diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_bsg.h')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_bsg.h | 87 |
1 files changed, 65 insertions, 22 deletions
diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h index b542aca6f5a..c8c2b47ea88 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.h +++ b/drivers/scsi/lpfc/lpfc_bsg.h @@ -24,15 +24,17 @@ * These are the vendor unique structures passed in using the bsg * FC_BSG_HST_VENDOR message code type. */ -#define LPFC_BSG_VENDOR_SET_CT_EVENT 1 -#define LPFC_BSG_VENDOR_GET_CT_EVENT 2 -#define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3 -#define LPFC_BSG_VENDOR_DIAG_MODE 4 -#define LPFC_BSG_VENDOR_DIAG_TEST 5 -#define LPFC_BSG_VENDOR_GET_MGMT_REV 6 -#define LPFC_BSG_VENDOR_MBOX 7 -#define LPFC_BSG_VENDOR_MENLO_CMD 8 -#define LPFC_BSG_VENDOR_MENLO_DATA 9 +#define LPFC_BSG_VENDOR_SET_CT_EVENT 1 +#define LPFC_BSG_VENDOR_GET_CT_EVENT 2 +#define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3 +#define LPFC_BSG_VENDOR_DIAG_MODE 4 +#define LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK 5 +#define LPFC_BSG_VENDOR_GET_MGMT_REV 6 +#define LPFC_BSG_VENDOR_MBOX 7 +#define LPFC_BSG_VENDOR_MENLO_CMD 8 +#define LPFC_BSG_VENDOR_MENLO_DATA 9 +#define LPFC_BSG_VENDOR_DIAG_MODE_END 10 +#define LPFC_BSG_VENDOR_LINK_DIAG_TEST 11 struct set_ct_event { uint32_t command; @@ -67,10 +69,25 @@ struct diag_mode_set { uint32_t timeout; }; +struct sli4_link_diag { + uint32_t command; + uint32_t timeout; + uint32_t test_id; + uint32_t loops; + uint32_t test_version; + uint32_t error_action; +}; + struct diag_mode_test { uint32_t command; }; +struct diag_status { + uint32_t mbox_status; + uint32_t shdr_status; + uint32_t shdr_add_status; +}; + #define LPFC_WWNN_TYPE 0 #define LPFC_WWPN_TYPE 1 @@ -92,11 +109,15 @@ struct get_mgmt_rev_reply { }; #define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */ + +/* BSG mailbox request header */ struct dfc_mbox_req { uint32_t command; uint32_t mbOffset; uint32_t inExtWLen; uint32_t outExtWLen; + uint32_t extMboxTag; + uint32_t extSeqNum; }; /* Used for menlo command or menlo data. The xri is only used for menlo data */ @@ -171,7 +192,7 @@ struct lpfc_sli_config_mse { #define lpfc_mbox_sli_config_mse_len_WORD buf_len }; -struct lpfc_sli_config_subcmd_hbd { +struct lpfc_sli_config_hbd { uint32_t buf_len; #define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT 0 #define lpfc_mbox_sli_config_ecmn_hbd_len_MASK 0xffffff @@ -194,21 +215,39 @@ struct lpfc_sli_config_hdr { uint32_t reserved5; }; -struct lpfc_sli_config_generic { +struct lpfc_sli_config_emb0_subsys { struct lpfc_sli_config_hdr sli_config_hdr; #define LPFC_MBX_SLI_CONFIG_MAX_MSE 19 struct lpfc_sli_config_mse mse[LPFC_MBX_SLI_CONFIG_MAX_MSE]; + uint32_t padding; + uint32_t word64; +#define lpfc_emb0_subcmnd_opcode_SHIFT 0 +#define lpfc_emb0_subcmnd_opcode_MASK 0xff +#define lpfc_emb0_subcmnd_opcode_WORD word64 +#define lpfc_emb0_subcmnd_subsys_SHIFT 8 +#define lpfc_emb0_subcmnd_subsys_MASK 0xff +#define lpfc_emb0_subcmnd_subsys_WORD word64 +/* Subsystem FCOE (0x0C) OpCodes */ +#define SLI_CONFIG_SUBSYS_FCOE 0x0C +#define FCOE_OPCODE_READ_FCF 0x08 +#define FCOE_OPCODE_ADD_FCF 0x09 }; -struct lpfc_sli_config_subcmnd { +struct lpfc_sli_config_emb1_subsys { struct lpfc_sli_config_hdr sli_config_hdr; uint32_t word6; -#define lpfc_subcmnd_opcode_SHIFT 0 -#define lpfc_subcmnd_opcode_MASK 0xff -#define lpfc_subcmnd_opcode_WORD word6 -#define lpfc_subcmnd_subsys_SHIFT 8 -#define lpfc_subcmnd_subsys_MASK 0xff -#define lpfc_subcmnd_subsys_WORD word6 +#define lpfc_emb1_subcmnd_opcode_SHIFT 0 +#define lpfc_emb1_subcmnd_opcode_MASK 0xff +#define lpfc_emb1_subcmnd_opcode_WORD word6 +#define lpfc_emb1_subcmnd_subsys_SHIFT 8 +#define lpfc_emb1_subcmnd_subsys_MASK 0xff +#define lpfc_emb1_subcmnd_subsys_WORD word6 +/* Subsystem COMN (0x01) OpCodes */ +#define SLI_CONFIG_SUBSYS_COMN 0x01 +#define COMN_OPCODE_READ_OBJECT 0xAB +#define COMN_OPCODE_WRITE_OBJECT 0xAC +#define COMN_OPCODE_READ_OBJECT_LIST 0xAD +#define COMN_OPCODE_DELETE_OBJECT 0xAE uint32_t timeout; uint32_t request_length; uint32_t word9; @@ -222,8 +261,8 @@ struct lpfc_sli_config_subcmnd { uint32_t rd_offset; uint32_t obj_name[26]; uint32_t hbd_count; -#define LPFC_MBX_SLI_CONFIG_MAX_HBD 10 - struct lpfc_sli_config_subcmd_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD]; +#define LPFC_MBX_SLI_CONFIG_MAX_HBD 8 + struct lpfc_sli_config_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD]; }; struct lpfc_sli_config_mbox { @@ -235,7 +274,11 @@ struct lpfc_sli_config_mbox { #define lpfc_mqe_command_MASK 0x000000FF #define lpfc_mqe_command_WORD word0 union { - struct lpfc_sli_config_generic sli_config_generic; - struct lpfc_sli_config_subcmnd sli_config_subcmnd; + struct lpfc_sli_config_emb0_subsys sli_config_emb0_subsys; + struct lpfc_sli_config_emb1_subsys sli_config_emb1_subsys; } un; }; + +/* driver only */ +#define SLI_CONFIG_NOT_HANDLED 0 +#define SLI_CONFIG_HANDLED 1 |