap->lock) + __acquires(host->host_lock) { int res = 0; struct domain_device *dev = cmd_to_domain_dev(cmd); @@ -410,7 +413,7 @@ static int sas_recover_I_T(struct domain_device *dev) } /* Find the sas_phy that's attached to this device */ -struct sas_phy *find_local_sas_phy(struct domain_device *dev) +static struct sas_phy *find_local_sas_phy(struct domain_device *dev) { struct domain_device *pdev = dev->parent; struct ex_phy *exphy = NULL; diff --git a/drivers/scsi/libsas/sas_task.c b/drivers/scsi/libsas/sas_task.c new file mode 100644 index 00000000000..594524d5bfa --- /dev/null +++ b/drivers/scsi/libsas/sas_task.c @@ -0,0 +1,36 @@ +#include <linux/kernel.h> +#include <scsi/sas.h> +#include <scsi/libsas.h> + +/* fill task_status_struct based on SSP response frame */ +void sas_ssp_task_response(struct device *dev, struct sas_task *task, + struct ssp_response_iu *iu) +{ + struct task_status_struct *tstat = &task->task_status; + + tstat->resp = SAS_TASK_COMPLETE; + + if (iu->datapres == 0) + tstat->stat = iu->status; + else if (iu->datapres == 1) + tstat->stat = iu->resp_data[3]; + else if (iu->datapres == 2) { + tstat->stat = SAM_CHECK_COND; + tstat->buf_valid_size = + min_t(int, SAS_STATUS_BUF_SIZE, + be32_to_cpu(iu->sense_data_len)); + memcpy(tstat->buf, iu->sense_data, tstat->buf_valid_size); + + if (iu->status != SAM_CHECK_COND) + dev_printk(KERN_WARNING, dev, + "dev %llx sent sense data, but " + "stat(%x) is not CHECK CONDITION\n", + SAS_ADDR(task->dev->sas_addr), + iu->status); + } + else + /* when datapres contains corrupt/unknown value... */ + tstat->stat = SAM_CHECK_COND; +} +EXPORT_SYMBOL_GPL(sas_ssp_task_response); + |