diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_bsg.c')
-rw-r--r-- | drivers/scsi/lpfc/lpfc_bsg.c | 74 |
1 files changed, 61 insertions, 13 deletions
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 6760c69f525..c13e54760cb 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -3140,6 +3140,9 @@ lpfc_bsg_issue_mbox_ext_handle_job(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) unsigned long flags; uint32_t size; int rc = 0; + struct lpfc_dmabuf *dmabuf; + struct lpfc_sli_config_mbox *sli_cfg_mbx; + uint8_t *pmbx; spin_lock_irqsave(&phba->ct_ev_lock, flags); dd_data = pmboxq->context1; @@ -3156,7 +3159,19 @@ lpfc_bsg_issue_mbox_ext_handle_job(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) */ pmb = (uint8_t *)&pmboxq->u.mb; pmb_buf = (uint8_t *)dd_data->context_un.mbox.mb; + /* Copy the byte swapped response mailbox back to the user */ memcpy(pmb_buf, pmb, sizeof(MAILBOX_t)); + /* if there is any non-embedded extended data copy that too */ + dmabuf = phba->mbox_ext_buf_ctx.mbx_dmabuf; + sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt; + if (!bsg_bf_get(lpfc_mbox_hdr_emb, + &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr)) { + pmbx = (uint8_t *)dmabuf->virt; + /* byte swap the extended data following the mailbox command */ + lpfc_sli_pcimem_bcopy(&pmbx[sizeof(MAILBOX_t)], + &pmbx[sizeof(MAILBOX_t)], + sli_cfg_mbx->un.sli_config_emb0_subsys.mse[0].buf_len); + } job = dd_data->context_un.mbox.set_job; if (job) { @@ -3519,6 +3534,18 @@ lpfc_bsg_sli_cfg_read_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, /* state change */ phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT; + /* + * Non-embedded mailbox subcommand data gets byte swapped here because + * the lower level driver code only does the first 64 mailbox words. + */ + if ((!bsg_bf_get(lpfc_mbox_hdr_emb, + &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr)) && + (nemb_tp == nemb_mse)) + lpfc_sli_pcimem_bcopy(&pmbx[sizeof(MAILBOX_t)], + &pmbx[sizeof(MAILBOX_t)], + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[0].buf_len); + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) { lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, @@ -3575,7 +3602,7 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr); if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_MSE) { lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, - "2953 Handled SLI_CONFIG(mse) wr, " + "2953 Failed SLI_CONFIG(mse) wr, " "ext_buf_cnt(%d) out of range(%d)\n", ext_buf_cnt, LPFC_MBX_SLI_CONFIG_MAX_MSE); @@ -3593,7 +3620,7 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, ext_buf_cnt = sli_cfg_mbx->un.sli_config_emb1_subsys.hbd_count; if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_HBD) { lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, - "2954 Handled SLI_CONFIG(hbd) wr, " + "2954 Failed SLI_CONFIG(hbd) wr, " "ext_buf_cnt(%d) out of range(%d)\n", ext_buf_cnt, LPFC_MBX_SLI_CONFIG_MAX_HBD); @@ -3687,6 +3714,7 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, "2956 Failed to issue SLI_CONFIG ext-buffer " "maibox command, rc:x%x\n", rc); rc = -EPIPE; + goto job_error; } /* wait for additoinal external buffers */ @@ -3721,7 +3749,7 @@ lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, uint32_t opcode; int rc = SLI_CONFIG_NOT_HANDLED; - /* state change */ + /* state change on new multi-buffer pass-through mailbox command */ phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_HOST; sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt; @@ -3752,18 +3780,36 @@ lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, break; default: lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, - "2959 Not handled SLI_CONFIG " + "2959 Reject SLI_CONFIG " "subsys_fcoe, opcode:x%x\n", opcode); - rc = SLI_CONFIG_NOT_HANDLED; + rc = -EPERM; + break; + } + } else if (subsys == SLI_CONFIG_SUBSYS_COMN) { + switch (opcode) { + case COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "3106 Handled SLI_CONFIG " + "subsys_fcoe, opcode:x%x\n", + opcode); + rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job, + nemb_mse, dmabuf); + break; + default: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "3107 Reject SLI_CONFIG " + "subsys_fcoe, opcode:x%x\n", + opcode); + rc = -EPERM; break; } } else { lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, - "2977 Handled SLI_CONFIG " + "2977 Reject SLI_CONFIG " "subsys:x%d, opcode:x%x\n", subsys, opcode); - rc = SLI_CONFIG_NOT_HANDLED; + rc = -EPERM; } } else { subsys = bsg_bf_get(lpfc_emb1_subcmnd_subsys, @@ -3799,12 +3845,17 @@ lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, } } else { lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, - "2978 Handled SLI_CONFIG " + "2978 Not handled SLI_CONFIG " "subsys:x%d, opcode:x%x\n", subsys, opcode); rc = SLI_CONFIG_NOT_HANDLED; } } + + /* state reset on not handled new multi-buffer mailbox command */ + if (rc != SLI_CONFIG_HANDLED) + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_IDLE; + return rc; } @@ -4262,11 +4313,8 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, /* extended mailbox commands will need an extended buffer */ if (mbox_req->inExtWLen || mbox_req->outExtWLen) { - /* any data for the device? */ - if (mbox_req->inExtWLen) { - from = pmbx; - ext = from + sizeof(MAILBOX_t); - } + from = pmbx; + ext = from + sizeof(MAILBOX_t); pmboxq->context2 = ext; pmboxq->in_ext_byte_len = mbox_req->inExtWLen * sizeof(uint32_t); |